Hello,
I installed SPB Pocket Plus, then I reboot, since then my mobile stops in the boot screen.
Is there a way to boot in safe mode? (I tryied to boot holding the two upper buttons, failed.)
Is there a way to format the mobile before booting?
If I need to reinstall EVERYTHING, how do I do it? Using the USB cable? Where do I get the ROM? How do I procede installing the rom?
Please, I would REALLY appreciate any suggestion,
I am in panic.
Thanks.
same here! don't know what to do, a hear an alarm tune and then it stops...
I did a hard reset now...
A quick Google search got me HERE.
Press and hold both the Comm Mannager Button and the Voice Command Button
While keeping those two buttons pressed, press the Reset Button with your stylus
After about a second you will be prompted for confirmation. Press the Talk Button to confirm
Click to expand...
Click to collapse
Additionally, if you can still connect to your desktop by USB Cable, you should be able to remove the offending software with ActiveSync without hard-reseting.
thank you so much, but I had to hard-reset my device, I lost everything, damn!
that's how i did it:
Plug the device on power
Turn on your device
1. Press simultaneously the 2 upper buttons (comm. & voice) and keep them pressed
2. After 3 s press the soft reset button and keep it pressed for 3 s, (comm. & voice are still pressed)
3. Release soft reset button., (comm. & voice are still pressed)
4. Don’t release comm. & voice buttons until you see on the black screen some Instructions to format your drive.
5. release comm. & voice buttons
6. press call button to start format your drive.
Thank you both for the attention,
KidNapped
Related
Can someone please advise me, I've brought the Xda Mini S today. I am trying to pefrorm a hard reset and following the instructions from the user manual but it keeps on performing a Soft Reset instead.
What do I do? Please help!
start / settings / system / clear storage enter 1234 and away you go!
Thank you very much Lord Buckingham, it's done now!
Thanks again!
So why doesn't the manual say this, and they way it says doesn't work?
I had same prob, so did a quick search on here. Great wealth of information!
some of users said they were able to do hard reset by buttons,
holding those buttons and quickly pushing soft reset, they said it realy hard to find moment to release buttons...
anyone know the button combo? TIA
hard reset procedure: hold comm manager button (the one on the left), power (on the top) and voice dial button (the one on the right) at same time, and while holding them press soft reset buttton. realise soft reset button (stil holding top 3 buttons and format screen will appear. pres green button and that's it.
wow that's a lot of buttons! will try that the next time i do a HR. thanks
My manual states comm manager button, voice comm button together then reset button
XDA-PLUS said:
My manual states comm manager button, voice comm button together then reset button
Click to expand...
Click to collapse
Thats correct.
No need for the power button to hold.
have anyone gotten that to work..boy have I tried..but I never seem to find the right timing
lynxlynx said:
have anyone gotten that to work..boy have I tried..but I never seem to find the right timing
Click to expand...
Click to collapse
There is no timing...
Just press and hold comm. button and the voicedial button.
Than put your stylus for one sec on the reset hole and still hold the 2 buttons mentioned above.
Than the phone will boot and you will see a screen asking you to press the (green) send button to hardreset.
Panja said:
XDA-PLUS said:
My manual states comm manager button, voice comm button together then reset button
Click to expand...
Click to collapse
Thats correct.
No need for the power button to hold.
Click to expand...
Click to collapse
i had the same problem with hard reset yesterday (my first hard reset ever . after a few tries i found that most proper way to hard reset device is:
1) press & hold comm button + voice dial button
2) press reset button (while holding buttons mentioned above)
3) KEEP HOLDING comm & voice dial buttons
4) after a while hard reset is done, so we can release all buttons
big thx eva_d!
arrggh!
This has been the best forum i have come accross. My phone function ends up as being a blank in the task manager and i constantly by mistake quit i while i am trying to quit something else. a proper pain...
I am tryin to hard reset the phone so i can set it up in corporate mode...i just seem to be completely unableto get it...i have been trying to hold the two buttons and press reset while still holding the two buttons....five minutes later still nothing....arrgh. Any solutions.... :shock:
This is from the manual:
To perform a hard reset
1. Press and hold the Comm Manager button and Voice Command
button on the device.
2. Keep the two buttons pressed, and at the same time, use the
stylus to lightly press and hold the RESET button.
