Related
Model : SGP312
Android: 5.0.2
Market: Germany
Build : 1273-3719_10.6.A.0.454_R2E
Included:
- UPDATE-SuperSU-v2.46.zip
Rom is prerooted but XZDualRecovery isn't working for TabZ with Lollipop at the moment so it's not included, check this thread for news about it : http://forum.xda-developers.com/showthread.php?t=2261606
Flash this zip from 4.4.* recovery and you're done
https://mega.nz/#!YFlihZoa!qR87H4kkVdE9GEG5kkxJ59-EBlc6CdsimqKgNJRJoTw
Thanks a lot for this... Any chance to have and md5 so as to make sure it has been downloaded correctly?
botsaris said:
Thanks a lot for this... Any chance to have and md5 so as to make sure it has been downloaded correctly?
Click to expand...
Click to collapse
Sure : MD5 Sum is 2245197dac0a7388d7f2f2b3ae63c26a
Tried twice but its not booting.....
*justintime* said:
Tried twice but its not booting.....
Click to expand...
Click to collapse
For me everything went fine...First boot takes while.
I know first boot takes a while. But its not booting at all. Screen stays off and i can only enter fastboot. But never mind. I while take a different route
Does it work with locked Bootloader?
redsk1n said:
Does it work with locked Bootloader?
Click to expand...
Click to collapse
yes, it's stock rom with stock kernel
Confirmed working.
Thank you!
Problem...
I think I did something wrong.
Flashed in PhilZ, installation (Rom and SuperSU) worked fine.
Selected "Reboot now" afterwards.
Now it's dead.
Nothing on power on, no fastboot, no flashmode...any suggestions?
DatFrosty said:
I think I did something wrong.
Flashed in PhilZ, installation (Rom and SuperSU) worked fine.
Selected "Reboot now" afterwards.
Now it's dead.
Nothing on power on, no fastboot, no flashmode...any suggestions?
Click to expand...
Click to collapse
Try VOL+ Power to reset it.
Thanks!
That actually did the trick.
I guess the tablet was stuck in some sorta weird power-state.
Tried it once, but probably held the buttons down too shortly.
Managed to get it to flash once, the three times.
Got into flashmode from there, everything running fine on 5.0.2 stock atm.
I guess next step is to root it
Thanks again man.
DatFrosty said:
Thanks!
That actually did the trick.
I guess the tablet was stuck in some sorta weird power-state.
Click to expand...
Click to collapse
This happens if tablet hangs with screen off.
hi, currently i'm in jb 4.3 with cwm installed..
Can I upgrade directly via cwm? thanks!
duke_dreadmoore said:
hi, currently i'm in jb 4.3 with cwm installed..
Can I upgrade directly via cwm? thanks!
Click to expand...
Click to collapse
Yes you can. But this ROM on 1st post doesn't contain recovery, so you will have to install .zip with it via CWM too.
Hi everyone.
Can I update from official kitkat with this rom?
My device is rooted but that's all. No recovery or unlocked bootloader. SGP311.
If it's possible how can I do that? Can I keep my data and apps?
Thanks.
bobo1425 said:
Hi everyone.
Can I update from official kitkat with this rom?
My device is rooted but that's all. No recovery or unlocked bootloader. SGP311.
If it's possible how can I do that? Can I keep my data and apps?
Thanks.
Click to expand...
Click to collapse
without root and recovery no way to update.
Can anyone post a new link to the zip file? Mega no longer is hosting the file
Thanks in advance.
Rassilon7 said:
Can anyone post a new link to the zip file? Mega no longer is hosting the file
Thanks in advance.
Click to expand...
Click to collapse
Hi, I should update my post with new build 10.7.A.0.22 (android 5.1.1) tomorrow
Thank you, that's very kind.
From the official Chinese support forum.
Credit goes to counter-stike
/Support flash and update of official rom.
/Support MTP
/Support disabling offical recovery
/Supported Models: E100X (All regional model, Onyx or Ceramic)
Must unlock bootloader and install proper ADB driver before flash.
Now enjoy root and custom rom!
Download Link (English Version)
Resolved!
Here is the english version repacked by me
https://www.dropbox.com/s/zypo7b41lvj0r2h/en-recovery-twrp-onyx-.img?dl=0
md5sum - 164519c4a50ea5e9c1244cd7aedf2c74
What is system image?
