Database Users

Unlock Bootload , Install TWRP , Root : Redmi Note 3[Snapdragon] 7.2.3

Its been inspired by Sudeep Duhoon Thread , Thank him if possible . Except the rooting part everything is preety much same as Sudeep Duhoon did.
I just found out you could 7.2.3 much easily Root the device rather than editing scripts and all of the stuff which i didn't get from his thread.[No offense sir]
Downloads :
1. Minimal Adb Tool
2. MiFlash_2016.03.30.exe
3. Fastboot 7.2.3 Rom
4. Unlocked EMMC or check the attachment.
5. 7.2.3 PATCHED BOOT IMAGE
Unlocking Bootloader :
​1 . Connect your Phone to Computer in USB DEBUG and OEM UNLOCK mode to the computer. [Both of these settings are turned on from developer option.]
2. In ADB check if your device is successfully connected using "adb devices" command .
3. NOW , Reboot the phone into EDL mode using this command "adb reboot edl" .
4. Now make sure you're device is connected in "Qualccomm HS-USB QLoader 9008" , if yes continue .
If the device is connected in "Qualcomm HS-USB Diagnostics 900E" Start it from step 1 again.
5. DOWNLOAD 7.2.3 fastboot Rom . Extract the rom.
Download, Extract unlocked_emmc_appsboot.mbn. Rename it to "emmc_appsboot.mbn" And move it inside the extracted ROM FOLDER.
6. Now Start the MI Flash Tool and Browse to the Location Where you have Extracted the Fastboot ROM
7. Go to Advanced and Select:
Flash Programmer, Raw XML File and Patch XML File
from the Fastboot ROM\Images folder.
8. Close the window and click on refresh , Your device with certain COM# will appear. Just click on Flash.
Wait until its successful .
9. Once it is successful , Hard Boot your phone to fastboot using POWER DOWN + POWER ON buttons on your phone.
10. Now in command prompt type "fastboot oem device-info" , you'll see the DEVICE UNLOCKED : FALSE
11. Now Enter the following command "fastboot oem unlock-go" . Your device must be unlocked , to confirm enter the previous[step 9] command again.
YOUR BOOTLOADER IS UNLOCKED NOW
FLASHING TWRP :
​1. Move the twrp image in minimal adb folder. Rename the twrp image to twrp.img
2. Enter the command "fastboot flash recovery twrp.img"
TWRP HAS BEEN SUCCESSFULLY Installed.
P.S : To boot into twrp : volume up + power on . But it might take 2-3 tries to boot into TWRP . [ I don't yet know why this happens .]
ROOTING :
​1. Move SUPER SU and PATCHED BOOT IMAGE into your mobile.
2. Install Super Su.
3. Install Boot Image, Dont forget to select install image and boot partition while installing.
4. You've SUCCESFULLY ROOTED your device .
P.S : PLEASE TRY IT AT YOUR OWN RISK.

Emmc rar does not get extracted... I think the archive is corrupt... Please check onto that
Sent from my Redmi Note 3 using Tapatalk

kirkirehani93 said:
Emmc rar does not get extracted... I think the archive is corrupt... Please check onto that
Sent from my Redmi Note 3 using Tapatalk
Click to expand...
Click to collapse
rar file is just fine , anyway i have uploaded a zip file in the attachment . please check.

reply fast
if i m right... i have to put supersu and boot.img to phone fefore flashing twrp. bcoz after flashing twrp if i reboot to system, phone will not boot and may be bricked...plzzz reply

vivekjha said:
if i m right... i have to put supersu and boot.img to phone fefore flashing twrp. bcoz after flashing twrp if i reboot to system, phone will not boot and may be bricked...plzzz reply
Click to expand...
Click to collapse
No no. It doesn't matter when you put it in. And your after flashing twrp you can directly boot into TWRP and then move the files into mobile.
P.S : While in recovery , you can always copy files in to your mobile.

