So, as the title says, i found this video on how to get Xposed on my J500-H(Link below for reference). After I got it, I installed a few plugins, everything was fine. After exploring the app for a while i noticed there was an update, so clicked it and told me to reboot, fine. after rebooting the android boot logo pops up and half of the Samsung boot tune plays."Huh, that's funny" I say. I sit there, and sit there, and sit the- its been 20 mins. So I go onto XDA and see of there is a solution. I have tried mostly all of them and nothing has worked. I tried deleting the file in data, but it wasn't there. I go and read I can go into safe mode and uninstall it, I couldn't find out how because it requires you to be actually on the phone. I try a few terminal codes, that didn't work. And i finally do a factory reset,nope. So i kind of don't know what to do, right now my phone is a brick that gets very hot. If you have any suggestions, PLEASE, let me know. Thank you in advance, :crying: . Also my phone is running Android lollipop 5.1.1 stock touchwiz.
Link: i am not allowed to post it because i am new, so put this into youtube, "HOW TO install xposed on samsung lollipop 5.1.1" it should be the first one.
JO0SH said:
So, as the title says, i found this video on how to get Xposed on my J500-H(Link below for reference). After I got it, I installed a few plugins, everything was fine. After exploring the app for a while i noticed there was an update, so clicked it and told me to reboot, fine. after rebooting the android boot logo pops up and half of the Samsung boot tune plays."Huh, that's funny" I say. I sit there, and sit there, and sit the- its been 20 mins. So I go onto XDA and see of there is a solution. I have tried mostly all of them and nothing has worked. I tried deleting the file in data, but it wasn't there. I go and read I can go into safe mode and uninstall it, I couldn't find out how because it requires you to be actually on the phone. I try a few terminal codes, that didn't work. And i finally do a factory reset,nope. So i kind of don't know what to do, right now my phone is a brick that gets very hot. If you have any suggestions, PLEASE, let me know. Thank you in advance, :crying: . Also my phone is running Android lollipop 5.1.1 stock touchwiz.
Link: i am not allowed to post it because i am new, so put this into youtube, "HOW TO install xposed on samsung lollipop 5.1.1" it should be the first one.
Click to expand...
Click to collapse
Your system is somehow corrupted by the xposed. You probably have your OEM unlock on, so you can easily flash stock ROM with odin. It will resolve the bootloop.
Did you install the right xposed version by wanam?
if no, reflash with odin
JO0SH said:
So, as the title says, i found this video on how to get Xposed on my J500-H(Link below for reference). After I got it, I installed a few plugins, everything was fine. After exploring the app for a while i noticed there was an update, so clicked it and told me to reboot, fine. after rebooting the android boot logo pops up and half of the Samsung boot tune plays."Huh, that's funny" I say. I sit there, and sit there, and sit the- its been 20 mins. So I go onto XDA and see of there is a solution. I have tried mostly all of them and nothing has worked. I tried deleting the file in data, but it wasn't there. I go and read I can go into safe mode and uninstall it, I couldn't find out how because it requires you to be actually on the phone. I try a few terminal codes, that didn't work. And i finally do a factory reset,nope. So i kind of don't know what to do, right now my phone is a brick that gets very hot. If you have any suggestions, PLEASE, let me know. Thank you in advance, :crying: . Also my phone is running Android lollipop 5.1.1 stock touchwiz.
Link: i am not allowed to post it because i am new, so put this into youtube, "HOW TO install xposed on samsung lollipop 5.1.1" it should be the first one.
Click to expand...
Click to collapse
What about googling 'xposed uninstaller'??
@Taivotat2 can you direct me to the right uninstaller cause i dont know the platform and sdk for it
Haxomen said:
Your system is somehow corrupted by the xposed. You probably have your OEM unlock on, so you can easily flash stock ROM with odin. It will resolve the bootloop.
Click to expand...
Click to collapse
can you link me to the stock rom please?
JO0SH said:
can you link me to the stock rom please?
Click to expand...
Click to collapse
Here is all official firmware for the J510FN, just find your country.
https://www.sammobile.com/firmwares/galaxy-j5-/SM-J510FN/
Related
First want to say hi and that this site is full of knowledge so any help with my subject will be great.
