I have searched, found and tested this rom.
It is a beta but it works very well, I leave the links of the original web where all the information of download and installation is.
I hope this humble contribution helps you.
web : http://getbest.ru/doogee_x5pro_nougat_beta.htm
TWRP : https://drive.google.com/file/d/0B3nYb3vN0P9VakpJWVU1Unh1NGc/view?usp=sharing
Flash Tool Firmware x32 : https://drive.google.com/file/d/0B3nYb3vN0P9VVGZvZlVIeEdQcG8/view?usp=sharing
Flash Tool Firmware x64 : https://drive.google.com/file/d/0B3nYb3vN0P9VVGZvZlVIeEdQcG8/view?usp=sharing
Super SU : https://s3-us-west-2.amazonaws.com/supersu/download/zip/SuperSU-v2.79-201612051815.zip
Hi, and thank you, I already had downloaded the BETA3 version from needROM.com but it seems this is updgraded
---------- Post added at 06:35 PM ---------- Previous post was at 06:33 PM ----------
Just a question, I have to use the Flashtool to flash the firmware and after that the TWRP and Supersu options?
I've been using beta4 (and beta3 previously) for months and quite like them. Also, since the original factory rom is filled with adaware, isn't as up-to-date with Android's security patches and doesn't pass SafetyNet, you're gaining a lot and not losing anything switching or rooting for that matter.
Though I still prefer magisk over rooting since it's more secure and more than enough for adaway.
juancarloscuba said:
Just a question, I have to use the Flashtool to flash the firmware and after that the TWRP and Supersu options?
Click to expand...
Click to collapse
You can but you don't have to. I had a problem flashing beta4 and twrp at one go but booting the phone once with just beta4 and then powering off and flashing twrp and\or rooting afterwards solved that.
Btw, the dev is developing gesture modules for the kernel (built-in beta4) and an app to go with them: http://getbest.ru/kernel_gesture.htm I didn't find the feature useful enough to keep around but it works as advertised and, once again, magisk was enough.
Overall, the rom is an absolute must as far as I'm concerned and I wouldn't be using this phone if it wasn't available. It would have been nice if the dev could keepup with android's patches better but seeing how he's doing a better job than doogee and for free I can't really complain.
Do the camera and fingerprint work?
Hi. I wish to give my really thanks to the developer of this rom.
It solve my problems:
Stock rom R16:
sim card WIND (IT) poor 4G/LTE reception
sim card VODAFONE (IT) no 4G/LTE reception
(tested switching 1-2, various city zones)
This Rom:
both full 4G/LTE reception!!
M.A.
Hello Maria and thanks for your experience.
What can you say to me about the fingerprint and camera functionality?
Do they work fine on this rom?
****_ve said:
I have searched, found and tested this rom.
It is a beta but it works very well, I leave the links of the original web where all the information of download and installation is.
I hope this humble contribution helps you.
web : http://getbest.ru/doogee_x5pro_nougat_beta.htm
TWRP : https://drive.google.com/file/d/0B3nYb3vN0P9VakpJWVU1Unh1NGc/view?usp=sharing
Flash Tool Firmware x32 : https://drive.google.com/file/d/0B3nYb3vN0P9VVGZvZlVIeEdQcG8/view?usp=sharing
Flash Tool Firmware x64 : https://drive.google.com/file/d/0B3nYb3vN0P9VVGZvZlVIeEdQcG8/view?usp=sharing
Super SU : https://s3-us-west-2.amazonaws.com/supersu/download/zip/SuperSU-v2.79-201612051815.zip
Click to expand...
Click to collapse
Can you please assist me with flashing this ROM? (either 32bit or 64bit) - I've tried using the Flash Tool guide, but with 32bit the clean install scatter file does nothing, and with 64bit the clean install scatter file comes up with error: "chip type not match!! target efuse value: 0xa4020000"
I've tried with and without battery, I have installed Android USB driver, and I've followed this guide: https://androidmtk.com/flash-stock-rom-using-smart-phone-flash-tool
Please help!
The Seeker said:
Hello Maria and thanks for your experience.
What can you say to me about the fingerprint and camera functionality?
Do they work fine on this rom?
Click to expand...
Click to collapse
Hi.
My phone (X5pro) hasn't fingerprint reader.
The camera seems to work in normal way.
M.A.
P.S.: May be it depends by my phone, but sometimes touch is not reponsive; I have to push the power button ("stand-by") and push it again to have normal touch response.
---------- Post added at 07:24 PM ---------- Previous post was at 07:19 PM ----------
Racxie said:
Can you please assist me with flashing this ROM? (either 32bit or 64bit) - I've tried using the Flash Tool guide, but with 32bit the clean install scatter file does nothing, and with 64bit the clean install scatter file comes up with error: "chip type not match!! target efuse value: 0xa4020000"
I've tried with and without battery, I have installed Android USB driver, and I've followed this guide: https://androidmtk.com/flash-stock-rom-using-smart-phone-flash-tool
Please help!
Click to expand...
Click to collapse
The flash guide you linked is the right guide.
What exact model of phone you have?
Does the scatter and other files are in the same folder? (unzipped, you know).
Does the flashtool give any error message with the 32bit version?
Regards
M.A.
I tried both the 32bit and 64 bit versions of this rom, it's pretty good for a beta. However I had a problem with the screen going dark while using it and once the screen inverted colours randomly. Has anyone else had this problem with this rom? I'm currently using the android 6 stock rom but would love to get 7.1.1 working perfectly.
installed with SP flash tools x5pro-7.1-x32-BETA4 from a stock kernel 6.0 (R16)
with no luck. At booting snowcatPDA logo shows for a while and continuously reboots.
Flashed from ubuntu linux 16.04:
Download Only option (should I have choosen Firmware Upgrade?)
Scatter-loading File MT6735M_Android_scatter-WIPE-CLEAN_INSTALL.txt (should I have choosen MT6735M_Android_scatter.txt?)
I had the bootloader locked in development options (had it to be open?)
I also had USB debugging ON
Any tips?
xe7um said:
installed with SP flash tools x5pro-7.1-x32-BETA4 from a stock kernel 6.0 (R16)
with no luck. At booting snowcatPDA logo shows for a while and continuously reboots.
.....
Any tips?
Click to expand...
Click to collapse
Hi.
Now I'm at home.
Tomorrow morning, when I'll be at office I'll write down steps by steps I did.
(home... office..., reverse of natural manner, because I do all my mobile hobbies at lunch pause; at home PC is used by others )
Hello, here I am.
The follows are the steps, more or less, that I did.
(maybe you already did some of these)
1-Start from official R16 ROM
2- Developer option
#a. Enable USB debug#b. Enable OEM unlock
3- Security: allow unknown origin installation
4- Unlock bootloader
#a. Connect in fastboot, from ADB command mode:type: adb reboot-bootloader ___ (Wait 1-3 second)type: fastboot devices ___ (verify device is detected)#b. verify bootloader unlock statustype: fastboot getvar all ___ and you get= warranty: yes= unlocked: no#c. unlock bootloadertype: fastboot oem unlock ___ and you get-> start unlock flow---> on screen appear:vol UP=Yes; void warranty, clear ALL datavol DWN=no; no unlockPress Vol UP#d. verify bootloader unlock statustype: fastboot getvar all ___ and you get= warranty: no= unlocked: yes#e. May be phone restart
5- shut down phone ___ AND ___ get out battery
6- Flash phone with
MT6735M_Android_scatter-WIPE-CLEAN_INSTALL.txtas per normal way (You know this , after some trying...)
