Help! My lenovo vibe p1m is stuck on twrp. I had custom ROM installed, I decided to format. Now The phone starts into twrp and stucks in it. Tried to install costum rom again but the same problem.. then decided to restore stock rom.. but failed again. It is stucked in twrp. what can I do? help me please :crying:
I have same problem
musereridze said:
Help! My lenovo vibe p1m is stuck on twrp. I had custom ROM installed, I decided to format. Now The phone starts into twrp and stucks in it. Tried to install costum rom again but the same problem.. then decided to restore stock rom.. but failed again. It is stucked in twrp. what can I do? help me please :crying:
Click to expand...
Click to collapse
I have a same problem above u mention, if u find any solution please do share
Follow my easy video tutorial to unbrick lenovo vibe p1m
priyeshkumar88 said:
I have a same problem above u mention, if u find any solution please do share
Click to expand...
Click to collapse
Follow my video https://www.youtube.com/watch?v=-nzWrcZPRdU&feature=youtu.be
Related
As there are enormous bugs in the lolipop ota update for lenovo a6000 and a6000 plus I decided to revert back to Android KitKat.
Note: (For advanced users only) Go ahead if you have a little knowledge about flashing a stock rom.
1. Here is the link for the tutorial to revert back to KitKat for lenovo a6000 which also works for lenovo a6000 plus with some extra efforts
(although there is QFIL, flashing through the lenovo downloader is recommended as well as easy)
Mod edit: Link removed
Flashing requires a UPS backup or a laptop which won't shutdown in the middle as this process requires 6-8 mins
Done for Lenovo a6000.
IMP Note:
i. Do not unplug the usb cable if after plugging in the phone in download mode the adb interface driver is not installed by windows and flashing is started. Its normal.
ii. In lenovo downloader it will seem like the flashing is stuck after some seconds but it is not so the flashing is going on so DO NOT UNPLUG THE USB.
iii. In lenovo downloader in the step tab only the firehose is seen but it doesn't mean that flashing is stuck. Let the process finish without disturbing the USB cable. It will require 6 to 8 minutes or 15 minutes max.
Now futher steps for Lenovo a6000 plus:
This flashing will make your lenovo a6000 plus into lenovo a6000 and won't display ram and rom properly in device as well as your computer when connected via USB.
So for lenovo a6000 plus after flashing the lenovo a6000 stock rom:
2. you need to boot into cwm by fastboot https://youtu.be/giBK8LsL-Ko
3. and recover the cwm backup from the cwm recovery http://techolaty.net/lenovo-a6000-plus-stock-rom-cwm-backup/
4. Reboot your device from the same custom recovery after the restore is complete.
5. First boot will take up to 5-6 mins after that do a factory reset from the settings menu or from the stock recovery. If you don't perform a factory reset you will see your internal storage as 4.33gb only.
Video guide
All firmware updates work for Lenovo A6000 as we have flashed the original stock rom of lenovo A6000.
But as there is no stock rom available on the internet for lenovo A6000 plus, The minor firmware updates wont work for Lenovo A6000 plus it gives a status 7 error even after flashing the stock recovery, however the lollipop update gives an error status 14 but works fine.
Credits:
Boycracked
Ishtiyaq Husain
Techolaty.net
This can be done via recovery also
chhapil said:
This can be done via recovery also
Click to expand...
Click to collapse
yes but I was unable to boot into CWM in the lolipop I Don't know why. And I couldnt find any TWRP backup on the internet for lenovo a6000 plus.
ashutoshtaikar said:
I meant twrp backup file of stock kitkat rom is not available. I have the twrp recovery and it works for lolipop.
Click to expand...
Click to collapse
You dont need recovery backup to restore from recovery., You can flash the whole ROM all the way
this is too hard, but there is a simple way to revert back to kitkat
ashutoshtaikar said:
As there are enormous bugs in the lolipop ota update for lenovo a6000 and a6000 plus I decided to revert back to Android KitKat.
Note: (For advanced users only) Go ahead if you have a little knowledge about flashing a stock rom.
1. Here is the link for the tutorial to revert back to KitKat for lenovo a6000 which also works for lenovo a6000 plus with some extra efforts
(although there is QFIL, flashing through the lenovo downloader is recommended as well as easy)
Mod edit: Link removed
Flashing requires a UPS backup or a laptop which won't shutdown in the middle as this process requires 6-8 mins
Done for Lenovo a6000.
IMP Note:
i. Do not unplug the usb cable if after plugging in the phone in download mode the adb interface driver is not installed by windows and flashing is started. Its normal.
ii. In lenovo downloader it will seem like the flashing is stuck after some seconds but it is not so the flashing is going on so DO NOT UNPLUG THE USB.
iii. In lenovo downloader in the step tab only the firehose is seen but it doesn't mean that flashing is stuck. Let the process finish without disturbing the USB cable. It will require 6 to 8 minutes or 15 minutes max.
