Hi everyone, I'm new to this forum.
I purchased a Moto X Play a couple of days back, everything was working fine till today morning when I was struggling with getting 3g network on 4G/3G preferred mode. I decided to change the preference in phone setting using*#*#3646#*#*.
Upon trying different options it remained stuck to gsm only mode, so I tried clicking "turn radio off" a few times which would make the signal go and come back in a few seconds but suddenly I lost network in sim 1 and have been trying everything for last couple of hours but won't get the signal back. I even tried swapping the sims and using a different sim but network in slot 1 is still off the radar. In the sim setting the phone would show the sim but there is no network. Any help in this regard will be highly appreciated.
Thanks
Asgar
lastweek i faced same problem.
It is caused by selecting us band
you can just flash modem and it will recover.
modem file is in this forum. you can find it easily
Thanks for the reply. Can you please share the link to the file? Also please tell me if it will void the warranty as I've the option of replacing this piece.
http://forum.xda-developers.com/moto-x-play/help/modem-file-t3255312
get modem.bin file at this page, and flash it.
fastboot flash modem modem.bin
fastboot erase modemst1
fastboot erase modemst2
I'm not sure but you don't have to unlock your bootloader for this process, so your warranty will be ok. i think.
Do I need a pc for this process or it can be done on phone itself? Can u plz share some step by step tutorial as I am a novice. Also please tell me if there is some simple method to do this without using a pc.
Update: the ROM in above link is for single sim model while mine is a dual sim model.
Hi all,
A strange thing happen to me, my Zuk Z1 ran out of battery and I've put it to charge and when I boot it up again it kept boot looping.
My Zuk Z1 is the international version and I have tried all of the below solutions
Clear all caches and media - No luck
Use QFIL with original rom - No luck keeps boot looping and most of the times gives an error at the very end of the QFIL ( Download Failed QDloader .... )
Used QFIL with ZUI rom - Works but most of the functions don't work, no wifi, bluethooh and so on
Erased sdl1 with fastboot ( that made the phone to seem dead, had to open it and remove the battery in order to be able to install QFIL rom again )
ADB sideload, stops at 47% everytime and the phone reboots and keeps doing the boot loop.
I can get ADB and Fastboot working but I'm running out of ideas!
Also I was thinking on rooting the phone to allow me to install Cyanogenmod to see if it works but don't know how to achieve this, Kingroot needs internet and I have no way of getting it to work.
Any idea would be very welcome !
Thanks
UPDATE:
I was able to flash TWRP and CYANOGENMOD 13, it boots but its the same as in ZUI, no wifi or bluetooth, I'm guessing it was the motherboard that fried !? The mac address displayed on the WLAN is 02:00:00:00:00:00 and i've tried several options in developer mode which didn't work.
Click to expand...
Click to collapse
Hi everyone!
I have bougth a Redmi Pro on Gearbest and it came with Chinese/English Version of MIUI.
After a week of usage, i turned off my xiaomi and when i turned back on, it stucked on a Mi logo. Far as i discovered searching on web, it was a bug that other peopel have reported too.
I took a opportunity of having this bug to fix, to put other rom on the phone. A rom with Portuguese language witch is my mother lang.
I tried to put the new rom via "SP Flash took" with the fastboot mod but without success.
I requested the unlocking on Xiaomi Unlocking site and when they repplyed and i connected the xiaomi to the computer, the program (XiaomiMiFlash) gave me an error message telling ""Couldn´t verify device. Current account is diferent from the account info in the device"
No i can´t do nothing with the phone.
Can you guys have some idea how can i solve this?
Thank you all!
There is a good chance that the phone is already unlocked.
What was the problem with fastboot? Maybe drivers issue?
Have you tried flashing TWRP? If it takes then the phone is unlocked and you can proceed with flashing the xiaomi.eu or globerom.
kremmit said:
There is a good chance that the phone is already unlocked.
What was the problem with fastboot? Maybe drivers issue?
