Database Users

P8 Lite (ALE-L21) bricked

Hi,
I have an unlocked and rooted P8 Lite (ALE-L21) with TWRP 2.8.7.0 (I think that's the version) and I had a google play problem so after trying all solutions that I found it didn't work so i used the advanced wipe function that offers TWRP but accidently i wiped system part so I don't have any OS in my phone and now I have a bootloop. I downloaded a firmware "ALE-L21 V100R001C432B052 Europe channel dual sim" but I didn't know how to flash it because i'm new at huawei phones i was an expert in samsung devices however i don't know how to flash the UPDATE.APP file that I found in the dload folder with TWRP can you help me ? (I can't boot into the bootloader mode i can only boot recovery mode (TWRP) )
Thanks for reading that post ^^

Hello,
You can unbrick your device using this method Unbrick Huawei P8 Lite Ale-L21
Simply boot into bootloader(Plug phone into PC and hold volume down+power button, when phone vibrating release the buttons) when is in bootloader run bat(FLASH-ALL.bat) file in archive
This will install Firmware version C432B052 after that you can update via OTA
Regards

Thanks for replying to this post, I searched a little bit more and I found a software called "HuaweiUpdateExtractor" I extracted 4 files from my UPDATE.APP with that software : system, cust, recovery, boot and then flashed them with fastboot but I can't acces to my bootloader with the 2 volume buttons + power it give me an error so i used TWRP I went to Reboot then Bootloader ^^

[SOLVED]bootloop after installing supersu over the latest B584

I updated to B584 and everything worked fine.
Then I installed the latest supersu via twrp and got a bootloop.
I tried to fix it with
Code:
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash cust cust.img
fastboot flash system system.img
of the extracted firmware which is uploaded in the megathread here.
The bootloop continues unfortunately.
Do I need the firmware of B584 and if yes where do I get it?
If it is not about the firmware, is there any other way to fix my phone?
Edit: The latest firmware did the magic. I extracted the boot, recovery, cust and system images now it works.
If someone runs into the same problem download the Huawei extractor from the Megathread and the latest firmware B584 dual sim
B585 single sim

i've same problem i did try using fastboot but its showing failed :command not allowed
can i use this method to fix my p8 lite?
---------- Post added at 06:38 AM ---------- Previous post was at 06:37 AM ----------
i've same problem i did try using fastboot but its showing failed :command not allowed
can i use this method to fix my p8 lite?

ojekota said:
i've same problem i did try using fastboot but its showing failed :command not allowed
can i use this method to fix my p8 lite?
---------- Post added at 06:38 AM ---------- Previous post was at 06:37 AM ----------
i've same problem i did try using fastboot but its showing failed :command not allowed
can i use this method to fix my p8 lite?
Click to expand...
Click to collapse
You need to unlock the bootloader first

but how to unlock my phone was bricked

ojekota said:
but how to unlock my phone was bricked
Click to expand...
Click to collapse
Can you go into fastboot mode? (vol down + power)

please help me i hase emui 4..1
and i install twrp 4.1 and when i install nougat i install
supersu_v2.79_sr2 then
update_2 but when istall update it stop on writinh ratio i shut dun the phone but no login to twrp or to stock recovery
help me plaese
i flashed twrp from SRKTool the phone bootloop and i canot poweroff please help me
i was on 4.1 and i was unlock bootloader and twrp and i was insall nougat l29c185b560 wich have 3 files
supersu_v2.79_sr2 ----update_2------update_data_full_hw_meafnaf
when i flash update.zip in twrp it stop install on ratio i sutdown the phone and now the phone
is bootloop and not shutdown i try flash many recovery same problem my phone
is l29c185b--
https://forum.xda-developers.com/mat...icial-t3556789
I canot power off my phone but when I waited until the battery was discharged but the phone restart alone
I use method two by flash .img cust complet recovery complet boot complet but when flash system.img faild the rom exracted is l29c185b320
I try flash boot cust boot and system from nougat it complet but the problem same I canot dload I canot boot to recovery for wipe and the phone stay restart
please any help when I was flash nought it not complet it stop on writing ratio so I power off phone then the problem haben

I want my normal handy back :(

So bricked my handy, after that I flasht the wrong stock Software. (Huawei P9 Lite L31 Single Sim) I was on L21xxxx, but I wanted the old OS back. After trying out several methods to flash back the right os, something happend. My Handy is now on VNS-C900B161 and his modelnumber is hi6250 instead Huawei P9 Lite L21/L31. Can please somebody help me? I just want my os back on VNS-L31C432Bxx and update without flashing to nougat.

germain145 said:
So bricked my handy, after that I flasht the wrong stock Software. (Huawei P9 Lite L31 Single Sim) I was on L21xxxx, but I wanted the old OS back. After trying out several methods to flash back the right os, something happend. My Handy is now on VNS-C900B161 and his modelnumber is hi6250 instead Huawei P9 Lite L21/L31. Can please somebody help me? I just want my os back on VNS-L31C432Bxx and update without flashing to nougat.
Click to expand...
Click to collapse
Flash the C432 oeminfo then reflash B160...
And never flash L21 firmware on L31... If you have L31 flash L31 firmware!.

