Can't connect Windows Mobile 6.1 to Windows Mobile Center - Windows Mobile Development and Hacking General

I have a Windows Mobile 6.1 device that I need to connect to Windows Mobile Center via Blutooth.
Note: The same steps Works with a Windows Mobile 5.1 device in the same computer, and I tested with two different computers.
I can pair the PC and the PDA without problem.
In the PC I run Windows Mobile Center.
In the PDA I run ActiveSync and select "Connect via Bluetooth".
The PDA open a window with the text "Openning port...".
The text changes to "User authenticated".
The window closes, and a full screen message with title "Synchronization Error" and text "This device is not allowed to connect to desktop computer" appears.
The PDA is a new and clean device. The computer isn't connected to Active Directory Domain. It has Windows 7 (the two computers tested)
I thing this is a security configuration, but I can't disable or grant access. The pair Works without any error, and I can see the pair settings on the PC and on the PDA.
Also: When I try to run an app (.exe) copied from SD Card or install (.cab) an error "This app is not signed with a trusted certificate" is shown, and I wan't to remove this block, but I can't edit register or Access via ActiveSync.
Note: I post similar questions on other forums, different to "xda" without response.
Thanks for your help!

In the end the problem was that the device was locked for security. The manufacturer sent me a cab to disable security, which in this case only annoyed.
If someone has the same problem, send me an email to duefectu(a)sd-a.com and I will forward the file.
Thanks for your time!

In the end the problem was that the device was locked for security. The manufacturer sent me a cab to disable security, which in this case only annoyed.
If someone has the same problem, send me an email to duefectu(a)sd-a.com and I will forward the file.
Thanks for your time!

Related

Trouble with activesync and my smartphone

Hi!
I have tried now on two computers (one old windows 2000 platforn with activesync 4.2 and the other with Windows Vista Ultimate x64 with WMDC) and on the old platform it starts to connect but after a while an error. On the new I get no connection to WMDC. I always use my USB cable. The cable works, both loads and turn my loadinglight from yellow to green. My smartphone is a QTEK 9100 Windows mobile 5.
The error occured after I did scan on the phone for duplicated files and removed them. Afterwards it just wont sync. I have tried some tools, turning of firewall, reinstaling and all of the stuff recommended on the WMDC but now I am lost
What should I do?
wwwlewis
You may have removed a critical file that you needed for syncing when you removed the duplicate files. Does whatever program you used for that have a restore option? If not, you may need to backup the files you want to save and do a hard reset.
I have tried a hard reset now and it still dosent work. Now I am deeply lost
Try going to start-->settings-->connections tab-->usb to pc and either check or uncheck the enable advanced network functionality check box and see if that fixes it.
I have the same problem...
I have the same problem, i can't sync with my pc. it only shows a balloon that said "Unrecognized Device". I can not find the usb to pc box to be checked... pls help me. thank you
I have tried to find the pc to usb tab but I just can´t find it. I am running a swedish version of wm 5, but it still should be under connections. But it isn´t.

Cannot Install Windows Mobile remote adapter (WMDC) Error 800F0204

I have recently installed Windows Vista on my computer and hooked up my also newly formatted PDA HTC TyTN with WM6 and as usual i cannot get them to work together, even speak. This by usb cable.
As i connected it to Vista it popped up asking me for a driver which i chose to install when Windows update said there was an update for it.
Error messages included:
This is my greeting message as soon as i start my computer and login to Vista:
http://www.premier69.com/images/stories/Capture.JPG
Installing the driver like Vista want to:
http://www.premier69.com/images/stories/Capture1.JPG
And the not so helpful error message:
http://www.premier69.com/images/stories/Capture2.JPG
If any of you would like, in order to help i can allow remote controlling of my computer.
I will offer compensation via paypal for anyone who will take the time to remote connect to my computer and fix my problem, i have been trying for a very long time now and i cant figure it out.
we can discuss level of compensation but be aware i am by no means rich.
If I understand u, try this
1- donlod Window device center from here
http://www.microsoft.com/downloads/...f1-e46a-4a5f-a791-09f07aaa1914&displaylang=en
choose for Windows Vista (32-bit) or (64-bit)
& let me know
I have already tried that, i downloaded the x64 version for my vista installation and i start the install file, the progressbar loads fully then retracts and the installations program self-closes. no messages or anything.
i am serious when i say i am really stumped by how my system is acting...
try installing WMDC in safe mode, sounds like a file permissions problem
yup i tried that too, it didn't even open the installation wizard.
Got same problem - fixed with changing registry permissions
hi guys,
i was battling with this for a few days after a reinstall of my laptop. updated to vista sp2 and there you go, couldnt sync and got the error.
after mucking about i saw there were some access denied errors for the registry. this is what i did to fix it:
registry key in question:
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Svchost\WindowsMobile
- Right click -> Permissions -> Advanced
- Took owner ship of the registry key
- Gave the Users group Full Control.
Then in device manager:
- Uninstalled my Microsoft Mobile Remote Adapter
- Scan hardware changes
and then it installed properly and am able to sync again
aj
thank you
Thank you thank you thank you thank you thank youuuuuuuuuuuuuuuuuuuuuuuuuuu
i have been in this issue since 2 days,and what got me crazy after i have read your post that I'm the one who restricted the access to this registry using a domain policy(I'm a network administrator) for security reasons,but i don't know why i didn't got it @ first.
I granted my self the permission and it was able to install the drivers and letting WMDC starts.
thank youuuuuuuuuuuuu again and again and again.
ajohan said:
hi guys,
i was battling with this for a few days after a reinstall of my laptop. updated to vista sp2 and there you go, couldnt sync and got the error.
after mucking about i saw there were some access denied errors for the registry. this is what i did to fix it:
registry key in question:
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Svchost\WindowsMobile
- Right click -> Permissions -> Advanced
- Took owner ship of the registry key
- Gave the Users group Full Control.
Then in device manager:
- Uninstalled my Microsoft Mobile Remote Adapter
- Scan hardware changes
and then it installed properly and am able to sync again
aj
Click to expand...
Click to collapse
I have a new HTC HD2 device and windows 7 enterprise on my laptop.
I did all, but no use
The Options, Schedule and status items in ActiveSunc are inactive.
Also when I open the ActiveSync, there is a message showed on my phone: "To synchronize your device with a desktop PC, install install synchronization software from your ....."
What can I do??????
Please help

