Related
Hi .. anyone have an idea.. ??
Or have same problem ?
I got a message saying that no BT hardware is installed on the phone.. when trying to enable it ..
A soft reset fix it.. .. but even if I dont touch the s100 it get this after some time.. any clue..
Hardware or software glitch ??
Regards Carlis
mine sometimes does this i just click the bt icon again and it works? :?
gazzaman2k said:
mine sometimes does this i just click the bt icon again and it works? :?
Click to expand...
Click to collapse
I notice that if I go in and remove klick in inbound BT port , shut down BT and restart it .. .. I can use BT again if I stop it ( well strange it was off.. ) and start it again ..
This got realy bad after the Qtek s100 update.. .. but was there before to..
Hope it not Hardware.. .. hate if I must send it away..
Carlis
Well, I have the same problem. After updating with the new ROM-file my Qtek says: There is no BT hardware on this device. Strange!! Something wrong in the new ROM-file?
Before updating I had no problems whatsoever woth BT.
Peter
I only have this problem when calender+ 2.2 is install. have not try the 2.3.
cpes said:
Well, I have the same problem. After updating with the new ROM-file my Qtek says: There is no BT hardware on this device. Strange!! Something wrong in the new ROM-file?
Before updating I had no problems whatsoever woth BT.
Peter
Click to expand...
Click to collapse
I have the same problem since updating. If I leave BT off for some time (hours?) and then try to reenable it I am told there is no bluetooth hardware. After a soft reset everything is ok.
Gonna call Brightpoint tomorrow.
thx.. guys... I even reflashed it to if it got bad under the upgrade... I will also call in the problem tomorrow... not to brightpoint.. as my was imported and uses Dangaard Telecom Swedens ver of the upgrade... same bug in both BT software...
Carlis
bamse said:
cpes said:
Well, I have the same problem. After updating with the new ROM-file my Qtek says: There is no BT hardware on this device. Strange!! Something wrong in the new ROM-file?
Before updating I had no problems whatsoever woth BT.
Peter
Click to expand...
Click to collapse
I have the same problem since updating. If I leave BT off for some time (hours?) and then try to reenable it I am told there is no bluetooth hardware. After a soft reset everything is ok.
Gonna call Brightpoint tomorrow.
Click to expand...
Click to collapse
Sent a mail to Swe Qtek support about it.. let U know what they say..
Carlis
I have the same problem..
I also have this problem (sometimes working, sometimes not working after soft reset), and also have Calendar+ 2.2.3 installed, now I removed it, let's see if it will happen again.
A way to get pass the new BT patch..
Hardreset
Softreset when Unit says its done after Screen align and timezone etc.... before the ExtRom load.
Install all cabs in the now visible External Rom folder exept the one named:
Default_Patch_bthusb.CAB .
You now have the old BT and all other is updated.
Or ..
Live with the new BT patch and do like this:
Start BT.. activate ... and unactivate .. shut down BT settings.
Start it and now it can be activated.
Works 90% for me.
Carlis
Carlis:
I don't really understand what you are saying..
After upgrading (Dangaard update) I get the Error: "There is no Bluetooth hardware installed on this device." - as soon as I click the bottom icon in today-screen. Same if I try Bluetooth icon in Settings -> Connections -> Bluetooth.
How do I ;
"Start BT.. activate ... and unactivate .. shut down BT settings.
Start it and now it can be activated. "
?
All help is very appreciated!
5 soft-resets later and my BT-module is working again. Strange ****.
Same thing here sometimes...
Hi everyone,
my Austrian T-Mobile MDA compact (original firmware, no "cross-update" or whatever) also has this problem sometimes. There where some resets too, when switching on the device after using a BT headset (turned BT on -> connected BT headset -> made call -> endet call -> switched MDA off, while headset was still on -> switched MDA on -> imediate "auto-softreset"). By now I haven't realised, what's the reason for it, but I will take care.
My guess at this moment: Something's wrong with handling of bluetooth headset connections or/and suspend handling.
I'm really asking myself who the f*ck is responsible for the fact, this beautiful little device is stuck with this crappy MS bluetooth stack (missing profiles, buggy like hell, etc.)...
I got tired with the bug and now I leave my BT on 24/7. My old habits of keeping my phone charged makes this ok for me.
I occasionally got this bug both before and after the upgrade to 1.06.
I simply switch off the power and on again. The bluetooth is the back. It works every time for me.
In setting.. U have 2 BT settings.. one for PORTS and one for manage devices and turning bt on and off.
activate a bt inbound port or outbound port under settings... system .. bluetooth settings.. to get bt back..
