hi everybody
i'm new at lenovo development thread ,and as i'am bored of laggy a6000 firmware especially after updates i decided to do root and flash custom roms so i did root successfully and installed TWRP recovery and then downloaded Carbon rom and placed it on memory and flashed "CM11 MoStock v1.48 .img"Kernel ,after flashing kernel system couldn't start and stucked on Lenovo logo and i think it's normal as the kernel not compatible with the stock rom so on TWRP i did wipe for data ,cach and dalvik cach and flashed the rom but i'm not sure if it was flashed properly or not it always says at the start of installation "not found MD5 " and after 2 minutes it say successful
after rebooting system it goes on bootloop and now i don't no what i have to do to please help me
http://forum.xda-developers.com/lenovo-a6000/help/unbrick-lenovo-a6000-plus-lenovo-a6000-t3137247
You can read my guide on how to fix nearly all software sided problems HERE.
I'd appreciate a Thanks! thrown my way!
try this tutorial
my phone lenovo a6000 once was bricked, and solved with follow those tutorial.
thnx every body i tried to flash another rom "MIUI 8" via recovery and finally it worked well
miz0ooo0 said:
thnx every body i tried to flash another rom "MIUI 8" via recovery and finally it worked well
Click to expand...
Click to collapse
Try using CM 12.1 by ED300.
if we are in any custom rom then how to flash different kernel.
if we directly flash through recovery then phone stuck on lenovo logo.
Related
Please help needed!!
I'm stuck here for 3 days
Ok I'm going to tell everything I did,,
My Gionee E7 is indian version.
First I rooted my phone with kingo Root.
Than I flashed CWM chinese version.
I upgraded my system to kitkat and changed the recovery to stock.
I used it for a week than some how my music player and gallery were corrupted.
I don't have any rom so I download one but it was in chinese, flashed it to my gionee. than after rooting,,
I flashed the CWM, same I flashed weeks ago
Here my problem started :crying:
The CWM is not starting. I used recoery tool to boot into recovery after boot up it shows black screen. I used every method holding Vol+ and power button but the same result.
than I tired to get back to my stock recovery but it does the same.
flashed many times both recoveries but didn't worked.
I searched a lot and find a TWRP. I flashed it and wow it worked Finally I can boot into recoery mode.
Now I find the Nandroid backup of indian version. I made it a zip and flashed it through twrp.
My phone is back to indian version but its slow, not too much but its slow; camera, gallery and other apps take some time to open. I can't make or rcv phone calls. Now what i did is download the update form System update.
Now i got kitkat rom.zip but twrp failed to install it.
Some one on the internet was saying that its the problem with my Kernel. I have the latest kernel so CWM won't work cuz it uses old kernel and display drivers.
My
android version is 4.2.2
Kernel version is 3.4.0-svn2155
I also got TWRP for lolipop,
and I patched binary_update in my kitkat rom too but TWRP can't flash it
Thats my whooooolllleeeee story. "
I got stuck with this for almost 3 days now I'm damn tired can't do it anymore plz help :crying::crying::crying:
I figured it out by myself
Ok guyz didn't get any help so I figured it out by my self.
I'm posting it here so if anyone gets stuck like me could solve his issue
I used GNQC Download tool and flashed the whole firmware of my cell including, kernel, rom, recovery, boot everything.
Now I'm back to stock indian rom (jellybean) with stock recovery and now I'm going to upgrade to kitkat
I'm new user so I can't posts links just replace the (dot) in the link,
First download stock firmware of Gionee e7 in following link, GNQC download tool and drivers also included in this zip:
www(dot)androidxda.com/download-gionee-stock-rom-models
Just unzip it and follow the instructions on this site:
www(dot)androidxda.com/gnqc-downlod-tool
I didn't slept last night bcuz of this mess now going to sleep whole day :silly:
Goodnite and bless you all :angel:
AkashX4686 said:
Ok guyz didn't get any help so I figured it out by my self.
I'm posting it here so if anyone gets stuck like me could solve his issue
I used GNQC Download tool and flashed the whole firmware of my cell including, kernel, rom, recovery, boot everything.