What if bootloader unlocked officially? Start from "Flashing TWRP" section?

any 1 tried this
any one tried this succesfully plzzz reply

Error during flashing with MiFlash
Got this error during Flashing process:
Status: Not enough storage space is available to process this command.(0x80070008; Max buffer sector is 256)
What should I do? My device does not boot...

anirudh281998 said:
Got this error during Flashing process:
Status: Not enough storage space is available to process this command.(0x80070008; Max buffer sector is 256)
What should I do? My device does not boot...
Click to expand...
Click to collapse
Use Windows 64bit edition.
The flashing process will fail in Windows 32bit edition

will this work in RN3 MTK ???

Will this work on 7.2.5 ?

RedBux said:
will this work in RN3 MTK ???
Click to expand...
Click to collapse
No

Thri11 said:
Use Windows 64bit edition.
The flashing process will fail in Windows 32bit edition
Click to expand...
Click to collapse
Thank you.....i tried it on windows 64 bit and it worked.

I tried unlocking bootload. I got this error "The system cannot find the path specified. (0x80070003: Open Programmer c:...)"
What have I done wrong?
Edit: I deleted the file. Extract it again. Then I unlocked bootloader successfully.

will this void warrenty ?
and to flash miui china roms we need to edit the fastboot everytime ?

When I flash supersu my device won;t boot. Boots fine before though

Hi, I'm on MIUI 7.5.3, can I use 7.2.3 ROM as provided to unlock bootloader or I have to find a 7.5.3 one?

GitGudWolf said:
Hi, I'm on MIUI 7.5.3, can I use 7.2.3 ROM as provided to unlock bootloader or I have to find a 7.5.3 one?
Click to expand...
Click to collapse
I too would like to know the same.
Would this work on 7.5.3 or will I need to do something else

not working sir....
when perform fastboot oem unlock-go, result:
...
FAILED (remote: oem unlock is not allowed)
finished. total time: 0.000s

UPDATE
SOLVED : "Enable OEM unlock" must be turn on in dev option.

P9 Lite Bricked. Help me!!!

Hello,
I was always a Samsung fanboy, but than I decided to buy the P9 lite (VNS-L21 single sim)
I wanted to flash the android 7 update for my phone, but I was such a noob in Huawei, that I didn't understand a word. But i tried to do what the instructions said. Now my phone is bricked. I can go to recovery, erecovery (which can't download anyithing) and download mode. I heard of this fastboot stuff as well, but I don't know how to do this. I tried to flash as many roms as I could with dload and it didn't work, after 5%, it said it failed... Now I don't know what to do. I think somebody (expert) should make a clear tutorial for noobs. Oh and I almost forgot that i don't have root, custom recovery, and things like that. I just bought the phone, I didn't want to make big changes, just new android. Is it possible that after this Huawei would fix my phone, if I couldn't? Or warranty is void? And sadly I don't know more of my phone because I'm not ina rom, and the phone and papers don't say more.
If you could help me, I would appreciate it:
Raul

Turn off your phone, connect to the pc while holding the volume down button, you will end up in fastboot mode.
I assume you have ADB and drivers installed (if not, install ADB and device drivers).
Optional: unlock your bootloader if it's locked.
Download the latest offical rom zip for your phone version (the marshmallow one), extract the update.app.
Use Huawei extractor to ectract the following files (google is your friend in this one, but its not difficult):
boot.img
recovery.img
cust.img
system.img
After you've done this, connect your phone to the PC in fastboot mode .
Open a command promt from the folder where the extracted files are (shift+right click, Open Command window here), enter the following commands
fastboot devices (you will see the list of attached devices with a lot of random number + fastboot)
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash cust cust.img
fastboot flash system system.img
fastboot reboot
After all this, you should be good to go, just be sure you are using the correct rom for you version.
Or you can just serach on the forum and find this.
https://forum.xda-developers.com/huawei-p9lite/help/unbricking-vns-l21-vns-l31-tutorial-t3583400
(Sorry for my english.)