7- WITHOUT starting phone, ___ Flash TWRP with
MT6735M_TWRPx32_scatter.txt (or the 64, according to the ROM you flashed)
9- Put battery in ___ AND___ start in TWRP recovery
#a. hold Vol Up, press ON button until appear a micro menu, release buttons#b. choose recovery with Vol Up and confirm with Vol Down
10- in recovery, choose wipe, and on bottom of the screen slide for factory reset
11- on TWRP main, choose reboot, power off
12- get out battery for some seconds
13- get in battery and start up (It can take a lot, may be leave the phone connected to main)
This is what I did (if I remember all the single steps...)
Try and report to us.
M.A.
Nope!, in step 9 when trying to start in TWRP recovery I get a continuous bootloop showing SnowcatPDA logo
xe7um said:
Nope!, in step 9 when trying to start in TWRP recovery I get a continuous bootloop showing SnowcatPDA logo
Click to expand...
Click to collapse
Hummmm....
It seems won't go in recovery mode, I think.
Try this:
1- flash entire stock ROM
(may be take this ===http://www.doogee.cc/bbs/viewtopic.php?t=29=== just in case)
2- start phone normal, up to home screen (so the phone is as just brougt)
3- power off and try to enter stock Recovery
If it works (and your bootloader is unloked) then try this
Connect phone to PC in fastboot
and enter
fastboot devices (I do this each time, just in case PC don't detect phone)
fastboot boot recovery.img
where recovery.img is your TWRP
The phone should start in TWRP recovery
The fastboot boot recovery.img command
send recovery (kernel?) image to temp phone folder/ram
and boot from that.
It unaffect normal rom/recovery.
By this step, we check If your phone accept this TWRP and sort out some possible troubles.
M.A.
when doing 'fastboot boot TWRP-3.1.1-X5PROx32.img' I get:
USB transferring...
USB transmission OK
and doesn't reboot into recovery but it boots normally
since I'm doing this from stock kernel R16 I wonder whether it's 32 or 64 bits
However I've found recovery-twrp-3.2.0-git-20171204.img that boots!. But I don't have scatter file, only .img! This recovery is from Lineage 14.1, but since this custom ROM installs from TWRP there is no need of scatter file
I've found another TWRP that boots with fastboot boot img: the TWRP recovery for 6.0 in needrom. This one has a scatter file
xe7um said:
I've found another TWRP that boots with fastboot boot img: https://www.needrom.com/wp-content/uploads/2016/12/TWRP_DG_X5Pro.rar
Click to expand...
Click to collapse
I get this error:
Needrom do not authorizing, the links referred by another website for download the ROMs.
The link must obligatory be clicked from of Needrom.com
Click to expand...
Click to collapse
Can you please link it correctly so we can download it?
The Seeker said:
I get this error:
Can you please link it correctly so we can download it?
Click to expand...
Click to collapse
Hi.
You have to select the file direct from the Needrom site.
www.needrom.com
(up)categories-doogee
on the right, click: Serial X
again, on the right, click: X5pro
and select the TWRP you desire.
(second line, second from left)
(click on "TWRP DG X5Pro (977 dls)")
Regards
M.A.
P.S.: even the link is
https://www.needrom.com/server/download.php?name=/2016/12/TWRP_DG_X5Pro.rar
you have to download from the site.
I'll try all this at the weekend, but my two cents are that it won't work. At first attempt I flashed BETA4 with MT6735M_Android_scatter-WIPE-CLEAN_INSTALL.txt (so no need to enter recovery and wipe cache/Dalvik) with a bootloop result.
My guess is that there are different ROM versions of X5 pro, and newest are incompatible with SnowcatPDA 7.1.1 firmware. Will see in a few days...
As I was suspecting I get a bootloop after logo. Now the question is: Is there a stable custom ROM (7.1 or newer) that I could use daily instead of MM 6.0 (R16) stock ROM?
Related
DESCRIPTION:
Today i found the New Root & Installing Custom Recovery(TWRP) in MARSHMALLOW ROM surely...
I will Provide correct info and help......All This you are gonna do is At your Own Risk... Damage to your device of any type is at your Own Responsibility,,, Don't point finger at me or I will Just Laugh at you...
PREREQUISTES:
First of all, You should Unlock Bootloader so that on every reboot, Your Root shouldn't damage. You can unlock bootloader by simple procedure...and also enable the USB Debugging from Developers options in settings...
PROCEDURE:
FOR UNLOCKING BOOTLOADER, FOLLOW THIS
Download the Attached PC Software Named "Huawei Product ID Generator" then Extract this zip file...
Now open it, fill all Info in it and it will Generate a Product ID for your Phone....
Now go to this site Unlocking Code website
Login to this site using your Huawei id which you made in themes store or in huawei cloud!!
Use the Serial Number Written on BACK OF YOUR PHONE..!!
Fill like, smartphone>Product Model should be "HUAWEI Y300-0000"
then fill all fields and captcha also.. Click Submit and get the UNLOCKING CODE....
you can unlock bootloader wid that code then and root permanently....
After receiving the unlock code, write down the code;
Now go in your 4C's Settings>About Phone.
Then tap on Build number 10 times,,, you will get the Developers options in Last of Settings app. Open Developers option and Turn On the USB DEBUGGING.
Now connect your device to PC in MTP/FILES mode and then install the ADB drivers for it....
To install adb drivers correctly, use the Software Adb Driver Installer from here
LINK FOR ADB DRIVER INSTALLER
Full ADB folder is also attached Below.... put this folder in drive C.
Now Direct the cursor on the folder ADB, hold Shift and the right mouse button and choose "Open Command Window";
connect your phone to the PC in the "media device";
at the command prompt prescribe ADB Devices ;
then we write ADB reboot bootloader (the device will reboot mode fastboot);
then typed fastboot oem unlock **************** (where the asterisks replace unlock code);
BOOTLOADER UNLOCKED NOW!!
Now You are Ready to install TWRP recovery in Marshmallow first.... Download the Root and TWRP recovery File from here...
This File Also contain Stock Recovery of Marshmallow Rom
4C Root+TWRP by [email protected]
After this, unzip it and better come again in Fastboot Mode like above as explained, this time, move the recovery file to the adb folder which you want to install.
After that, type fastboot devices to see if your device is correctly attached to PC or Laptop. if yes then type this command in cmd to install the Custom Recovery(TWRP) in your phone.
fastboot flash recovery twrp.img
Then
fastboot reboot
This will reboot your phone and TWRP installed.
Gonna Done Root now... READ CAREFULLY... ROOTING MARSHMALLOW IS NOT EASY...
Download This Zip File and then Go in TWRP recovery and swipe for allow modifications...... and then flash that zip file named 1.zip...
After its done,, restart your phone and if it promp to install su, ignore it....
Open supersu app installed in your phone and let it update its binaries...when done, reboot to recovery again and this time flash This File.
Then reboot your phone and then supersu will be stable,,,
Now you have Successfully Rooted Marshmallow
Hit Thanks and Support me if you Like and get help from this thread...Thank you...
This is Based on Stock Huawei Kernel, Not compiled by Me...
Contributors:
@HassanMirza01
Mohamed A. Abd Ellatif
Version Information:
Status: Stable
Stable Release Date: 2015-09-28
Created on: 2016-02-19
Last Updated on: 2016-04-09
Reserved
Is this is TWRP for Marshmallow? Because the recovery files.you have uploaded are dated 25th September 2015?
@mfbcool yes...this is for Marshmallow... But dont swipe allow modifications!!
Member gettin error after swiping...just do read only...
I root my device by this method yesterday
but today root not work in titanum backup
I check it by root checker and everything is ok
Even though this method works, I would not recommend moving SuperSU to system partition. I didn't moved it and still SU permissions are working fine. I say so because Chainfire in his new SuperSU adopted a 'Systemless Root' method that roots without modifying the system partition so that apps like Android Pay work properly. He achieved this by patching the Boot image and so root is installed in boot image and is enabled at every boot (that's why you may experience some boot loops after rooting). This makes taking OTA updates and unrooting the device easier as you can unroot by flashing the Stock Boot.img instead of flashing the whole system partition.