Got a att s4 sgh-i337 phone. I rooted it before the lollipop ota update was out and everything went fine. Then the lollipop update came out and I followed one of the methods on keeping root and updating to 5.0.1 lollipop on the phone. Everything went fine with that. Still showed root status and never did the phone brick or have any issues in the updating.
At some point though, I did run triangle away because I would have the custom logo and opened padlock when the phone would boot up. I knew it wasn't a huge deal but the counter showed correct and never could just figure out how to get it to go away. Either way, I did run it and I think rebooting twice, the factory loading image came back to it. Now it shows my current status as 0 for the counter and the binary is Official.
I have not tried to load any roms or nothing like this to the phone, just followed the instructions to give it root access so I could run a few different apps and adaway for when I listen to Spotify.
One day, I was trying to install a new version of Words with Friends and it failed because I think wwf was open, but I did go back and install it. For some reason now, my phone never notifies my with a wwf notification when somebody plays me. Every now and then, it might pop up when I restart the phone but that is it. I don't think facebook notifies me everytime also but was more worried about words with friends.
Searching google, it says to go into recovery mode and flash the cache of the phone there. I have done the cache memory in the phone but that has not fixed my problem. When trying to go to recovery, it never works, it would always show, recovery booting and then load the phone up as normal.
I have download quick boot and rom manager since they all have an option to boot into recovery rather than pressing the buttons but it always does the same thing. Reading the web though, it seemed like I needed to install a different recovery than the factory I guess, so using rom manager, I tried twrp and that didn't work so I installed ClockworldMod 6.0.4.7. Rom manager shows that as the current recovery method.
When I try to boot into recovery, it still shows that recovery is booting and then goes straight to loading the phone as it should normally.
Now though, every time I restart my phone, it says recovery is trying to boot but never does.
How do I fix my phone to be able to boot into recovery and it not try to boot every time it powers on. I have tried searching google but I just just can find an answer to my direct problem. I know how to hold the buttons and go to recovery but does not work, and I also know how to get to it from the different app programs(rom manager and quick boot) but they do not work either. It would be nice to get the wwf notifications to work properly again also.
If you need any information from my phone, please ask. Thanks for any help on my matter,
Charlie
Odin stock and start over.
Apparently, you are not aware that the boot loader is locked, preventing the installation of a custom kernel. You can not use twrp, or rom manager. Rom manager itself may cause issues.
I agree you should flash back to stock and start over to get a clean install. Hopefully, this will solve the issues with notifications as well. You can use the "[GUIDE]Odin to Stock, Updating, Rooting, and Installing Safestrap" by guut13 in the general forum for files and instructions.
creepyncrawly said:
Apparently, you are not aware that the boot loader is locked, preventing the installation of a custom kernel. You can not use twrp, or rom manager. Rom manager itself may cause issues.
I agree you should flash back to stock and start over to get a clean install. Hopefully, this will solve the issues with notifications as well. You can use the "[GUIDE]Odin to Stock, Updating, Rooting, and Installing Safestrap" by guut13 in the general forum for files and instructions.
Click to expand...
Click to collapse
Thanks for the replies guys, I really don't know a whole lot about rooting other than following instructions about it. I was unaware you could not use the twrp or cwr as a recovery. My recovery did not work before so that is why I was trying to install those. I knew you could not install custom roms but I did not know that you could not use rom manager to install custom recoveries.
I appreciate the help so far and I will look into that thread you mentioned. I haven't read it but will this take me back to stock lollipop 5.0.1 and I just reinstall apps or will I have to re-root the phone.
Charlie
please delete, sorry
Charlie
You have to go back to 4.4.4, to the nb1 base, root with towelroot, and then use the keeproot method to get back to 5.0.1 rooted. The instructions are in the guide, and also a link to the keeproot thread is there.
By the way, for future reference, questions, help and troubleshooting issues should go in the Q&A forum, not the general forum.
not having any luck
Ok guys,
I am trying to follow the guide but not having much luck.
I downloaded the I337UCUFNB1_4.4_Stock_Odin_tar and put it in the AP Odin file. I'm not sure if I should be using it or the other file named I337UCUFNB1_4.4_Rootable_Stock_Odin_tar to begin with. The instructions said to use the first one so that is the one I was trying to use.
After putting the first file in the AP slot of Odin and hitting start, it begins to try to do it's thing and then says it fails!
What do I do now? Am I doing something wrong or what because I'm trying to follow instructions but not having much luck.
