Database Users

Help and advice with CID and Artemis Touch 3.01

Ok so I have a O2 orbit with windows mobile 6 offical from their website. But then I seen this:
http://forum.xda-developers.com/showthread.php?t=342298
Thought it looked intresting and wanted to flash my device. Not knowing which version meschle use i thought it was best to unlock my CID first. I used step one in his package and after waitng for over half an hour the command application didnt get past Initalizing.
I then went to here:
http://forum.xda-developers.com/showthread.php?t=311403
And downloaded it directly and tried again, but still exactly the same result.
So now iv downgraded my phone to the original windows mobile 5 ROM that I found again on this site and tried the CID unlocking again but still nothing.
My question is what should I do about this situation ?
Is the meschles ROM based on the O2 original package and will I be ok not CID unlocking ?
Any suggestions on another way I can CID unlock?
Thankd for your time,

Is it Vsita system?
Anthony2oo5 said:
Ok so I have a O2 orbit with windows mobile 6 offical from their website. But then I seen this:
http://forum.xda-developers.com/showthread.php?t=342298
Thought it looked intresting and wanted to flash my device. Not knowing which version meschle use i thought it was best to unlock my CID first. I used step one in his package and after waitng for over half an hour the command application didnt get past Initalizing.
I then went to here:
http://forum.xda-developers.com/showthread.php?t=311403
And downloaded it directly and tried again, but still exactly the same result.
So now iv downgraded my phone to the original windows mobile 5 ROM that I found again on this site and tried the CID unlocking again but still nothing.
My question is what should I do about this situation ?
Is the meschles ROM based on the O2 original package and will I be ok not CID unlocking ?
Any suggestions on another way I can CID unlock?
Thankd for your time,
Click to expand...
Click to collapse

No windows XP pro, service pack 2. With all the updates up to today and im logged in as administrator.
Sorry for not adding this and thanks for your reply.

have you deleted any sync'd devices and then plugged your phone in, then when active sync finds the device just press cancel so that it adds the device as guest. this worked for me!

No I didnt do that but I seemed to have got it to work.
I used a different machine which had just been formatted with windows XP service pack 2 and because this software is old, I downloaded activsync 4.2 onto that machine and it worked first go.
Another problem im having which is on both machines now. When I run the RUU, it gets the image version of my phone, but it says upgrade to image version 1.000000 see below.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
It happened on version 3.0 and 3.01 from multiple download sources. If you continue it gets to 3% and stops saying file is currupt.
Any help ?
Thanks for everyone who offered help.

Put cert_SPCS and EnableRapi on storage card>zip, then install them.
Then try to flash another time.

Missing...
1. Transfer Cert_SPCS.cab and EnableRapi.cab to your phone
2. Run Cert_SPCS.cab FIRST and EnableRapi.cab SECOND
if there's a popup asking you to allow installation select YES
3. SoftReset your device

Ok finally i got it to work.
I used the other machine that managed to run the application properly. After that process had finished, i started step 2 straight away een though the screen of my phone was white. this worked with no problems. Last time I was restarting the phone to get rid of the white screen.
Never used the above method by coccobabbo, but could you explain it to me ? What are those applications ?
Will use that next time a new ROM comes out.
Thanks again everyone.

Anthony: That's basically the same as flashing USPL from the PC, but without a PC. You can also call it "Vista solution"