Now I'm back to stock indian rom (jellybean) with stock recovery and now I'm going to upgrade to kitkat
I'm new user so I can't posts links just replace the (dot) in the link,
First download stock firmware of Gionee e7 in following link, GNQC download tool and drivers also included in this zip:
www(dot)androidxda.com/download-gionee-stock-rom-models
Just unzip it and follow the instructions on this site:
www(dot)androidxda.com/gnqc-downlod-tool
I didn't slept last night bcuz of this mess now going to sleep whole day :silly:
Goodnite and bless you all :angel:
Click to expand...
Click to collapse
Hello my friend, please help me.
I am trying to flash stock inidan rom 4.2 but.. I installed all CWM for E7 found on the internet and I am getting black screen. I managed to Install TWRP but TWRP cannot flash the rom that I need to flash. I flashed a chinese 4.2 but is piece of garbage..
gngc-download-tool said that the com port is closed.
I have windows 64 is this the problem causing gngc not working?
No its not, it is working on 64bit windows very well.
In TWRP factory reset and format system and data, than install
Chinese 4.2 ROM. After that boot it and try it again.
It should work!
bllkarv said:
Hello my friend, please help me.
I am trying to flash stock inidan rom 4.2 but.. I installed all CWM for E7 found on the internet and I am getting black screen. I managed to Install TWRP but TWRP cannot flash the rom that I need to flash. I flashed a chinese 4.2 but is piece of garbage..
gngc-download-tool said that the com port is closed.
I have windows 64 is this the problem causing gngc not working?
Click to expand...
Click to collapse
For me...problem!
there´s a cwm recovery that flashes over the kernel...
i flashed it and than i was unable to go to recovery, every time i tried the phone power off
Solution: Flash the stock boot.img
Use the file according to the Android version...
Help
I just rooted my gionee elife e7. Flashed the chinese recovery which seemed to be the only one which would be compatible. But, while changing a few setting using pimp my rom, the software just stopped working. Errors keep showing up on the screen - "system.ui is not working", "android app is not working", I cannot even go the settings because "settings is not working". Third party apps still seem to work, so, whatsap and stuff continue to function. Doing a factory reset or flashing firmware again seem to be the only viable option.
But, when I try to load up the bootloader using the power and volume keys, it gets stuck on the screen showing the gionee logo and it reads 'fastboot mode' in the bottom left hand side corner. So,
a. can you offer any advice which may be useful ?
b. can you share the link from where you got a TWRP recovery which will work on the Elife ?
c. do you have any idea what exactly went wrong here ?
Any help you can provide will be appreciated because, it's my mausi's phone and I will have a very tough time explaining what really went down here.
Regards,
As there are enormous bugs in the lolipop ota update for lenovo a6000 and a6000 plus I decided to revert back to Android KitKat.
Note: (For advanced users only) Go ahead if you have a little knowledge about flashing a stock rom.
1. Here is the link for the tutorial to revert back to KitKat for lenovo a6000 which also works for lenovo a6000 plus with some extra efforts
(although there is QFIL, flashing through the lenovo downloader is recommended as well as easy)
Mod edit: Link removed
Flashing requires a UPS backup or a laptop which won't shutdown in the middle as this process requires 6-8 mins
Done for Lenovo a6000.
IMP Note:
i. Do not unplug the usb cable if after plugging in the phone in download mode the adb interface driver is not installed by windows and flashing is started. Its normal.
ii. In lenovo downloader it will seem like the flashing is stuck after some seconds but it is not so the flashing is going on so DO NOT UNPLUG THE USB.
iii. In lenovo downloader in the step tab only the firehose is seen but it doesn't mean that flashing is stuck. Let the process finish without disturbing the USB cable. It will require 6 to 8 minutes or 15 minutes max.
Now futher steps for Lenovo a6000 plus:
This flashing will make your lenovo a6000 plus into lenovo a6000 and won't display ram and rom properly in device as well as your computer when connected via USB.