Fastboot says that it has failed command not alllowed, after I want to installl the files. And I couldn't unlock bootloader without phones information...

rr999999 said:
I would happily unlock my bootloader, but I don't know anyithing about my phone (except model...) without the os...
Click to expand...
Click to collapse
Post here IMEI and SN from the box of phone and i can try get your bootloader unlock code...

If I would unlock it, would fastboot work? Because fastboot pc app recognizes my phone, but my phone says in fastboot mode, that I should connect itself to pc and open hisuite. WTF?

rr999999 said:
If I would unlock it, would fastboot work? Because fastboot pc app recognizes my phone, but my phone says in fastboot mode, that I should connect itself to pc and open hisuite. WTF?
Click to expand...
Click to collapse
Until you have bootloader unlock you can not run any fastboot flash command...

rr999999 said:
If I would unlock it, would fastboot work? Because fastboot pc app recognizes my phone, but my phone says in fastboot mode, that I should connect itself to pc and open hisuite. WTF?
Click to expand...
Click to collapse
Heyho,
normally yes, after bootloader unlock u are able to flash via fastboot. But...
I tried to flash as many roms as I could with dload and it didn't work, after 5%, it said it failed...
Click to expand...
Click to collapse
What is the error? - Have u disconnected the device from the PC during the update?
If not, try to update again and just disconnect the device from any USB connection...
Regards,
Sebastian

k1ll3r8e said:
Heyho,
normally yes, after bootloader unlock u are able to flash via fastboot. But...
What is the error? - Have u disconnected the device from the PC during the update?
If not, try to update again and just disconnect the device from any USB connection...
Regards,
Sebastian
Click to expand...
Click to collapse
Hello. I disconnected it from everything (for example USB)When I tried to install it said something like incompatibility version, but it couldn't be because I tried many roms for my phone. And I tried some dual sim roms as well because, I thought that it might work... But then I will do that unlock if it will do good. Thanks for the help Without bootloader I can't flash from dload as well?

rr999999 said:
Hello. I disconnected it from everything (for example USB)When I tried to install it said something like incompatibility version, but it couldn't be because I tried many roms for my phone. And I tried some dual sim roms as well because, I thought that it might work... But then I will do that unlock if it will do good. Thanks for the help Without bootloader I can't flash from dload as well?
Click to expand...
Click to collapse
Heyho,
the dload method works always without unlock bootloader. But, u can't flash for example an B161 over an B3xx (what nougat is) if the update u installed modified already the oeminfo u are not able to flash any rom below B3xx (nougat) via dload.
-
In that case u might use the official rollback package (never tested it myself) or, u unlock ur bootloader, flash a TWRP recovery matching to ur current FW. Flash from there a oeminfo + custom.bin (lower than B3xx) and flash the FW matching to the new oeminfo via dload and stock recovery.
Regards,
Sebastian

If you have custom recovery, wipe everything. Data, system, boot. extract update app (which is your stock rom) with huawei update extractor. go to custom recovery, flash stock boot IMG and stock recovery IMG. Power off, use three button dload method, reboot, when booting press vol up for three second, now you are in e-recovery. Press shutdown. Press and hold power and vol up for stock recovery. Do factory reset. If need do the factory reset 2/3 times. Now you are with locked bootloader.
Sent from my NEM-L21 using Tapatalk[/QUOTE]
Sent from my NEM-L21 using Tapatalk

Android 7.1.1 Doogee X5PRO

I have searched, found and tested this rom.
It is a beta but it works very well, I leave the links of the original web where all the information of download and installation is.
I hope this humble contribution helps you.
web : http://getbest.ru/doogee_x5pro_nougat_beta.htm
TWRP : https://drive.google.com/file/d/0B3nYb3vN0P9VakpJWVU1Unh1NGc/view?usp=sharing
Flash Tool Firmware x32 : https://drive.google.com/file/d/0B3nYb3vN0P9VVGZvZlVIeEdQcG8/view?usp=sharing
Flash Tool Firmware x64 : https://drive.google.com/file/d/0B3nYb3vN0P9VVGZvZlVIeEdQcG8/view?usp=sharing
Super SU : https://s3-us-west-2.amazonaws.com/supersu/download/zip/SuperSU-v2.79-201612051815.zip