[Q] CX919 II Firmware

Hey guys,
Hopefully someone can help me...
Background: I bought this CX919 II, setup the device so that it displays in 1080p, install XBMC, and it only shows 720p. Do a bit of reading and find out that it's probably upscaling and there's a separate 1080p firmware, so of I go...
Problem: So I flash the stick with the steps below, everything seems to go okay, except when I plug the stick back into the tv, nothing happens... How do I get my device back?
1 ) Download Rockchip Batch Tool and extract
2 ) Put the USB cable into theOTG port of the CX919 II, hold the reset button and plug it into the pc.
3 ) Windows looks for driver, I send it to the correct location, it finds the drivers, no problem
4) Add SUPPORTLOWUSB=TRUE and FULLSPEEDUSB=TRUE to the config.ini file (otherwise it doesn't detect the device)
5 ) Start Rockchip Batch Tool v1.7. It finds the device and shows a green box
6) I select the 1080p firmware (which I got here)
7) Click on the restore button and wait patiently for the success message
8) Success message is displayed.
9) Unplug device, plug device into tv
10) Device has power, but tv tells me that there is no device connected.
So, where did I go wrong? And how can I fix the device?
I did manage to get some sign of life by using this firmware (I assume that this is the manufaturer), except all I see with this are just four flashing penguins in the top left corner.
Before it died, this is what the software info looked like..
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

FYI, here's the firmware that worked for me, if anyone else is interested:
cyxtech_rk31_809iii_8723bs_141216_4.4_8g1g

Same problem
TheAlteredState said:
FYI, here's the firmware that worked for me, if anyone else is interested:
cyxtech_rk31_809iii_8723bs_141216_4.4_8g1g
Click to expand...
Click to collapse
Hi
I've got the exact same issue as you. After trying to root my CX919 CYX_809III V5_2 I ended up with no HDMI signal :crying:
After downloading (so fare) 10 different firmware, I've only got one of them to show 4 flashing penguins in the top left corner.
Hopefully your linked firmware in post #2 will work. Had difficulty getting the download page loaded, but it seems like I'm able to download now through South Korean VPN.
I guess the file contains only one .img file to be flashed as system file in Rom Flash Tool.
Do you mind telling me what ROM you used to get correct Loader, parameter, misc, kernel, boot and recovery files.
Regards mjolne

mjolne said:
Hi
I've got the exact same issue as you. After trying to root my CX919 CYX_809III V5_2 I ended up with no HDMI signal :crying:
After downloading (so fare) 10 different firmware, I've only got one of them to show 4 flashing penguins in the top left corner.
Hopefully your linked firmware in post #2 will work. Had difficulty getting the download page loaded, but it seems like I'm able to download now through South Korean VPN.
I guess the file contains only one .img file to be flashed as system file in Rom Flash Tool.
Do you mind telling me what ROM you used to get correct Loader, parameter, misc, kernel, boot and recovery files.
Regards mjolne
Click to expand...
Click to collapse
If you have any problems, let me know. I'll share it with you via simpler methods.
I didn't use anything special, just used batch tool (which I think is included in the zip) to flash the firmware file, and everything worked.

Stick working again
TheAlteredState said:
If you have any problems, let me know. I'll share it with you via simpler methods.
I didn't use anything special, just used batch tool (which I think is included in the zip) to flash the firmware file, and everything worked.
Click to expand...
Click to collapse
Successfully restored back to stock firmware.
Everything went like clockwork :victory:
Now the hunt for root access starts again...

TheAlteredState said:
FYI, here's the firmware that worked for me, if anyone else is interested:
cyxtech_rk31_809iii_8723bs_141216_4.4_8g1g
Click to expand...
Click to collapse
can u tell me what rom is it?it 4.4 android and it support 1080
can u send me the download link ,i cant download from the link u share

zdns said:
can u tell me what rom is it?it 4.4 android and it support 1080
can u send me the download link ,i cant download from the link u share
Click to expand...
Click to collapse
It's the factory image. It is 4.4 and 1080p.
Try this link.

TheAlteredState said:
It's the factory image. It is 4.4 and 1080p.
Try this link.
Click to expand...
Click to collapse
thanks for your help
i have this mini pc, u think the rom it work good for my device?

zdns said:
thanks for your help
i have this mini pc, u think the rom it work good for my device?
Click to expand...
Click to collapse
I have the same one.
Seems to work okay as far as I've seen. Haven't had any problems, although I haven't found many ROM's that actually work for me to compare it to

TheAlteredState said:
I have the same one.
Seems to work okay as far as I've seen. Haven't had any problems, although I haven't found many ROM's that actually work for me to compare it to
Click to expand...
Click to collapse
thanks for your help i try it
how can i install it? which program tool u use?
because i try to install it and when i connect it to tv nothing happen
can u help me plz?