I believe moving SuperSU to system partition destroys the main purpose and idea Chainfire had while making SuperSU compatible with Marshmallow. We all know EMUI won't update on Rooted devices. So it would be a pain to reflash whole Stock System Partition before taking OTA.
Hi thanks, I'm root my mobile I'm in android 6.0 now how to get back to kikkat a stock rom from twrp
@G E N E R A L open supersu app and tick the mount name separation and restart phone... Titanium, kingroot all will recognize root
Hit thanks if it helps....
@TMDMOOSA if you wanna go back to KK, Flash stock recovery first!!
Then flash the back pkg B320, then B070
If you gets error, flash middle pkg of chc rom and then flash directly KK Rom usin stock recovery!!
hi
i have a problem
by flashing file 1.zip phone reboot twice and screen go black and nothing happens after
by flashing the ROM problem fix but i cant root my phone
i try this three times!!
what can i do?
thnx
@inshaalmirza
hello, I by mistake flash the root.zip of lollipop to my phone running marshmallow. Now my phone is stuck on bootscreen. what should I do now. adb is not working
onlyankush_s said:
@inshaalmirza
hello, I by mistake flash the root.zip of lollipop to my phone running marshmallow. Now my phone is stuck on bootscreen. what should I do now. adb is not working
Click to expand...
Click to collapse
this happened for me by flashing right zip file!!!
no solution??
i wipe all the data (even system data) by custom recovery and turn off the phone and hold power volume down and up together
by doing this if you have ROM file in your sd , new ROM will be instal on your device
just please tell me how i can root my phone??
@inshaalmirza @ mfbcool please reply what to do
onlyankush_s said:
@inshaalmirza
hello, I by mistake flash the root.zip of lollipop to my phone running marshmallow. Now my phone is stuck on bootscreen. what should I do now. adb is not working
Click to expand...
Click to collapse
onlyankush_s said:
@ mfbcool please reply what to do
Click to expand...
Click to collapse
Flash the complete Marshmallow ROM through Stock Recovery.
matinone said:
hi
i have a problem
by flashing file 1.zip phone reboot twice and screen go black and nothing happens after
by flashing the ROM problem fix but i cant root my phone
i try this three times!!
what can i do?
thnx
Click to expand...
Click to collapse
no one??
please
@onlyankush_s go in fastboot and then flash the system.img again.... Or flash stock M wid stock recovery...
@matinone there is written that flash supersu again after flashing 1.zip
Flash supersu zip too and tell... Or flash srock rom again by same method i told in most previous posr.... I am sick right now thats why replying late!!
inshaalmirza said:
@matinone there is written that flash supersu again after flashing 1.zip
Flash supersu zip too and tell... Or flash srock rom again by same method i told in most previous posr.... I am sick right now thats why replying late!!
Click to expand...
Click to collapse
thanks a lot!!!
it worked
by the same steps.it look like i got lucky this time
hope you get better soon
hi
plz help
i flash stock recovery and my phone go to rescue mode
help
I have successfully built TWRP 3.0.0-0 for our device which fixes the weird swipe to allow modifications bug and is fully compatible with Android 6.0 Marshmallow.
See here: http://forum.xda-developers.com/android/development/recovery-twrp-3-0-0-0-huawei-honor-4c-t3349495
Also, to re-flash Stock ROM, you don't need to flash Stock Recovery. Huawei phones have 2 inbuilt recoveries. The second recovery (which is the Stock) can be accessed by 3 buttons method (Power + Volume Up + Volume Down).
@mfbcool i saw that thread early... Great work man... I know huawei have 2 inbuilt recoveries but 2nd one is erecovery and thats of no use at all... I tried it too many times!! If twrp 3.0 can flash update.app files,,, it gonna rocks , wish u best of luck man!! You did it
Thanks to:
Easyloy for Recovery
Ampher for idea
rgusev for bring to idea life
alximiktik for bring needed files
Flashing ROM with QFIL:
Getting ready:
Download and install on your PC:
vcredist_x86.zip
QPST_2.7.422.ZIP
Qualcomm_USBDriver_2.1.0.5.zip or Qualcomm_USB_Drivers.zip
Turn off your Vibe P1.
Hold Volume Up key and plug in USB cable conected to PC.
Open Device Manager on PC (press win+r and type "mmc devmgmt.msc" without quotes) then seek Qualcomm Lenovo HS-USB QDLoader 9008 in COM & LPT ports.
If you can see Qualcomm Lenovo HS-USB QDLoader 9008, you are ready to flash!
Flashing ROM:
Downoad QFIL ROM ( for exampe one of this: https://yadi.sk/d/hY3kNWJGrnpCU?ncrnd=5389 ) and unpack it.
Find QFIL in your Stary menu and launch it.
Select Qualcomm Lenovo HS-USB QDLoader 9008 (COM*) port by using "Select Port..." button
Click "Browse..." near "Programmer patch" field and select prog_emmc_firehose_89**.mbn file from the ROM's folder.
Click "Load XML…" and select "rawprogram0*.xml" file and then select "patch0.xml" file.
Press "Download" button and wait untill it ends (reboot or "ready" message).
If "ready" message appears and device does not go to reboot, then hold Volume UP + Power buttons for ~12 sec.
Flash unlocked bootloader & recovery:
Read "Flashing ROM" manual
Download P1a42_S272_160506_ROW_QPST (+uBL +Recovery + Root +region ) and unpack it.
If you have different ROM installed, then flash S272 (by selecting rawprogram0.xml) otherwise go to the next step.
Flash unlocked bootloader (by selecting rawprogram_unlock.xml) and reboot into ROM.
Open developers options and select "OEM unlock".
Also you can check Bootloader status by rebooting to bootloader and typing "fastboot oem device-info" (without quotes), if it still locked, then type "fastboot oem unlock-go" (without quotes).
After (and only then) bootloader will be unlocked you can flash custom recovery by one of following ways: by QFIL, selecting rawprogram_twrp.xml or bootloader (fastboot flash recovery recovery_twrp.img).
When recovery is flashed, you can get into it by holding Volume UP + Volume DOWN keys while booting or using "adb reboot recovery" console command (without quotes).
Advanced flash unlocked bootloader & recovery:
BootLoader unlock:
Download file: emmc_appsboot.zip
Unzip.
Add listed files from QFIL-ROM to the same folder:
prog_emmc_firehose_8936.mbn
gpt_main0.bin
gpt_backup0.bin
rawprogram0.xml
patch0.xml
Run rawprogram0-fix.bat
Flash using QFIL, by selecting rawprogram0_aboot.xml.
Sometimes you need to do extra staff:
Open developers options and turn on:
ОЕМ unlock
USB debugging
Download: unlock-bl.zip
Unzip.
Plug USB cable and run unlock-bl.bat
wait until "Ready!" or the window disapire
Ready!
Custom recovery (TWRP):
Method one, fastboot:
Download: TWRP-FB.ZIP
Unzip.
Run rec-inst.bat
Method two adb(Root needed):
Download: TWRP.ZIP
Unzip.
Run rec-inst.bat
Root (SuperSU):
If you suscesfully unlocked bootloader and flashed recovery then you can:
download latest SuperSU
Put it to you sdcard (do not unpack it!)
Reboot to recovery and install ZIP.
Region:
To find out which region is set dial ####5993# or ####59930# using stock dialer
To change region:
Put easyimage.zip to root of SDCard
Dial ####682# using stock dialer
To get back to stock (for updating, etc.):
Flash stock ROM with QFIL.
You can use s272 listed above, but you also need to download, unzip and change rawprogram0.xml file before flashing to get stock recovery!
Is this the chinese version or the ROW? As far I know VIBEUI is for China.
If it's ROW I'll try it.