Please help. Sorry for posting in the wrong area also in the beginning.
Charlie
I'm screwed
Now when I turn my phone on, it says Firmware upgrade encountered an issue. Please select recovery mode in Kies and try again?
doing better now
Pretty sure I got it going finally. I changed cords and then changed ports on my computer and it finally did go back to stock without an error. I'm currently back on Lollipop and rooted so now is the fun of reinstalling contact info and anything else. So far I have not rebooted but it was not showing the recovery booting option when it did reboot. Hoping my notifications work properly now also!
Thanks!!!
Charlie
Hello,
I followed the guide for the Working Root Method For 5.0 Lollipop ROms and I was on BOK3 and everything actually worked and the phone was rooted, good to go. I was able to start the phone, installed busybox and safestrap, everything mentioned on the page, phone was good and working. However, I made a mistake. When I went to wipe the data so I could install a ROM I somehow managed to format, or wipe something I was not supposed to. Now, everytime I turn the power on it sticks on the Samsung Galaxy S5 page with the "Custom" wording and the open lock. I have been able to get to the download mode and when I tried to Odin to G900VVRU2BOK3_G900VVZW2BOK3_G900VVRU2BOK3_HOME.tar it says it passes, but still freezes on the "Custom" power on page. I honestly don't know what else I can do to try to get the device to power on/restore it, I've tried the N2 Kernal from the same page as the the tar and it doesn't get me anywhere, though it also says it passes. I'll be up for work in a few hours and if you have anything for me to try or requests for additional information I'll see what I can.
I have attempted to run the root bat file, just to see if it works, but that will not even list the phone.
Thank you,
Dale.
If you flash NK2 kernel and try to boot into lollipop, you're definitely going to freeze on boot because lollipop can't boot with a kitkat kernel.
Flash BOK3 stock image in Odin again. That image has the kernel in it also, so you don't need to flash anything else. Then boot into stock recovery (hold vol+UP and power), clear cache, then reboot.
If that doesn't work, boot back into stock recovery, clear cache and factory reset, then reboot.
That may work.
Thanks for the help. I don't know what I was thinking last night/this morning. All set now! For some reason now it didn't root when I went back through the procedures, but that is a problem to solve at a different time. I appreciate your calm response to my panic.
dhessjr2291 said:
Thanks for the help. I don't know what I was thinking last night/this morning. All set now! For some reason now it didn't root when I went back through the procedures, but that is a problem to solve at a different time. I appreciate your calm response to my panic.
Click to expand...
Click to collapse
You're welcome
Hi everyone, I've searched and tried some solutions for this but the problem is the display is permanently black, not even samsung logo is displayed on bootup.
My GT-i9505 has a CWM recovery installed and a custom ROM, and today it notified me that SU Binary needs to be updated, so I updated it and it said Success, recommend to reboot, which I did.
It seemed to boot up but the display was constantly black. Manually turned it off by holding down power button, then restarted but still nothing.
I have Odin and samsung drivers etc, just not sure if I should try and flash a stock/new Custom ROM from Odin or if theres an easier way to do it (maybe someone can guide me thru the CWM recovery and be my eyes since my screen is Black?)
Please and thank you.
First of all, you better switch to TWRP.
Second, maybe try flashing a SuperSU zip through the recovery.
If that doesn't work, then try dirty flashing your current rom again.
GDReaper said:
First of all, you better switch to TWRP.
Second, maybe try flashing a SuperSU zip through the recovery.
If that doesn't work, then try dirty flashing your current rom again.
Click to expand...
Click to collapse
Thanks for the goble-de-goop, I have no idea what you are saying (this is n00b friendly forum topic!) and how can I even try that when there's nothing but blackness on my screen?
It is booting and running, touch is working etc but I'm completely blind. Can someone please try to help with n00b friendly suggestions, will flashing a new Custom ROM work? And I'd like to know what has happened after the SU binary update that caused screen/backlight to become non-functional...
Just to point out, I'm not being rude I am being up-front, the first reply I get from here is exactly what I expected, not n00b friendly but more of a suggestion from a nerd who wants to show the other readers that he really 'knows his stuff', however un-useful it is.
I know a little but not enough to solve this on my own, I'm hoping someone out there see's this and unselfishly suggests something without turning it into debate about n00bs not asking the right questions in the right place at the right time!