Have you tried flashing TWRP? If it takes then the phone is unlocked and you can proceed with flashing the xiaomi.eu or globerom.
Click to expand...
Click to collapse
Tks 4 the support!
About the Fastboot i putted the phone on fastboot mode and i disabled the Driver Signature Enforcement on Windows. I connected the phone to the computer and started to run the SP Flash Tool. After the process was completed it wont gave me any result because the phone still stucked on Mi logo..
I did'n tried the TWRP because in every tutorial tells me that i need to go to the Developer Mode and activate the USB debugging i can not access to that because the phone don't give me more than the Mi logo.
hmm the fastboot method should have worked. Have you tried it on another computer, maybe 32bit windows?
When finished flashing with miflash in fastboot did it say it was ok at the end or did it give you an error? Als tried to reboot a few times after flashing without usb cable in the phone?
kremmit said:
hmm the fastboot method should have worked. Have you tried it on another computer, maybe 32bit windows?
When finished flashing with miflash in fastboot did it say it was ok at the end or did it give you an error? Als tried to reboot a few times after flashing without usb cable in the phone?
Click to expand...
Click to collapse
Im losing my mind!
I tried again in my father's desktop wich have a 64bit windows 7 (I havent a 32 bit at home. I will try to get one borrowed)
I tried with the SP Flash Tool following a guide from "xiaomitips" and, in this computer, the program dornt even recognize my phone. I push the Download button but that give me no signal.
Is there any other way to do this? Other ways to put the rom in the phone? (Sorry the noob language)
franciscobcl said:
Im losing my mind!
I tried again in my father's desktop wich have a 64bit windows 7 (I havent a 32 bit at home. I will try to get one borrowed)
I tried with the SP Flash Tool following a guide from "xiaomitips" and, in this computer, the program dornt even recognize my phone. I push the Download button but that give me no signal.
Is there any other way to do this? Other ways to put the rom in the phone? (Sorry the noob language)
Click to expand...
Click to collapse
I'm out of ideas at this point.
I had some trouble with fastboot that my phone did restart when in fastboot mode.
Then i had to change the order of plugging in the cable and starting the program but after that all worked.
No idea what next ...
I had this issue with a Redmi 3. I can't remember the exact solution but I believe you have to have the developer ROM installed in order to unlock the bootloader. Maybe if you search for an anterior model such as the Redmi 3 you will find more information on how to load your ROM. I'm sure that it's the same method for most Xiaomi phones. Good luck!
I heard about do a Hard Reset but i dont know how to do that because i cant access to the OS of the xiaomi.
Is there a way to do a hard reset with the xiaomi stucked on Mi logo?
Tks!
Happy 2017 for all!
I tried to put my phone one Recovery Mode but it is blocked. Its like the phone on this video:
https://www.youtube.com/watch?v=tTzdQpex7BQ
How can i unlock this?
I never could get into the xiaomi recovery either but i managed to flash twrp through fastboot though.
franciscobcl said:
Tks 4 the support!
About the Fastboot i putted the phone on fastboot mode and i disabled the Driver Signature Enforcement on Windows. I connected the phone to the computer and started to run the SP Flash Tool. After the process was completed it wont gave me any result because the phone still stucked on Mi logo..
I did'n tried the TWRP because in every tutorial tells me that i need to go to the Developer Mode and activate the USB debugging i can not access to that because the phone don't give me more than the Mi logo.
Click to expand...
Click to collapse
Hi
Does your problem with sp flashtools and flashing the ROM be solved ?
Sent from my Redmi Pro
I had this problem, but I'd installed TWRP already. But you shouldn't need USB Debugging on to flash TWRP. If you manage to flash TWRP, flash a new ROM (I recommend xiaomi.eu (I think they have Portuguese)) and wipe the Dalvik cache, /cache, and /data (you probably won't have to wipe /data/media).
Miui themes
Sorry will start new item
Have you tried a different cable, that is why mine wasn't recognized at first.
