Database Users

[Q] I Soft bricked my yu yureka,plz help!

Dear sir,
i tried to factory reset my phone and when phone rebooted YU logo shown up but after that nothing happened ,it didn't load up,black screen,shut down again.(SOFT BRICK).
i tried many attempts to install stock recovery using fast boot mode,but in cmd it ends up showing waiting for device.
i think usb debugging was disabled,that's why it is showing waiting for devices,and hence i cannot install stock recovery and reboot my phone. So is there any way to fix "waiting for device" ,is there any way to enable usb debugging even if i cannot start my phone . I need your your help ASAP.

3skanurag said:
Dear sir,
i tried to factory reset my phone and when phone rebooted YU logo shown up but after that nothing happened ,it didn't load up,black screen,shut down again.(SOFT BRICK).
i tried many attempts to install stock recovery using fast boot mode,but in cmd it ends up showing waiting for device.
i think usb debugging was disabled,that's why it is showing waiting for devices,and hence i cannot install stock recovery and reboot my phone. So is there any way to fix "waiting for device" ,is there any way to enable usb debugging even if i cannot start my phone . I need your your help ASAP.
Click to expand...
Click to collapse
yes it is soft brick. i face same problem. but make sure your pc has successfuly installed adb drivers.
if drivers are not working so you will see waiting for device.

It is fixed now i used pdanet+ then adb then flashed cm recovery then removed battery and plugged in and then it started.

3skanurag said:
It is fixed now i used pdanet+ then adb then flashed cm recovery then removed battery and plugged in and then it started.
Click to expand...
Click to collapse
i have solution for soft brick. download fast boot stock images and follow procedure.
Link for fastboot rom
Link for tool and guide in this link you will see procedure also just scroll down in this page

ashish_zarekar said:
i have solution for soft brick. download fast boot stock images and follow procedure.
Link for fastboot rom
Link for tool and guide in this link you will see procedure also just scroll down in this page
Click to expand...
Click to collapse
i tried the method you mentioned following this guide
http://www.thetechnotriad.com/326/ho...oot-yu-yureka/
the phone is working good the only major problem whatsapp is not opening...when clicked opens for 0.01 sec and returns back to previous screen (flashes) ....please somebody help me with this. Thanks in Advance.

lenovo a6000 softbrick

guys i have softbricked my lenovo a6000 and its stucked on lenovo logo
i have tried adb method to flash back recovery mode but when i rum commands it gives error == device null found
when i connect my device to pc it makes an connected sound help me out of this as this is the only mobile i was having
plzzzzzzzzzz guyzzhelp me out

Bro need help I installed twrp and then cm 13 on my a6000 and by mistake I deleted backup of my stock kk rom and now when I try to go in download mode, recovery it doesn't open it show only Lenovo logo . By mistake I flashed a6000+ stock recovery and after that when I try to flash stock recovery of a6000 using adb nothing open .. so now nothing download mode or recovery mode is opening but i still boot into cm13 how solve it to revert back to kk ?

Solution
Shubhamraaj said:
guys i have softbricked my lenovo a6000 and its stucked on lenovo logo
i have tried adb method to flash back recovery mode but when i rum commands it gives error == device null found
when i connect my device to pc it makes an connected sound help me out of this as this is the only mobile i was having
plzzzzzzzzzz guyzzhelp me out
Click to expand...
Click to collapse
I had also stuck in boot logo once in a custum ROM .
but i fixed it : steps .
Download twrp recovery in your pc. ( rename it as twrp.img ) ,
Boot your phone in to fastboot mode .,
Make sure ur pc has ADB drivers ,
Once , phone get into fastboot mode ,
Type this Commands : 1)fastboot devices ( to check if ur phone is getting detected or not , if it shows no device found , check connection )
2) fastboot flash recovery twrp.img ( to flash recovery)
3) fastboot reboot recovery ( to boot into recovery )
4) download any ROM to SD card and flash it from recovery.
Hit thanks button if this helped you.

Hello guys I have a6000 (Lenovo)
But my problem I saw this video
. Which is easy to revert back to kk rom but I have installed twrp which is not useful for above video method .so when I try to to install Philly or cwm which is used in above video it not installing only twrp will installing other custom recoveries not installing so please help me!!! If anybody have the twrp backup of stock kk rom of a6000 please send me!!

My lenovo a6000 also got stock on boot logo in a custom rom. Its now in no use. Now when i try to connect ut to my pc, its only charging. My device is not being connected to pc. Now what to do ??

Androidsabya said:
My lenovo a6000 also got stock on boot logo in a custom rom. Its now in no use. Now when i try to connect ut to my pc, its only charging. My device is not being connected to pc. Now what to do ??
Click to expand...
Click to collapse
FOLLOW THIS

Need help
sasukay said:
FOLLOW THIS
Click to expand...
Click to collapse
Actually 1st i did root my lenovo a6000. Then i was trying to install cyanogen rom through sd card. But it showed e verification failed. And while booting it gets stock showing cyanogen logo. I tried my phone to connect to pc, but it only charges my phone but doesn't show up in connected device in my laptop. I went to an mobile repair shop, bcoz i thought may be i was missing something. But after visiting 3 repair shops, they also couldn't solve my problem. Now how can i get my mobile to back condition ? Need help. If anyone can help plz give quick rply. But i need to talk to someone who can help regarding this issue. So if you can talk to me, plz call me 7008678740. Thank. Plz give response.