My phone doesn't work, I need it to work, stupid SU binary update has screwed it, please help!
Pandemic_ said:
Thanks for the goble-de-goop, I have no idea what you are saying (this is n00b friendly forum topic!) and how can I even try that when there's nothing but blackness on my screen?
It is booting and running, touch is working etc but I'm completely blind. Can someone please try to help with n00b friendly suggestions, will flashing a new Custom ROM work? And I'd like to know what has happened after the SU binary update that caused screen/backlight to become non-functional...
Just to point out, I'm not being rude I am being up-front, the first reply I get from here is exactly what I expected, not n00b friendly but more of a suggestion from a nerd who wants to show the other readers that he really 'knows his stuff', however un-useful it is.
I know a little but not enough to solve this on my own, I'm hoping someone out there see's this and unselfishly suggests something without turning it into debate about n00bs not asking the right questions in the right place at the right time!
My phone doesn't work, I need it to work, stupid SU binary update has screwed it, please help!
Click to expand...
Click to collapse
...err...wow...
do you have a HDMI adaptor cable aka MHL adaptor or a chromecast type device at home ? it maybe that your screen has just died and that it's nothing to do with the binary (if it's booting normally albeit with a blank screen).
_neutron_ said:
...err...wow...
Click to expand...
Click to collapse
Starting to think XDA is not the right place to ask for help...
3mel said:
do you have a HDMI adaptor cable aka MHL adaptor or a chromecast type device at home ? it maybe that your screen has just died and that it's nothing to do with the binary (if it's booting normally albeit with a blank screen).
Click to expand...
Click to collapse
Good idea, I do have chromecast but will need mini HDMI cable/adaptor to check. Although it would be massive odds against random screen death, since it was immediately after reboot from SU binary.
Thanks for the intelligent reply, glad to see there are still some helpful people here.
if you can borrow a lead and your screen is being mirrored you can download an image file of TWRP and flash it with flashify from the store. I doubt screen mirroring works from the recovery
http://play.google.com/store/apps/details?id=com.cgollner.flashify
unzip the attached file and copy it to your SDcard then find it within the flashify app...
Awesome OK that gives me a starting point TY. When I connect the MHL adapter will it mirror automatically or will I have to try to blindly press the mirror symbol? I haven't used an MHL adapter/cable before. If it works then I'll use Flashify and hope it restores the phone screen.
if it's going to work it will work without any selecting of options, it's automatic...
If the you run out of solutions, you could flash a stock ROM back to your phone as this will bring the phone back to the factory settings; however, you will lose your data and installed apps.
If you decide to flash back to stock using Odin, I suggest launching Odin, uncheck everything except f.reset time, connect the phone in download mode, flash the rom, when you see the word "reset" in the status window, remove the USB cable from the phone, remove the battery, wait 5 seconds and replace the battery, boot into recovery, perform a factory reset, and reboot. Be sure to use the stock firmware from sammobile.com for your phone.
Pandemic_ said:
Thanks for the goble-de-goop, I have no idea what you are saying (this is n00b friendly forum topic!) and how can I even try that when there's nothing but blackness on my screen?
It is booting and running, touch is working etc but I'm completely blind. Can someone please try to help with n00b friendly suggestions, will flashing a new Custom ROM work? And I'd like to know what has happened after the SU binary update that caused screen/backlight to become non-functional...
Just to point out, I'm not being rude I am being up-front, the first reply I get from here is exactly what I expected, not n00b friendly but more of a suggestion from a nerd who wants to show the other readers that he really 'knows his stuff', however un-useful it is.
I know a little but not enough to solve this on my own, I'm hoping someone out there see's this and unselfishly suggests something without turning it into debate about n00bs not asking the right questions in the right place at the right time!
My phone doesn't work, I need it to work, stupid SU binary update has screwed it, please help!
Click to expand...
Click to collapse
Since you said you have CWM recovery and a rom installed I assumed you would knew how to flash stuff. Unless they were flashed by somebody else?
Anyway, flashing SuperSU.zip is as easy as googling for the zip then boot into recovery and flash the zip file.
Unless the recovery is dark too. Then that's a problem.
And flashing the rom again is done the same way. No need for TVs and chromecasts.
Theoretically, flashing the SuperSU.zip should work, as it replaces the binaries.
