Hi, I am having problems getting my X2 into boot mode in order to update the firmware to MR1- I've followed the instructions on SE Update Service (press and hold volume down button and power button until white screen appears)
All that happens is the vibration feedback to indicate power on, then the phone loads up as normal with the logo in a black background???? anyone else come across this?
help me X2
hi all fri
i had one sony x2 ,but have some problem !can you tell me how to enter undate mode !and X2 chinese rom! thanks
do you press and HOLD both buttons till the desired screen appears? Should not release Power button before the screen emerges..
Yes I did, It's just loads up as normal, I have the xperia x1 so I'm not new to this devices, anyone experienced this before?
Are you sure that you are doing it exactly like this:
1. Remove and re-insert battery.
2. Press AND HOLD the volume down button.
3. Press AND HOLD the power button at the same time.
Hold the two buttons (and no other buttons) until logo on white background appears.
The order is important, first the volume down button - keep pressed, then the power button - keep both pressed.
The most important thing that many people miss is...
You must NOT have the USB cable plugged in when you do this. Only plug the phone in after the white screen appears.
This is not my first xperia as I still have the x1, so I do know what I'm doing, the phone boots up as normal (sony ericsson logo with the 'black' background) unlike the x1 with the tricolor screen. Is there anyother way to enter the bootloader or reset the whole ROM? someone please help as I can't update my phone and spony ericssonwon't do anything about it because it hasn't been officially released in the UK :S
i have the same issue tryed every thing (volume down + power =nothing. volume down + power +soft reset button= nothing. look in the registry found nothing relevant to bootloader )i think bootloder got messed up or something. is there a folder or something containing the bootloder
adidas35th said:
Hi, I am having problems getting my X2 into boot mode in order to update the firmware to MR1- I've followed the instructions on SE Update Service (press and hold volume down button and power button until white screen appears)
All that happens is the vibration feedback to indicate power on, then the phone loads up as normal with the logo in a black background???? anyone else come across this?
Click to expand...
Click to collapse
Exactly the same problem
same here, very frustrated, need my phone back to factory settings! any1 help please???
It's important that you normally turn off the phone before getting out the battery or it will reboot normally when the battery is inserted.
X2 DEAD
I also have the same problem as my device does not turn on nor k is functioning BOOTLOADER MODE.
only once beats vibrating k after the computer sees an unknown device.
I left my phone in few mobile services, nobody did any good to it - same problem still left. Last chance will be SE service.
do u find solution to repair your x2
do u find solution to repair your x2
No.. my phone few weeks ago went dead (after installing custom cab's)..now its only peace of trash
Giz1984 said:
same here, very frustrated, need my phone back to factory settings! any1 help please???
Click to expand...
Click to collapse
To get back into factory-defaults, then use the Phone reset found under Settings->System. That will re-install everything.
Related
It is stuck at the white HTC splash screen when you first start up the phone....after that its just a black screen, ive tried both hard and soft resets. I heard theres a way to flash it from the bootloader but i dont know how....So guys help me out....I really wanna fix this thing
CraigC94 said:
It is stuck at the white HTC splash screen when you first start up the phone....after that its just a black screen, ive tried both hard and soft resets. I heard theres a way to flash it from the bootloader but i dont know how....So guys help me out....I really wanna fix this thing
Click to expand...
Click to collapse
Hi there;
To get into the bootloader mode, switch phone off and then hold the red/green answer buttons, and then power up the phone, hold this down until you get the 3 different colours on the screen.
*By the way, if anyone more experienced wishes to correct me, feel free*
*Damn Doublepost*
To enter the bootloader:
Hold down the camera button and reset device with the stylus. Keep holding the camera button until you see 'tricolor' bootloader screen.
An alternative way to enter bootloader:
Switch the device off by long pressing O/I (power) button. hold down the camera button while pressing the O/I button about 1 second. Keep holding the camera button until you see 'tricolor' bootloader screen.
Alternative(universal?) bootloader(3)
As almost all htc smartphones with onboard camera, when you push and hold the camera(photo) button, and plug in usb adapter. Even a "stupid" usb power adapter will work.
To hard reset:
Hold down send/reject buttons (green/red at the front) and reset with the stylus; release the stylus but keep holding the buttons till you get 'this will erase all your personal data' message, then press 'action' (big front button) to hard reset.
Good LUck
Same here
I have a HTC Touch 6900 I tried to upgrade the rom and now the HTC won't boot up. I tried to hard reset, and tried to get to the bootloader but nothing can anyone help me, Please
i had this same problem five minutes ago i removed the battery for a few minutes and replaced it and it turned on
Rdit:
--
ok the problem is solved... i´ve found the right unbrick ROM now it works
--
ok... now i have the same Problem. I wanted to flash from Onyx WM6.5 (5.0) to the original Vodafone Rom WM6 which i dumped.
After the flash finished, the device rebooted, the Vodafone screen was on the display and then it was black...