Hi, and thank you, I already had downloaded the BETA3 version from needROM.com but it seems this is updgraded
---------- Post added at 06:35 PM ---------- Previous post was at 06:33 PM ----------
Just a question, I have to use the Flashtool to flash the firmware and after that the TWRP and Supersu options?

I've been using beta4 (and beta3 previously) for months and quite like them. Also, since the original factory rom is filled with adaware, isn't as up-to-date with Android's security patches and doesn't pass SafetyNet, you're gaining a lot and not losing anything switching or rooting for that matter.
Though I still prefer magisk over rooting since it's more secure and more than enough for adaway.
juancarloscuba said:
Just a question, I have to use the Flashtool to flash the firmware and after that the TWRP and Supersu options?
Click to expand...
Click to collapse
You can but you don't have to. I had a problem flashing beta4 and twrp at one go but booting the phone once with just beta4 and then powering off and flashing twrp and\or rooting afterwards solved that.
Btw, the dev is developing gesture modules for the kernel (built-in beta4) and an app to go with them: http://getbest.ru/kernel_gesture.htm I didn't find the feature useful enough to keep around but it works as advertised and, once again, magisk was enough.
Overall, the rom is an absolute must as far as I'm concerned and I wouldn't be using this phone if it wasn't available. It would have been nice if the dev could keepup with android's patches better but seeing how he's doing a better job than doogee and for free I can't really complain.

Do the camera and fingerprint work?

Hi. I wish to give my really thanks to the developer of this rom.
It solve my problems:
Stock rom R16:
sim card WIND (IT) poor 4G/LTE reception
sim card VODAFONE (IT) no 4G/LTE reception
(tested switching 1-2, various city zones)
This Rom:
both full 4G/LTE reception!!
M.A.

Hello Maria and thanks for your experience.
What can you say to me about the fingerprint and camera functionality?
Do they work fine on this rom?

****_ve said:
I have searched, found and tested this rom.
It is a beta but it works very well, I leave the links of the original web where all the information of download and installation is.
I hope this humble contribution helps you.
web : http://getbest.ru/doogee_x5pro_nougat_beta.htm
TWRP : https://drive.google.com/file/d/0B3nYb3vN0P9VakpJWVU1Unh1NGc/view?usp=sharing
Flash Tool Firmware x32 : https://drive.google.com/file/d/0B3nYb3vN0P9VVGZvZlVIeEdQcG8/view?usp=sharing
Flash Tool Firmware x64 : https://drive.google.com/file/d/0B3nYb3vN0P9VVGZvZlVIeEdQcG8/view?usp=sharing
Super SU : https://s3-us-west-2.amazonaws.com/supersu/download/zip/SuperSU-v2.79-201612051815.zip
Click to expand...
Click to collapse
Can you please assist me with flashing this ROM? (either 32bit or 64bit) - I've tried using the Flash Tool guide, but with 32bit the clean install scatter file does nothing, and with 64bit the clean install scatter file comes up with error: "chip type not match!! target efuse value: 0xa4020000"
I've tried with and without battery, I have installed Android USB driver, and I've followed this guide: https://androidmtk.com/flash-stock-rom-using-smart-phone-flash-tool
Please help!