When I open the backup menu I get an option I've never seen before in other phones called "system image".
Could someone please explain to me what it contains? And is there a need to back this up?
How to flash ?
hey guys, just got my OnePlus X White version. it comes with H2OS and i wanna flash it to OxygenOS. I can't seem to get it working tho. any help please?
Sherwinnn said:
hey guys, just got my OnePlus X White version. it comes with H2OS and i wanna flash it to OxygenOS. I can't seem to get it working tho. any help please?
Click to expand...
Click to collapse
Simon posted a link with instructions here: http://forum.xda-developers.com/showpost.php?p=63718460&postcount=3
Savya said:
Beware! This Recovery is also in Chinese so its impossible to use for most of us. Maybe mention that too?
Click to expand...
Click to collapse
sorry for the inconvenience, updated the link to English version.
can someone dump system.img and boot.img?
Sherwinnn said:
hey guys, just got my OnePlus X White version. it comes with H2OS and i wanna flash it to OxygenOS. I can't seem to get it working tho. any help please?
Click to expand...
Click to collapse
1. Taking threads off-topic is against forum rules. This thread is about TWRP recovery.
2. Double posting is against forum rules.
http://forum.xda-developers.com/oneplus-x/help/h2os-to-oxygenos-t3243838
Can someone confirm this as working?
Should i rather wait for official twrp?
I have had old phones quite a while now and being a bit causious because i usually don´t spend 300€ to a phone.
Fatsodonkey said:
Can someone confirm this as working?
Should i rather wait for official twrp?
I have had old phones quite a while now and being a bit causious because i usually don´t spend 300€ to a phone.
Click to expand...
Click to collapse
Take a look in the rooting thread.
Mirror links:
Original TWRP by @qwsdert4 -- MIRROR
English repacked by @ukanth -- MIRROR
ckret said:
can someone dump system.img and boot.img?
Click to expand...
Click to collapse
Found OTA (looks like full) from some tutorial which has boot.img and full system dump
http://pan.baidu.com/s/1hq98Uoc
hey, so i just flashed this TWRP recovery and i managed to boot into TWRP recovery. But, whenever i click the 'Reboot' option or 'Power Off' option, the TWRP just stays right there and it won't even reboot or power off. I have to hold down the power button to turn off the phone and power it back. Any ideas why this is happening and anything that i've done wrong in the process?
Sherwinnn said:
hey, so i just flashed this TWRP recovery and i managed to boot into TWRP recovery. But, whenever i click the 'Reboot' option or 'Power Off' option, the TWRP just stays right there and it won't even reboot or power off. I have to hold down the power button to turn off the phone and power it back. Any ideas why this is happening and anything that i've done wrong in the process?
Click to expand...
Click to collapse
Its a Bug, i guess same is happening with everyone. We just have to wait for official TWRP. and also
Bug Till NoW
Extra Option Named System partition Under Backup, Which has no Function and Doesn't Work.
Cant reboot/power off from recovery as it just freezes the recovery.
OTG doesn't work in Recovery.
TWRP gets replaced with Stock recovery after each Boot.
N_lover27 said:
Its a Bug, i guess same is happening with everyone. We just have to wait for official TWRP. and also
Bug Till NoW
Extra Option Named System partition Under Backup, Which has no Function and Doesn't Work.
Cant reboot/power off from recovery as it just freezes the recovery.
OTG doesn't work in Recovery.
TWRP gets replaced with Stock recovery after each Boot.
Click to expand...
Click to collapse
can you dump boot.img for me?
just make a backup with twrp if its working
this way we can build a working twrp version
ckret said:
can you dump boot.img for me?
just make a backup with twrp if its working
this way we can build a working twrp version
Click to expand...
Click to collapse
here u go
N_lover27 said:
here u go
Click to expand...
Click to collapse
thanks.
its weird though.. when i unpack the boot.img it misses some files...
ckret said:
thanks.
its weird though.. when i unpack the boot.img it misses some files...
Click to expand...
Click to collapse
try this one mate..
my moto x play is stuck in boot loop m not able to downgrade it on 5.1 and cant upgrade to 6.0(because there is no 6.0 stock file on air still)
my question is is there any way to enable usb debugging and allow oem unlock via fast boot cmds.?
because if there is a way to unlock boot lodear to i can install twrp recovery.
please help me
http://lmgtfy.com/?q=fastboot+allow+usb+debugging
http://android.stackexchange.com/qu...ndroid-if-forgotten-pattern-for-screen-unlock
Nico3d3 said:
http://lmgtfy.com/?q=fastboot+allow+usb+debugging
http://android.stackexchange.com/qu...ndroid-if-forgotten-pattern-for-screen-unlock
Click to expand...