Batch tool, it should be inside the zip...

i try but nothing happen can someone plz help me?
i try to install it with the batch tools but when i pukg it to tv it;s no signal

Can you open it and take pics of the inside? Mine is V5.2, maybe your's is something else...

1080P Firmware
I managed to activate real 1080p on this model: CYX_809III V5_2 20141105 RTL8723BS. Please see:
http://forum.xda-developers.com/android/development/guide-real-1080p-cyx809iii-v52-20141105-t3109734

IMEI Null, Baseband/Modem unknown, missing files

Hello guys.
I am really tired of looking for a fix for my problem. I am asking for help rarely and today is that day that I need your fast help with fixing my phone.
So...
I wanted to create a backup of 2 partitions - modemst1 and modemst2.
I have used the command "reboot nvbackup" - phone restarted, but no files created in backup and restarted already without IMEI code, and then I realized that phone is not recognizing SIM card.
First thing I have thought of - okay, lets reflash this thing. That's what I did, never with a success. I have tried flashing the original Samsung software into my phone, no help.
Tried to enter to service mode to fix it - nope - just blank window with rows, probably because SIM is not recognized.
Full wipe? Didn't help. Busybox and GSII_Repair neither.
Then by browsing root stuff I found out that I am missing 2 files:
- /dev/block/mmcblk0p10
- /dev/block/mmcblk0p11
I think that might be a problem which needs to be fixed. (I have tried to backup those two files, with no success, and as it seems, I have probably deleted the accidentally)
I was thinking if someone can back those blocks up and send the images to me so I can somehow recover those two files (Lollipop)
I have no backup of EFS folder.
I have tried to flash the modem.bin from stock firmware, no luck, no fix.
So I am looking for help from you guys, you are my last hope to get that thing fixed.
Problems to fix:
No SIM detected
No GSM signal
Unknown Modem version
Null IMEI
Missing files in /dev/block folder
EDIT: I promise that I will create a guide if I will fix it. But I need to fix it by tomorrow.

It will be nice if somebody can make an image of working EFS partition of his/her Note 3 and send it to me. After that I will check out if it works.

Almost 100 views, and still no answer? Is it that bad?

You need download file PIT and flash fw
JustCinek1 said:
Hello guys.
I am really tired of looking for a fix for my problem. I am asking for help rarely and today is that day that I need your fast help with fixing my phone.
So...
I wanted to create a backup of 2 partitions - modemst1 and modemst2.
I have used the command "reboot nvbackup" - phone restarted, but no files created in backup and restarted already without IMEI code, and then I realized that phone is not recognizing SIM card.
First thing I have thought of - okay, lets reflash this thing. That's what I did, never with a success. I have tried flashing the original Samsung software into my phone, no help.
Tried to enter to service mode to fix it - nope - just blank window with rows, probably because SIM is not recognized.
Full wipe? Didn't help. Busybox and GSII_Repair neither.
Then by browsing root stuff I found out that I am missing 2 files:
- /dev/block/mmcblk0p10
- /dev/block/mmcblk0p11
I think that might be a problem which needs to be fixed. (I have tried to backup those two files, with no success, and as it seems, I have probably deleted the accidentally)
I was thinking if someone can back those blocks up and send the images to me so I can somehow recover those two files (Lollipop)
I have no backup of EFS folder.
I have tried to flash the modem.bin from stock firmware, no luck, no fix.
So I am looking for help from you guys, you are my last hope to get that thing fixed.
Problems to fix:
No SIM detected
No GSM signal
Unknown Modem version
Null IMEI
Missing files in /dev/block folder
EDIT: I promise that I will create a guide if I will fix it. But I need to fix it by tomorrow.
Click to expand...
Click to collapse
one more solution.
You need download firmware have 5 files. inside have file .pit and flash it using Odin. Step-by-step flash it. this is wrong/error partition EFS. or you need download file .pit for your device exp: .pit N9005 using only for N9005, you choose PIT location on odin. Remember you need tick to Re-Patition.
Good Luck!
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

Your stuff didn't help me at all, sorry. It was the same after these things which You told me. But I have fixed it and you can mark this thread as solved. I am currently writing a guide what to do to fix that stuff.