Teddy. said:
Is this the chinese version or the ROW? As far I know VIBEUI is for China.
If it's ROW I'll try it.
Click to expand...
Click to collapse
It's ROW! ROW also based on Vibe UI, but china ROMs has newer versions.
Any way to not install TWRP as I don't need it?Also I'll flash it when I get home.
Sent from my Lenovo P1a42 using XDA-Developers mobile app
Teddy. said:
Any way to not install TWRP as I don't need it?Also I'll flash it when I get home.
Click to expand...
Click to collapse
You can't install root on 6.0 without TWRP, but if you don't need it, woy also don't need to unlock BL, so you cat just flash ctock ROM.
Do I need to wipe my data or not? (I'll still get a backup, but ya know, just to get a titanium backup done.
Teddy. said:
Do I need to wipe my data or not? (I'll still get a backup, but ya know, just to get a titanium backup done.
Click to expand...
Click to collapse
You don't need to do any backup. But if you come to 6.0 from 5.1, you better do!
I flashed ROM everything went good, next thing I flash twrp, works, installed supersu and now I'm left with a phone without OS. I cannot get into download mode using the volume up + usb method and also I can get into the recovery. What can I do?
EDIT: After about 26 hours of just non-stop searching I finally got it flashed again.It was a painful experience but if somebody wipes the /system partition, don't hesistate to pm to help you come back on track.
Thanks for the great tutorial !
What is the difference between flashing unlocked bootloader & recovery: the easy way and advanced ?
Or there is no and both mkethods lead to same end ?
pabgar said:
What is the difference between flashing unlocked bootloader & recovery: the easy way and advanced ?
Or there is no and both mkethods lead to same end ?
Click to expand...
Click to collapse
They are lead to the same end but using different methods: manual, auto, with root or without, etc.
Can i root it without unlocking bootloader???
deadman220 said:
Can i root it without unlocking bootloader???
Click to expand...
Click to collapse
You can root only 5.1. Unlocked bootloader is the only way for 6.0 ROW ROMs.
Is there a way to lock it back or it's permanent?
deadman220 said:
Is there a way to lock it back or it's permanent?
Click to expand...
Click to collapse
You are not unlocking bootloader, you just flashing already unlocked one. So you can just flash it back!
I must say that after Marshmallow update, Vibe P1 is the best smartphone I had ever
Smooth working, great battery life, no problems at all.
After flashing TWRP and applying super su I am struck at Lenovo logo tried clearing cache and dalvik cache too still same
Is fingerpint unlock working on MM after root ?
GPSSlovakia said:
Is fingerpint unlock working on MM after root ?
Click to expand...
Click to collapse
Yes! And I'm using it on rooted ROM and with unlocked BL. But there is one little caveat: you can't unlock device with your finger for first time after reboot (it is MM feature). But after first time it working fine!
Thx for this awesome work .. ur amazing bro
---------- Post added at 11:00 AM ---------- Previous post was at 10:32 AM ----------
I want to ask about how to install updates after recovery .. i can't install updates right now after recovery
MoemenMoemen said:
I want to ask about how to install updates after recovery .. i can't install updates right now after recovery
Click to expand...
Click to collapse
You need to go back to full stock, it's the only way to get OTA.
Please look at "To get back to stock (for updating, etc.):" at first post (just updated it)!
******************Root Recovery Doogee X5 max pro*******************
Your waiting Time IS Now Finished Here is Complete Guide to Root Doogee X5 Max Pro install twrp And More,
Hit :good:
ADB & Fastboot
Before doing most things mentioned below you will need "adb" and "fastboot" installed. Two of your options are to install the Android SDK Tools or the Minimal ADB and Fastboot tool. If you are somewhat new to this I highly recommend the second one. Go here, download the latest version (1.3.1 as of this writing), and install it. When setup is complete you should have an icon for the Minimal ADB and Fastboot tool.
Note: I highly recommend you add "C:\Program Files (x86)\Minimal ADB and Fastboot" to your PATH variable in Windows. This way you can open a Command Prompt anywhere and use adb or fastboot.
1) Unlock Bootloader
Power on the phone and skip through all of the setup options
Go to Settings -> About device
Tap Build number five times to enable Developer options
Go to Settings -> Developer options
Enable OEM unlocking
Enable USB debugging
Plug the phone in to your PC and authorize it
Open a Command Prompt
Type adb reboot-bootloader
The phone should reboot and in a very tiny font at the bottom you should see => FASTBOOT mode
Type fastboot devices to verify that your PC sees it correctly
Type fastboot oem unlock
Press Volume Up to say Yes and wait for this to finish
Type fastboot getvar all and look for (bootloader) unlocked: yes
Type fastboot reboot
You should see your phone reboot a couple times as it erases the phone
Install twrp-
Power on the phone
You can configure your phone now or just skip through all of the setup options and do that later
Go to Settings -> About device
Tap Build number five times to enable Developer options
Go to Settings -> Developer options
Enable OEM unlocking
Enable USB debugging
Plug the phone in to your PC and authorize it
Open a Command Prompt to wherever you extracted the .img file
Type adb reboot-bootloader
The phone should reboot and in a very tiny font at the bottom you should see => FASTBOOT mode
Type fastboot devices to verify that your PC sees it correctly, rename twrp to recovery.img
type fastboot flash recovery recovery.img to flash recovery
Type fastboot reboot
Rooting-
Download BETA-SuperSU.zip and save it to the phone's internal memory or an inserted microSD card
Plug the phone in to your PC
Open a Command Prompt
Type adb reboot recovery
You should now be in twrp. Go to Install zip, find SuperSU.zip, and install it
When it finishes go to Go Back -> Reboot Phone -> No
Once the phone boots up launch SuperSU and configure it as you like
Other Solutions-
i have doogee x5 max-s (i geuss limited editon in algeria ) with mtk6735 . i do evrything and all steps but when i reboot to recovery mode i have ( no command ) in the screen .... how to fix that ? sorry for my ****ty english XD
I had the same Issue but i have found a solution!
After you have flashed the twrp recovery, dont reboot the phone! the "recovery.sh" will replace the twrp on every boot!
Just pull off the battery after flashing, disconnect usb and put the battery back in to the phone.
Now get in to the recovery by pressing volume up and power button together until the select bootmode menue appears.
select recovery with the volume up button and enter with the volume down button.
and now you should be in the twrp main menue.
i hope it works for you too!
greetz from the lizard
It does not work from step 12, all the drives are correctly installed and windows recognizes the cell, the recovery image is in the internal memory and also in the sd but of the error "can not load Recovery.img". I tried all the tutorials on the net to do root and nothing worked.The flash does not recognize to pass the recovery also the installed drivers because windows recognizes the cell phone.
pitro1 said:
It does not work from step 12, all the drives are correctly installed and windows recognizes the cell, the recovery image is in the internal memory and also in the sd but of the error "can not load Recovery.img". I tried all the tutorials on the net to do root and nothing worked.The flash does not recognize to pass the recovery also the installed drivers because windows recognizes the cell phone.
Click to expand...
Click to collapse
use sp flash tools to flash recovery, scatter also added with twrp
Flash does not pass the file in the download only option, the process does not start. I reinstalled ROM by firmware mode all ok, but the process of passing recovery on command 12 and 13 of the error message. I manually copied the recovery to the sd and internal memory but also from the error. Does not find the file speaks that it is not a command found.
pitro1 said:
It does not work from step 12, "can not load Recovery.img".
Click to expand...
Click to collapse
Don't use Capital R's
fastboot flash Recovery Recovery.img
Code:
fastboot flash recovery recovery.img
Doogee X5 Max Pro - Update 01/16/2017 + TWRP-3-0-2 & SuperSU-v2.79
Working root for Update 01/16/2017
Title: Doogee X5 Max Pro
Listed: 01/19/2017 11:21 pm
ROM Version: ROM Android 6.0
Doogee X5 Max Pro - Update 01/16/2017
TWRP-3-0-2 + SuperSU-v2.79
Use This Version Flashtool
SP_Flash_Tool_v5.1620.00.000
XN Logos said:
use sp flash tools to flash recovery, scatter also added with twrp
Click to expand...