Click to collapse
unfortunately not working for me.
http://android.stackexchange.com/qu...ndroid-if-forgotten-pattern-for-screen-unlock
If the instructions are too technical for you and you can't figure out how to make it happen, following the tutorial, then I'm afraid I'll have a hard-time helping you unless I have the phone in my hand. Unfortunately, hacking phone is a process where we learn from our mistakes. I had a few times where I almost bricked my then new to me Samsung Galaxy SIII, but then I searched the Internet trying and trying again until I understood how do to thing to get it back to work.
Maybe, try to flash TWRP temporarily, you should at least give it a shot:
fastboot boot TWRP-lux-2.8.7-r4.img
Click to expand...
Click to collapse
I'm pretty sure it will work even if your bootloader is locked because it just install it temporarily. You execute the flashboot command, then you navigate the option on the phone until you see the option "Reboot recovery". It will reboot in TWRP recovery, then you could use the interface to install this recovery backup of Marshmallow. Instructions on how to install the recovery backup in TWRP, are here.
Nico3d3 said:
http://android.stackexchange.com/qu...ndroid-if-forgotten-pattern-for-screen-unlock
If the instructions are too technical for you and you can't figure out how to make it happen, following the tutorial, then I'm afraid I'll have a hard-time helping you unless I have the phone in my hand. Unfortunately, hacking phone is a process where we learn from our mistakes. I had a few times where I almost bricked my then new to me Samsung Galaxy SIII, but then I searched the Internet trying and trying again until I understood how do to thing to get it back to work.
Maybe, try to flash TWRP temporarily, you should at least give it a shot:
I'm pretty sure it will work even if your bootloader is locked because it just install it temporarily. You execute the flashboot command, then you navigate the option on the phone until you see the option "Reboot recovery". It will reboot in TWRP recovery, then you could use the interface to install this recovery backup of Marshmallow. Instructions on how to install the recovery backup in TWRP, are here.
Click to expand...
Click to collapse
brother another think is that when m on recovery mode and click on apply update from sdcard its shows (Internal and external memory cannot be mounted)
i think my sdcard storege is corrupted m not able to right any thing. and i had already tried that twrp recovey Method witch is not work for me may be tha resasion is corrupte memory.
here is the result
I really want to know why people flash soak tests without unlocking the bootloader? Do they really know what they are doing?
treibstoff said:
I really want to know why people flash soak tests without unlocking the bootloader? Do they really know what they are doing?
Click to expand...
Click to collapse
m also asking same qustion to me
ok do you have any idea when the stock firmware will be on air..?
anujanuj said:
m also asking same qustion to me
ok do you have any idea when the stock firmware will be on air..?
Click to expand...
Click to collapse
No unfortunetly not... You have to wait ...
anujanuj said:
m also asking same qustion to me
ok do you have any idea when the stock firmware will be on air..?
Click to expand...
Click to collapse
Try these commands only
fastboot erase cache
fastboot erase userdata
fastboot reboot
effingbadluck said:
Try these commands only
fastboot erase cache
fastboot erase userdata
fastboot reboot
Click to expand...
Click to collapse
already did via manual via recovery mode
any way to format my phone memory not clear data i mean format full drive may be then i can flash 5.1 again
anujanuj said:
already did via manual via recovery mode
any way to format my phone memory not clear data i mean format full drive may be then i can flash 5.1 again
Click to expand...
Click to collapse
Do it this time using fastboot commands.It's worth a try
anujanuj said:
already did via manual via recovery mode
any way to format my phone memory not clear data i mean format full drive may be then i can flash 5.1 again
Click to expand...
Click to collapse
Hi anuj if you are using indian moto x play then try to flash this one. It will help you
http://www.filefactory.com/file/6jg...23.118-32_cid7_subsidy-DEFAULT_CFC_v2.xml.zip
umair deshmukh said:
Hi anuj if you are using indian moto x play then try to flash this one. It will help you
http://www.filefactory.com/file/6jg...23.118-32_cid7_subsidy-DEFAULT_CFC_v2.xml.zip
Click to expand...