The Seeker said:
Hello Maria and thanks for your experience.
What can you say to me about the fingerprint and camera functionality?
Do they work fine on this rom?
Click to expand...
Click to collapse
Hi.
My phone (X5pro) hasn't fingerprint reader.
The camera seems to work in normal way.
M.A.
P.S.: May be it depends by my phone, but sometimes touch is not reponsive; I have to push the power button ("stand-by") and push it again to have normal touch response.
---------- Post added at 07:24 PM ---------- Previous post was at 07:19 PM ----------
Racxie said:
Can you please assist me with flashing this ROM? (either 32bit or 64bit) - I've tried using the Flash Tool guide, but with 32bit the clean install scatter file does nothing, and with 64bit the clean install scatter file comes up with error: "chip type not match!! target efuse value: 0xa4020000"
I've tried with and without battery, I have installed Android USB driver, and I've followed this guide: https://androidmtk.com/flash-stock-rom-using-smart-phone-flash-tool
Please help!
Click to expand...
Click to collapse
The flash guide you linked is the right guide.
What exact model of phone you have?
Does the scatter and other files are in the same folder? (unzipped, you know).
Does the flashtool give any error message with the 32bit version?
Regards
M.A.

I tried both the 32bit and 64 bit versions of this rom, it's pretty good for a beta. However I had a problem with the screen going dark while using it and once the screen inverted colours randomly. Has anyone else had this problem with this rom? I'm currently using the android 6 stock rom but would love to get 7.1.1 working perfectly.

installed with SP flash tools x5pro-7.1-x32-BETA4 from a stock kernel 6.0 (R16)
with no luck. At booting snowcatPDA logo shows for a while and continuously reboots.
Flashed from ubuntu linux 16.04:
Download Only option (should I have choosen Firmware Upgrade?)
Scatter-loading File MT6735M_Android_scatter-WIPE-CLEAN_INSTALL.txt (should I have choosen MT6735M_Android_scatter.txt?)
I had the bootloader locked in development options (had it to be open?)
I also had USB debugging ON
Any tips?

xe7um said:
installed with SP flash tools x5pro-7.1-x32-BETA4 from a stock kernel 6.0 (R16)
with no luck. At booting snowcatPDA logo shows for a while and continuously reboots.
.....
Any tips?
Click to expand...
Click to collapse
Hi.
Now I'm at home.
Tomorrow morning, when I'll be at office I'll write down steps by steps I did.
(home... office..., reverse of natural manner, because I do all my mobile hobbies at lunch pause; at home PC is used by others )

Hello, here I am.
The follows are the steps, more or less, that I did.
(maybe you already did some of these)
1-Start from official R16 ROM
2- Developer option
#a. Enable USB debug​#b. Enable OEM unlock​
3- Security: allow unknown origin installation
4- Unlock bootloader
#a. Connect in fastboot, from ADB command mode:​type: adb reboot-bootloader ___ (Wait 1-3 second)​type: fastboot devices ___ (verify device is detected)​#b. verify bootloader unlock status​type: fastboot getvar all ___ and you get​= warranty: yes​= unlocked: no​#c. unlock bootloader​type: fastboot oem unlock ___ and you get​-> start unlock flow​---> on screen appear:​vol UP=Yes; void warranty, clear ALL data​vol DWN=no; no unlock​Press Vol UP​#d. verify bootloader unlock status​type: fastboot getvar all ___ and you get​= warranty: no​= unlocked: yes​#e. May be phone restart​
5- shut down phone ___ AND ___ get out battery
6- Flash phone with
MT6735M_Android_scatter-WIPE-CLEAN_INSTALL.txt​as per normal way (You know this , after some trying...)​
7- WITHOUT starting phone, ___ Flash TWRP with
MT6735M_TWRPx32_scatter.txt (or the 64, according to the ROM you flashed)​
9- Put battery in ___ AND___ start in TWRP recovery
#a. hold Vol Up, press ON button until appear a micro menu, release buttons​#b. choose recovery with Vol Up and confirm with Vol Down​
10- in recovery, choose wipe, and on bottom of the screen slide for factory reset
11- on TWRP main, choose reboot, power off
12- get out battery for some seconds
13- get in battery and start up (It can take a lot, may be leave the phone connected to main)
This is what I did (if I remember all the single steps...)
Try and report to us.
M.A.