So for lenovo a6000 plus after flashing the lenovo a6000 stock rom:
2. you need to boot into cwm by fastboot https://youtu.be/giBK8LsL-Ko
3. and recover the cwm backup from the cwm recovery http://techolaty.net/lenovo-a6000-plus-stock-rom-cwm-backup/
4. Reboot your device from the same custom recovery after the restore is complete.
5. First boot will take up to 5-6 mins after that do a factory reset from the settings menu or from the stock recovery. If you don't perform a factory reset you will see your internal storage as 4.33gb only.
Video guide
All firmware updates work for Lenovo A6000 as we have flashed the original stock rom of lenovo A6000.
But as there is no stock rom available on the internet for lenovo A6000 plus, The minor firmware updates wont work for Lenovo A6000 plus it gives a status 7 error even after flashing the stock recovery, however the lollipop update gives an error status 14 but works fine.
Credits:
Boycracked
Ishtiyaq Husain
Techolaty.net
This can be done via recovery also
chhapil said:
This can be done via recovery also
Click to expand...
Click to collapse
yes but I was unable to boot into CWM in the lolipop I Don't know why. And I couldnt find any TWRP backup on the internet for lenovo a6000 plus.
ashutoshtaikar said:
I meant twrp backup file of stock kitkat rom is not available. I have the twrp recovery and it works for lolipop.
Click to expand...
Click to collapse
You dont need recovery backup to restore from recovery., You can flash the whole ROM all the way
this is too hard, but there is a simple way to revert back to kitkat
ashutoshtaikar said:
As there are enormous bugs in the lolipop ota update for lenovo a6000 and a6000 plus I decided to revert back to Android KitKat.
Note: (For advanced users only) Go ahead if you have a little knowledge about flashing a stock rom.
1. Here is the link for the tutorial to revert back to KitKat for lenovo a6000 which also works for lenovo a6000 plus with some extra efforts
(although there is QFIL, flashing through the lenovo downloader is recommended as well as easy)
Mod edit: Link removed
Flashing requires a UPS backup or a laptop which won't shutdown in the middle as this process requires 6-8 mins
Done for Lenovo a6000.
IMP Note:
i. Do not unplug the usb cable if after plugging in the phone in download mode the adb interface driver is not installed by windows and flashing is started. Its normal.
ii. In lenovo downloader it will seem like the flashing is stuck after some seconds but it is not so the flashing is going on so DO NOT UNPLUG THE USB.
iii. In lenovo downloader in the step tab only the firehose is seen but it doesn't mean that flashing is stuck. Let the process finish without disturbing the USB cable. It will require 6 to 8 minutes or 15 minutes max.
Now futher steps for Lenovo a6000 plus:
This flashing will make your lenovo a6000 plus into lenovo a6000 and won't display ram and rom properly in device as well as your computer when connected via USB.
So for lenovo a6000 plus after flashing the lenovo a6000 stock rom:
2. you need to boot into cwm by fastboot https://youtu.be/giBK8LsL-Ko
3. and recover the cwm backup from the cwm recovery http://techolaty.net/lenovo-a6000-plus-stock-rom-cwm-backup/
4. Reboot your device from the same custom recovery after the restore is complete.
5. First boot will take up to 5-6 mins after that do a factory reset from the settings menu or from the stock recovery.
I successfully reverted back my lenovo a6000 plus to kitkat and will upload a video guide soon on youtube.
Credits:
Boycracked
Ishtiyaq Husain
Techolaty.net[/QUO
this tutorial is for unbrick
for reverting back to kitkat there is a simple way
just flash twrp for lollipop and after that you can flash stock rom of kitkat..
goto mightylenovoa6000andplus.blogspot.com for more details about flashing twrp and stock rom
Click to expand...
Click to collapse
http://droidheap.blogspot.com/2015/12/lenovo-a6000-plus-storage-problems.html
This may cause the above problem which is listed in the link
plz help
guys
i have lenovo a6000 plus
i flashed lolypop stock rom by twrp
now my phone got bricked
my phone doesnt boot into twrp
i have tried in mobile repairs shop also but they also could not repair it
plz help me
srkale55 said:
guys
i have lenovo a6000 plus
i flashed lolypop stock rom by twrp
now my phone got bricked
my phone doesnt boot into twrp
i have tried in mobile repairs shop also but they also could not repair it
plz help me
Click to expand...
