I used the Hard-SPL installation instructions posted here and was successful, but now my computer won't recognize my phone as a Windows Mobile device. I hear the notify sound when I connect the USB, but no data connection or active sync is established.
I went to Windows Update, and there is a driver for Other Windows Mobile Device that I can install, however it consistently fails with the error code 800F020B. When I looked up the code, it said that it was caused by my device not being connected to the PC.
Any suggestions? If I can't create a data connection. I won't be able to re-flash my rom with any more images, or set it back to manufacture default. Please help me!
Related
Hi!
I have tried now on two computers (one old windows 2000 platforn with activesync 4.2 and the other with Windows Vista Ultimate x64 with WMDC) and on the old platform it starts to connect but after a while an error. On the new I get no connection to WMDC. I always use my USB cable. The cable works, both loads and turn my loadinglight from yellow to green. My smartphone is a QTEK 9100 Windows mobile 5.
The error occured after I did scan on the phone for duplicated files and removed them. Afterwards it just wont sync. I have tried some tools, turning of firewall, reinstaling and all of the stuff recommended on the WMDC but now I am lost
What should I do?
wwwlewis
You may have removed a critical file that you needed for syncing when you removed the duplicate files. Does whatever program you used for that have a restore option? If not, you may need to backup the files you want to save and do a hard reset.
I have tried a hard reset now and it still dosent work. Now I am deeply lost
Try going to start-->settings-->connections tab-->usb to pc and either check or uncheck the enable advanced network functionality check box and see if that fixes it.
I have the same problem...
I have the same problem, i can't sync with my pc. it only shows a balloon that said "Unrecognized Device". I can not find the usb to pc box to be checked... pls help me. thank you
I have tried to find the pc to usb tab but I just can´t find it. I am running a swedish version of wm 5, but it still should be under connections. But it isn´t.
Yesterday i tried to upgrade rom of my Qtek S200 device. I uploader temp rom after that when it comes to installation of wm6 rom my device could not connect to my pc via ActiveSync. I have Windows XP. When i plug the device to my pc it shows an error message : ""There was a problem installing this hardware Windows Mobile-based Device" What can i do please help me...
Put the device in bootloader, and flash a new WM5 NVID ROM.
http://wiki.xda-developers.com/index.php?pagename=Prophet_recovery
but i cannont connect my device with activesync when i try that it tries to find a driver. finds a driver and installs that but after that "There was a problem installing this hardware Windows Mobile-based Device" message appears and i can not connect my device to pc.
can i upgrade roms with Windows Vista?
Uninstall active sync. Restart. Re install activesync. Restart. Then put your device into bootloader. Disable connect through USB in active sync and then connect the device and PC and then try to flash a WM5 ROM.
Vista won't work with upgrading because of the drivers.
I had just write a post in my thread about this. I have the same problem intalling the device in PC.
Before I had put the actual ROM in my phone, I went to bootloader and inserted another ROM in this case an official one... right now I cannot go to bootloader . Do I have to do a HardSPL!? probably this is the solution for quaschi!
We wait for the opinion of more experienced members!
Hi,
I'm trying to install hard-spl to flash my TC with wm6.5 rom that I have made with kitchen available here.
Problem: ActiveSync connection is ok, I can sync, explore etc. But when I run ROMupdateutility.exe it gives connection error 202.
I don't see any security messages about running enterbootloader.exe or anything else either which is weird, just this 202.
I have tried to change phone's "enable advance network functionality" setting, no luck.
I have 2 pc's with WinXP, other one has no internet connection, firewall or anti-virus software, getting exactly the same result with both pc's.
I have tried different usb cable, port, many many soft resets...
There's Symantec SmartPhone Security on the phone, I have disabled the auto-protect, but no luck.
Any ideas???
ERROR [202, 204] : CONNECTION
This error message will appear when the device is not connected to ActiveSync correctly. Make sure you properly connect the device to the PC through ActiveSync before running RUU.