I'm having the same problem here. The phone rebooted itself when I changed the locale, and hung at the Mi logo. I already had TWRP flashed. I also took the opportunity to install a new ROM; the Global Dev ROM. It installed with no errors and I wiped the Dalvik, cache, etc. Still hangs at the Mi logo, but this time without the little loading dots at the bottom. Any suggestions?
Update: I can bring it back to the original state with the loading dots and "powered by Android" at the bottom with a backup I took before flashing the new rom, but still no progress.
I managed to restore my phone using the video:
Flash Xiaomi Redmi Pro Using SP Flash Tool [Locked Bootloader]
I can't post links since I don't have enough posts here yet, but search for it on Youtube.
Update: It seems like the unlocking permissions on my account have been retroactively rejected, I wonder if that has something to do with it. I also can't seem to find the Global ROM for the Redmi Pro anymore, just the China one. Does anyone have a link for the official Global ROM on the Xiaomi site?
Update 2: Suddenly I have unlock permission again, without reapplying, so that's cool. I installed the Eu HMPro ROM, everything's working well so far.
Phosphenes said:
I managed to restore my phone using the video:
Flash Xiaomi Redmi Pro Using SP Flash Tool [Locked Bootloader]
I can't post links since I don't have enough posts here yet, but search for it on Youtube.
Update: It seems like the unlocking permissions on my account have been retroactively rejected, I wonder if that has something to do with it. I also can't seem to find the Global ROM for the Redmi Pro anymore, just the China one. Does anyone have a link for the official Global ROM on the Xiaomi site?
Update 2: Suddenly I have unlock permission again, without reapplying, so that's cool. I installed the Eu HMPro ROM, everything's working well so far.
Click to expand...
Click to collapse
What I did bro ?
I still have the same problem?
franciscobcl said:
Hi everyone!
I have bougth a Redmi Pro on Gearbest and it came with Chinese/English Version of MIUI.
After a week of usage, i turned off my xiaomi and when i turned back on, it stucked on a Mi logo. Far as i discovered searching on web, it was a bug that other peopel have reported too.
I took a opportunity of having this bug to fix, to put other rom on the phone. A rom with Portuguese language witch is my mother lang.
I tried to put the new rom via "SP Flash took" with the fastboot mod but without success.
I requested the unlocking on Xiaomi Unlocking site and when they repplyed and i connected the xiaomi to the computer, the program (XiaomiMiFlash) gave me an error message telling ""Couldn´t verify device. Current account is diferent from the account info in the device"
No i can´t do nothing with the phone.
Can you guys have some idea how can i solve this?
Thank you all!
Click to expand...
Click to collapse
You could try dowloading the official rom and then download the CHINESE version of mipc suite then enter fastboot and connect the phone
Normally the chinese mi pcsuite automaticly detects the phone is in fastboot mode, you could use google translate to translate it all just choose redmi pro on model selector (the top selection bar)the text there is untranslateable just choose the one that says pro
And then under it chose the one that translate to chinese
After That there's two tick box under it, choose the ROM you downloaded
After that chose the one that translate to install brush package, if it doesn't work choose the download brush package next to it
Thus method worked for me when my phone bricked hope it helps you
I have lenova a6000 8 gb black phone
I have problem when i went to do factory reset because of network problem.but it stuck on erasing screen and moght be goes in loop as its shows erasing screen frequntly and cant start any mode or normal os.what should i do. I tried to connect to pc but it was never detected in any pc .
Give solution
Hear is link for problem video
Youtu.be/sTajWR7OV6Y
mrohb12 said:
I have lenova a6000 8 gb black phone
I have problem when i went to do factory reset because of network problem.but it stuck on erasing screen and moght be goes in loop as its shows erasing screen frequntly and cant start any mode or normal os.what should i do. I tried to connect to pc but it was never detected in any pc .
Give solution
Hear is link for problem video
Youtu.be/sTajWR7OV6Y
Click to expand...
Click to collapse
Did you installed drivers for your lenovo a6000 In your PC.