Click to collapse
Hahaha
It bricked my phone 100 times and repaired it myself
If you want help just contact me on
[email protected]
Sent from my GT-I9300I using Tapatalk
hai guys i need ur help i have bricked my phone and i am unable to get to download mode what shall i do
can some one make a stock recovery flashable kitkat rom
i tried to but its showing signature error
Kumarm93 said:
hai guys i need ur help i have bricked my phone and i am unable to get to download mode what shall i do
can some one make a stock recovery flashable kitkat rom
i tried to but its showing signature error
Click to expand...
Click to collapse
Unzip the stock zip then install system.zip and ota.zip
Sent from my GT-I9300I using Tapatalk
Lenovo A6000 Root Pop to Kitkat
i am tring QcomDloader For Root A6000 But by mistake Phone unpluged .tell me how revert back .mobile does not start.
how to Boot
hello guys,
my lenovo a6000+ phone got bricked when i was updating system update of MIUI7 custom rom & now it is not even booting recovery mode, how can i unbrick my phone any one to help??
can i use any stock rom on my lenovo a6000 plus ?????_ i have a file named as "Kraft-A6000-s_S015_150819_WCC8.zip
and if there is anybody knows the flashing process without cwm or any other custom recovery so plz gimme a link to understand it !!!!
dasanil0007 said:
hello guys,
my lenovo a6000+ phone got bricked when i was updating system update of MIUI7 custom rom & now it is not even booting recovery mode, how can i unbrick my phone any one to help??
Click to expand...
Click to collapse
Try to use adb first then flash new twrp
My A6000 plus is restarting continuously but it is entering in fastboot mode and download 9008 mode. Is it really a battery problem or something motherboard problem because I tried each and every method like flashing by QFIL with ROW firmwares like S013,S034,S061 etc. But phone isn't turning on normally it is bootlooping. Please help??. Not booting in stock recovery also.
hi guys
this is singh,i got my lenovo a6000 plus phone 6 months ago i have rooted my phone using king root.then i have flashed lolipop it went good.then after 5 days i flashed Cynagen 11 after that my phone got struck at boot screen as " LENOVO POWERED BY ANDROID ".then i have tried many ADB and flash drives but i was unable to get result same as above mentioned. so,is it my phone is totally bricked or it can be repaired pls reply
Unbrick dead Lenovo A6000 or revert to 4.4.4
Hey,
I tried the method : devs-lab. com/2015/10/how-to-unbrick-dead-lenovo-a6000-plus-or-revert-back-to-kitkat-4-4-4.html Even I bricked my device after installing CM 11. This article helped me unbrick it, very easily. I think CM11 is still buggy. Anyways, stock VibeUI (4.4.4) gives me around 400mb free (after boot 500mb) RAM after unbricking by the above method. :fingers-crossed: Amd yeah, after unbricking you can install OTA updates.
PS: I can't post links. Copy the above link in browser
Regards.
dont wory singh
dont wory singh. do u hav the correct version of cyanogenmod(ie kraft-t or k30-t).
plese check it . then dload the correct version and then using cwm flash....
same happened with me yesterday so i restarted the phone in TWRP and wiped the cache and problem solved and nothing deleted from the phone
Lenovo bricked
Thank u for ur msg I have done the twrp and I got my phone back.but can u tell where can I download a6000 + stock from I got flashed a6000 rom
Hello everyone,
Im using my yureka since more than a year...I hav rooted, changed roms, kernels, softbricked, hardbricked and debricked and got rid of such sort of problems by following the posts in xda.
A month ago, i flashed stock rom cm11, rooted and flashed twrp recovery.. It worked good with no problems, but today while iam chatting, my phone freezed all of a sudden and switched off with no cause and thats it...ENDLESS BOOTLOOP!! :crying:
I tried flashing stock rom and other roms too...but same condition...bootloop continues...!! anyone expert or who know how to overcome this problem please help me in reviving my phone back to working...!! :crying: :crying:
anybody please share your knowledge regarding this issue...please suggest me any solution if you can...do what really these forums are meant for...!!
ravi44teja said:
anybody please share your knowledge regarding this issue...please suggest me any solution if you can...do what really these forums are meant for...!!