Now futher steps for Lenovo a6000 plus:
This flashing will make your lenovo a6000 plus into lenovo a6000 and won't display ram and rom properly in device as well as your computer when connected via USB.
So for lenovo a6000 plus after flashing the lenovo a6000 stock rom:
2. you need to boot into cwm by fastboot https://youtu.be/giBK8LsL-Ko
3. and recover the cwm backup from the cwm recovery http://techolaty.net/lenovo-a6000-plus-stock-rom-cwm-backup/
4. Reboot your device from the same custom recovery after the restore is complete.
5. First boot will take up to 5-6 mins after that do a factory reset from the settings menu or from the stock recovery.
I successfully reverted back my lenovo a6000 plus to kitkat and will upload a video guide soon on youtube.
Credits:
Boycracked
Ishtiyaq Husain
Techolaty.net[/QUO
this tutorial is for unbrick
for reverting back to kitkat there is a simple way
just flash twrp for lollipop and after that you can flash stock rom of kitkat..
goto mightylenovoa6000andplus.blogspot.com for more details about flashing twrp and stock rom
Click to expand...
Click to collapse
http://droidheap.blogspot.com/2015/12/lenovo-a6000-plus-storage-problems.html
This may cause the above problem which is listed in the link
plz help
guys
i have lenovo a6000 plus
i flashed lolypop stock rom by twrp
now my phone got bricked
my phone doesnt boot into twrp
i have tried in mobile repairs shop also but they also could not repair it
plz help me
srkale55 said:
guys
i have lenovo a6000 plus
i flashed lolypop stock rom by twrp
now my phone got bricked
my phone doesnt boot into twrp
i have tried in mobile repairs shop also but they also could not repair it
plz help me
Click to expand...
Click to collapse
Hahaha
It bricked my phone 100 times and repaired it myself
If you want help just contact me on
[email protected]
Sent from my GT-I9300I using Tapatalk
hai guys i need ur help i have bricked my phone and i am unable to get to download mode what shall i do
can some one make a stock recovery flashable kitkat rom
i tried to but its showing signature error
Kumarm93 said:
hai guys i need ur help i have bricked my phone and i am unable to get to download mode what shall i do
can some one make a stock recovery flashable kitkat rom
i tried to but its showing signature error
Click to expand...
Click to collapse
Unzip the stock zip then install system.zip and ota.zip
Sent from my GT-I9300I using Tapatalk
Lenovo A6000 Root Pop to Kitkat
i am tring QcomDloader For Root A6000 But by mistake Phone unpluged .tell me how revert back .mobile does not start.
how to Boot
hello guys,
my lenovo a6000+ phone got bricked when i was updating system update of MIUI7 custom rom & now it is not even booting recovery mode, how can i unbrick my phone any one to help??
can i use any stock rom on my lenovo a6000 plus ?????_ i have a file named as "Kraft-A6000-s_S015_150819_WCC8.zip
and if there is anybody knows the flashing process without cwm or any other custom recovery so plz gimme a link to understand it !!!!
dasanil0007 said:
hello guys,
my lenovo a6000+ phone got bricked when i was updating system update of MIUI7 custom rom & now it is not even booting recovery mode, how can i unbrick my phone any one to help??
Click to expand...
Click to collapse
Try to use adb first then flash new twrp
My A6000 plus is restarting continuously but it is entering in fastboot mode and download 9008 mode. Is it really a battery problem or something motherboard problem because I tried each and every method like flashing by QFIL with ROW firmwares like S013,S034,S061 etc. But phone isn't turning on normally it is bootlooping. Please help??. Not booting in stock recovery also.
hi guys
this is singh,i got my lenovo a6000 plus phone 6 months ago i have rooted my phone using king root.then i have flashed lolipop it went good.then after 5 days i flashed Cynagen 11 after that my phone got struck at boot screen as " LENOVO POWERED BY ANDROID ".then i have tried many ADB and flash drives but i was unable to get result same as above mentioned. so,is it my phone is totally bricked or it can be repaired pls reply
Unbrick dead Lenovo A6000 or revert to 4.4.4
Hey,
I tried the method : devs-lab. com/2015/10/how-to-unbrick-dead-lenovo-a6000-plus-or-revert-back-to-kitkat-4-4-4.html Even I bricked my device after installing CM 11. This article helped me unbrick it, very easily. I think CM11 is still buggy. Anyways, stock VibeUI (4.4.4) gives me around 400mb free (after boot 500mb) RAM after unbricking by the above method. :fingers-crossed: Amd yeah, after unbricking you can install OTA updates.
