Hello,
I installed SPB Pocket Plus, then I reboot, since then my mobile stops in the boot screen.
Is there a way to boot in safe mode? (I tryied to boot holding the two upper buttons, failed.)
Is there a way to format the mobile before booting?
If I need to reinstall EVERYTHING, how do I do it? Using the USB cable? Where do I get the ROM? How do I procede installing the rom?
Please, I would REALLY appreciate any suggestion,
I am in panic.
Thanks.
same here! don't know what to do, a hear an alarm tune and then it stops...
I did a hard reset now...
A quick Google search got me HERE.
Press and hold both the Comm Mannager Button and the Voice Command Button
While keeping those two buttons pressed, press the Reset Button with your stylus
After about a second you will be prompted for confirmation. Press the Talk Button to confirm
Click to expand...
Click to collapse
Additionally, if you can still connect to your desktop by USB Cable, you should be able to remove the offending software with ActiveSync without hard-reseting.
thank you so much, but I had to hard-reset my device, I lost everything, damn!
that's how i did it:
Plug the device on power
Turn on your device
1. Press simultaneously the 2 upper buttons (comm. & voice) and keep them pressed
2. After 3 s press the soft reset button and keep it pressed for 3 s, (comm. & voice are still pressed)
3. Release soft reset button., (comm. & voice are still pressed)
4. Don’t release comm. & voice buttons until you see on the black screen some Instructions to format your drive.
5. release comm. & voice buttons
6. press call button to start format your drive.
Thank you both for the attention,
KidNapped
Hi, I am having problems getting my X2 into boot mode in order to update the firmware to MR1- I've followed the instructions on SE Update Service (press and hold volume down button and power button until white screen appears)
All that happens is the vibration feedback to indicate power on, then the phone loads up as normal with the logo in a black background???? anyone else come across this?
help me X2
hi all fri
i had one sony x2 ,but have some problem !can you tell me how to enter undate mode !and X2 chinese rom! thanks
do you press and HOLD both buttons till the desired screen appears? Should not release Power button before the screen emerges..
Yes I did, It's just loads up as normal, I have the xperia x1 so I'm not new to this devices, anyone experienced this before?
Are you sure that you are doing it exactly like this:
1. Remove and re-insert battery.
2. Press AND HOLD the volume down button.
3. Press AND HOLD the power button at the same time.
Hold the two buttons (and no other buttons) until logo on white background appears.
The order is important, first the volume down button - keep pressed, then the power button - keep both pressed.
The most important thing that many people miss is...
You must NOT have the USB cable plugged in when you do this. Only plug the phone in after the white screen appears.
This is not my first xperia as I still have the x1, so I do know what I'm doing, the phone boots up as normal (sony ericsson logo with the 'black' background) unlike the x1 with the tricolor screen. Is there anyother way to enter the bootloader or reset the whole ROM? someone please help as I can't update my phone and spony ericssonwon't do anything about it because it hasn't been officially released in the UK :S
i have the same issue tryed every thing (volume down + power =nothing. volume down + power +soft reset button= nothing. look in the registry found nothing relevant to bootloader )i think bootloder got messed up or something. is there a folder or something containing the bootloder
adidas35th said:
Hi, I am having problems getting my X2 into boot mode in order to update the firmware to MR1- I've followed the instructions on SE Update Service (press and hold volume down button and power button until white screen appears)
All that happens is the vibration feedback to indicate power on, then the phone loads up as normal with the logo in a black background???? anyone else come across this?
Click to expand...
Click to collapse
Exactly the same problem
same here, very frustrated, need my phone back to factory settings! any1 help please???
It's important that you normally turn off the phone before getting out the battery or it will reboot normally when the battery is inserted.
X2 DEAD
I also have the same problem as my device does not turn on nor k is functioning BOOTLOADER MODE.
only once beats vibrating k after the computer sees an unknown device.
I left my phone in few mobile services, nobody did any good to it - same problem still left. Last chance will be SE service.
do u find solution to repair your x2
do u find solution to repair your x2
No.. my phone few weeks ago went dead (after installing custom cab's)..now its only peace of trash
Giz1984 said:
same here, very frustrated, need my phone back to factory settings! any1 help please???
Click to expand...
Click to collapse
To get back into factory-defaults, then use the Phone reset found under Settings->System. That will re-install everything.
My S10 Plus's volume panel is stuck on my screen with two of them also being greyed out. The device will not power off as the panel blocks the power off icon. Holding the power button to turn off also doesn't work. What the actual F?
can you connect it to a computer and adb reboot? Then uninstall whatever you installed to break your phone!
I had the same problem and fixed via a hard reset by holding down the power and volume up button at the same time. The phone resets and voila problem solved
Hi i have a Fossil q explorist 3 and im having trouble getting into recovery mode.
I uninstalled an app on the watch and its now in a weird bootloop/ unusable state it flashes the watch face and i can access google assistant but nothing else apart from the power off and reboot menu.
Because of this the battery depleted pretty quickly and i couldnt access the recovery menu, I managed to get to the menu once but hit the wrong button and it exited rather than let me reset it
Can anyone help me get the watch into recovery mode I have tried
1. Powering off the watch via the menu and trying the button combinations of top button and power ,bottom button and power , letting go of the power button and holding either button and repeatedly pressing the buttons after the vibration when it turns on.
2. I have also tried tapping on the fossil logo on the screen after it turns on and sliding from the top left to bottom right of the screen and nothing has got me back in to the recovery menu.
So does anyone know how to get in to that menu also i opened up the watch and see a few test points if that could be used i dont mind trying to solder/bodge a usb connection if that would be an option
Cheers in advance
Not one person ????? NOBODY has an answer?? I think we should all file a class action law suit on Fossil.
Try with adb, use it with either bluetooth or wifi and once it's connected to your pc type "adb reboot recovery"
Same issue with my fossil watch.. deleted something and its blinking since .. cn anyone help with the instructions to factory reset with buttons
Anyone successful ? I am having issue as mentioned in the original post. Please help!
Hi i have a Fossil q explorist 3 and im having trouble getting into recovery mode.
I uninstalled an app on the watch and its now in a weird bootloop/ unusable state it flashes the watch face and i can access google assistant but nothing else apart from the power off and reboot menu.
Because of this the battery depleted pretty quickly and i couldnt access the recovery menu, I managed to get to the menu once but hit the wrong button and it exited rather than let me reset it
Can anyone help me get the watch into recovery mode I have tried
1. Powering off the watch via the menu and trying the button combinations of top button and power ,bottom button and power , letting go of the power button and holding either button and repeatedly pressing the buttons after the vibration when it turns on.
2. I have also tried tapping on the fossil logo on the screen after it turns on and sliding from the top left to bottom right of the screen and nothing has got me back in to the recovery menu.
So does anyone know how to get in to that menu also i opened up the watch and see a few test points if that could be used i dont mind trying to solder/bodge a usb connection if that would be an option
Cheers in advance
I have posted this in wear os forum too but have had no replies hope someone in here can help.