Click to expand...
Click to collapse
just wipe data,cache,system,dalvik and flash any rom...
or try flashing stock recovery via fastboot and install stock rom
if u are on cm11 use stock recovery for cm11 and flash cm12 rom via cm11 recovery
let me knw if this wrkd
Abhi_569 said:
just wipe data,cache,system,dalvik and flash any rom...
or try flashing stock recovery via fastboot and install stock rom
if u are on cm11 use stock recovery for cm11 and flash cm12 rom via cm11 recovery
let me knw if this wrkd
Click to expand...
Click to collapse
thanks for ur reply buddy...i tried ur suggestion...but didnt work..
actually, when no procedures worked, i myslf hardbricked phone by flashing cm12.1 using kitkat flashtools, its screen gone blank and bricked and then i used the sd card method of debricking mentioned here http://forum.xda-developers.com/yureka/help/guide-unbrick-hard-bricked-yureka-t3303112
it then came upto cyanogen logo and hanging there, i tried flashing cm12.0 and same stuck at cyanogen logo..then i flashed cm11 stock rom, it booted up and switched on...
but now,
(1) wifi not switching on,
(2)Internal memory corrupted and showing error while opening file explorer as "there is no information available for the file system" , "the file or folder was not found" and internal memory not showing in pc..
(3) while opening camera it shows "revert to default file location", "insert SD card before using the camera" and unable to capture photos
(4) while trying to take screenshot, in notification panel it shows "couldnt capture screenshot, couldnt save screenshot, storage may be in use"
(5)sim cards not detecting at all
in cm 12.0 and 12.1, its nomore beyond cyanogen logo...:crying:
Fixied ?
Hell7 said:
Fixied ?
Click to expand...
Click to collapse
not yet bro
I tried to install a custom rom on a a6000. I installed the lolipop stock rom on top of the KitKat stock rom, and managed to boot to it without a problem. I then installed TWRP installed is: 3.3.1-0, and tried to install a custom rom (more specifically I tried this unofficial Lineage). For some reason, the installation fails with:
e3004: This package is for device: Kraft-T, a6000, K30-T,A6000, Kraft-W, Kraft-C, k30t, msm8916,Kraft-A6000,wt86518; this device is .
Updated process ended with ERROR 7
Click to expand...
Click to collapse
when booting into the stock lolipop rom installed I can see that the device is the A6000. I find it strange how the recovery doesn't write which device it is on this error message.
What am I missing here? Usually with other phones, as long as you manage to install a custom recovery then it's a breeze. I cannot figure out how the custom roms don't get installed. Any help appreciated
Managed to flash it in the end. The flash files contain assertions checking if the zip is okay to be flashed on the device (whether the model is the one intended for example).
I found it strange that the error message did not show the model of my device as I was 100% sure it is a A6000 and that is a ROM intended for it.
I ended up overriding the assertion in the file, which seemed to be straightforward to do and the image was flashed without any issues.
DO NOT TRY THIS AT HOME unless you are 10000% sure the image is intended for the device. ?
runningdap said:
I tried to install a custom rom on a a6000. I installed the lolipop stock rom on top of the KitKat stock rom, and managed to boot to it without a problem. I then installed TWRP installed is: 3.3.1-0, and tried to install a custom rom (more specifically I tried this unofficial Lineage). For some reason, the installation fails with:
when booting into the stock lolipop rom installed I can see that the device is the A6000. I find it strange how the recovery doesn't write which device it is on this error message.
What am I missing here? Usually with other phones, as long as you manage to install a custom recovery then it's a breeze. I cannot figure out how the custom roms don't get installed. Any help appreciated
Click to expand...
Click to collapse
Hi... Actually you can flash custom ROM on Lenovo a6000.
Im also using Lenovo a6000 and I'm running custom ROM.... feel free to Reply if u need any help..I'm glad to see that you will.?