Flashing the rom should work too. Unless you have a dead screen. Then no software can fix it.
When you're using apps that modify system files things like this can happen. Something may have went wrong during the update.
@GDReaper he's already said "how can I even try that when there's nothing but blackness on my screen?" to your suggestion of flashing via recovery so MHL will help him
1) to see if the phone is running normal minus the screen
2) to replace CWM as you suggested without using recovery (which he won't be able to do even with MHL).
3mel said:
@GDReaper he's already said "how can I even try that when there's nothing but blackness on my screen?" to your suggestion of flashing via recovery so MHL will help him
Click to expand...
Click to collapse
So I probably misunderstood him. He said it is booting and so I thought that, during the booting, the screen works, and only when you are about to go into the OS the screen is black (As it happened to me before). My bad.
If the screen is black during the whole process it means the screen is busted. And it was probably just a coincidence, as I don't really see how updating the su binaries can damage the screen.
GDReaper said:
So I probably misunderstood him. He said it is booting and so I thought that, during the booting, the screen works, and only when you are about to go into the OS the screen is black (As it happened to me before). My bad.
If the screen is black during the whole process it means the screen is busted. And it was probably just a coincidence, as I don't really see how updating the su binaries can damage the screen.
Click to expand...
Click to collapse
Ok thanks man, it's dark in recovery too unfortunately. Will update again after trying the MHL cable. :good:
Pandemic_ said:
Ok thanks man, it's dark in recovery too unfortunately. Will update again after trying the MHL cable. :good:
Click to expand...
Click to collapse
Ok. Then it is definitely a screen problem. Changing software won't fix it.
You have to get a new screen.
I've tried the cable, no output to HDMI though. Phone is operating but in complete black screen from power on. Have tried to tap the screen mirroring button blindly (by touching all the top system buttons one by one) but no change. This leads me to think it is a software/firmware issue, somehow the SU binary has affected graphics output???
So my only chance now is try to flash using Odin? I have downloaded a new Custom ROM, ResurrectionRemix-M-v5.6.4-20160223-jfltexx but I think I can only flash that one using recovery which will be difficult blind, unless someone can give me precise button sequence. Unfortunately I can't remember exactly what recovery I have on there, but I think it may be the touch version...
I flashed TWRP using Odin no probs, but still no use as screen is still blank from power on.
I was going to revert to stock first but sammobile.com downloads at only 15kb/s so I'm not waiting 2 days for that 1.5gb download.
Can someone please give me a link to a good download for my GT-i9505, that I can flash with Odin. I want a light Custom ROM but if not possible to flash from PC then I'll try stock first.
Thanks,
Hi guys, I have a similar problem. I had a notification saying I need to "Update the #SU Binary". There was issues with the update, it gave me the option of restarting or trying the update again. I selected to try the update again. It failed again and now the screen is black with constant error messages, saying "Unfortunately, Galaxy Apps has stopped", "Unfortunately, S Health has stopped". Pretty much the same error message recurring with every app that would normally run on start up, then the phone just reboots itself every 5 minutes after the error messages have all done a round. I am desperate to recover the data on the phone.
Pandemic_ said:
I flashed TWRP using Odin no probs, but still no use as screen is still blank from power on.
I was going to revert to stock first but sammobile.com downloads at only 15kb/s so I'm not waiting 2 days for that 1.5gb download.
Can someone please give me a link to a good download for my GT-i9505, that I can flash with Odin. I want a light Custom ROM but if not possible to flash from PC then I'll try stock first.
Thanks,
Click to expand...
Click to collapse
SamFirm should speed things up.
---------- Post added at 07:37 AM ---------- Previous post was at 07:34 AM ----------
leNoobe said:
Hi guys, I have a similar problem. I had a notification saying I need to "Update the #SU Binary". There was issues with the update, it gave me the option of restarting or trying the update again. I selected to try the update again. It failed again and now the screen is black with constant error messages, saying "Unfortunately, Galaxy Apps has stopped", "Unfortunately, S Health has stopped". Pretty much the same error message recurring with every app that would normally run on start up, then the phone just reboots itself every 5 minutes after the error messages have all done a round. I am desperate to recover the data on the phone.
Click to expand...
Click to collapse
There isn't much you can do. Backup user data and factory reset.
