My phone is LeEco Le 2 x620.
It has been bricked after fastboot reboot command. The phone shows red light only and still connecting/disconnecting every time I connect it to my PC.
After searching, I found that there is a way to unbrick it using SP Flash Tool.
I downloaded everything needed such as the SP Flash Tool, the firmware, the MediaTec Driver installer....
The problem is that I am facing problems that SP Flash Tool is not recognising my device. Showing errors such as ERROR: STATUS_BROM_CMD_STARTCMD_FAIL, and BROM_ERROR: STATUS_ERR.
Please help me, am about to lose everything!!
a7madhazim said:
My phone is LeEco Le 2 x620.
It has been bricked after fastboot reboot command. The phone shows red light only and still connecting/disconnecting every time I connect it to my PC.
After searching, I found that there is a way to unbrick it using SP Flash Tool.
I downloaded everything needed such as the SP Flash Tool, the firmware, the MediaTec Driver installer....
The problem is that I am facing problems that SP Flash Tool is not recognising my device. Showing errors such as ERROR: STATUS_BROM_CMD_STARTCMD_FAIL, and BROM_ERROR: STATUS_ERR.
Please help me, am about to lose everything!!
Click to expand...
Click to collapse
you need choose secureboot /DA_PL_HIGH.bin at download Agent. when flash at sp tools.
tony770101 said:
you need choose secureboot /DA_PL_HIGH.bin at download Agent. when flash at sp tools.
Click to expand...
Click to collapse
Try the firmware, it will help you unbrick your phone.
https://www.needrom.com/download/le...ulitilanguages-rom-unbrick-firmware-sp-tools/
Related
i'm not experienced with such things
i gained some knowledge from googling the last few days
i have access to Fastboot ADB and CWM recovery
it started when i tried to flash the rom but it stopped on 35% on the yellow bar on SP Flash
i tried more than 2 cables , 5 different SP flash tools versions
also tried to
adb push
fastboot flash
but always failure
the device was not rooted and i think this is the dead end point :crying:
is there a way to root it using ADB -CWM-Fastboot ?!
is there any more tries i take ?!
BTW also IMEI Shows nothing on MT Droid Tool
thanks in advance
same issue to me
first make a backup from your IMEI then try to format your device (except bl) using flahtool format whole flash feature
Red-code said:
first make a backup from your IMEI then try to format your device (except bl) using flahtool format whole flash feature
Click to expand...
Click to collapse
How to backup from imei? Just try many pc and cable still cant flash. Brom error. Any solution?
Hi,
i tried to flash the marshmallow update and accidently erased all the data using twrp. now my mobile is showing no os in twrp and it is not booting.
1. tried to unlock bootloader using fastboot. failed.
2. tried to flash custom rom . failed because bootloader not unlocked.
now i am having only twrp. can anyone help me in this , its really urgent.
thanks.
Do u have any custom rom for pixel v1?
i cant find any custom rom
hi i searched all over the internet but i cant find any custom rom. Can anyone pls give me the link for any custom rom for lava pixel v1.
Thanks
flash the stock firmware with sp flash tool
s015,s019 are for white model & s103 is for gold model .
http://firmwarefile.com/lava-pixel-v1
flashtool not detecting my mobile
AC DC said:
flash the stock firmware with sp flash tool
s015,s019 are for white model & s103 is for gold model .
http://firmwarefile.com/lava-pixel-v1
Click to expand...
Click to collapse
sp flashtool is not detecting my device and in sp flashtool the download is not starting. but fastboot can detect my device.
Importatn: my device has no OS, and my bootloader is locked.
pmkscorpio said:
sp flashtool is not detecting my device and in sp flashtool the download is not starting. but fastboot can detect my device.
Importatn: my device has no OS, and my bootloader is locked.
Click to expand...
Click to collapse
but if you have twrp you can directly install the zip from sdcard
thread link
AC DC said:
but if you have twrp you can directly install the zip from sdcard ,check this thread
Click to expand...
Click to collapse
where is the thread link?
pmkscorpio said:
where is the thread link?
Click to expand...
Click to collapse
http://forum.xda-developers.com/lav...-to-upgrade-to-marshmallow-bypassing-t3315319
Issue
AC DC said:
http://forum.xda-developers.com/lav...-to-upgrade-to-marshmallow-bypassing-t3315319
Click to expand...
Click to collapse
I used SP tool to flash the firmware (Link given by @AC_DC in another thread).