PS: I can't post links. Copy the above link in browser
Regards.
dont wory singh
dont wory singh. do u hav the correct version of cyanogenmod(ie kraft-t or k30-t).
plese check it . then dload the correct version and then using cwm flash....
same happened with me yesterday so i restarted the phone in TWRP and wiped the cache and problem solved and nothing deleted from the phone
Lenovo bricked
Thank u for ur msg I have done the twrp and I got my phone back.but can u tell where can I download a6000 + stock from I got flashed a6000 rom
hi everybody
i'm new at lenovo development thread ,and as i'am bored of laggy a6000 firmware especially after updates i decided to do root and flash custom roms so i did root successfully and installed TWRP recovery and then downloaded Carbon rom and placed it on memory and flashed "CM11 MoStock v1.48 .img"Kernel ,after flashing kernel system couldn't start and stucked on Lenovo logo and i think it's normal as the kernel not compatible with the stock rom so on TWRP i did wipe for data ,cach and dalvik cach and flashed the rom but i'm not sure if it was flashed properly or not it always says at the start of installation "not found MD5 " and after 2 minutes it say successful
after rebooting system it goes on bootloop and now i don't no what i have to do to please help me
http://forum.xda-developers.com/lenovo-a6000/help/unbrick-lenovo-a6000-plus-lenovo-a6000-t3137247
You can read my guide on how to fix nearly all software sided problems HERE.
I'd appreciate a Thanks! thrown my way!
try this tutorial
my phone lenovo a6000 once was bricked, and solved with follow those tutorial.
thnx every body i tried to flash another rom "MIUI 8" via recovery and finally it worked well
miz0ooo0 said:
thnx every body i tried to flash another rom "MIUI 8" via recovery and finally it worked well
Click to expand...
Click to collapse
Try using CM 12.1 by ED300.
if we are in any custom rom then how to flash different kernel.
if we directly flash through recovery then phone stuck on lenovo logo.
Hey guys it's Shubham here I'm new on XDA
Guys I have soft bricked my a6000 and just thing i can see now is Lenovo logo and it's not even getting on recovery mode with buttons combination
Please help me to get out of this
Even suggest me best rom on it with the performance and battery backup
I was going for MIUI 8 and
Recursion remix
Flash recovery again using fastboot mode and adb
The Hard Gamer said:
Flash recovery again using fastboot mode and adb
Click to expand...
Click to collapse
Any other way without PC or laptops bcoz currently my PC is for servicing
Nope
Bro I have Lenovo a6000 and I installed cm 13.1 and twrp I maked backup of my KitKat stock rom but by mistake I formated my sdcard which have the backup so no other backup I made now I am in trouble I want to go back to my stock KitKat ROM but there is no download mode in twrp . I googled for a twrp backup for a6000 but I don't find anything so read it post on unbricking Qualcomm devices so I need help from u please if you have Lenovo a6000 then please give a twrp backup file so I can get roll back to KitKat . I am using Indian version of a6000 or if u have any other safe method for it so suggest me.
I am able to go in twrp boot in cm13 os but for Lenovo downloader method we need download mode. So please help me urgently .. I am thankful to u for helping me.
Hello guys I have a6000 (Lenovo)
But my problem I saw this video
. Which is easy to revert back to kk rom but I have installed twrp which is not useful for above video method .so when I try to to install Philly or cwm which is used in above video it not installing only twrp will installing other custom recoveries not installing so please help me!!! If anybody have the twrp backup of stock kk rom of a6000 please send me!!
Hi, I have yu yureka plus yu5510a p2 which had stock Android 5.1 with locked bootloader, I have installed cm 12.1 from Rohit Jaiswal method. now after 2 months my device is keeps rebooting on yu logo even after flashing stock cm and whenever I try to flash via ygpd tool, it's not even getting detecting in that tool but device manager shows Android bootloader interface. Any solution for this?
any1 here? guys?
Happens with me also not also flashing any roms
Here is the fix. You don't need to change ROM or battery
https://m.youtube.com/watch?v=Q60ZkevoESc
I tried but messedup with it
siddhesh9146 said:
Hi, I have yu yureka plus yu5510a p2 which had stock Android 5.1 with locked bootloader, I have installed cm 12.1 from Rohit Jaiswal method. now after 2 months my device is keeps rebooting on yu logo even after flashing stock cm and whenever I try to flash via ygpd tool, it's not even getting detecting in that tool but device manager shows Android bootloader interface. Any solution for this?
Click to expand...
Click to collapse
Hi , flash twrp..
and install stable ROM... I had used Resurrection Remix OS with volte update. Its great. You too give a try