Hey guys,
I turned on my phone after years and I saw it's stuck on rescue mode with errors number 1 (security verify failed) & 10 (boot image).
I was able to go to eRecovery and Fastboot only.
Wiping data and factory reset through eRecovery didn't fix the problem and also I couldn't flash the whole rom using dload mode.
Then I checked fastboot and found out the bootloader was locked. After doing my research, I unlocked the bootloader using PotatoNV and testpoint. Then I could only flash some images like boot, system, recovery & cust. Not other images. Problem remains. Then I used testpoint mode and I was able to flash most of the images like HIFI etc, but nothing changes yet
I also tried Huawei smartphone multi-download and IDTML but they fails too. tried to use SP Flash Tools but couldn't find compatible rom with it.
Its firmware is C185B572. I can flash this version images using fastboot only. Others go to prim vrl failure.
Also flashed TWRP for using that but can't go to it at all.
I don't know what to do anymore
Any help would be appreciated.
Decterox said:
I also tried Huawei smartphone multi-download and IDTML but they fails too. tried to use SP Flash Tools but couldn't find compatible rom with it.
Click to expand...
Click to collapse
Hello!
I’m having the same issue (I haven’t unlock the bootloader though) as you and sadly don’t have any solution yet.
However, what’s this "Huawei samrtphone multi-download" and "IDTML"?
I do have some (hopefully!) compatible ROM that I’m willing to try with SP Flash Tool.
Related
Hi everyone, i cant enter to EDL mode, i need it because my stock rom is unstable(All start with OTA update), after update it show me "unfortunately android.... has stopped " every 3-5 seconds. EDL works fine yesterday and i try to install fastboot rom, but since MiFlash get error when i install fastboot rom i cant reboot in EDL. Hope you can help me.
note: I try reboot trough fastboot and do same thing as the video.
youtube. com/watch?v=gPh1yE3or8g&feature=youtu. be
(Sorry for the video post, but i cant find something like this case in web and i really need help)
You can try load in fastboot, connect to pc and run edl.cmd from archive.
www28.zippyshare.com/v/sKankJGd/file.html
go to fastboot and type "Fastboot oem edl" then enter and you will find the device got into the EDL mode
Unlock your bootloader and flash a custom recovery is the best way
I have the same problem
Hi! I have the same problem! I can´t get to EDL mode, also I cant update with MiFlash anymore.
I´ve been searching for over a week for a solution but I can´t fix the phone.
I´ve done the following.
1. Bought the Redmi 3S phone from Gearbest, came with a rom with adware, I was unable to update the rom from the updater.
2. I downloaded an Official Fastboot ROM from the XIaomi website, then updated to latest version MIUI Official TeamVersion Stable ROM: V8.1.1.0.MALMIDI (MIUI8), without unlocking bootloader.
3. After succesfully updating the phone, Android starts but then I get a continuos error message and I cant do anything. Now I can only get to Fastboot Mode (EDL does not work anymore, even using Fastboot EDL mode). If I try to flash it again with Mi Flash I get Flash tz error.
4. I applied for unlocking, received the message after 48 hours but I am stuck on 50% with the error -current account is different from account info on the device xiaomi-
5. I am unable to update the firmware using fastboot mode, recovery mode or EDL mode, Unable to unlock the bootloader. Already tried several methods with no results.
Please help!
Thank you very much.
If your issue is just to go to EDL mode and get back Qualcomm 9008 port com why not to try the "cable trick" found for the redmi note3.
https://xiaomi.eu/community/threads...-edl-no-fastboot-no-logo-no-led-solved.34113/
See post n°22 and it is no risk to try it. The cable would be reusable.
You have also many other posts on the subject, just goole it.
Here's a really easy way to make a deep flash cable http://forum.xda-developers.com/xiaomi-redmi-3s/help/help-bricked-phone-t3510277/post70029683#post70029683
julianpaul said:
Here's a really easy way to make a deep flash cable http://forum.xda-developers.com/xiaomi-redmi-3s/help/help-bricked-phone-t3510277/post70029683#post70029683
Click to expand...
Click to collapse
Thanks! I will give it a try!
D3VI0US said:
go to fastboot and type "Fastboot oem edl" then enter and you will find the device got into the EDL mode
Click to expand...