Click to collapse
Until today I could not do root on x5 max pro. In the method below even downloading the twrp when starting with the power + volume down button start with a menu in Chinese and if you start with volume up + power goes in the default recovery mode.
Same as Pitro1 I am on 16.01 update and I cannot install twrp no matter what I try.
I tried x32 and x64. I tried rebooting directly on recovery or first load system and then adb reboot recovery. I tried to format all first (now I lost my Imei and so on lol). I downgraded and updated again. Downgrading works only with 26.12 version. All others are giving me Colorado lines on the screen and nothing else...
OEM unlock, file transfer, adb, fastboot, drivers detection, are all working good. Only I cannot install twrp...
Also I cannot write nvram nor with SN Writer 2.1504 nor with Imei & SN Writer 1.7.2, MetaAP mode fails all the time...
I'm just about to send it back...
How i rooted my Doogee X5 Max Pro
How i rooted my Doogee X5 Max Pro
- Unlock Bootloader tutorial in the first post By XN Logos.
- Updated ROM to Android 6 with SP FLASH TOOLS V.5.16.20
- boot phone for 1st start and activate Developer and USB debugging
- Installed TWRP-32x + SuperSu with SP FLASH TOOLS V.5.16.20
i returned the phone as i had no imei anymore.
i got a new one, i did not put any sim or whatsoever, i just unlocked bootloader, and updated to 16.01 version
then i tried to install twrp via fastboot and it did not work, i did it with sp flash tools as advised and removing the battery prior (don't forget to!). it worked !
Stripe_nl said:
How i rooted my Doogee X5 Max Pro
- Unlock Bootloader tutorial in the first post By XN Logos.
- Updated ROM to Android 6 with SP FLASH TOOLS V.5.16.20
- boot phone for 1st start and activate Developer and USB debugging
- Installed TWRP-32x + SuperSu with SP FLASH TOOLS V.5.16.20
Click to expand...
Click to collapse
How old is your phone and what build version was it at before you started? Because this doesn't work on mine. Which of the "Android 6" ROMs did you flash to start with as I've tried flashing mine back to an earlier one in case it's something with the later stuff that my phone has come with but they either don't make a difference or they won't even boot.
I tried the method in the first post here and the phone wouldn't even boot (switch on and you get the Doogee logo in silver for a few seconds then it reboots and does the same again). I had to flash the stock ROM from NeedROM to get it working again.
I've tried flashing TWRPx32 and x64 available NeedROM both with SPFlash tools and with ADB. Generally flashing it with ADB from the command line leaves the phone in that boot-loop. If I flash it with SPFlash when you try to boot into Bootloader afterwards you get the Doogee logo in silver for a few seconds then it seems to reboot again on it's own and boot normally - you don't even get the menu to choose Fastboot, Recovery or Normal. From then on trying to boot to the Bootloader gives you the menu but choosing Recovery gives you the standard recovery.
It's almost as if something is overwriting the recovery partition with the original after I flash TWRP onto it.
Anyone got any suggestions about where I might be going wrong or a way around whatever additional security they might have put in there?
Hi. I have tried to root my x5 max pro with flash tools to load TWRP, but it always restarts normally and the TWRP does not come out. I found you and I started to try this method to load the TWRP. Does everything good, unload bootloader and load recovery, but loading the TWRP gives me error .:
Device unauthorized.
This adb's $ ADB_VENDOR_KEYS is nor set; Try adb kil-server if that seems wrong
what I do?
rooting X5 Max pro in Ubuntu 16.04
Hi all, this is my first china phone and I basically bought it only to experiment, I'm a linux power user but this is the first time I 'play' with an android OS.
thanks to multiple guides and posts on this and other forums I'm getting somewhere and learning a lot about how to manage an android OS, I'm sharing a bit of info I unovered about doing this under ubuntu but I'm also stuck and in need of guidance, please help me.
Linux specific issues:
I'm running ubuntu 16.04 LTS, installed fastboot and adb tools from ubuntu repos, with these tools and no other modification to my system I could follow the tutorial on how to unlock the OEM bootloader with adb and fastboot.
accordingly to this post about SP flash tool in linux you might need to blacklist a modem manager module in order for SP flash tool to connect to the phone, you also need to install usb development tools (package libusb-dev) and check through dmesg that your linux OS can actually properly read mediatek usb devices.
After following the above mentioned instructions (both the linux sp flash tool tutorial and the bootloader unlocking howto) I could get SP flash tool linux (multiple version) to see the phone after you connect it while SP flash is downloading the new recovery image and flash it with an ok message.
If you get stuck with a BROM error 1013 remember to start sp flash tool with root privileges.
Phone specific issues:
I can get SP flash tool to flash my phone recovery with an ok message confirmation but the phone keeps rebooting with doogee recovery and not twrp. I'm on the newest stock ROM update (20170116) as of current post date. I've been using 32 bit TWRP images from multiple sources and linux version 5.1620 of spflash tool from their website
so my questions are as following:
1) after reading other posts I think I might have to play with different versions of SP flash tool and TWRP until I get the right combination, I think I might be using 64bit spflash tool for linux to flash a 32bit rom or something like that, can anybody confirm precise version number of the stock rom, TWRP and SP flash tool that worked out for you?
2) should I try to install the whole stock ROM posted in this chinadevices thread before trying to flash only TWRP recovery? please also check the linked thread for multiple custom ROM being ported to this phone, please also note that the full stock rom this poster uploaded (it's in the "all firmware" link) contains another flashing tools with chinese instruction called MultiDownloadTool.
www.china-devices.com/forum/index.php?threads/doogee-x5-max-pro-mt6737-custom-roms.20527/
3) I don't have access to a windows installation right now, but I do have a Win10 VM under Vmware workstation 12 pro, so I could try windows version of sp flash tool, do you guys think that USB passthrough would work?
ibrooks said:
How old is your phone and what build version was it at before you started? Because this doesn't work on mine. Which of the "Android 6" ROMs did you flash to start with as I've tried flashing mine back to an earlier one in case it's something with the later stuff that my phone has come with but they either don't make a difference or they won't even boot.
I tried the method in the first post here and the phone wouldn't even boot (switch on and you get the Doogee logo in silver for a few seconds then it reboots and does the same again). I had to flash the stock ROM from NeedROM to get it working again.
I've tried flashing TWRPx32 and x64 available NeedROM both with SPFlash tools and with ADB. Generally flashing it with ADB from the command line leaves the phone in that boot-loop. If I flash it with SPFlash when you try to boot into Bootloader afterwards you get the Doogee logo in silver for a few seconds then it seems to reboot again on it's own and boot normally - you don't even get the menu to choose Fastboot, Recovery or Normal. From then on trying to boot to the Bootloader gives you the menu but choosing Recovery gives you the standard recovery.
It's almost as if something is overwriting the recovery partition with the original after I flash TWRP onto it.
Anyone got any suggestions about where I might be going wrong or a way around whatever additional security they might have put in there?
Click to expand...
Click to collapse
Same here. May a work around would be finding out the oem commands in fastboot. I have seen a tutorial to get them, but you have to be root: https://www.xda-developers.com/how-to-discover-hidden-fastboot-commands/
I search a simple method
Why all so complicate? I am searching for a simple way to root.
For my old Doogee X5, I discovered just
update-ROOT-DOOGEE_X5.zip
Copy the zip to the micro-SD-card
Settings -> Phone info -> Update -> menu "update local" -> choose zip from micro-SD-card.
Start update.
That's all!