Lenovo K3 note, unbrick guide (stock rom installation process)

Required tools:
1. Sp Flash tool mod edit - link removed
2. Drivers mod edit - link removed
3. Firmwares: K50a40mod edit - link removed
Other Varients:mod edit - link removed
4. Windows pc
5. Lenovo K3 Note(ofcorse )
Before doing this, Take Nvram(imei) backup:mod edit - link removed
Download all required files, then unzip.
install drivers, if device not showingin spflash tool(put your pc advanced startup with driver signature enforcement then install drivers)
Stock rom Installation process:
1.Open sp Flash tool.
goto options(located on top left corner)
then select download, in DA DL ALL checksum options tick on both>> USB checksum and Storage checksum(close this window)
2. select scatter-Loading-File from firmware folder.
3. select Download only. (if u select format all+download your imei numbers will be gone)
4. Then click on download button.
5. switch off your mobile, then remove battery and re insert it, then connect
Big right mark will appear after success.
Follow all instructions carefully,
Don't blame me if anything went wrong.
plz download drivers from given link.
use latest spFlashTool.
Press Thanks if my process work.
Thumbs up.:good:

Hi man,
at first I want to thank you, this helped me to unbrick my phone, but ofcourse I did deleted my IMEI, SN and so on.
I know there are few ways how to change it, but none seems to work for me so far. I have the right drivers (v 1.1.13), but not any program is able to connect to my phone except to SP flash tool.
So my question is. Is there any way how to root this version of andriod?
I have already tried Kingroot, RomasteruSU, framaroot and not even MTK Engineering mode was not able to help me change IMEI.
Thanks in advance
M

enterthename said:
Hi man,
at first I want to thank you, this helped me to unbrick my phone, but ofcourse I did deleted my IMEI, SN and so on.
I know there are few ways how to change it, but none seems to work for me so far. I have the right drivers (v 1.1.13), but not any program is able to connect to my phone except to SP flash tool.
So my question is. Is there any way how to root this version of andriod?
I have already tried Kingroot, RomasteruSU, framaroot and not even MTK Engineering mode was not able to help me change IMEI.
Thanks in advance
M
Click to expand...
Click to collapse
https://forum.xda-developers.com/k3-note/help/null-invalid-imei-permanent-fix-100-t3472491
follow this tutorial..

panuganties said:
https://forum.xda-developers.com/k3-note/help/null-invalid-imei-permanent-fix-100-t3472491
follow this tutorial..
Click to expand...
Click to collapse
Hi,
tried to do exactly what is there, but still no luck. I had only APDB before, so I hoped to be successfull this time with MD1_DB.
But what happened. I already had drives and SN writer (2.1504), but downloaded older version (1.1728) anyway. Got into point where phone was connected and in meta mode. The newer version of SN Writer gave me error message pretty fast and calceled meta mode. See SN writers error message img. below.
I have also tried older version, it took bit more time, then it asked me to fill my IMEI for a second time, but ended up with error message again after that. The only thing different was that phone stayed in meta mode. Put second print screen error as well.
Any suggestions?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

enterthename said:
Hi,
tried to do exactly what is there, but still no luck. I had only APDB before, so I hoped to be successfull this time with MD1_DB.
But what happened. I already had drives and SN writer (2.1504), but downloaded older version (1.1728) anyway. Got into point where phone was connected and in meta mode. The newer version of SN Writer gave me error message pretty fast and calceled meta mode. See SN writers error message img. below.
I have also tried older version, it took bit more time, then it asked me to fill my IMEI for a second time, but ended up with error message again after that. The only thing different was that phone stayed in meta mode. Put second print screen error as well.
Any suggestions?
Click to expand...
Click to collapse
press and hold volume- and insert usb cable..

thread closed until the download links will be available

US996 IMEI null - 0's - How Do I Fix THIS?