Nope!, in step 9 when trying to start in TWRP recovery I get a continuous bootloop showing SnowcatPDA logo

xe7um said:
Nope!, in step 9 when trying to start in TWRP recovery I get a continuous bootloop showing SnowcatPDA logo
Click to expand...
Click to collapse
Hummmm....
It seems won't go in recovery mode, I think.
Try this:
1- flash entire stock ROM
(may be take this ===http://www.doogee.cc/bbs/viewtopic.php?t=29=== just in case)
2- start phone normal, up to home screen (so the phone is as just brougt)
3- power off and try to enter stock Recovery
If it works (and your bootloader is unloked) then try this
Connect phone to PC in fastboot
and enter
fastboot devices (I do this each time, just in case PC don't detect phone)
fastboot boot recovery.img
where recovery.img is your TWRP
The phone should start in TWRP recovery
The fastboot boot recovery.img command
send recovery (kernel?) image to temp phone folder/ram
and boot from that.
It unaffect normal rom/recovery.
By this step, we check If your phone accept this TWRP and sort out some possible troubles.
M.A.

when doing 'fastboot boot TWRP-3.1.1-X5PROx32.img' I get:
USB transferring...
USB transmission OK
and doesn't reboot into recovery but it boots normally
since I'm doing this from stock kernel R16 I wonder whether it's 32 or 64 bits
However I've found recovery-twrp-3.2.0-git-20171204.img that boots!. But I don't have scatter file, only .img! This recovery is from Lineage 14.1, but since this custom ROM installs from TWRP there is no need of scatter file

I've found another TWRP that boots with fastboot boot img: the TWRP recovery for 6.0 in needrom. This one has a scatter file

xe7um said:
I've found another TWRP that boots with fastboot boot img: https://www.needrom.com/wp-content/uploads/2016/12/TWRP_DG_X5Pro.rar
Click to expand...
Click to collapse
I get this error:
Needrom do not authorizing, the links referred by another website for download the ROMs.
The link must obligatory be clicked from of Needrom.com
Click to expand...
Click to collapse
Can you please link it correctly so we can download it?

The Seeker said:
I get this error:
Can you please link it correctly so we can download it?
Click to expand...
Click to collapse
Hi.
You have to select the file direct from the Needrom site.
www.needrom.com
(up)categories-doogee
on the right, click: Serial X
again, on the right, click: X5pro
and select the TWRP you desire.
(second line, second from left)
(click on "TWRP DG X5Pro (977 dls)")
Regards
M.A.
P.S.: even the link is
https://www.needrom.com/server/download.php?name=/2016/12/TWRP_DG_X5Pro.rar
you have to download from the site.

I'll try all this at the weekend, but my two cents are that it won't work. At first attempt I flashed BETA4 with MT6735M_Android_scatter-WIPE-CLEAN_INSTALL.txt (so no need to enter recovery and wipe cache/Dalvik) with a bootloop result.
My guess is that there are different ROM versions of X5 pro, and newest are incompatible with SnowcatPDA 7.1.1 firmware. Will see in a few days...

As I was suspecting I get a bootloop after logo. Now the question is: Is there a stable custom ROM (7.1 or newer) that I could use daily instead of MM 6.0 (R16) stock ROM?

Zui 3.1.117st qpst file for [z2131]/[z2132] Chinese [android N][qpst]