Click to collapse
it reboots the device , unable to boot to edl mode
tetsumo said:
Hi! I have the same problem! I can´t get to EDL mode, also I cant update with MiFlash anymore.
I´ve been searching for over a week for a solution but I can´t fix the phone.
I´ve done the following.
1. Bought the Redmi 3S phone from Gearbest, came with a rom with adware, I was unable to update the rom from the updater.
2. I downloaded an Official Fastboot ROM from the XIaomi website, then updated to latest version MIUI Official TeamVersion Stable ROM: V8.1.1.0.MALMIDI (MIUI8), without unlocking bootloader.
3. After succesfully updating the phone, Android starts but then I get a continuos error message and I cant do anything. Now I can only get to Fastboot Mode (EDL does not work anymore, even using Fastboot EDL mode). If I try to flash it again with Mi Flash I get Flash tz error.
4. I applied for unlocking, received the message after 48 hours but I am stuck on 50% with the error -current account is different from account info on the device xiaomi-
5. I am unable to update the firmware using fastboot mode, recovery mode or EDL mode, Unable to unlock the bootloader. Already tried several methods with no results.
Please help!
Thank you very much.
Click to expand...
Click to collapse
I got same problem.. But I'am not yet get permision to unlock bootloader.. Please help me.. What can i do to flash my redmi 3s..
I bought P8 lite (ALE-L21) and since I bought it, i could not connect to wifi.
When you go to WiFi, it says "Scanning" for a while, then stops. Not showing any network. The WiFi button is NOT gray.
I did factory reset - did not work.
But here is the strange thing:
I got in the Huawei eRecovery.
It offered to download the new version and recovery.
The phone tried connecting to wifi. Then it said Select WiFi, but did not show any access point (and it's sitting next to my router which is fine).
I took it to a service and the guy working there said that the hardware is fine. He was trying to fix it for a month playing with it and eventually I ran out of patience.
And finally, the question:
Can bootloader itself be replaced?
I have seen many threads regarding this, but none of them said anything about not being able to connect in recovery mode.
Thanks
Maybe you should try reflash rom by local update or unpack update.app file by huawei software extractor then extract cust.img and flash it.
already tried
kosmitchak said:
Maybe you should try reflash rom by local update or unpack update.app file by huawei software extractor then extract cust.img and flash it.
Click to expand...
Click to collapse
I already tried updating from SD card.
I have found instructions here http://www.stechguide.com/update-huawei-p8-lite-to-marshmallow/
Sorry if I am not suppose to do that.
But the interesting part is that WiFi is not operating BEFORE the kernel (bootloader comes before kernel, right?).
I did not know that it was even possible to run WiFi before android starts! However, in Huawei eRecovery, it tries to activate WiFi (to get updates or something), but does the same thing.
So, not android, nor bootloader see any access point.
That's very weird i'm 75% sure that cust partition is messed up. (When cust partition is wiped for some people RIL is not working, my friend wiped it and both wifi and ril didn't work, so he flashed cust.img via fastboot and after reboot it worked)
kosmitchak said:
That's very weird i'm 75% sure that cust partition is messed up. (When cust partition is wiped for some people RIL is not working, my friend wiped it and both wifi and ril didn't work, so he flashed cust.img via fastboot and after reboot it worked)
Click to expand...
Click to collapse
Can you please tell me (link me to the article) how to do that?
Does the bootloader need to be unlocked?
Do I need a custom recovery (like TWRP)?
Thanks for replies, man!
There are tons of threads regarding this and you are replying to me.
peter.not said:
Can you please tell me (link me to the article) how to do that?
Does the bootloader need to be unlocked?
Do I need a custom recovery (like TWRP)?
Thanks for replies, man!
There are tons of threads regarding this and you are replying to me.
Click to expand...
Click to collapse
Download firmware of your phone and use Huawei update extractor ( https://goo.gl/aSMU9M ) to extract cust.img.
Then flash it via fastboot.
P.s you need to unlock bootloader
Hello,
My Huawei P10 Lite is bricked (or not ...), but I can not boot the system.
After restoring a backup through TRWP, I always get the "Huawei eRecovery" screen and I can not start the android system. This screen should allow download a recovery but the connection always fails.