Click to expand...
Click to collapse
it is frustrating at first but it is easier with practice. in my experience i released the stylus after about 5 secs and i was prompted with a question if I wanted to format the device [hit send button to start]
Do you really need hard reset?
Did you try clear storage?
Some times it is enough to clear your phone...
If you're feeling generous, can you try hardreset using VJEschaton?
I've never tested it on WM5 hardware, I haven't had a good reason to hardreset yet.
V
VJEshscaton now works on the Wizard, although I think there are easier ways to reset our phones Eg, using them!
V
fresh123breeze said:
Do you really need hard reset?
Did you try clear storage?
Some times it is enough to clear your phone...
Click to expand...
Click to collapse
Is there any difference?
Because i tried that and i think they do the same job!!!
hi, after instaling pretty much of applications on my wizard it just stopped respond. if u do a soft reset it boots but freezest on todays screen and thats it. there is a massage dispalied "low memory". i cannot do a hard reset, upgrade rom anything. is there any other way to perform a hard reset ?? (i tried comm mnr+voice+plus soft reste) HELP !!!
cheers, matt
Some people have joy with - turn off - press and hold comm, record and camera buttons and press power on.
If that fails you should be able to flash your device with the same rom. Turn off, press camera button and hold then press power button and bootloader multicolored screen should come up. Connect via usb to pc and reflash rom.
Can anyone guide me how to hard re-set Wizard (Qtek 9100)
all i can do is soft-reset. I cannot find any button which could hard-reset it.
Start->settings->system->clear storage
Alternatively you can hold down the voice command button and comm manager button then press the tiny hole on the side with your stylus. (i think thats correct perhaps someone can refresh my memory)
Press & hold the Comm Manger button & Voice Command button on the device.
Keep the two buttons pressed and at the same time use the stylus to lightly press & hold the RESET button.
check for wizard manual @ xda ftp site..
aamer said:
Can anyone guide me how to hard re-set Wizard (Qtek 9100)
all i can do is soft-reset. I cannot find any button which could hard-reset it.
Click to expand...
Click to collapse
um, couldn't you have searched for this??? sigh.
--M
I've just hard reset my phone this weekend :
1) Press & hold the Comm Manger button and Voice Command button on the device.
2) Keep these two buttons pressed and use your stylus to press the reset button.
3) Keep everything pressed for about 5seconds then release the Reset button (with your stylus)
4) Release the Comm Manager and Voice Command buttons
5) A message should appear on the screen
6) Press the green phone button to validate the hard reset ...
Thank you, You guys solved my problem.
thanks again
Hello
Does anyone know how to do a Hard Reset on HD?
Regards
Hold both volume buttons and press and release the power button I think!
Hi, most HTC using this step
press and hold : 1 Call-key , hangup-key, and power-key
2 then then click yes need hold power
3 black screen, press power again will as for hard reset
hope that help
Oh and phone has to be off to.
page 278 in the manual
To perform a hard reset
1. With the device turned off, press and hold the VOLUME UP and VOLUME DOWN buttons, then briefly press the POWER button.
2. Continue pressing the VOLUME UP and VOLUME DOWN buttons until you see this message on the screen:
This operation will delete all your personal data, and reset all settings to the manufacturer default settings. Press VolUp to restore manufacturer defaults, or press other keys to cancel.
3. Release the VOLUME UP and VOLUME DOWN buttons.
4. Press the VOLUME UP button to perform the hard reset, or press any other button to cancel the reset.
Ladies and Gents,
Now that I have been playing with mine for the best part of 24hrs :-D I can confirm that the best way to do a hard reset is to not bother with the holding down of the volume keys and quickly hitting the on / off button - this didn't work for me ONCE!!
It is however possible if you select the CLEAR STORAGE option in the settings menu and key in 1234.
Works perfectly.
Good luck, and enjoy your HD
MobileMerlin
Hi,
I need to wipe my HD - it's going back and I'm getting a replacement (original has dead pixels).
Does the Clear Storage actually clear everything like a hard reset?
Also - does this wipe the SD card?
hard reset will not wipe your storage card. It will however wipe your device storage.
Clear storage will do exactly the same thing as a hard reset. It sends your device back to the time it came out of the box for the 1st time.