Download the latest stable Chinese rom qpst file for z2 plus which is qfil flashable.
i found these file on club.lenovo.com.cn after two days of searching. i have flashed it in my lenovo z2 plus and it is working very well. it can be flashed with the qfil or mi flash tool. Download the rom from the given link below and follow the steps to flash.
https://club.lenovo.com.cn/thread-4259783-1-1.html
or
http://s.bs.zui.com/E82d
Seps:-
1. Download the latest rom from the given link .
2. Extract it in the C drive within a folder having very simple name like 'new'.
3. Install the flashtool and other required drivers from the link below.
4. Boot the phone into EDL mode.
5.. Use qfil to flash the file in the phone.
[note:- all data will be wiped so be sure to take backup before flashing.]
To download and use the qfil and other drivers follow the link below
http://https://forum.xda-developers.com/lenovo-zuk-z2/how-to/how-to-recover-hard-bricked-zuk-z2-plus-t3576007.
HOW TO BOOT IS THE EDL MODE[9008 PORT]
follow the steps in the link.
For bricked phone(tricky).
https://forum.xda-developers.com/lenovo-zuk-z2/how-to/reboot-to-edl9008-modetotally-bricked-t3720932
If your phone is alive the follow these steps(easy method).
1. Enable developer option.
2. Enable usb debuging option.
3. Install latest adb driver from here.
4. Go to the directory where the adb driver is installed and inside the adb folder press shift and right click at the same time and then click on the option open command window here,
5. Type 'adb devices' these will pop a message in your phone accept it.now in the command window your device will be displayed.
6. Now type 'adb reboot edl' these command will reboot your device in the edl mode or 9008 port.
now every thing is wiped.
After first boot how to reach the home page and change the language of the phone.
just use the blue option at the top right corner of the screen and some common sense to reach the home screen.these will take you to the home screen every thing here is in the Chinese language so now we have to change it to English to do this follow the images.

Where is the rom link? and is flashing china rom (Z2131) on Indian device (Z2132) will help to relock the bootloader?

RajuMon said:
Where is the rom link? and is flashing china rom (Z2131) on Indian device (Z2132) will help to relock the bootloader?
Click to expand...
Click to collapse
It's a pretty old ROM now.
There is 3.5 QPST available. Even that too would receive official OTA builds as the latest for Z2 Plus is 4.0.xxx
Thanks.

Can I flash a Chinese rom in z2 plus and relock the bootloader?

RajuMon said:
Can I flash a Chinese rom in z2 plus and relock the bootloader?
Click to expand...
Click to collapse
Yes official Chinese room flashing can relock the bootloader

Thanks, mate this is the answer what I'm looking for:laugh:

I am using ARROW Os (pie), Now i want to get back to official stock rom with locked bootloader plox help me how to do so.
JUST now I HAVE FLASHED Lenovo_Z2_Z2132_Q01017.1_M_ZUI_2.0.093_ST_160811_QPST with QFIL and it is showing error ownload Fail:Sahara Fail:QSaharaServer Fail:The directory name is invalid. plz help me

hilarioustiwari said:
I am using ARROW Os (pie), Now i want to get back to official stock rom with locked bootloader plox help me how to do so.
JUST now I HAVE FLASHED Lenovo_Z2_Z2132_Q01017.1_M_ZUI_2.0.093_ST_160811_QPST with QFIL and it is showing error ownload Fail:Sahara Fail:QSaharaServer Fail:The directory name is invalid. plz help me
Click to expand...
Click to collapse
Do you connect your phone to 9008 port

phone dead(nothing is appear)

i m flash stock rom using cmd. and after flash complete phone continue restarting and nothing is appear.
nothing means nothing
but screen seems to wake but nothing appear
plz help
here is the link is i used for flashing
https://www.youtube.com/watch?v=AQgrzquizPY
help me

Download twrp flashable rom by avinash on xda...
Flash it via twrp...
Post your questions in qna section..
Not here

Are you able to go in twrp recovery?