I am able to load *.img files throuth the fastboot, and with that I am able to load the TWRP recovery (if needed).
At this point the bootloader is locked, but I also have the unlock code. So it's not a problem.
After some research on the internet it seems that it is necessary to reinstall the stock recovery ... Is it the only way to recover the smartphone?
Does anyone have a stock recovery image?
Ideas?
My model is a WAS-LX1A (Portugal).
Thanks
Same here. same country, same model. Have you solved it?
Did you find by chance the recovery?
goetzchrist said:
Did you find by chance the recovery?
Click to expand...
Click to collapse
Hi, i recovered the phone flashing the recovery stock binary in RECOVERY and RECOVERY2.
merdecas said:
Hi, i recovered the phone flashing the recovery stock binary in RECOVERY and RECOVERY2.
Click to expand...
Click to collapse
can you guide us how?
Hi,
Enter in fastboot and execute the following commands:
fastboot flash recovery recovery.img
fastboot flash recovery2 recovery2.img
fastboot reboot
You can find the stock recovery in this link:
https://mega.nz/#!0NsEVRIb!DKSqqW5H4DQX7pcyACH4cFbKQS9K8Ov1BNnLfk4sSUs
Fixing Bricked P10 Lite without TWRP , This works even if your Boot is locked
Don't worry my friend be chill, I too bricked my huawei P10 Lite Middle East Version and after a month of struggle I was finally able to fix this issue and restored my STOCK .
This video is made to help you successfully fix your Bricked Huawei P10 Lite
Follow the below youtube video link clearly to unbrick your Huawei
If the above video doesn't play then click on thsi link below
https://youtu.be/0vDgDXePAR4
Cheers.....
help please
merdecas said:
Hello,
My Huawei P10 Lite is bricked (or not ...), but I can not boot the system.
After restoring a backup through TRWP, I always get the "Huawei eRecovery" screen and I can not start the android system. This screen should allow download a recovery but the connection always fails.
I am able to load *.img files throuth the fastboot, and with that I am able to load the TWRP recovery (if needed).
At this point the bootloader is locked, but I also have the unlock code. So it's not a problem.
After some research on the internet it seems that it is necessary to reinstall the stock recovery ... Is it the only way to recover the smartphone?
Does anyone have a stock recovery image?
Ideas?
My model is a WAS-LX1A (Portugal).
Thanks
Click to expand...
Click to collapse
same here , i relocked the bootloader and the mobile got stuck on the recovery mode .
please help , when i open the adb cmd with the mobile in recovery state , the adb can't see my device ,how did you load *.img files through the fastboot, guide me please
Hello everyone.
I Have Huawei P10 Lite WAS-LX1A and I accidentally bricked my device.
I was using TWRP to install a rom, and I wipped my system but the rom couldn't be installed for some reason. So I thought my TWRP Version had a problem, so I tried with bootloader to istall a new TWRP.
In adb I pressed:
fastboot flash recovery TWRP_by_GreatSlon.img
Click to expand...
Click to collapse
and then
fastboot flash recovery custom_boot_decryptdata_b130
Click to expand...
Click to collapse
But now, it doesn't load TWRP at all when I press vulume up + power button. I am stuck with out TWRP and with out an OS.
And I can't enter bootloader to install a new TWRP. Is there anything I can do?
I do have a laptop and an SD Card and my Bootloader is unlocked. Phone Unlocked and FRP Unlock are red, so maybe there is a way to save my phone please? I need help please . Sorry if I am not explaining very good and if I don't write correctly, I'ts because I am very very sad . Please someone tell me there is a way to fix it. Maybe dload? But I cannot find any file that it fits.. Thanks in advance.
I found this youtu.be/pkWSDlrLmns and I intalled a new TWRP. But I still cannot find any ROM to install. Any help please?
tobelios said:
I found this youtu.be/pkWSDlrLmns and I intalled a new TWRP. But I still cannot find any ROM to install. Any help please?
Click to expand...
Click to collapse
Try this.
tobelios said:
fastboot flash recovery TWRP_by_GreatSlon.img
and then
Quote:
fastboot flash recovery custom_boot_decryptdata_b130
Click to expand...