I now use Bluetooth switch by buzz_lightyear to manage the bt.. ,no more bt hardware error
Love this little soft.. Thank U Buzz.. !!!
Its even a huge + to use it .. soooo easy to enable and disable bt.. both in discover and hidden mode..
It can be found in the forum.. Even using hes replacing BT icons.. realy well looking..
Thx again Buzz..
pell0 said:
Carlis:
I don't really understand what you are saying..
After upgrading (Dangaard update) I get the Error: "There is no Bluetooth hardware installed on this device." - as soon as I click the bottom icon in today-screen. Same if I try Bluetooth icon in Settings -> Connections -> Bluetooth.
How do I ;
"Start BT.. activate ... and unactivate .. shut down BT settings.
Start it and now it can be activated. "
?
All help is very appreciated!
Click to expand...
Click to collapse
Is there a fix?
hey all,
I get this intermittant problem too... probably because I leave bluetooth off 95% of the time.
My XDA 11 is running ROm 1.60.00WWE, with ExtROM version 1.60.44
Soft resets seem to make little difference.
Does anyone have a easy and comprehsible solution to restore the 'missing' Bluetooth hardware?
Thanks
tym
Hi guys I got the Arc and absolutely loving it..but got a small problem..I cannot connect the bluetooth headset the phone does not find it..The 1st time it was connected to a N95 and worked fine..Now I have unpaired form the 95 but still the arc does not find it when searched..Any solution..
Thanks
Which bluwtooth headset is it?
its the standard one i got with the phone...The one that you got to plug in ur headset..So its not like wireless..
blueblood619 said:
its the standard one i got with the phone...The one that you got to plug in ur headset..So its not like wireless..
Click to expand...
Click to collapse
Plug into headset? And you call Bluetooth? Wireless?
Can you tell us the model?
Oh, my......
prathaban said:
Plug into headset? And you call Bluetooth? Wireless?
Can you tell us the model?
Click to expand...
Click to collapse
Sorry about the confusion guys..Even I dont know y they call it bluetooth headset..But still you got to connect via bluetooth...
The model is MW 600
My mw600 connects fine. You have got the headset on the phone option and not radio, havent you?
Sent from my LT15i using XDA App
IntMD said:
My mw600 connects fine. You have got the headset on the phone option and not radio, havent you?
Sent from my LT15i using XDA App
Click to expand...
Click to collapse
Yeah it is for the phone option...I connected it to a N95 first could that be the reason?? is there a way to reset?
you got to just search in the bluetooth option in settings right??
Still got the problem..
I think the issue is due to the lack of knowledge on how to "pair" the headset with the phone.
@OP, you have to press the power button and hold it until you see two arrows circulating.. then you will be able to pair with the phone.
Try reading the manual for better understanding
prathaban said:
I think the issue is due to the lack of knowledge on how to "pair" the headset with the phone.
@OP, you have to press the power button and hold it until you see two arrows circulating.. then you will be able to pair with the phone.
Try reading the manual for better understanding
Click to expand...
Click to collapse
You are a life saver..
blueblood619 said:
You are a life saver..
Click to expand...
Click to collapse
Oh really . Great to know your issue is fixed.
Hi All,
Since updating my Note to the stock LPY ICS from stock GB, I have found that the bluetooth no longer automatically connects to my Car stereo to use it as a bluetooth headset.
Looking in the settings, the option for automatically connecting seems to have gone!
Has anyone else found similar issues or a fix?
Steve
Hi Steve,
Go to Bluetooth settings and Click on Scan for Devices and Do your Pairing Again.
Please reply if this doesnt work. It worked for me.
prabhu1980 said:
Hi Steve,
Go to Bluetooth settings and Click on Scan for Devices and Do your Pairing Again.
Please reply if this doesnt work. It worked for me.
Click to expand...
Click to collapse
Thanks, I'll give that a go tonight and let you know how it goes!
Yes you have to pair the device's again then you should be golden!
Sent from my GT-N7000 using xda premium
Yep, thanks all - Repiaring the devices worked! I first re-piared it after the upgrade, but then it stopped working but doing it again seems to have fixed it!
Steve
Here the bluetooth disconnects, never pairs automatically (it does manually). Still a bit buggy...
Hello I have bought me qc 35 and the Bluetooth connection from my oneplus 5 disconnects and automarically connects. And so there are sound cuts.
RichardSauer said:
Hello I have bought me qc 35 and the Bluetooth connection from my oneplus 5 disconnects and automarically connects. And so there are sound cuts.
Click to expand...
Click to collapse
Should not be a oneplus 5 problem. Have you tried developer options to change Bluetooth related sound options?
My TaoTronics 35€ headset works pretty well, top sound
Even with the latest beta and stable updates the Bluetooth disconnect issues are wiped out.