Credit goes to dbgr for finding this:
https://forum.xda-developers.com/idol-4s/how-to/6055u-root-method-t3598947
Link to download .rar:
https://mega.nz/#!U24zwYbQ!MwbIX_D01OyHHldd8c_9iCmht6wzcw1duNpGO-PRyWI
This is just a simpler, more detailed guide on how to root this phone.
Forgive me for the lack of pictures, its pretty straightforward anyways. I have included a .rar with this post that has all the essential files you will need.
(I only compressed the .rar, everything else credit goes to the creators)
1. Download the rootpackage.rar i have included, and decompress to somewhere safe.
2. Install SugarQct and install the drivers that came with it. (In the SugarQct installer, not the usb driver folder)
3. After that has finished, open the usb driver folder and run the setup.vbs script there. It should only take a second or two to run.
4. Plug phone into pc.
5. Place supersu.zip onto phone. You can put this anywhere, doesn't really matter.
6. Turn phone off and place into download mode. (Phone must be plugged in to allow download mode)
4. Open sugar with phone plugged in. Be sure to upgrade sugar if you can't see the 6055u in the list.
Set to 6055u, go to options, select save user data. Now press upgrade.
5. While sugar is downloading overwrite the r*****.mbn in bin/6055-*****. This folder appears once you start to download to the phone. You must rename the twrp_recovery_idol4_6055.img to the name of the r*****.mbn.
6. Overwrite again while files are being written. Do this as many times as you please. I only overwrote it more than once as a safety precaution.
7. Before sugar has completed fully, but after files are written, this should be around the time when it starts to download more files. As long as the writing completes you are good to go.
8. Turn phone on and enter recovery mode (power + volume up).
9. In the custom recover menu tap install and install the supersu.zip from the directory you placed it in.
10. Give it a couple of seconds (mine took 30 or so)
11. Allow phone to be rebooted and its now rooted!
Now I've had some interest in using magisk instead of supersu, but i haven't been able to install it after supersu. Choose your rom to flash wisely, as its a pain in the ass to go back from.
Please enjoy your newly rooted Alcatel Idol 4!
Thanks all!
P.S. If someone can dump their standard rom before they flash supersu.zip onto their phone, i'd like to try and find a way to get a custom rom goin and that would help.
I'm not seeing the download for the .RAR file. Am I missing something?
SeanMcCarte said:
I'm not seeing the download for the .RAR file. Am I missing something?
Click to expand...
Click to collapse
I thought i attached it to the thread, give me a second and i'll try again.
Edit:
It seems my rar is too large, i'm headed to work now, but i'll try and get something uploaded in a bit.
Thank you. Much appreciated. Also,can I unplug the phone before rebooting to recovery,or does it have to be plugged in!
SeanMcCarte said:
Thank you. Much appreciated. Also,can I unplug the phone before rebooting to recovery,or does it have to be plugged in!
Click to expand...
Click to collapse
As far as i know it doesn't have to be, but when i was successful i believe i had the phone plugged in. I did try to do somethings earlier today and unplugged the phone, and it was not successful. I do not know if it was because i unplugged the phone or if it was because i had failed to rewrite the recovery flash.
Thank you. I actually didn't want to wait for .rar so I just pieced the files from the forum here. Thank you anyway,at least somebody else will get the RAR. Also,my phone was plugged in when it worked.
I got magisk working for me I unistalled super super went into twrp and installed magisk ( I needed magisk to play fire emblem heroes lol) I'm not sure if I did something else but that's what I remember doing
Is this guide working for all the idol 4 variants or just for the cricket one? I've got the 6055k and I'm wondering if this guide works for my phone too.
scofield119 said:
Is this guide working for all the idol 4 variants or just for the cricket one? I've got the 6055k and I'm wondering if this guide works for my phone too.
Click to expand...
Click to collapse
Theres another guide for the 6055k, i'm not sure if this will work for that one. I know it works for the cricket version and i see no reason why it wouldn't work for the 6055k, but it is a better idea to follow the guide made for the 6055k.
link22534 said:
I got magisk working for me I unistalled super super went into twrp and installed magisk ( I needed magisk to play fire emblem heroes lol) I'm not sure if I did something else but that's what I remember doing
Click to expand...
Click to collapse
Would you mind checking if snapchat works on magisk? I know it doesn't work on supersu, and i've unrooted my phone because i was having troubles getting it installed after supersu.