Click to collapse
you flashed twrp in recovery partition and after that, you flashed "custom_boot_decryptdata" also in recovery partition. so, twrp was overwritten. that's the reason why it doesn't work now. are you able to enter fastboot? (VOL- & power button)?
are you on emui5 or emui8?
if you can enter fastboot mode, flash twrp again.
Bricked P10 lite
My huawei p10 lite completely dead after mistakenly doing a wipeall from twrp. Now the screen doeant turn on , no logo, no vibrations, nothing. But the computer detects something(still no reaponse on phone) and when i typed fastboot devices in minimal adb it shows the list and the phone is listed in it. Please help.
Vrockpockey04 said:
My huawei p10 lite completely dead after mistakenly doing a wipeall from twrp. Now the screen doeant turn on , no logo, no vibrations, nothing. But the computer detects something(still no reaponse on phone) and when i typed fastboot devices in minimal adb it shows the list and the phone is listed in it. Please help.
Click to expand...
Click to collapse
Try to flash all partitions from a service rom.
I have the Same Problem. Only dark screen with fastboot connection.
(Sorry for the very late reply) I could enter fastboot using a pc, and then flashed a different twrp and costum rom.
Everything was okay. But, lately my rom started having network problems and I decided to flash an another rom..
But when I did, something wrong happened and now I am without twrp, without rom and with phone and frp locked.
My destiny is to brick my device and go to imposimple position, isn't it? I don't have my unlocked code so I cannot unlock my bootloader. I paid and tried dc unlocker to unlock my phone, but after plug-unplug it stopped being unlocked again and my money for dc unlocker gone for nothing and I am not willing to pay again for something like that. Any ideas to unlock my phone?
I sent an email and message to Huawei to see if they can give me the code, but idk if they will do. Any suggestions?
This post can be locked. This thread continues here. As for the Huawei, they respond that they don't give the unlock code anymore..
I was trying to flash modified recovery image using magisk after that my phone is dead almost.
My phone don't boot in to android. I can't charge my phone because I get message on the beginning
my system is moddifyed my phone shut down automatically after 5 seconds, also i can't unlock bootloader via fastboot i get information "unlock operation is not allowed" .
I have Leeco 650x with mtk helio x27.
I only flashed modified recovery in magisk after that I disabled usb debug and oem unclock. after restart my phone I can't unlock my bootloader and I can't continue bootup to android.All I need to do is restore somehow original recovery.
But how to do that without unlocked bootloader in my situation?
I try to flash new Rome using flash tool but I have error 0xC0030003
Is here any powerful person to solve the problem.
It looks like you flashed firmware for wrong device. Settings say x650 instead of x720 (I am assuming you have x720). I think your best bet is probably the QFIL restore.
https://www.google.com/amp/s/forum....to/guide-unbrick-le-pro3-tested-t3622340/amp/
If you do not have an x720, please disregard this post.
I have 650x with mtk processor 100 procent. I only flashed modified recovery in magisk after that I disabled usb debug and oem unclock. after restart my phone I can't unlock my bootloader and I can't continue bootup to android.All I need to do is restore somehow original recovery.
But how to do that without unlocked bootloader in my situation?
I try to flash new Rome using flash tool but I have error 0xC0030003
LucasNoob said:
I have 650x with mtk processor 100 procent. I only flashed modified recovery in magisk after that I disabled usb debug and oem unclock. after restart my phone I can't unlock my bootloader and I can't continue bootup to android.All I need to do is restore somehow original recovery.
But how to do that without unlocked bootloader in my situation?
I try to flash new Rome using flash tool but I have error 0xC0030003
Click to expand...
Click to collapse
You need to find the LETV X650 Scatter file. I do not know those phones very well. A X600 file may work, you will need to do a lot of research before attempting or you can damage your partitions.
Here is a link for the firmware. https://fapgem.com/video/4tnZoa0H9Q...-firmware-eui-5925s-install-via-fastboot.html
There is a chance that if you can get your PC to see the phone that you may be able to flash the stock firmware. It will not hurt to try it. Again , read extensively before doing anything.
There is a website called Android brick. They have an article on unbricking your phone but I could not access the link. Just Google, or use DuckDuck Go and search Letv X650 Scatter file unbrick.
I just now found this, which may be your solution: https://stephaniefulke.blogspot.com/2015/09/how-to-flash-unbrick-your-mediatek.html
Good luck