When I select the option 'firmware upgrade' it says error proinfo: Failed to get PMT info. The it says 'select option to format and download'. After doing that, after the 'download OK' popup, I try to boot up the phone and nothing. It isn't booting up. (white variant of pixel v1)
My phone is literally dead, only the preloader is working. I also tried formatting and then trying it again, but nothing works.
Please direct me to what I should do now. Any help highly appreciated :good:
First search in google unlock bootloader
Hello your problem is solve.....?
This method is legit and works 100%
Hey all
U said that u still have TWRP. So go to recovery, clear data, and in clear system partitions, select everything and clear.
Then follow the following steps -
1) Turn off yr V1 and get it into fastboot mode and connect it to yr PC( make sure u've adb installed. Link - https://androiddatahost.com/bnjkh)
2) download : https://firmwarefile.com/lava-pixel-v1. Place the 'boot' and 'system' files from the downloaded firmware to the folder where u have adb installed.
3) Open CMD( A .exe called 'cmd here' is already present in the file of adb, so run it as administrator)
4) Type -
Code:
fastboot flash boot boot.img
. Give it some time.
5) Type -
Code:
fastboot flash system system.img
. Give it time (It takes 4-5mins, so dont panic)
6) Type -
Code:
fastboot reboot
THIS METHOD WORKED FOR ME MANY TIMES.
If it helped you, click the :good: thanks button
Hello all..
I've struggled almost a week to unbrick my yureka AO5510. I can able get into bootloader mode by using sd boot method. Also i can able to get into Qualcomm HS USB QDLOADER 9008 by shorting board pins.
But in but in bootloader mode after flash_all.bat done successfully device remains same. No boot. In 9008 mode Sahara protocol error. Couldn't flash.
Finally Here is the solution and cause..
Cause : Corrupted radio modem in bootloader (or something related to boot)
Solution:
Get into bootloader mode using this method https://www.youtube.com/watch?v=TooHuDpKyzA ...
(If you can't get into bootloader mode using this method then nothing helps, i've tried even flashing my device using JTAG boxes)
As per video instructions even after flash_all.bat done if yureka remains bricked here comes the solution.
Download flash_radio.bat(zipped) from link below. Place it in stock firmware folder and run. After everything done successfully Run fastboot -i 0x1ebf reboot
Voila.. you got your device back
This is my first thread. Forgive me if anything uncompleted.
Shiva
View attachment flash-radio.zip
Someone please revert back with results.. i've spent many hours in this.. i can really help you i believe to bring your bricked device back...
yureka hardbrick
I did use your solution and results are very good.but I have a problem Touch not working properly after locking screen. If u tell me how to format bootloader of yureka and flash a very fresh ROM in it.
himan1995 said:
I did use your solution and results are very good.but I have a problem Touch not working properly after locking screen. If u tell me how to format bootloader of yureka and flash a very fresh ROM in it.
Click to expand...
Click to collapse
You dont have to format whole eMMc bootloader. just flash the rom either using fastboot mode or custom recoveries.
xboxxtech said:
You dont have to format whole eMMc bootloader. just flash the rom either using fastboot mode or custom recoveries.
Click to expand...
Click to collapse
I flash yureka plus ROM in yureka via fastboot and causes of that when I get back to my stock.my mobile touch screen work perfectly until I lock mobile screen.
himan1995 said:
I flash yureka plus ROM in yureka via fastboot and causes of that when I get back to my stock.my mobile touch screen work perfectly until I lock mobile screen.
Click to expand...
Click to collapse
Try [Tool] [OFFICIAL] UN-brick yureka device using Annabathina tool V1.0 avilable in XDA.
xboxxtech said:
Try [Tool] [OFFICIAL] UN-brick yureka device using Annabathina tool V1.0 avilable in XDA.
Click to expand...
Click to collapse
I will try it . thanks for reply. Hope its works for me
Hello everyone,
trying installing twrp on my device, I bricked it...
Following some howtos I was not able te "restore" the phone....
I used sp flash tools but I think I made some serious mistakes.
First: "from sp flash tools" I downloaded to phone all partition from image recovery of a x620...
Second: I formatted everything.
Now I can to restart the phone in recovery mode (of leeco) but all images are mirrored and flipped... when I access via fastboot the phone is not unlocked...
Is there someone the can upload the whole image memory of this phone? So I can tray to flash it...
Any idea or suggestion will be very appreciated....
Thanks a lot
Alessio
AlessioArtini said:
Hello everyone,
trying installing twrp on my device, I bricked it...
Following some howtos I was not able te "restore" the phone....
I used sp flash tools but I think I made some serious mistakes.