I run on the xxx
RichardSauer said:
I run on the xxx
Click to expand...
Click to collapse
Yeah, but which version? And have you always selected to update the firmware too?
strongst said:
Yeah, but which version? And have you always selected to update the firmware too?
Click to expand...
Click to collapse
I have found the cause. Thx anyway.
RichardSauer said:
I have found the cause. Thx anyway.
Click to expand...
Click to collapse
Please tell us what the problem was for you and how you solved it.
Help other people too, not only one way :good:
You also ask here https://forum.xda-developers.com/oneplus-5/help/bose-qc-35-oneplus-5-bluetooth-similar-t3637068
strongst said:
Please tell us what the problem was for you and how you solved it.
Help other people too, not only one way :good:
You also ask here https://forum.xda-developers.com/oneplus-5/help/bose-qc-35-oneplus-5-bluetooth-similar-t3637068
Click to expand...
Click to collapse
I hate when people do that.
Yeah sorry I write at the evening a had no time.
The problem was that the bluetooth connection disconnects and connects and the solution was to not doze the bose connect App.
No I was wrong it was not solved through this
Im on xxx rom should I try to go back to stock. Or this would Not change it because xxx based in stock
RichardSauer said:
Im on xxx rom should I try to go back to stock. Or this would Not change it because xxx based in stock
Click to expand...
Click to collapse
Don't know what mods you selected in aroma installer, but there's no general Bluetooth problem in this rom regardless of version, that's fact.
And I really don't know why this headset needs an app to work properly or didn't it?
My headset, as said before, doesn't need one and is working flawlessly.
Wow It must be a erorr at the phone because I have written with bose and there sent me a new pair. The sam erorr.
I downgraded to 7.1.1 and now it work.
I had a similar problem when running batON. uninstalling that fixed it for me, so maybe check any apps that communicate with devices connected over bluetooth
ts10 android head unit. I connect my iPhone over carplay with tlink, everything is working fine except when I get a call, I cant get to hear anything, but the caller can hear me. It only work when I connect the phone trought the bluetooth app. Does...
rehantahir32 said:
ts10 android head unit. I connect my iPhone over carplay with tlink, everything is working fine except when I get a call, I cant get to hear anything, but the caller can hear me. It only work when I connect the phone trought the bluetooth app. Does...
Click to expand...
Click to collapse
I am having the same problem. Did you find any solution?
Anantm5 said:
I am having the same problem. Did you find any solution?
Click to expand...
Click to collapse
No
Hi, I am also facing same issue, if I connect bluetooth manually then Apple CarPlay doesn't play music.
Finally after trying lot of switch on/off found the solution. In my system there is CAR SETTINGS option in this I turned on "force to small speaker". Now I can hear all calls on Carplay only disadvantage it is using one small speaker of car.
ravimahendru said:
Finally after trying lot of switch on/off found the solution. In my system there is CAR SETTINGS option in this I turned on "force to small speaker". Now I can hear all calls on Carplay only disadvantage it is using one small speaker of car.
Click to expand...
Click to collapse
I finally got it working. Simply remove the t-link app from navigation default app in the settings.
Anantm5 said:
I finally got it working. Simply remove the t-link app from navigation default app in the settings.
Click to expand...
Click to collapse
This message saved my life lol.. been trying to figure out what was the issue. thanks!!
Anantm5 said:
I finally got it working. Simply remove the t-link app from navigation default app in the settings.
Click to expand...
Click to collapse
hi, i had the same problem with ts10 unit, i was going crazy, i wanted to throw it all away, but thanks to the valuable tip, now audio call works ... i hope it lasts... thanks, thanks, thanks
Thanks mate i was facing the same issue and just got it solved
I recently installed my 10.2 with Android 11-PX6. Looks like everything is up to date but having a similar issue with calls not coming through CarPlay (Zlink). Does anybody have some advice?
ravimahendru said:
Finally after trying lot of switch on/off found the solution. In my system there is CAR SETTINGS option in this I turned on "force to small speaker". Now I can hear all calls on Carplay only disadvantage it is using one small speaker of car.
Click to expand...
Click to collapse
Hello, can you tell us the path to get to "force to small speaker"? Thanks
tchallawilliams said:
This message saved my life lol.. been trying to figure out what was the issue. thanks!!
Click to expand...
Click to collapse
Hi can you please show how this setting is accessed i tried looking for it but dont seem to find it anywhere.
Anantm5 said:
I finally got it working. Simply remove the t-link app from navigation default app in the settings.
Click to expand...
Click to collapse
Hi can you please show how this setting is accessed i tried looking for it but dont seem to find it anywhere.