Hardreset = no change
Flashing back to Onyx = no change
remove battery = no change
bootloader is reachable and flashing works but the problem with booting is still there
i own a hd2 EU version (end call and answer call are not colored with green and red , they're all white ) tried to get android on my phone but the procesed stopet coze i got bluescreen on my pc now i cant get my hd2 into colored screen to start again from the 1st stem (mgdlr)
i tried
Step 2. Hold the Volume Down Button and press the End (red) key once.
but my phone turn on and stuck at htc logo ?
what else to try
lummujaj said:
i own a hd2 EU version (end call and answer call are not colored with green and red , they're all white ) tried to get android on my phone but the procesed stopet coze i got bluescreen on my pc now i cant get my hd2 into colored screen to start again from the 1st stem (mgdlr)
i tried
Step 2. Hold the Volume Down Button and press the End (red) key once.
but my phone turn on and stuck at htc logo ?
what else to try
Click to expand...
Click to collapse
I don't think there should be a 'HTC' screen when you're booting into bootloader? I'm not sure, but just try holding down both the power button and the volume down button, as I think people have been able to restart the process after their phone has run out of battery or something similar. Hopefully everything should be OK once you've managed to access the bootloader.
Oh, and I don't mean to be rude, but use a better PC next time
phone wont go into bootloader , phone just turn on NORMALLY , but while there is no system at all on his memory he just stuck at HTC (green) on white background !
im suspecting that my VOLUME DOWN button is broken ?
Have you tried the back key?
power (end call) + back key ?
If you have magldr installed it should bring you to magldr menu which would point towards faulty vol down button ....
lummujaj said:
i own a hd2 EU version (end call and answer call are not colored with green and red , they're all white ) tried to get android on my phone but the procesed stopet coze i got bluescreen on my pc now i cant get my hd2 into colored screen to start again from the 1st stem (mgdlr)
i tried
Step 2. Hold the Volume Down Button and press the End (red) key once.
but my phone turn on and stuck at htc logo ?
what else to try
Click to expand...
Click to collapse
If I remembered correctly, some of the people mentioned that HD2 is quite difficult to brick. I think that you could still try to work with your phone unless you still suspect that you have a faulty volume down button. I noticed in your statement in Step 2 coloured red that you press the end key once. I haven't flash in a while but I think you should hold the end key with the volume down button until you get into bootloader mode (screen with tri colour). Don't just press the key once. I hope this helps.
lummujaj said:
... tried to get android on my phone but the procesed stopet coze i got bluescreen on my pc ...
Click to expand...
Click to collapse
I am sorry, but I think you may have bricked your device.
Sure thing, the european HD2 is quite difficult to brick. But your PC had frozen while you were in the middle of flashing. (right?)
It is like pulling out the USB cable while flashing. You can try flashing from sdcard. Are you sure you are not able to go into bootloader?
To get to bootloader press and hold vol down button and then press the power (end call) button. I do a lot of flashing lol
lol...i just noticed the threadstarter's point of saying he pressed the power key "once". So i thought that was a mistake. Could be surely from the faulty volume button. Don't see any reply yet from him.
This phone just broke after 3 months of use. Since I brought it off of amazon as unlocked, I do not have warranty on phone. The phone was not dropped nor water-damaged. It was sitting on the table and suddenly experiencing problems with lag. I proceed to turn off and try to restart phone.
The phone does not boot when I press the power button.
What I've tried:
case 1: I removed SD card, removed battery and removed USB cord. Press power button for 10 seconds. Put back battery and press power button
result 1: LED light on. The phone vibrates 5 times. Remains in black screen
case 2: I called my phone number from another phone
result 2: Straight to voice mail. This indicates the software did not even boot up. Hardware display is not the issue here. Most likely a Software issue.
case 3: I hold volume down key and power key to attempt hard-reset
result 3: LED light on. The phone vibrates 5 times. Remains in black screen
Since I routinely backed up my phone data. Last time I've checked (~4 days ago), the SD card was not nearly full. It was approximately 25% used space.
PLEASE HELP!! YOUR HELP WILL BE APPRECIATED!
Are you able to access any of the service menu's such as bootloader or fastboot mode?
If your not aware what those are, there are many references in this forum for you to find information.
dustbyter said:
Are you able to access any of the service menu's such as bootloader or fastboot mode?
If your not aware what those are, there are many references in this forum for you to find information.
Click to expand...
Click to collapse
No. The screen was all black. But fortunately, the phone was able to turn on after some trial and error.
You remove the battery and USB cord. Then while pressing (and holding) the home button key, you put back in the battery and press the power button. To hard reset, you must press volume down key, home key, and power key at the same time.
Glad that you got your phone working!
Mine continues to remain dead
I had this problem a few months back at first i too thought the phone was dead - but it did make boot vibration noise - but the screen would always remain "black" but after some time and after going into a very dark room i was able to see that the screen was not black, but that the backlight went out on it -- after having my screen replaced the phone now works fine - think i was using cm7 at the time.. hope this might help
Thanks for this tip! I'll check on the phone I had as well. I got to get it back from my buddy.