Click to collapse
der umair can i have the alternative link of this because file fectory didnt provide resume links
and
still i had tried these roms
1. X_Play_Retail_India_XT1562_LPD23.118-10_CFC.xml
2.XT1562_LUX_RETASIA_DS_5.1.1_LPD23.118-12_cid7_subsidy-DEFAULT_CFC.xml.zip
3.XT1563_LUX_RETLA_DS_5.1.1_LPD23.118-6.1_cid12_subsidy-DEFAULT_CFC.xml
4.Blur_Version.24.11.18.lux_retasia_ds.retasiaall.en.03 (this is ota)
umair deshmukh said:
Hi anuj if you are using indian moto x play then try to flash this one. It will help you
http://www.filefactory.com/file/6jg...23.118-32_cid7_subsidy-DEFAULT_CFC_v2.xml.zip
Click to expand...
Click to collapse
i think this is the alternative
https://mega.nz/#!3dAR3AZZ!UvQco3Bf_BqSEeMfwEMjZUm8quYV31lu5gYoj4PKs3E
anujanuj said:
der umair can i have the alternative link of this because file fectory didnt provide resume links
and
still i had tried these roms
1. X_Play_Retail_India_XT1562_LPD23.118-10_CFC.xml
2.XT1562_LUX_RETASIA_DS_5.1.1_LPD23.118-12_cid7_subsidy-DEFAULT_CFC.xml.zip
3.XT1563_LUX_RETLA_DS_5.1.1_LPD23.118-6.1_cid12_subsidy-DEFAULT_CFC.xml
4.Blur_Version.24.11.18.lux_retasia_ds.retasiaall.en.03 (this is ota)
Click to expand...
Click to collapse
Dude try this one http://www.filefactory.com/file/4ar...LPD23.118-22_cid7_subsidy-DEFAULT_CFC.xml.zip mine problem was solved i hop it will solve your problem also
And sorry i don't have an alternative link..
umair deshmukh said:
Dude try this one http://www.filefactory.com/file/4ar...LPD23.118-22_cid7_subsidy-DEFAULT_CFC.xml.zip mine problem was solved i hop it will solve your problem also
And sorry i don't have an alternative link..
Click to expand...
Click to collapse
tried these roms nothing happened
Nico3d3 said:
http://lmgtfy.com/?q=fastboot+allow+usb+debugging
http://android.stackexchange.com/qu...ndroid-if-forgotten-pattern-for-screen-unlock
Click to expand...
Click to collapse
can you give me the link or tell me how to allow oem unlock via fastboot....?
treibstoff said:
I really want to know why people flash soak tests without unlocking the bootloader? Do they really know what they are doing?
Click to expand...
Click to collapse
Nico3d3 said:
http://lmgtfy.com/?q=fastboot+allow+usb+debugging
http://android.stackexchange.com/qu...ndroid-if-forgotten-pattern-for-screen-unlock
Click to expand...
Click to collapse
hello frnds here is the updated 6.0 file uploaded if i will flash this file so my phone can be start..?
http://www.filefactory.com/folder/dd05c058d3ff8dbe/?sort=created&order=DESC&show=100&page=1
this is stock 6.0 firmware file
anujanuj said:
hello frnds here is the updated 6.0 file uploaded if i will flash this file so my phone can be start..?
http://www.filefactory.com/folder/dd05c058d3ff8dbe/?sort=created&order=DESC&show=100&page=1
this is stock 6.0 firmware file
Click to expand...
Click to collapse
your problem solved or not?
hello,
so i was installing cm13 while installing i wiped entire partition(data,including system)
now i can only boot into recovery , i installed cm13, cm-12.1-YOG4PAS9IG-ham-signed-d4fc2c5394 , after installing if i reboot it will again go to reovery only wont boot into phone..
please help
thank you
ancilary said:
i installed cm13, cm-12.1-YOG4PAS9IG-ham-signed-d4fc2c5394 , after installing ..
Click to expand...
Click to collapse
That's doesn't make sense, can you explain what it means? Which recovery, which rom was installed and was working? You wipes system and data, ok. What did you do then?
strongst said:
That's doesn't make sense, can you explain what it means? Which recovery, which rom was installed and was working? You wipes system and data, ok. What did you do then?
Click to expand...