Now I search for such a simple solution for my new Doogee X5 MAX pro.
I do not want any methods with "volume down power", because my X5 MAX pro has the menus after "Volume down power" start in Chinese language.
Recovery TWRP x32
http://www.needrom.com/download/twrp-x32-rom/
http://www.needrom.com/category/doogee/serial-x-doogee/x5-max-pro/
This version finally works ! Thank you
Neaw said:
Recovery TWRP x32
http://www.needrom.com/download/twrp-x32-rom/
http://www.needrom.com/category/doogee/serial-x-doogee/x5-max-pro/
Click to expand...
Click to collapse
Hi there,
I just tried the first file you posted, (twrp-x32-rom), and this one works for me after all previous attempts to boot up TWRP failed. Thanks for the link !
What I had tried before:
I have a relatively new X5 Max Pro, which I ordered a week ago. I updated the firmware to the newest version (20170116) using the OTA update function.
Then I tried to flash TWRP using the files from "needrom.com" which seem to have worked on older versions of the phone/firmware, but did not work for the newer versions.
I tried 32bit and 64bit TWRP versions and flashed them with SP flash tool, but when pressing Vol+/Power the phone would not boot into TWRP recovery. Insted, when selecting "Recovery" from the boot menu, the phone would show the Doogee logo in silver, then blink once, then boot up normally. When repeating this process, then phone boots into Stock recovery, indicating that the TWRP I flashed was replaced by stock recovery.
However, I just flashed the recovery.img from "TWRP LATEST" (the first file posted by Neaw) with SP flash tools and was finally able to boot into TWRP. I installed the superSU-zip 2.79 included in the link, and I am now rooted. Once again, thanks for posting this :good:
Greetz, Ollek74
Doogee X5 MAX! SERIUS PROBLEM......
Hello Guys i have a serious problem with my phone.....i have Malware on it and i cant uninstall it or anything alse.....the worst thing is that my phone not responding in any connection except that charging.....i can't have access on my storage cause this is not allowed or gives the choice! i tried everything but nothing nor the usb debugging or anything else please give me your help!!!!
[UPDATE]: USE THIS ONLY FOR NOUGAT 7 OR 7.1! THERE IS A DIFFERENT GUIDE FOR ANDROID OREO!
https://forum.xda-developers.com/xperia-x/how-to/root-xperia-x-f5122-android-n-34-2-2-47-t3594502 (Written by YasuHamed, not me!)
If you are not interested in android Oreo, or you want to go back to Nougat, this guide is still valid! [End of Update]
This is a guide for newbies or for people that are simply confused. If you have any questions, you can always ask me, and I will reply. but please make sure you haven't made mistakes and do not ask about things that are already stated here. Let's go!
BEFORE DOING ANYTHING, NOTES
-make sure you have installed ADB : https://forum.xda-developers.com/showthread.php?t=2588979
-make sure ADB can read your phone with the correct drivers installed. If you have trouble with that, read "DRIVERS" section
!It is absolutely necessary to install the drivers correctly!
-Backup your stuff if you have any, you will need to delete everything from the phone
-Enable USB debugging
-Note: some of these instructions apply to Windows OS only!
-Note: links to downloads have been shortcutted as much possible to make it easier for you!
-Find some stock roms here! https://forum.xda-developers.com/xperia-x/how-to/sonyx-f5121-downgrade-8-0-0-to-7-1-1-to-t3754986
(Credit: HEKER510)
-Warning: you will lose your warranty!
-I am not responsible for any damage done to your device.
BACKUP DRM KEYS (OR WORKAROUND)
You may want to unlock your bootloader. If you unlock it without backing up the DRM keys, you will lose them. I did that mistake and I regret it. If you already did, there is an alternative solution, skip to step 8.
1) If you are running android 7 nougat, you will need to downgrade to MM. If you are running MM, skip to step 7.
2) You will need to wipe everything before rolling back, so if you have any data back it up
3) Download any stock MM 6.0.1 firmware for the xperia X. You can find one here : https://mega.nz/#!1xRj2CYS Decryption key: !qBVi7yky8AL84eUF3bpTTGQ2YmN0ePCjc-eSDZGIZCI
Watch out: if you have the dual SIM model, F5122, you need to download accordingly!
For more firmwares, check "BEFORE DOING ANYTHING"
4) Download the latest flashtool: http://www.flashtool.net/downloads.php
Upon installation, tick on fastboot, flashmode drivers! If it didn't ask you, go to the installation folder and run Flashtool-drivers.exe. Please read "DRIVERS" section!
5) Flash the .tft file
How to flash?
0. Go to "C:\Users\[Your PC Name]\.flashTool\firmwares" , and put your firmware .ftf file in there!
1. Open Flashtool and click on the lightning bolt icon (first one from the left)
2. In the prompt, choose flashmode.
3. Under firmware, click on the version you put (It should probably only be one option)
4. Under wipe , tick everything. Under the others, do not make any changes.
5. Click "Flash"
6. When the popup appears, connect your device. It needs to be powered off, and connected while you are holding the
"volume down" button.
7. Wait for it to finish.
8. Done. Boot up the device, it might take some time to open so don't worry.
Click to expand...
Click to collapse
6)If your phone bootloops, try flashing again or a different firmware and make sure you followed the steps correctly.
7) Once your phone successfully boots android MM, use Dirtycow to get your DRM keys out: https://forum.xda-developers.com/crossdevice-dev/sony/universal-dirtycow-based-ta-backup-t3514236
8) If you unlocked the bootloader before backing up your keys, you can use DRM kernel fix. You can get it here: https://forum.xda-developers.com/xperia-x/development/kernel-drm-fix-nougat-t3530849 Before using it check out the custom rom that includes this fix and other things.
UNLOCK BOOTLOADER
This is relatively easy and you can follow official sony instructions to do it.
1) Go to your phone settings, developer options, and enable OEM unlock
"But there is no developer options!" -Go to the bottom of your settings, system, about phone, and tap multile times on "Build Number", also at the bottom.
Click to expand...
Click to collapse
2) If you haven't already , install ADB fastboot and configure drivers (Link on top )
3) Follow the steps on the Sony website to get your unlock code: https://developer.sonymobile.com/unlockbootloader/email-verification/
4) After unlocking, a warning message on boot is normal!
INSTALL RECOVERY
Installing TWRP on your xperia X is very important, since you can flash zips and img files so easily, plus wipe, backup and other features.
1) Download the TWRP .img file: https://androidfilehost.com/?w=files&flid=197369 (Credit: eagleeyetom )
2) Make sure you have USB debugging enabled
3) Open your downloaded twrp folder
4) Run CMD in that folder (shift + right click inside the folder, Open CMD here )
5) Connect your Xperia X to your PC
6) Type these lines:
adb reboot bootloader
fastboot flash recovery recovery.img [where recovery.img is your twrp file name]
fastboot reboot
7) If no errors, twrp is now installed. Once your phone boots , turn it off,. To access TWRP recovery hold power button and volume down button until the TWRP menu appears.
STOCK ROM, ROOT
If you just want to root and not interested in additional features and tweaks, you can simply flash SU through TWRP to get your phone rooted.
Note: Current best stock ROM available: 7.1.1 (252) - better features than older ver, and good battery life.
0) Install your desired stock firmware using the exact same previous instructions, (under DRM section) with flashtool.
1) Download SuperSu
Or magisk, using YasuHamed guide mentioned on top, but I have not tested with anything other than Oreo 8.0
Use magisk if you want more stability / root features (like hide root from apps, modules )
2) copy it anywhere on your phone
3) Run TWRP
4) Tap on install
4) Flash the file
5) Reboot, you are now rooted
6) Insert your DRM keys if you have them
Custom ROMS
After unlocking the bootloader and installing TWRP this is the best way to go in order to get full root, tweaks.
https://forum.xda-developers.com/xperia-x/development/rom-xperia-x-pexorom-v1-0-0-f5122-f5121-t3590552
^ This is a very good custom ROM made by prmk74. You can see its features in his thread.