I just bought and installed this unit in my 2010 Prius from a seller on Ali Express
I want to install a custom ROM on it but first I want to make sure I can successfully boot into recovery in case something goes horribly wrong. The seller REALLY doesn't want to share that information with me, so I was wondering if someone here might know how this is done.
If you have a reset button...
Press it (with toothpick) and hold it pressed until you see blinking the lights of buttons...then release and press it again until you see the lollipop logo. Release it and you will be on recovery menu.
You can move on different options from recovery by pressing quickly the reset button and choose an option by holding pressed the reset
if I did help you, please hit "thanks" button
ikerg said:
If you have a reset button...
Press it (with toothpick) and hold it pressed until you see blinking the lights of buttons...then release and press it again until you see the lollipop logo. Release it and you will be on recovery menu.
You can move on different options from recovery by pressing quickly the reset button and choose an option by holding pressed the reset
if I did help you, please hit "thanks" button
Click to expand...
Click to collapse
So I tried that, but on my unit when you press the reset button all the light go out and stay out until the button is released. The only time I can get the lights around the buttons to flash three times is when I release the reset button and hold down the power button. But when I release the power button and hold it down again after the flashes it just repeats the three flashes again like the first time. If I release the power button at any time it just loads up like normal. If I hold it down again when the lollipop logo comes on it just goes blank and repeats the three flashes again. If I press the reset button it just resets the unit again, if I hold it down it does nothing until I let go, then it resets the unit again like normal.
The three flashes seem like they mean something but I can't figure out how to get to the next step of actually starting the recovery. I want to flash a custom rom but I am afraid to do it without the safety net of being able to get into recovery if I need to, you know?
any update
I also want to buy this unit, but I'm just not sure:
Does it connect to all the functions of the Prius 3? Camera? Microphone? Steeringwheel buttons? Other?
Or do you need extra modules? Which?
Are you enabled to edit the basic car functions from it at least?
Found the thread on google, waiting for someone custom rom it, its good, everything works excepts its buggy, sometimes camera dont work etc that is why i also want a simlle custom rom on it
Edit: solved here : https://forum.xda-developers.com/an...pment/mtcd-intel-sofia-units-wifi-3g-t3533154
Could you explain me how? I have same screen but I don't even get those 3 lights pushing both reset + power at same time. Thanks
Hey guys, so I have this media and my camera doesnt work, I just bought this car and when i put to reverse just yellow triangle appears, i found on google that they might be a solution in my factory settings, but I dont know the password, so do any of you know it, i would apreciate any kind of help, thanks.
I have update my Nokia 6 to Android 9.0 but its stuck on the Nokia logo. Is there a way to recover from bootloop without hard reset? I have no experience in flashing and do not understand most of the terminologies used, so please treat me as a beginner.
I have the same problem.. have you found a way?
viennazar said:
I have the same problem.. have you found a way?
Click to expand...
Click to collapse
No unfortunately. I have some really important data and do not want to factory reset the phone.
Gorilla Dunk said:
I have update my Nokia 6 to Android 9.0 but its stuck on the Nokia logo. Is there a way to recover from bootloop without hard reset? I have no experience in flashing and do not understand most of the terminologies used, so please treat me as a beginner.
Click to expand...
Click to collapse
NO! Android 9 its other api (28), need full reset.
ACARAGIA said:
NO! Android 9 its other api (28), need full reset.
Click to expand...
Click to collapse
I can't even get the full reset done... does anyone know how to do this?
viennazar said:
I can't even get the full reset done... does anyone know how to do this?
Click to expand...
Click to collapse
If you want to reach recovery mode and reset your phone follow these steps:
1. Make sure the phone is powered off. If it isn't, press and hold the volume up button and the power button until the screen closes. then release your hold.
2. Connect the phone to the charger and wait till you see the charging screen (a big battery icon with a percentage).
3. Press and hold the volume up button and the power button for exactly 10 seconds and release. After 2-5 seconds you should see a new screen with an android saying "no command". If you don't see the new screen you either released too early or too late. repeat steps 1-3.
4. Hold the power button and press the volume button once. and release. This should take you to recovery mode.
5. Scroll using the volume buttons and select factory reset using the power button and confirm.
This would reset yout phone.
Gorilla Dunk said:
If you want to reach recovery mode and reset your phone follow these steps:
1. Make sure the phone is powered off. If it isn't, press and hold the volume up button and the power button until the screen closes. then release your hold.
2. Connect the phone to the charger and wait till you see the charging screen (a big battery icon with a percentage).
3. Press and hold the volume up button and the power button for exactly 10 seconds and release. After 2-5 seconds you should see a new screen with an android saying "no command". If you don't see the new screen you either released too early or too late. repeat steps 1-3.
4. Hold the power button and press the volume button once. and release. This should take you to recovery mode.
5. Scroll using the volume buttons and select factory reset using the power button and confirm.
This would reset yout phone.
Click to expand...
Click to collapse
Many Thanks .. it worked !!