New problem arrised
sasukay said:
FOLLOW THIS
Click to expand...
Click to collapse
I could successfully restored my lenovo a6000 kitkat rom. But a new problem arrised. When i try to power on, it just starts for 2 seconds and vanishes immediately just showing the lenovo logo. Again n again it just being on and off. When i put this battery in another a6000 plus mobile, the same problem occurs. I mean , i want to know why is this happening ? Is the battery gone !!!

Androidsabya said:
I could successfully restored my lenovo a6000 kitkat rom. But a new problem arrised. When i try to power on, it just starts for 2 seconds and vanishes immediately just showing the lenovo logo. Again n again it just being on and off. When i put this battery in another a6000 plus mobile, the same problem occurs. I mean , i want to know why is this happening ? Is the battery gone !!!
Click to expand...
Click to collapse
On first look, it seems like your phone is in bootloop and you need to flash new ROM after wiping the partitions correctly. But, then you are saying that same thing is happening when you insert this battery in another A6000. I think your battery has gone rogue due to some virus, just throw it away. Jokes apart, if another device is showing same behaviour then its almost 100% sure, that your battery has issues and need to be replaced. And, why don't you actually check switching on your phone by putting the battery from that another A6000 into your A6000.

I have checked with another battery, my phone works fine. But that particular battery is doing only on off continuously. But #important thing is , i don't think the battery has gone. Bcoz during the on off process, if i press volume down key, it shows lenovo logo and gets stock there. If the battery has problem, then how can be it stays on showing the logo ?? Confused ???

Hard Brick / Soft Brick ? Help

Hi all,
A strange thing happen to me, my Zuk Z1 ran out of battery and I've put it to charge and when I boot it up again it kept boot looping.
My Zuk Z1 is the international version and I have tried all of the below solutions
Clear all caches and media - No luck
Use QFIL with original rom - No luck keeps boot looping and most of the times gives an error at the very end of the QFIL ( Download Failed QDloader .... )
Used QFIL with ZUI rom - Works but most of the functions don't work, no wifi, bluethooh and so on
Erased sdl1 with fastboot ( that made the phone to seem dead, had to open it and remove the battery in order to be able to install QFIL rom again )
ADB sideload, stops at 47% everytime and the phone reboots and keeps doing the boot loop.
I can get ADB and Fastboot working but I'm running out of ideas!
Also I was thinking on rooting the phone to allow me to install Cyanogenmod to see if it works but don't know how to achieve this, Kingroot needs internet and I have no way of getting it to work.
Any idea would be very welcome !
Thanks
UPDATE:
I was able to flash TWRP and CYANOGENMOD 13, it boots but its the same as in ZUI, no wifi or bluetooth, I'm guessing it was the motherboard that fried !? The mac address displayed on the WLAN is 02:00:00:00:00:00 and i've tried several options in developer mode which didn't work.
Click to expand...
Click to collapse

dead lenovo A6000

today in the morning i tried to flash lollipop custom rom on my lenovo A6000 through qcom Dloader . everything just went fine even flashing was complete but when i removed the usb cable and tried to reboot it.... nothing
screen was totally black,so i removed the battery and tried to reboot it.Still nothing,no boot logo or vibrations just a black screen...
any help from u guys would be appreciated..please help me

Jarvis_official said:
today in the morning i tried to flash lollipop custom rom on my lenovo A6000 through qcom Dloader . everything just went fine even flashing was complete but when i removed the usb cable and tried to reboot it.... nothing
screen was totally black,so i removed the battery and tried to reboot it.Still nothing,no boot logo or vibrations just a black screen...
any help from u guys would be appreciated..please help me
Click to expand...
Click to collapse
You can still revive it using QFIL only. READ IT HERE.
And btw why didn't you just flashed the rom from twrp. Its much much simpler than the method you used.

i tried that bro but using QFIL it gives an error.
Thanks though

Jarvis_official said:
i tried that bro but using QFIL it gives an error.
Thanks though
Click to expand...
Click to collapse
Can anyone help me for my lenovo mobile. It too gives me a weird error. Cannot open and read raw file. pls check if it exists

Bricked phone, won't turn on/fastboot/recovery

So yeah, I screw up by a lot, but let's see if someone can help me/
I tried to update twrp on my phone and it got bricked, ADB was not seeing the device but Mi FlashTool was with a code but not COM, tried changing the phone drivers brom 900E to QL8000 and it got registered by MiFlashtool as COM and another code, the phone was still showing there even if I could not make the phone go to fastboot mode, just blackscreen; I tried to reinstall stock rom with it but got stuck at "flashing", disconnected the phone, the phone was still bricked in a black screen, when trying to reconnect the phone again to the pc, Win10 now displays an error
https://imgur.com/a/VS1yh6t
,
https://imgur.com/a/4PxUD7E
, I already tried uninstalling the device, deleting and reinstalling the drivers (unable because for some reason they won't appear now, but already tried installing the from their 1st party and prom MiFlashTool), so the phone won't turn on, display anything, go into recovery/fastboot, and I don't know what to do now, is the phone lost? I hope you can help me with this issue.

Hello Bro. Try install latest Mi Flash Tool latest version and then install the drivers. For my it's works in windows 10.