After doing an official LG Bootloader Unlock and installing TWRP, I accidentally restored the EFS partition from my other US996 when attempting to "clone" it (not the IMEI, though, of course).
First thing that happened was a RED exclamation triangle (instead of ORANGE) with CORRUPT message, no boot.
So, I used LGUP to upgrade and was back to stock, locked bootloader.
When I tried to "fastboot unlock unlock.bin", I got an error. The IMEI shown was all zeros and the message, naturally said "Invalid unlock.bin file".
I used the DirtySanta method to unlock/TWRP/SuperSU, but, even though I could get into TWRP recovery, in normal boot, the phone wants a secure boot password and gives me 22 of 30 tries left.
So, I did LGUP again and I'm back where i was before DirtySanta.
How do I fix THIS:?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
PLEASE HELP. :fingers-crossed:

follow this guide https://www.androidbrick.com/ultima...-xiaomi-mi5-imei-and-baseband-repair-fix/amp/

mohsin931 said:
follow this guide https://www.androidbrick.com/ultima...-xiaomi-mi5-imei-and-baseband-repair-fix/amp/
Click to expand...
Click to collapse
Thanks, but... After spending over an hour, I can't get the diagnostic ports to show on my PC. I used HiddenMenuCall.apk to get to the service menu and enabled the ports on the phone, installed the port drivers and all other software in the guide except ADB platform tools (have it) and the video that shows the procedure to hex edit the file is impossible to follow because the command window is illegible.
Anyone want a useless US996?
Going through this crap just isn't worth the $132.50 the phone cost me. I'd just as soon buy another one. I only got it as a tester/backup so I don't screw up my good one by messing with ROMs.

Try Keypad *#546368#*996#-->SVC Menu-->CRCWIZARD Test-->(Auto MID tab) & try typing in your details there (IMEI - Wifi MAC - BT Address etc)

Prowler_gr said:
Try Keypad *#546368#*996#-->SVC Menu-->CRCWIZARD Test-->(Auto MID tab) & try typing in your details there (IMEI - Wifi MAC - BT Address etc)
Click to expand...
Click to collapse
That keypad code doesn't work, but I got to the menu using HiddenMenuCall.apk.
I plugged in the IMEI and WOOHOO!!! after rebooting, ALL THE FIELDS ARE FILLED PROPERLY!!
THANK YOU PROWLER!!!!

HelloG3_MotoNoMore said:
That keypad code doesn't work, but I got to the menu using HiddenMenuCall.apk.
I plugged in the IMEI and WOOHOO!!! after rebooting, ALL THE FIELDS ARE FILLED PROPERLY!!
THANK YOU PROWLER!!!!
Click to expand...
Click to collapse
Have in mind this is just a temporary fix (you may need to re-apply after a full wipe).

Prowler_gr said:
Have in mind this is just a temporary fix (you may need to re-apply after a full wipe).
Click to expand...
Click to collapse
I have my doubts, but I'll let you know. This one's just a test-toy anyway.
Thanks again.

Prowler_gr said:
Have in mind this is just a temporary fix (you may need to re-apply after a full wipe).
Click to expand...
Click to collapse
Did a full wipe. All fields stay filled, unlock.bin still works. All better. Thanks again.

HelloG3_MotoNoMore said:
Did a full wipe. All fields stay filled, unlock.bin still works. All better. Thanks again.
Click to expand...
Click to collapse
Happy to hear it's all working for you...

Prowler_gr said:
Try Keypad *#546368#*996#-->SVC Menu-->CRCWIZARD Test-->(Auto MID tab) & try typing in your details there (IMEI - Wifi MAC - BT Address etc)
Click to expand...
Click to collapse
So you press MID WRITE? got to it by installing hidden menu app but nothing happens when pressing write. I only entered imei as I only have that now

Ok, now it worked after some messing around. entered imei from back of phone and the others from settings and it seems to stick but not radio still. Maybe it dos not have the right bands, I'm in Norway. But my VS995 and F800 have no radio problems