I updated to B584 and everything worked fine.
Then I installed the latest supersu via twrp and got a bootloop.
I tried to fix it with
Code:
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash cust cust.img
fastboot flash system system.img
of the extracted firmware which is uploaded in the megathread here.
The bootloop continues unfortunately.
Do I need the firmware of B584 and if yes where do I get it?
If it is not about the firmware, is there any other way to fix my phone?
Edit: The latest firmware did the magic. I extracted the boot, recovery, cust and system images now it works.
If someone runs into the same problem download the Huawei extractor from the Megathread and the latest firmware B584 dual sim
B585 single sim
i've same problem i did try using fastboot but its showing failed :command not allowed
can i use this method to fix my p8 lite?
---------- Post added at 06:38 AM ---------- Previous post was at 06:37 AM ----------
i've same problem i did try using fastboot but its showing failed :command not allowed
can i use this method to fix my p8 lite?
ojekota said:
i've same problem i did try using fastboot but its showing failed :command not allowed
can i use this method to fix my p8 lite?
---------- Post added at 06:38 AM ---------- Previous post was at 06:37 AM ----------
i've same problem i did try using fastboot but its showing failed :command not allowed
can i use this method to fix my p8 lite?
Click to expand...
Click to collapse
You need to unlock the bootloader first
but how to unlock my phone was bricked
ojekota said:
but how to unlock my phone was bricked
Click to expand...
Click to collapse
Can you go into fastboot mode? (vol down + power)
please help me i hase emui 4..1
and i install twrp 4.1 and when i install nougat i install
supersu_v2.79_sr2 then
update_2 but when istall update it stop on writinh ratio i shut dun the phone but no login to twrp or to stock recovery
help me plaese
i flashed twrp from SRKTool the phone bootloop and i canot poweroff please help me
i was on 4.1 and i was unlock bootloader and twrp and i was insall nougat l29c185b560 wich have 3 files
supersu_v2.79_sr2 ----update_2------update_data_full_hw_meafnaf
when i flash update.zip in twrp it stop install on ratio i sutdown the phone and now the phone
is bootloop and not shutdown i try flash many recovery same problem my phone
is l29c185b--
https://forum.xda-developers.com/mat...icial-t3556789
I canot power off my phone but when I waited until the battery was discharged but the phone restart alone
I use method two by flash .img cust complet recovery complet boot complet but when flash system.img faild the rom exracted is l29c185b320
I try flash boot cust boot and system from nougat it complet but the problem same I canot dload I canot boot to recovery for wipe and the phone stay restart
please any help when I was flash nought it not complet it stop on writing ratio so I power off phone then the problem haben
Related
I have ALE-L21 was running on C185B160 try to upgrade it to OFFICIAL MM6 6.0 but ended up with error installation failed i unpack the UPDATE.APP and manually flash RECOVRY.IMG.......CUST.IMG......BOOT.IMG......SYSTEM.IMG..... fastboot reboot...i can boot into recovery... but cant boot into system....stuck on huawei Logo.... My bootloader is unlocked... i can flash TWRP...and also can boot to twrp but how i can boot into system please help me... Please!
pixel989 said:
I have ALE-L21 was running on C185B160 try to upgrade it to OFFICIAL MM6 6.0 but ended up with error installation failed i unpack the UPDATE.APP and manually flash RECOVRY.IMG.......CUST.IMG......BOOT.IMG......SYSTEM.IMG..... fastboot reboot...i can boot into recovery... but cant boot into system....stuck on huawei Logo.... My bootloader is unlocked... i can flash TWRP...and also can boot to twrp but how i can boot into system please help me... Please!
Click to expand...
Click to collapse
try this http://huaweip8lite.blogspot.lt/2016/04/mod-p8-lite-multi-tool-by-sokoban.html?m=1
?!
staska_lt said:
try this http://huaweip8lite.blogspot.lt/2016/04/mod-p8-lite-multi-tool-by-sokoban.html?m=1
Click to expand...
Click to collapse
the job this Tool doing!! i have already did that but?? the problem still there
Any way. Thanx!
Hello GUYS.. So I was on the latest nougat update and I wanted to try CM13 on my P9 Lite VNS-L31 but someone told me that I need to downgrade to 6.0 before I install CM13 So I downloaded oeminfo and 6.0 rom from update finder.. and first I wiped system, data, cache and dalvik cache..okay so now I have no os installed.. Then I tried to install oeminfo with TWRP.. But it can't mount product/vendor/version (invalid argument) And I was like wtf does this mean? so I flashed stock rom image with fastboot again.. it said it's installed but twrp says no os is installed.. ugh I just tried everything to fix that..I tried to extract vendor.img and product.img and flashed them from fastboot.. But it said command not allowed and still twrp gives me the same errors when i try to wipe data or install system.. I asked people on another site and they told me I should install stock boot and recovery images from twrp and install system with 3 buttons method.. So I did but it said failed.. And when I wanted to flash twrp again the bootloader was locked wtf? so then I tried to unlock it again it asked me if i really wanna unlock it and I choose yes..the phone rebooted and I got this
Error Mode
Attention
Please update system again
(Android Logo)
Error!