Thanks for responding! I know it sounds stupid but can you write step by step what I should do now? Im really new to the whole flash, Recovery thing. 70% what I have done was luck. Im sorry for my English Im German.

germain145 said:
Thanks for responding! I know it sounds stupid but can you write step by step what I should do now? Im really new to the whole flash, Recovery thing. 70% what I have done was luck. Im sorry for my English Im German.
Click to expand...
Click to collapse
1.unlock your bootloader
2.install twrp
3.download c432 oeminfo and b160 update.zip
4.copy c433 oeminfo to your sd card/phone and extract update.app from update.zip and put it in dload folder in sd card(you make dload folder)
5.boot to recovery and flash oem info
6.turn off your phone
7.hold power,volume down+volume up buttons till update starts to install and be patient

ok, I wanted to flash the oeminfo and they were 2 options: install into boot or install into recovery. I couldnt install into boot so I installed into recovery. The installation was succesfull. After that I tried to install the update.app but when I press down the three buttons, it starts the Huawei Erecovery. So I tried it with the secret menu to do a local update but after that it starts the Erecovery again.

When I try to flash it into boot (what i think what I suppost to do) it says that the file is too large to flash it into boot partition.

germain145 said:
When I try to flash it into boot (what i think what I suppost to do) it says that the file is too large to flash it into boot partition.
Click to expand...
Click to collapse
it should work both ways, are you sure you have the correct oeminfo? just try to flash oeminfo in meticulus twrp and then use the 3 buttons to flash update.app in sdcard/dload

germain145 said:
ok, I wanted to flash the oeminfo and they were 2 options: install into boot or install into recovery. I couldnt install into boot so I installed into recovery. The installation was succesfull. After that I tried to install the update.app but when I press down the three buttons, it starts the Huawei Erecovery. So I tried it with the secret menu to do a local update but after that it starts the Erecovery again.
Click to expand...
Click to collapse
Are you sure you are pressing all three buttons? Make sure all buttons are working,because you shouldnt get erecovery by doing that

force shutdown phone , if not work take backpanel out no screws only little gleu and 5-6 normal screws inside, plug off battery and then put inside > hold volume + and - together and press power volume button untill you see the huawei logo.

Ok, I checked my volume buttons they are working. But I press all three buttons and still it starts twrp.

[SOLVED] Huawei p9 lite stuck at " your device is booting now", can't enter fastboot

[SOLVED] Huawei p9 lite stuck at " your device is booting now", can't enter fastboot
I tried to install twpr recovery on my phone, but now I can't enter fastboot or something else
My phone stays the same with "Your device is booting now..."

Hey dude try post moore detailed info
like your phone model, last firmware you have,
all stuff you used to flash....
Without this kind of informations
nobody can help you..
Best regards.

Dadditz said:
Hey dude try post moore detailed info
like your phone model, last firmware you have,
all stuff you used to flash....
Without this kind of informations
nobody can help you..
Best regards.
Click to expand...
Click to collapse
Yeah sorry, it's a P9 Lite, vns-l31 (if I'm not wrong), The last firmware was EMUI 5.0.1(?)
I tried to flash recovery_twrp on it via ADB (MAF32.exe). After this I was stuck in bootload but still could acces the fastboot.
Then I tried to relock and unclock my bootloader again and then I was stuck on this screen.
Every key combination I try will give the same result. Also tried to put UPDATE.APP on my sdcard but no success...

When I let my battery die, I get the tree options menu. When I go in Huawei eRecovery, and want to recever it fails to get the package

When I let my battery die, I get the 3 option menu, but it fails to get the package info
Then when it boots it keeps stuck at the Huawei logo

Now I can get in fastboot

After this I flashed the recovery.img via fastboot from this link and rebooted & it worked!!

SSS95 said:
After this I flashed the recovery.img via fastboot from this link and rebooted & it worked!!
Click to expand...
Click to collapse
Good..:good:

Help with rooting Huawei p9 lite vns-l31 C185

Hi everyone
I hope someone can help me with this:
I'm trying to root my huawei p9 lite vns-l31 C185 B397
1- FRP and bootloader unlocked
2- I tried flashing and booting into TWRP recovery in fastboot mode using (twrp-3.5.2_9-0-a5y17lte.img) latest version but the phone always gets back to (erecovery)
and i wasn't able to validate the link for the specific device model
download twrp-3.1.1-0-venus.img
3- I tried rooting using Magisk by patching and flashing the (boot.img) file from (UPDATE.APP) file from this ROM (Huawei_P9_Lite_VNS-L31_C636B170_Asia_6.0) which is in different region than my original firmware
eventually I got stuck at ("Your device is booting now")
does anyone have an idea how to fix the problem?

aramous said:
Hi everyone
I hope someone can help me with this:
I'm trying to root my huawei p9 lite vns-l31 C185 B397
1- FRP and bootloader unlocked
2- I tried flashing and booting into TWRP recovery in fastboot mode using (twrp-3.5.2_9-0-a5y17lte.img) latest version but the phone always gets back to (erecovery)
and i wasn't able to validate the link for the specific device model
download twrp-3.1.1-0-venus.img
3- I tried rooting using Magisk by patching and flashing the (boot.img) file from (UPDATE.APP) file from this ROM (Huawei_P9_Lite_VNS-L31_C636B170_Asia_6.0) which is in different region than my original firmware
eventually I got stuck at ("Your device is booting now")
does anyone have an idea how to fix the problem?
Click to expand...
Click to collapse
- Install TWRP 3.1.0.2
Link
- Download Magisk.zip file
https://androidfilehost.com/?fid=673791459329054316
- Download and install Magisk manager 5.4.0
- Enter TWRP and flash Magísk.zip
- Reboot
Or, you can root your phone by installing SuperSu 2.8.2.zip in TWRP.

Awesome ! all done ! thanks a lot for your help !