Have you tried a hard reset make a backup first as it removes all apps installed and data 'phone numbers text's', I think with Symantec SmartPhone Security removed as long as activesync works it should be ok.
Hi, hard reset seems to be the last way to try. I have read this forum 2 nights now and not found any other ideas :-(
Running wm6.5
Hard reset might be THE solution for many people I think.
first off I'm using windows xp sp2 and ActiveSync 4.5 for my tmus hd2. when my computer starts up i get the error wcescommmgr.exe failed to initialize properly.
i have tried unnstalling repeatedly but still same error and now i can't sync my phone. anyone have a clue here what could be wrong
bumping to get this some more views
any suggestions guys?
just untick the "enable faster connection" button on USB-PC dialog box, and try again.
ihave its not a problem with my phone settings its my computer. on startup i get an error tat says wcescomm.exe failed to initialize properly. it happens even if my phone isn't connected
or can someone tell me another program to use for syncing on win xp
so i suppose noone has had this issue?
Have you tried this:
http://social.answers.microsoft.com...c/thread/06013872-5bec-4d25-8d4b-7a9e23ee8c6a
yeah my computer isn't connected to the internet so i have firewalls turned off. ichecked services in admin tools and found nothing relating to ActiveSync. i really need to sync my phone. mmmy phone gets recognized as disk drive but ActiveSync is faster
ok so i tried tracking down registry entries but it was too confusing. i ado tried reinstalling ActiveSync to my other hard drive and it still does it. wcescomm.exe had failed to initialize properly (0x0000142)
thnx rpx1 it worked for the future its all about missing a profile to active sync.created new system profile aka user account and im good to go
Installed BsBTweaks on my HTC HD2, but now ActiveSync won't connect to my phone. PC O/S is Win XP SP2. I'm running WinMo 6.5 and have the latest ROM for the device from my provider, version 3.14.531.1. I get the message: "Critical communication services have failed to start. Try resetting the mobile device, and then connect again." I haven't yet made any changes to the device using BsBTweaks, I only installed it. Have tried rebooting the phone to no avail. I have to use Disk Drive mode to get at the pictures on my SD card. Is there a way to get ActiveSync working again? I'd probably donate to the developers if this problem could get corrected and I can reasonably figure to keep and use BsBTweaks. Thanks.
phlashlite said:
Installed BsBTweaks on my HTC HD2, but now ActiveSync won't connect to my phone. PC O/S is Win XP SP2. I'm running WinMo 6.5 and have the latest ROM for the device from my provider, version 3.14.531.1. I get the message: "Critical communication services have failed to start. Try resetting the mobile device, and then connect again." I haven't yet made any changes to the device using BsBTweaks, I only installed it. Have tried rebooting the phone to no avail. I have to use Disk Drive mode to get at the pictures on my SD card. Is there a way to get ActiveSync working again? I'd probably donate to the developers if this problem could get corrected and I can reasonably figure to keep and use BsBTweaks. Thanks.
Click to expand...
Click to collapse
Have you tried to restart your PC and try different port?
Sometime this trick works
silverwind said:
Have you tried to restart your PC and try different port?
Sometime this trick works
Click to expand...
Click to collapse
Restarted the PC - worked like a charm. Thanks a million. I can breathe again.
...And I just made a modest donation. Thanks very much.
Troubleshooting Sync Connection with Your Computer
You can often solve any temporary sync connection problems by disconnecting your phone from the sync cable, waiting a few seconds, and then reconnecting it. However, sometimes you may experience persistent problems related to your network connection (for example, your Internet connection). You may be unable to sync your phone while there is an active network connection on your computer, or the network connection may be cut when you connect your phone to your computer. If this happens, you can try switching to a serial USB connection for your phone:
1. On the Home screen, slide to the Settings tab.
2. Tap Menu > All Settings > Connections > USB to PC.
3. Clear the Enable faster data synchronization check box.
4. Tap Done.