Func NO: 11 (recovery image)
Error NO: 2 (load failed)
now I can't boot into recovery or fastboot it just stays in this screen
I tried to install system with the 3 button method but it just won't boot to anything.. I also tried to connect the cable and boot to fastboot..But it. just shows the huawei logo and then goes back to error mode.. please tell me what I should I do now?
hi, did you solve this issue?
You should've just downloaded the rollback package and stock mm rom. Flash the roll back package and then the mm rom in eRecovery. Btw if you are going for meticulus Cm13 rom then ot has been removed from his website and in the beanstalk rom of meticulus when you call someone or someone calls you then the UI restarts. Thats a major bug
Hello i just bought yesterday the redmi pro hellio 25x edition and i try to root it with iroot then suddenly it poped up a message that i coudnt stop to send some feedback to xiaomi i turned off the phone and i try to boot it again but it is stuck on mi logo i try to boot in recovery to wipe cache and etc but i cant find any recovery mode i can boot only in fastboot and somethinh else tha it shows a phone and a cable to connect please help
Is your bootloader unlocked? If it isn't, and your really in a soft bootloop, which means you're on the mi logo that says powered by android below it, there's a chance you can unlock your bootloader. http://en.miui.com/unlock/
After you unlock, flash TWRP (instructions here: https://forum.xda-developers.com/redmi-pro/how-to/twrp-redmi-pro-t3516227, but use this version: https://forum.xda-developers.com/redmi-pro/development/twrp-3-1-1-redmi-pro-t3610075)
Then install the zip from xiaomi.eu from twrp: https://www.androidfilehost.com/?fid=601307472480698617
After that, if you want to root, download the supersu zip: https://s3-us-west-2.amazonaws.com/supersu/download/zip/SuperSU-v2.82-201705271822.zip
And xposed for MIUI is here: https://forum.xda-developers.com/xposed/unofficial-xposed-miui-t3367634
Remember, the best and safest way to root is always with TWRP and SuperSu. Most other "one-click" methods are scams or install bloatware.
---------- Post added at 04:42 AM ---------- Previous post was at 04:36 AM ----------
https://forum.xda-developers.com/android/help/iroot-previously-vroot-safe-t2984822
good news
Thank you very much
I just flash a chinese rom to open with sp flash tool then i unlock the bootloader flash twrp and then globe rom its perfect now my phone and rooted
hello guys , my huawei p9 lite is bricked , it was on android 7 nougat , and afyer days i downgrade it to android 6 marshmallow , after the operation i saw that google account not working , so i tried to reinstall the firmware , i start first by the rollback , and then after instalation , the phobe rebooted and stucking on logo of huawei , i tried to turn it off it won't turbing off , when i press the power button in turnin off and turnin on on the same time , i can only enter to fastboot&rescue mode , please help
Hi, did you solve?
Extractor the update.app with HuaweiUpdateExtractor and flash boot file in fast boot
fastboot flash boot boot.img
saeidf2 said:
Extractor the update.app with HuaweiUpdateExtractor and flash boot file in fast boot
fastboot flash boot boot.img
Click to expand...
Click to collapse
I'm on Mac can't use huawei update extractor...
---------- Post added at 02:37 PM ---------- Previous post was at 02:35 PM ----------
saeidf2 said:
Extractor the update.app with HuaweiUpdateExtractor and flash boot file in fast boot
fastboot flash boot boot.img
Click to expand...
Click to collapse
Also is there a command to force the 3 button methods to start from ADB/FASTBOOT?
Hi everyone
I hope someone can help me with this:
I'm trying to root my huawei p9 lite vns-l31 C185 B397
1- FRP and bootloader unlocked
2- I tried flashing and booting into TWRP recovery in fastboot mode using (twrp-3.5.2_9-0-a5y17lte.img) latest version but the phone always gets back to (erecovery)
and i wasn't able to validate the link for the specific device model
download twrp-3.1.1-0-venus.img
3- I tried rooting using Magisk by patching and flashing the (boot.img) file from (UPDATE.APP) file from this ROM (Huawei_P9_Lite_VNS-L31_C636B170_Asia_6.0) which is in different region than my original firmware
eventually I got stuck at ("Your device is booting now")
does anyone have an idea how to fix the problem?
aramous said:
Hi everyone
I hope someone can help me with this:
I'm trying to root my huawei p9 lite vns-l31 C185 B397
1- FRP and bootloader unlocked
2- I tried flashing and booting into TWRP recovery in fastboot mode using (twrp-3.5.2_9-0-a5y17lte.img) latest version but the phone always gets back to (erecovery)
and i wasn't able to validate the link for the specific device model
download twrp-3.1.1-0-venus.img
3- I tried rooting using Magisk by patching and flashing the (boot.img) file from (UPDATE.APP) file from this ROM (Huawei_P9_Lite_VNS-L31_C636B170_Asia_6.0) which is in different region than my original firmware
eventually I got stuck at ("Your device is booting now")
does anyone have an idea how to fix the problem?
Click to expand...
Click to collapse
- Install TWRP 3.1.0.2
Link
- Download Magisk.zip file
https://androidfilehost.com/?fid=673791459329054316
- Download and install Magisk manager 5.4.0
- Enter TWRP and flash Magísk.zip
- Reboot
Or, you can root your phone by installing SuperSu 2.8.2.zip in TWRP.
Awesome ! all done ! thanks a lot for your help !