Click to collapse
hi , thanks for reply
i was using nought rom 7.0 & TEAMWIN recovery
i performed wipe ( data , cache , system , internal storage)
then installed cm13
it booted only to recovery , after that i tried flashing different rom , no use everytime it goes only to recovery..
What's with your other request? http://forum.xda-developers.com/zuk-z1/help/how-to-make-device-stock-t3515921
You need cm13 or stock rom? It's annoying to open several threads..
strongst said:
What's with your other request? http://forum.xda-developers.com/zuk-z1/help/how-to-make-device-stock-t3515921
You need cm13 or stock rom? It's annoying to open several threads..
Click to expand...
Click to collapse
that was different but i tried this and now im stuck here
ancilary said:
that was different but i tried this and now im stuck here
Click to expand...
Click to collapse
And what you need is a running cm13 now?
strongst said:
And what you need is a running cm13 now?
Click to expand...
Click to collapse
ya running cm or any other rom is fine..
ancilary said:
ya running cm or any other rom is fine..
Click to expand...
Click to collapse
seems you don't know what you need cm isn't the same as cos, the difference is huge.
For cos12.1 stock rom you can get it here http://forum.xda-developers.com/zuk-z1/help/how-to-make-device-stock-t3515921/post70007487
Flash it with all in one tool, it's the easiest way.
Cm13 you can flash it though twrp.
strongst said:
seems you don't know what you need cm isn't the same as cos, the difference is huge.
For cos12.1 stock rom you can get it here http://forum.xda-developers.com/zuk-z1/help/how-to-make-device-stock-t3515921/post70007487
Flash it with all in one tool, it's the easiest way.
Cm13 you can flash it though twrp.
Click to expand...
Click to collapse
i flashed cm-12.1-YOG4PAS3AJ-ham-signed.zip with twrp still i get booted to recovery only
ancilary said:
i flashed cm-12.1-YOG4PAS3AJ-ham-signed.zip with twrp still i get booted to recovery only
Click to expand...
Click to collapse
You didn't understand or read my post... You need to flash stock firmware with fastboot. I didn't wrote flash it with twrp.
Use the all in one tool. It's called so, because you can do all with it. Like downloading stock rom and flash it :good:
strongst said:
You didn't understand or read my post... You need to flash stock firmware with fastboot. I didn't wrote flash it with twrp.
Use the all in one tool. It's called so, because you can do all with it. Like downloading stock rom and flash it :good:
Click to expand...
Click to collapse
i tried flashing stock recovery using All in one tool but now its not booting to recovery only
ancilary said:
i tried flashing stock recovery using All in one tool but now its not booting to recovery only
Click to expand...
Click to collapse
Sorry mate, why you do that? It said to flash stock rom with all in one tool, not stock recovery
strongst said:
Sorry mate, why you do that? It said to flash stock rom with all in one tool, not stock recovery
Click to expand...
Click to collapse
i read it as recovery my bad...
now i cannot boot into recovery/fastboot.
powers on rarely too just shows zuk logo and goes off
ancilary said:
i read it as recovery my bad...
now i cannot boot into recovery/fastboot.
powers on rarely too just shows zuk logo and goes off
Click to expand...
Click to collapse
Use all in one tool to boot into bootloader. Read carefully or your next step is qfil method
Here's a good guide in case you're don't get it through aoi tool: http://forum.xda-developers.com/zuk-z1/general/qpst-method-how-to-unbrick-to-stock-t3506833
But better to check again if you can flash stock cos rom with tool
strongst said:
Use all in one tool to boot into bootloader. Read carefully or your next step is qfil method
Here's a good guide in case you're don't get it through aoi tool: http://forum.xda-developers.com/zuk-z1/general/qpst-method-how-to-unbrick-to-stock-t3506833
But better to check again if you can flash stock cos rom with tool
Click to expand...
Click to collapse
Nothing is happening in phone , no respone for any button press . its wont turn on also now
ancilary said:
Nothing is happening in phone , no respone for any button press . its wont turn on also now
Click to expand...
Click to collapse
Can you charge it?
but ....... I am in twrp unable to reboot into my rom. When I click on Install I see all these folders with letters and numbers and what my original folders.
Can somone help me boot into my rom again?
ms.journie said:
but ....... I am in twrp unable to reboot into my rom. When I click on Install I see all these folders with letters and numbers and what my original folders.