1) Download the rom and copy it to your phone
2) Run TWRP
note: It is recommended to wipe dalvik, cache, data ( your storage partition doesn't need to be wiped)
3) Tap install, find your downloaded file and execute
note: It is recommended to wipe dalvik, cache, data ( your storage partition doesn't need to be wiped)
4) Follow on-screen instructions, do not stop the booting after finishing the installation, it will take some time
5) Insert your DRM keys if you have them
6) For those who lost their keys: Now the functions like vivid image mode are working properly.
DRIVERS
For Windows 8/8.1/10 users, how to solve driver problems:
1) Press the Windows key + R together and in the ‘Run’ box type: shutdown.exe /r /o /f /t 00
– Now make the following selections to boot into the Start Up Setting Screen: Troubleshoot > Advanced options > Start Up Settings > Restart
– Then, when the machine restarts, select number 7 i.e. “Disable driver signature enforcement”. Your machine will start with Driver signing enforcement disabled until the next reboot.
B) Now you can install the Flashtool drivers. Go to the flashtool install location and run the drivers.exe again, check fastboot and flashmode
– Windows will warn that the driver is not signed and will require you to confirm the installation.
– Once the installation is complete, reboot the machine
TO CONCLUDE:
This is what you may want to do to get the most out of your new xperia x:
1) Backup DRM
2) Unlock BL
3) Install TWRP
4) Flash Persian (or a different rom) through TWRP (And subscribe to the thread so you receive updates)
5) Restore DRM
Notes:
None of the links, tools are of my work, I'm just writing a guide for my fellow XX owners
^^ this guide is so really good :3. I post flash script for someone dont know how to find it ^^
unzip it in this position.
C:\Users\[user-name]\.flashTool\mydevices
max26292 said:
^^ this guide is so really good :3. I post flash script for someone dont know how to find it ^^
unzip it in this position.
C:\Users[user-name]\.flashTool\mydevices
Click to expand...
Click to collapse
Thanks!
Thanks for this, I need some help!
All was fine until I tried flashing the recovery, comes back "partition unknown" error. I was unable to bring the device up under an adb device only as a fastboot device.
34.0.A.1.264_R3A firmware.
Different official sony driver (Sony bootloader guide driver didn't work)
Device now hangs on the Sony logo after boot messgae warning "OEM bootloader unlocked, device not trusted," any help would be appreciated.
brianx87 said:
Thanks for this, I need some help!
All was fine until I tried flashing the recovery, comes back "partition unknown" error. I was unable to bring the device up under an adb device only as a fastboot device.
34.0.A.1.264_R3A firmware.
Different official sony driver (Sony bootloader guide driver didn't work)
Device now hangs on the Sony logo after boot messgae warning "OEM bootloader unlocked, device not trusted," any help would be appreciated.
Click to expand...
Click to collapse
These USB drivers are very annoying to work with. I got mine to finally work using a program called ADB driver installer. http://adbdriver.com/downloads/ Choose automated installation and try what I said. I believe it should fix your problem, after installing the drivers reboot and flash again.
Other than that, I have to ask are you 1000% sure you used the exact commands?
I saw another thread someone mistook
"flash recovery recovery.img" for "flash recovery.img"
"recovery" should be included before the recovery file name
brianx87 said:
Thanks for this, I need some help!
All was fine until I tried flashing the recovery, comes back "partition unknown" error. I was unable to bring the device up under an adb device only as a fastboot device.
34.0.A.1.264_R3A firmware.
Different official sony driver (Sony bootloader guide driver didn't work)
Device now hangs on the Sony logo after boot messgae warning "OEM bootloader unlocked, device not trusted," any help would be appreciated.
Click to expand...
Click to collapse
Why didn't the sony guide work? It worked for me. Just so you know, the "device cant be trusted" message is appearing on everyones' phones after unlocking the bootloader, it's not a problem or something
the part of restoring DRM is skipped,
please xplain
YasuHamed said:
the part of restoring DRM is skipped,
please xplain
Click to expand...
Click to collapse
I know, as I said there is room for improvement. The reason I did not include it is because I never did it myself, so I don't want to write something wrong or something that could lead to problems. I write something only if I am 100% sure. If anyone of you is kind to offer that piece so the guide is complete I will be glad
FoxTheLegend said:
Why didn't the sony guide work? It worked for me. Just so you know, the "device cant be trusted" message is appearing on everyones' phones after unlocking the bootloader, it's not a problem or something
Click to expand...
Click to collapse
Ok I figured out what I did wrong and was able to amend another issue I edited out of this post.
brianx87 said:
Ok I figured outwhat I did wrong (able to boot into the os and warning message no longer an issue ) and the issue I am now facing is that twrp is hanging on the boot screen. Is this version of twrp built to a specific version of android?
Click to expand...
Click to collapse
What do you mean hanging? the twrp logo frozen?
FoxTheLegend said:
What do you mean hanging? the twrp logo frozen?
Click to expand...
Click to collapse
Working now, used a previous version of twrp by mistake. Using latest build works fine now, have to wait to get home from work to proceed with the rest, annoying procedures this stuff but your guide is great.
brianx87 said:
Working now, used a previous version of twrp by mistake. Using latest build works fine now, have to wait to get home from work to proceed with the rest, annoying procedures this stuff but your guide is great.
Click to expand...
Click to collapse
Thanks, Im glad to it works now
FoxTheLegend said:
I know, as I said there is room for improvement. The reason I did not include it is because I never did it myself, so I don't want to write something wrong or something that could lead to problems. I write something only if I am 100% sure. If anyone of you is kind to offer that piece so the guide is complete I will be glad
Click to expand...
Click to collapse
thank you for the answer sir
i am unable to find any twrp that work for my F5122, it always bricks and i have to reset.
is there any twrp recovery image that works correctly with f5122?
YasuHamed said:
thank you for the answer sir
i am unable to find any twrp that work for my F5122, it always bricks and i have to reset.
is there any twrp recovery image that works correctly with f5122?
Click to expand...
Click to collapse
Hmm.. Did you try the one from the poison thread? I myself have still the old version installed (not 3 or 3.1) if I find it on my pc I will share it with you
FoxTheLegend said:
Hmm.. Did you try the one from the poison thread? I myself have still the old version installed (not 3 or 3.1) if I find it on my pc I will share it with you
Click to expand...
Click to collapse
I have to modified kernel
all i want is to boot it via fastboot command
for example i have the rooted kernel SU installed (but battery drain is high) so i what wana do is flashing kernel with all securities OFF and then with twrp image i will do
Code:
fastboot boot twrp.img
i will boot the X in to twrp and i will flash SUPERSU via twrp.
thanks all
YasuHamed said:
I have to modified kernel
all i want is to boot it via fastboot command
for example i have the rooted kernel SU installed (but battery drain is high) so i what wana do is flashing kernel with all securities OFF and then with twrp image i will do
i will boot the X in to twrp and i will flash SUPERSU via twrp.
thanks all
Click to expand...
Click to collapse
I see, but don't you want to figure out why it's not working normally? Noone has reported a similar problem
FoxTheLegend said:
I see, but don't you want to figure out why it's not working normally? Noone has reported a similar problem
Click to expand...
Click to collapse
since there is no offcial twrp for X out yes and only DORA (XA) is available) even XA don't work for X
so either twrp 2.8, 3.0 or 3.1 any should just boot in order to let us flash superSU.
YasuHamed said:
since there is no offcial twrp for X out yes and only DORA (XA) is available) even XA don't work for X
so either twrp 2.8, 3.0 or 3.1 any should just boot in order to let us flash superSU.
Click to expand...