Till which step did you reach? What waa the last message you saw on screen?
Charge it for a day, then press vol + button and power button and see if you can get to fast boot. Try plugging USB in and see if it's recognised, otherwise.

axit50 said:
Are you able to go in twrp recovery?
Click to expand...
Click to collapse
no i m not able to boot twrp display is blank
but sound is working with power button

nileshgarva said:
no i m not able to boot twrp display is blank
but sound is working with power button
Click to expand...
Click to collapse
Can you go to fastboot mode?

axit50 said:
Can you go to fastboot mode?
Click to expand...
Click to collapse
yes i able to fastboot mode and also command prompt fastboot devices shows my device
and i found one firmware for my device . is it correct(http://dlcdnet.asus.com/pub/ASUS/Ze...503.1214684087.1525078252-95537950.1525078252)
and behind my devices. made in Indonesia. written.
if you have correct firmware file name or link . please provide me.]
i also flashed fastboot firmware whick is from ( https://forum.xda-developers.com/as...ow-to/guide-revert-to-stock-rom-lock-t3798420 )
thank you

nileshgarva said:
yes i able to fastboot mode and also command prompt fastboot devices shows my device
and i found one firmware for my device . is it correct(http://dlcdnet.asus.com/pub/ASUS/Ze...03.1214684087.1525078252-95537950.1525078252)
and behind my devices. made in Indonesia. written.
if you have correct firmware file name or link . please provide me.]
i also flashed fastboot firmware whick is from ( https://forum.xda-developers.com/as...ow-to/guide-revert-to-stock-rom-lock-t3798420 )
thank you
Click to expand...
Click to collapse
From fastboot mode, install TWRP recovery first

Try alternate TWRP Recovery provided in this forum

nileshgarva said:
yes i able to fastboot mode and also command prompt fastboot devices shows my device
and i found one firmware for my device . is it correct(http://dlcdnet.asus.com/pub/ASUS/Ze...03.1214684087.1525078252-95537950.1525078252)
and behind my devices. made in Indonesia. written.
if you have correct firmware file name or link . please provide me.]
i also flashed fastboot firmware whick is from ( https://forum.xda-developers.com/as...ow-to/guide-revert-to-stock-rom-lock-t3798420 )
thank you
Click to expand...
Click to collapse
If you want to go on stock ROM with root.. I can give you the link but if you want to relock the bootloader.. then it's very lengthy process..

axit50 said:
If you want to go on stock ROM with root.. I can give you the link but if you want to relock the bootloader.. then it's very lengthy process..
Click to expand...
Click to collapse
The last link in his comment will give him stock rom with locked bootlkader via the fastboot method.
As the OP has already tried maybe his only option is the one you give him the link to

akshmau5 said:
The last link in his comment will give him stock rom with locked bootlkader via the fastboot method.
As the OP has already tried maybe his only option is the one you give him the link to
Click to expand...
Click to collapse
My link will give him stock rom but he has to flash it from twrp so I can't help him

drive.google:laugh:com/file/d/1FrDUoDaItrQPC6DiU6oRx1wOwY-SraUp/view?fbclid=IwAR38SHuQWyg2x7lfwbeBqvvpEm8QAcpke3gwqTMaxHICLkEULJHRpPcw9W8 (replace the emoticon with period)
That's the link for fastboot flashable rom v323. It will surely revive your max pro. (Credits to Nageen Pawar. Thanks sir)
Boot your phone into fastboot first. Connect it to your pc. Make sure you already installed adb drivers. Then extract the downloaded rom. And finally, run flash_all.

axit50 said:
My link will give him stock rom but he has to flash it from twrp so I can't help him
Click to expand...
Click to collapse
Why to flash twrp. Flash stock recovery via fastboot command. Download stock rom, put it in to internal storage. Now boot in to recovery. Update phone from there. This method will work.

Kumarvicky12 said:
Why to flash twrp. Flash stock recovery via fastboot command. Download stock rom, put it in to internal storage. Now boot in to recovery. Update phone from there. This method will work.
Click to expand...
Click to collapse
Because from TWRP he can flash stock ROM(modded) which may help him

axit50 said:
Because from TWRP he can flash stock ROM(modded) which may help him
Click to expand...
Click to collapse
From stock rom also he can make his phone alive/ working.

But from TWRP it's a better option to check.. because his phone is broken when he tried to unroot and reinstall stock rom

i too got same help me from that nothing is displaying and sounds were coming from that i too flashed the same rom help me to get out of this
...?