Can somone help me boot into my rom again?
Click to expand...
Click to collapse
You will more than likely need to format data. This will cause you to loose everything. But that is what you are seeing, those folders, are your data. Just encrypted.
Also make sure you are on the latest version of TWRP. Sometimes the older unsupported version had encryption errors.
Omg this saddens me! So there's no way I am unable to at least retrieve my pictures?
Scott said:
You will more than likely need to format data. This will cause you to loose everything. But that is what you are seeing, those folders, are your data. Just encrypted.
Also make sure you are on the latest version of TWRP. Sometimes the older unsupported version had encryption errors.
Click to expand...
Click to collapse
Have u tested change boot partition ?
yup
J3zz said:
Have u tested change boot partition ?
Click to expand...
Click to collapse
ms.journie said:
yup
Click to expand...
Click to collapse
Simple test are:
- change boot partition
- reflash system
- Say goodbye too all
Got the same problem, Solved After reboot in twrp and enter the good decryption code
I'm right in the middle of reflashing. I am trying everything else before I do say goodbye to my pictures! :crying:
How did you figure out the decryption code?
J3zz said:
Simple test are:
- change boot partition
- reflash system
- Say goodbye too all
Got the same problem, Solved After reboot in twrp and enter the good decryption code
Click to expand...
Click to collapse
ms.journie said:
I'm right in the middle of reflashing. I am trying everything else before I do say goodbye to my pictures! :crying:
How did you figure out the decryption code?
Click to expand...
Click to collapse
First time entering in twrp after flashing update, I did not get folder to flash magisk, did a reboot and get it, just a bad encryption code I think
Did u flash rom or anything else before getting this problem ?
Yup, I sure did! 4am couldn't sleep so I thought I would finally put a fingerprint mod on; which I have done this before with no issues. For the life of me, I don't remember which mod I tried to install thru Magisk.
My phone is currently stuck on "Phone is starting"
I also think it's time to look into some sort of automatic back up service..... Got any ideas?
J3zz said:
First time entering in twrp after flashing update, I did not get folder to flash magisk, did a reboot and get it, just a bad encryption code I think
Did u flash rom or anything else before getting this problem ?
Click to expand...
Click to collapse
ms.journie said:
Yup, I sure did! 4am couldn't sleep so I thought I would finally put a fingerprint mod on; which I have done this before with no issues. For the life of me, I don't remember which mod I tried to install thru Magisk.
My phone is currently stuck on "Phone is starting"
I also think it's time to look into some sort of automatic back up service..... Got any ideas?
Click to expand...
Click to collapse
Use msmdownloadtool, have u tried using magisk uninstall in twrp with zip file ? Then boot and uninstall the "****in" fantastic module... maybe it works
I did try to uninstall Magisk in twrp using adb shell. I never had any luck with that msmdownloadtool and not only that it relocks your bootloader.
I usually go this route [ROM][STOCK][FASTBOOT][OP6T] Stock Fastboot ROMs for OnePlus 6T https://forum.xda-developers.com/oneplus-6t/how-to/rom-stock-fastboot-roms-oneplus-6t-t3862516
Thanks for trying to me!
J3zz said:
Use msmdownloadtool, have u tried using magisk uninstall in twrp with zip file ?
Click to expand...
Click to collapse
ms.journie said:
I did try to uninstall Magisk in twrp using adb shell. I never had any luck with that msmdownloadtool and not only that it relocks your bootloader.
I usually go this route [ROM][STOCK][FASTBOOT][OP6T] Stock Fastboot ROMs for OnePlus 6T https://forum.xda-developers.com/oneplus-6t/how-to/rom-stock-fastboot-roms-oneplus-6t-t3862516
Thanks for trying to me!
Click to expand...
Click to collapse
Good luck !!
I saw this happen when I used the official TWRP app.
It went away when I used this TWRP. Hope that helps.
I'm glad you already know not to use the MSM tool. Too many people jump straight to this.....
You just need to boot the correct recovery and your data will decrypt, and you will be able to back it up to a PC, then you can reload your ROM via TWRP or Fastboot to get the phone bootable again. So now it's a question of what ROM were you running before. Do you need a recovery with the latest security patch or something older? What TWRP are you running. Try 3.3.1-6 psychen6 linked too first. Boot that image from Fastboot. See if your password/pin will work to decrypt your data.