Click to collapse
=-= try to use this command fastboot flash recovery [your_recovery_name].img
I use f5122 and flash successfull twrp 3.0.2 and 3.1. with this, i flash some kernel and rom without any problem.
Everything is working good for me now, the only issue now is restoring the DRM keys, has anyone found a credible source for doing this on this device?
How can I be sure I have a full root? I can't seem to be able to uninstall some of the bloatware only disable it!
brianx87 said:
Everything is working good for me now, the only issue now is restoring the DRM keys, has anyone found a credible source for doing this on this device?
How can I be sure I have a full root? I can't seem to be able to uninstall some of the bloatware only disable it!
Click to expand...
Click to collapse
Well titanium backup can assure you but I don't see why you wouldn't have full root... You need an app uninstaller to uninstall bloatware, it can't be done through the settings you know that right
Background....wanted to upgrade from 6 to 8 so went through the process using miflash and one of TurkDevs packages (A2017V3.0.0B01-2_FULL_EDL_PACKAGE_BY_TURKDEVS).
Everything installed ok but the package was kind of 1/2 Chinese so I removed it. Have been trying to install another package but with no luck so far.
When I tried other pkgs I was getting a message that the device state was locked....used AXON_7_BOOTLOADER_UNLOCK_IMAGES_BY_TURKDEVS to unlock device ....worked fine
Current state - When device powers up it goes directly into bootloader and has the following info : fastboot mode
Product name: AILSA_II
Variant - MTP eMMC
Bootloader version - blank
Serial number - 8fb6f15
Secure Boot - Enabled
Device - Unlocked
Device will toggle between bootloader and recovery mode.
In my Device Manager it recognizes the phone as "Android bootloader interface" but has dropped the Qualicomm 9008 usb driver.
Would be grateful for any direction on this.......simple as possible please, I am not a super wiz with this stuff. I would like to put something better than android 6 on the phone as long as it is a stable release
Best Regards, Chuck
Following this post, you device should be rescued.
https://forum.xda-developers.com/axon-7/development/axon-7-edl-tool-flash-backup-restore-t3750759
If your phone can not automatically boot into edl mode, then try follow method.
1) Power off your phone,
2) connect your phone to PC with a USB cable while holding hold vol up and vol down at same time.
here2for said:
Background....wanted to upgrade from 6 to 8 so went through the process using miflash and one of TurkDevs packages (A2017V3.0.0B01-2_FULL_EDL_PACKAGE_BY_TURKDEVS).
Everything installed ok but the package was kind of 1/2 Chinese so I removed it. Have been trying to install another package but with no luck so far.
When I tried other pkgs I was getting a message that the device state was locked....used AXON_7_BOOTLOADER_UNLOCK_IMAGES_BY_TURKDEVS to unlock device ....worked fine
Current state - When device powers up it goes directly into bootloader and has the following info : fastboot mode
Product name: AILSA_II
Variant - MTP eMMC
Bootloader version - blank
Serial number - 8fb6f15
Secure Boot - Enabled
Device - Unlocked
Device will toggle between bootloader and recovery mode.
In my Device Manager it recognizes the phone as "Android bootloader interface" but has dropped the Qualicomm 9008 usb driver.
Would be grateful for any direction on this.......simple as possible please, I am not a super wiz with this stuff. I would like to put something better than android 6 on the phone as long as it is a stable release
Best Regards, Chuck
Click to expand...
Click to collapse
Thanks for reply but link is 404...pls resend tks
:::::::::::::::::::::
https://forum.xda-developers.com/axon-7/development/axon-7-edl-tool-flash-backup-restore-t3750759
further....
hi, followed link and d/l the EDL tool. When I run it it looks for the phone but cannot find. In my device manager it shows Android phone>Android Bootloader Interface but no QC 9008 port. If I run ADB it cannot find device either. When I power my phone it goes right into boot loader...I can toggle to recovery and try to run a package from SD card but it will run but generates error "footer is wrong".....thoughts ??
Run command： fastboot devices
If you device show up, then you can flash twrp by command
fastboot flash recovery "path"/"twrp file name".img
here2for said:
hi, followed link and d/l the EDL tool. When I run it it looks for the phone but cannot find. In my device manager it shows Android phone>Android Bootloader Interface but no QC 9008 port. If I run ADB it cannot find device either. When I power my phone it goes right into boot loader...I can toggle to recovery and try to run a package from SD card but it will run but generates error "footer is wrong".....thoughts ??
Click to expand...
Click to collapse
mmm...progress, got twrp to load. I see that the oreo 8.1 upgrade is available , will try to load it on. Let you know if any hiccups. tx for the help so far !!!
....tried to install a couple different roms (placed them on the SD card) twrp....begins to install but then generates the error - "zip signature verification failed" ?? have tried resurrection remix and aokp nougat for axon 7.... get same error. Thoughts please
you are welcome.
Once your twrp is loaded, you device is definitely rescued.
first, install latest twrp3.2.1.7 img from twrp, if it is not the latest.
then format data, and wipe everything, then copy modded latest stock rom zip file and corresponding bootstack, magisk16.4, to sd card if it can be mounted, or to internal storage otherwise.
Install bootstack, latest modded stock rom, magisk 16.4, factory reset, and restart.
here2for said:
mmm...progress, got twrp to load. I see that the oreo 8.1 upgrade is available , will try to load it on. Let you know if any hiccups. tx for the help so far !!!
Click to expand...
Click to collapse
llaalways said:
you are welcome.
Once your twrp is loaded, you device is definitely rescued.
first, install latest twrp3.2.1.7 img from twrp, if it is not the latest.
then format data, and wipe everything, then copy modded latest stock rom zip file and corresponding bootstack, magisk16.4, to sd card if it can be mounted, or to internal storage otherwise.
Install bootstack, latest modded stock rom, magisk 16.4, factory reset, and restart.
Click to expand...
Click to collapse
llaalways... thank you for the help with this, much appreciated. In your last reply are you referring to 3 files ( rom, bootstack and magisk16.4 ) ? if so which rom and bootstack would you suggest....
Tx Chuck
which model is your phone? A2017U, A2017G, or A2017?
here2for said:
llaalways... thank you for the help with this, much appreciated. In your last reply are you referring to 3 files ( rom, bootstack and magisk16.4 ) ? if so which rom and bootstack would you suggest....
Tx Chuck
Click to expand...
Click to collapse
I suggest stock rom, you can follow this post to flash it.
https://forum.xda-developers.com/axon-7/development/rom-guide-updates-to-stock-files-via-t3469484
llaalways said:
which model is your phone? A2017U, A2017G, or A2017?
Click to expand...
Click to collapse
axon 7 almost bricked....
here2for said:
llaalways... thank you for the help with this, much appreciated. In your last reply are you referring to 3 files ( rom, bootstack and magisk16.4 ) ? if so which rom and bootstack would you suggest....
Update - was able to install DrakenFX bootloader and stock system with TWRP. Did the install with no errors and both showed successful.
Now when I reboot or power on the phone it boots directly into fastboot. From there I can load recovery which goes to TWRP. How can I get it to boot properly into the OS?
Thank you, Chuck
Click to expand...
Click to collapse
Do not forget install Magisk16.4 after install ROM.
And try factory reset and then reboot disemmcwp.
If there is still problem, try format data again.
here2for said:
here2for said:
llaalways... thank you for the help with this, much appreciated. In your last reply are you referring to 3 files ( rom, bootstack and magisk16.4 ) ? if so which rom and bootstack would you suggest....
Update - was able to install DrakenFX bootloader and stock system with TWRP. Did the install with no errors and both showed successful.
Now when I reboot or power on the phone it boots directly into fastboot. From there I can load recovery which goes to TWRP. How can I get it to boot properly into the OS?
Thank you, Chuck
Click to expand...
Click to collapse
Click to expand...
Click to collapse