If no install driver and install twrp and erase your data
Still problem remaining
Yess i have installed lenoa usb driver for this mpbile but its not detected even in device manager also.
I have also ttied using port setting but still problem remaining.
Can u say another method to detection
mrohb12 said:
I have lenova a6000 8 gb black phone
I have problem when i went to do factory reset because of network problem.but it stuck on erasing screen and moght be goes in loop as its shows erasing screen frequntly and cant start any mode or normal os.what should i do. I tried to connect to pc but it was never detected in any pc .
Give solution
Hear is link for problem video
Youtu.be/sTajWR7OV6Y
Click to expand...
Click to collapse
I am really sorry to hear about what's happened.
You may consider flashing the stock ROM of your Lenovo A6000 to resolve the issue.
If you prefer the KitKat ( Which I highly recommend. I tried all kinds of Custom ROMs for years but now I am back to the stock, it's the best and the most compatible for our device. ), you can download the package from the link given below. All the tools needed are there including the instructions.
Code:
http://www.mediafire.com/file/vlw8t6yv0jzay1b/Lenovo_A6000_S040_150805_8G_ROW_by.reda%40gem-flash.com.zip
However, if you wish to flash Lollipop stock ROM which has many bugs, you can download the other package below. It also includes instructions and tools needed.
Code:
http://www.mediafire.com/file/dhwu78g9llbv133/Lenovo_A6000_S062_Q102113_20161223.zip
If you are still having problems, please let me know. I may be able to help you further.
Regards,
xda_borj
Hi!
I tried to flash a Stock Rom (June) via Myflash, and after the process the phone booted into a message saying "System is destroyed", The bootloader was locked after that and myflash couldn't flash the phone again.
I did the testpoint and finally myflash is recognizing the phone as a COM device, i flashed a lot of stock roms but with all im facing the same problem, after the flash, the phone stays in black screen and only vibrates when i press the power button.
If i try to connect the phone into the pc, the phone starts vibrating but nothing else happen.
I tried with the unbrick tool by cosmic dan and with the QFIL app, and everytime that a flash is successful, the phone again only vibrates when i try to power on.
Do you guys know, which rom do i need for this kind of flash? do i have other solution? (Colombia doesnt have an official Xiaomi store so i cannot take it there. to fix it)
Thanks
maybe your EMMC is faulty
i don't know if there is a free tool for this but when a customer phone comes with such this problem i will erase whole EMMC with MEDUSA PRO and flash it again to be sure that there is no problem but EMMC
emprazol said:
maybe your EMMC is faulty
i don't know if there is a free tool for this but when a customer phone comes with such this problem i will erase whole EMMC with MEDUSA PRO and flash it again to be sure that there is no problem but EMMC
Click to expand...
Click to collapse
I will try with this one, "EMMCDLTOOL" that it seems to be free and do the same thing as the Medusa Pro
Thank you for your reply, really.
I tried to erase the EMMC and that didn't work. So i'm still locked and with a black screen with vibration.
Strange, maybe partitions got corrupted, but I dont know how to fix them back.
TrueMS said:
Strange, maybe partitions got corrupted, but I don't know how to fix them back.
Click to expand...
Click to collapse
I was thinking the same thing... And i'm right now searching how to built the partitions again...
i had the same problem and i used the TOOL ALL IN ONE to unlock the boot loader and access the twrp erease all data systeam internal everything and than i used miflash tool to flash the latest stock frimware and i fixed my mi a1 im not that good with the English but i think you will understand me if not contact me
nenad96 said:
i had the same problem and i used the TOOL ALL IN ONE to unlock the boot loader and access the twrp erease all data systeam internal everything and than i used miflash tool to flash the latest stock frimware and i fixed my mi a1 im not that good with the English but i think you will understand me if not contact me
Click to expand...
Click to collapse
hey, I'm having the same difficulty, maybe I'll try this method.
Do I have to be with Active Debugging Mode? because mine is not and I can not change it.