ActiveSync 4.5 Problem

Hi everybody!
I'm having some trouble connecting a pocket pc to my pc. I'm getting the following error message from activesync when I try to establish a partnership connection:
"Cannot verify the version of ActiveSync on your device. A program such
as a firewall may be blocking a port ActiveSync uses to connect to the
device, or you may need to upgrade to a more recent version od
ActiveSync on the PC"
Even if I try to cardle a virtual pocket pc (visual studio) I get the above message.
I'm using activesync 4.5 on a windows xp service pack 3 pc. Installing AS 3.8 would solve the connection/partnership problem but I must use AS 4.5 because Visual Studio does not except older versions of AS.
I've tried so far everything: allowed all ports needed for AS (even deactivated the firewall) - I tried to delete the partnership folders but found out that they haven't even been created by AS.
Even google couldn't really help me: most people get this error message because they have installed a HSDPA usb modem driver from hauwei. But I did not.
does anyone have a solution for this strange problem?
thank you in advance!
I have the same problem. I once got into it through My Computer but since then I've had no luck whatsoever!
You have exactly the same problem?
if you're not using visual studio just install active sync 3.8 as mentioned above. But I found an uggly solution: Cardle you pocket pc - you will get the regular error message. then open the taskmanager and kill the process rapimgr.exe and restart it again (C:\Program Files\Microsoft ActiveSync)
Uncardle and recardle the pocket pc again - you will get a critical error message but it can be ignored. Now you will be able to accees your data.
To deploy your software on pocket pc with visual studio you might restart the remote rocedure call locator (Control panel -> administrative tools -> services)
hope I could help you! but I'm really not satisfied with this solution. I'm open for better ways to solve this problem.

Hard SPL, now can't create a data connection with PC

I used the Hard-SPL installation instructions posted here and was successful, but now my computer won't recognize my phone as a Windows Mobile device. I hear the notify sound when I connect the USB, but no data connection or active sync is established.
I went to Windows Update, and there is a driver for Other Windows Mobile Device that I can install, however it consistently fails with the error code 800F020B. When I looked up the code, it said that it was caused by my device not being connected to the PC.
Any suggestions? If I can't create a data connection. I won't be able to re-flash my rom with any more images, or set it back to manufacture default. Please help me!

Internet help!!!!!!

How do i set my internet to authentication mode?
I have id and password. But how do i put them in the PDA and
connet to internet??
I have a ipaq hx2750 with a wm 6.5
If you are talking about a WiFi connection then the device should ask you to enter the key after it finds the network. There is not much difference in connecting to a WiFi network with WM6.5, other than the new skin...
Its not just regular wifi. Its authentication mode.
Where you have to put in an id and a password.
Its different from other ntework keys where in other
ones you would just put in a passord with out an id.
You could read a Windows Mobile manual...
Try the Connection Tab under settings. When you've opened up your WiFi networks you can tap on them and change settings like acces mode etc.
where would this manual be?
I dont think a manual will help. Do you know the name of the authentication software used for connecting to this network?
Anyway try this program. Connect your phone using active sync and install it through the computer because there is no CAB file for this program.
Let me know if it works for you.
How do I even install it thorugh active sync?
I'm a noob.....how do I start active sycn anyways?
Plz help me...........
First off, do you have Windows Xp, Vista or Mac?
If it's XP you must install activesync from here
Install it and connect your device to your computer using the USB cable or bluetooth. When a connection is established, open the file I attached before and follow the instructions to install.
If you have Vista, you need Windows Mobile Device Center (WMDC)
If it is not already installed, download it from
here
Install and plug your device to your computer to establish a connection and follow the previous instructions.
If you have MAC, download the sync program from here
Install and follow previous instructions.
Hope this helps
Okay i got it installed but the problem is
the program does not show up on my
start menu or anywhere.......
where can i access this program?
You cant see it installed. Once you turn on wifi, go to start>settings>connections>wifi and select the network you are trying to connect to. In the dropdown menu where you select the security type of the network, select the Securew2 instead of wep or wpa and then the program opens and you can edit the settings.
Hm......i really don't see it........................................

Categories

Resources