It leaves your mem card alone.
Cool - thanks for the prompt replies!
I suppose another solution would be to remove the SD card before wiping!
Hope the replacement is ok -then I can start putting my apps back!
Here a Youtube Video how it works:
http://de.youtube.com/watch?v=Eqg8XFJyHBY
Hard Reset:
Power on the Device
Remove Accu Cover
Hold Volume Up and Volume Down Buttons
press the Reset Button on the Back of teh Device for 3-5 Seconds (where the Micro-Sd Card is)
following the text on the screen
kerni said:
Here a Youtube Video how it works:
http://de.youtube.com/watch?v=Eqg8XFJyHBY
Hard Reset:
Power on the Device
Remove Accu Cover
Hold Volume Up and Volume Down Buttons
press the Reset Button on the Back of teh Device for 3-5 Seconds (where the Micro-Sd Card is)
following the text on the screen
Click to expand...
Click to collapse
Thanks Mate I have just tried it and It works perfectly. Although you have to be slight quick because the actual volume button are on the cover. You know what I mean.
EDIT: You can just turn off the phone press the volup and voldown button and press the power button it will go for hard reset. No need for opening back cover.
sumitescp said:
thanks mate i have just tried it and it works perfectly. Although you have to be slight quick because the actual volume button are on the cover. You know what i mean.
Edit: You can just turn off the phone press the volup and voldown button and press the power button it will go for hard reset. No need for opening back cover.
Click to expand...
Click to collapse
solution work
good
thx
Thanks!!!!very useful......
Thanks kerni
It's work.
thanks for hard reset
so, if clear storage is the same as hard reset, why do people still bother with the hard way of hard reset?
dan138zig said:
so, if clear storage is the same as hard reset, why do people still bother with the hard way of hard reset?
Click to expand...
Click to collapse
Clear Storage requies Windows Mobile to be running.
Hard reset provides the same function at a hardware level - i.e. you don't need Windows running...
Please Help ?? Someone ?? I did the Volume up+volume down+power button and it displays the colors and it just stays there,it says only htc blackstone led etc... message but doesn`t go any further to the deleting thing. Anyone can help me ?? What`s wrong with it ? Thanks a lot !!
djspoti said:
Please Help ?? Someone ?? I did the Volume up+volume down+power button and it displays the colors and it just stays there,it says only htc blackstone led etc... message but doesn`t go any further to the deleting thing. Anyone can help me ?? What`s wrong with it ? Thanks a lot !!
Click to expand...
Click to collapse
If your phone does not reboot even after a hard reset I would try flashing a different rom. Would start by restoring stock rom first then using Dummies Guide top flash custom rom
For some reason I can no longer get cab files to work - When I touch a .cab nothing happens (but if I touch a .exe the program starts OK, .doc opens OK etc).
So I thought I would hard reset but I can't get that to work either.
With phone off, press and hold up/down volume and then briefly press power button - I get HTC splash then (briefly) a black screen then windows starts then the volume pop-up opens and the phone beeps until I release the volume button.
If I press and hold up/down volume and then press and hold power button it goes into bootloader.
Does anyone know if Clear Storage restores registry settings as well as clearing phone storage (ie is it the same thing as a hard reset)
Or why .cab files no longer install software?
are you running stock ROM?
ericjennings said:
For some reason I can no longer get cab files to work - When I touch a .cab nothing happens (but if I touch a .exe the program starts OK, .doc opens OK etc).
So I thought I would hard reset but I can't get that to work either.
With phone off, press and hold up/down volume and then briefly press power button - I get HTC splash then (briefly) a black screen then windows starts then the volume pop-up opens and the phone beeps until I release the volume button.
If I press and hold up/down volume and then press and hold power button it goes into bootloader.
Does anyone know if Clear Storage restores registry settings as well as clearing phone storage (ie is it the same thing as a hard reset)
Or why .cab files no longer install software?
Click to expand...
Click to collapse
Yes - clear storage is just like hard reset.
goldt said:
are you running stock ROM?
Click to expand...
Click to collapse
yes, 1.66.405.2 (76641) WWE
Thanks for the help - found a way to hard reset with the phone on (in the wiki - I know, should have checked that first!!) and that worked.