NeonWhitey said:
Would you mind checking if snapchat works on magisk? I know it doesn't work on supersu, and i've unrooted my phone because i was having troubles getting it installed after supersu.
Click to expand...
Click to collapse
Yep it works I had to change a setting to get magisk hied working it was magisk core only mode and I pass the netsaftey check
link22534 said:
Yep it works I had to change a setting to get magisk hied working it was magisk core only mode and I pass the netsaftey check
Click to expand...
Click to collapse
Thanks for the info, but funnily enough i'm having difficulties getting the damn thing rooted again.
Thanks for the write up, I've flashed and reflashed many times... you have to be carefully about when you interrupt the process. Also know that a newer version is out. Cheers mate.
I'm not sure if it's the latest version of Sugar, but I've been trying so many times, but to no avail. Has anyone had any luck on the new version?
SUGAR QCT_SP V11.3.0
I've gotten to the point that when I start the upgrade with Sugar, it says my phone is already rooted. However, when I try to access Recovery, there is no option to install TWRP. It looks like it just loaded the same old recovery...no matter how fast and how many times I replace the Rxxxxxx.mbn file.
Cheers,
Wickster
6055p
is there any guide to root 6055p model
no luck getting this to work guys, could really use some help
Having the same problems as PizzaG - tried all the timing tips no TWRP
Having the same situation as PizzaG - same Cricket version, using the newer version of Sugar QCT 11.1.3. I've tried starting right after it reaches the last written file (4095M), Ive even tried waiting until you get the vibrate and Alcatel logo (which happens at the very end of the download, but was someone's tip), same story, boots into Android recovery. Any other tips?
Possible Solution to Rooting Troubles
I was having the same troubles as the above posters. What seemed to be the problem was that I had set a pin code to unlock my device, which made it encrypted. Unfortunately, the only way to remove a pin is to do a factory reset. Anyway, I did a factory reset and ran sugar immediately after - making sure to start the phone before sugar finished - and it worked! Perhaps there is something simpler to do and I didn't have to do a factory reset, but I don't know what that is, and this worked.
Someone have try with the 6055A?
hmm, im noticing mine says encrypted as well but i never set anything for security. just the swipe. @ ThisEndsInTears did you do a factory reset from stock recovery or from withing the phone settings? Thanks much, hopefully one step closer to getting this rooted. Y has nobody developed cm for 6.0.1 for this? cm13 im pretty sure it is
I am super new to rooting I mainly use it for PokemonGo. I am following this video on YouTube.
Basically when I flashed via Odin, I then install Magisk. Then everything is working and rooted BUT when I restart my phone my Magisk is then magically unrooted (I dont know if this is the right term) it says 'Magisk is not installed' and underneath that is says 'Magisk Manager is up to date'
So why does it keep doing this? Everytime this happens I need to Flash again via Odin and do the whole procedure again. This only happens when I restart the phone. Why does it keep doing this and how do I fix this? I will pay someone who can fix this for me. Ive been trying to figure out for the past day and Im going insane. I have no knowledge about rooting etc like i said i just want to play Pokemongo location spoofing.
Appreciate everyones help.
Dude you're giving me......double vision! Oh oh
StoneyJSG said:
Dude you're giving me......double vision! Oh oh
Click to expand...
Click to collapse
What do you mean lol
littlepuppies said:
I am super new to rooting I mainly use it for PokemonGo. I am following this video on YouTube.
Basically when I flashed via Odin, I then install Magisk. Then everything is working and rooted BUT when I restart
Click to expand...
Click to collapse
Are You aware that you have to reboot via keycombo, just as you would boot into recovery and then release the buttons, after vibrate and samsung logo, or alternatively use an app like quick reboot pro ?
You have a double post of the same topic.
blackspy_ said:
Are You aware that you have to reboot via keycombo, just as you would boot into recovery and then release the buttons, after vibrate and samsung logo, or alternatively use an app like quick reboot pro ?
Click to expand...
Click to collapse
Yes but I'm not 100% sure if I'm doing it correctly. Well my magisk is installed so I'm doing it right? But like I said when I restart my mobile magisk is not installed in the app. May I ask what's this reboot Pro? If that will solve the restart problem I would.happily pay. Can you tell me more?I'm really nooby thank you sir
Im seeing doubles.