First: "from sp flash tools" I downloaded to phone all partition from image recovery of a x620...
Second: I formatted everything.
Now I can to restart the phone in recovery mode (of leeco) but all images are mirrored and flipped... when I access via fastboot the phone is not unlocked...
Is there someone the can upload the whole image memory of this phone? So I can tray to flash it...
Any idea or suggestion will be very appreciated....
Thanks a lot
Alessio
Click to expand...
Click to collapse
Stock Rom for LeTv LeEco Le S3 X626 with MT6797 Helio X20 processor:
http://geekbuying.mediafire.com/file/8kn6hf06f17hlob/171006-Letv2_LeEco_Le_-X626-5.8.018S-6.0.1.zip
Thanks a lot,
but now my device has bootloader locked and system doesn't boot up so I cannot use that tools for restore...
If you have the phone could you give me scatter file and full memory dump with sp flash tools?
May I try to restore from that...
AlessioArtini said:
Thanks a lot,
but now my device has bootloader locked and system doesn't boot up so I cannot use that tools for restore...
If you have the phone could you give me scatter file and full memory dump with sp flash tools?
May I try to restore from that...
Click to expand...
Click to collapse
Try this:
MT6797_Android_scatter: https://ufile.io/8hfbm
You don't need an unlocked bootloader to flash the stock firmware, SP Flash tools must detect your phone, put all the files you want to flash and click "Download", then conect the phone turned off to the PC, you can try pressing the Vol Up but it's not necessary. Once you listen a sound of PC detecting the phone SP Flash Tool should detect him as well.
If you encountered problems try this post: https://forum.xda-developers.com/le-2/help/bricked-le-s3-x626-flashing-twrp-power-t3715937
The scatter file i put here comes from that firmware.
Hope it helps.
mgelo said:
Stock Rom for LeTv LeEco Le S3 X626 with MT6797 Helio X20 processor:
http://geekbuying.mediafire.com/file/8kn6hf06f17hlob/171006-Letv2_LeEco_Le_-X626-5.8.018S-6.0.1.zip
Click to expand...
Click to collapse
mgelo said:
Try this:
MT6797_Android_scatter: https://ufile.io/8hfbm
You don't need an unlocked bootloader to flash the stock firmware, SP Flash tools must detect your phone, put all the files you want to flash and click "Download", then conect the phone turned off to the PC, you can try pressing the Vol Up but it's not necessary. Once you listen a sound of PC detecting the phone SP Flash Tool should detect him as well.
If you encountered problems try this post: https://forum.xda-developers.com/le-2/help/bricked-le-s3-x626-flashing-twrp-power-t3715937
The scatter file i put here comes from that firmware.
Hope it helps.
Click to expand...
Click to collapse
Thank you very much!
I'll try using your info....
AlessioArtini said:
Thank you very much!
I'll try using your info....
Click to expand...
Click to collapse
how about your phone ? if can not flash success ,you can contact me .
tony770101 said:
how about your phone ? if can not flash success ,you can contact me .
Click to expand...
Click to collapse
can u help me regarding my leeco x626? whenever i flash the stock rom it just cant go through then a brom error always appears
Hey guys,
I turned on my phone after years and I saw it's stuck on rescue mode with errors number 1 (security verify failed) & 10 (boot image).
I was able to go to eRecovery and Fastboot only.
Wiping data and factory reset through eRecovery didn't fix the problem and also I couldn't flash the whole rom using dload mode.
Then I checked fastboot and found out the bootloader was locked. After doing my research, I unlocked the bootloader using PotatoNV and testpoint. Then I could only flash some images like boot, system, recovery & cust. Not other images. Problem remains. Then I used testpoint mode and I was able to flash most of the images like HIFI etc, but nothing changes yet
I also tried Huawei smartphone multi-download and IDTML but they fails too. tried to use SP Flash Tools but couldn't find compatible rom with it.
Its firmware is C185B572. I can flash this version images using fastboot only. Others go to prim vrl failure.
Also flashed TWRP for using that but can't go to it at all.
I don't know what to do anymore
Any help would be appreciated.
Decterox said:
I also tried Huawei smartphone multi-download and IDTML but they fails too. tried to use SP Flash Tools but couldn't find compatible rom with it.
Click to expand...
Click to collapse
Hello!
I’m having the same issue (I haven’t unlock the bootloader though) as you and sadly don’t have any solution yet.
However, what’s this "Huawei samrtphone multi-download" and "IDTML"?
I do have some (hopefully!) compatible ROM that I’m willing to try with SP Flash Tool.