P9 Lite Stuck in RESCUE MODE , Please HELP ME!!
The problem
1-adb is not recognizing the device
2-fastboot is not recognizing the device
3-I cannot enter TWRP
4-Huawei buttons (volume up + volume down + on/off button) function doesn't start neither
5-The phone enters directly to Rescue Mode and says
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
PHP:
ERROR MODE
error!
Func NO : 11 (recovery image)
Error NO : (load failed)
Leave it to discharge completely and recharge it. Repeat the step until the phone boots in the software.
If not, then you will have to pay some cash for a new motherboard.
If you have warranty, tell them that...idk...you got an OTA update and then this screen shown.
Johnny TDN said:
Leave it to discharge completely and recharge it. Repeat the step until the phone boots in the software.
If not, then you will have to pay some cash for a new motherboard.
If you have warranty, tell them that...idk...you got an OTA update and then this screen shown.
Click to expand...
Click to collapse
Now I checked warranty and its expired :/
shmagiGEO said:
Now I checked warranty and its expired :/
Click to expand...
Click to collapse
Well. Try the first method. If it won't work, then learn from your mistake and buy a new motherboard.
Johnny TDN said:
Well. Try the first method. If it won't work, then learn from your mistake and buy a new motherboard.
Click to expand...
Click to collapse
cant find original motherboard ((
shmagiGEO said:
cant find original motherboard ((
Click to expand...
Click to collapse
What vns do you have? (Look at the back of your phone)
Johnny TDN said:
What vns do you have? (Look at the back of your phone)
Click to expand...
Click to collapse
VNS-L21 Dual sim
use the guide to revert to mm
shmagiGEO said:
VNS-L21 Dual sim
Click to expand...
Click to collapse
Have you tried the discharge method that i told you?
It worked or still the same thing?
---------- Post added at 01:50 PM ---------- Previous post was at 01:49 PM ----------
cmax24 said:
use the guide to revert to mm
Click to expand...
Click to collapse
He has Recovery image problem, not boot image problem.
The phone will always boot on rescue mode, no matter what.
I tried the discharge method and it worked. It booted in the software.
Johnny TDN said:
Have you tried the discharge method that i told you?
It worked or still the same thing?
---------- Post added at 01:50 PM ---------- Previous post was at 01:49 PM ----------
He has Recovery image problem, not boot image problem.
The phone will always boot on rescue mode, no matter what.
I tried the discharge method and it worked. It booted in the software.
Click to expand...
Click to collapse
You can understand me clearly?
Johnny TDN said:
Leave it to discharge completely and recharge it. Repeat the step until the phone boots in the software.
If not, then you will have to pay some cash for a new motherboard.
If you have warranty, tell them that...idk...you got an OTA update and then this screen shown.
Click to expand...
Click to collapse
Sorry for my bad english.
I'm having the same problem.
When let the phone discharges, it will never take charge again, I can't explain it but is like rescue mode is not able to charging battery enough, and it's unrecognizable for the PC (no adb, no fastboot, no unknown device, nothing, like is nothing connected)
Fastboot&Rescue mode unaccessable, eRecovery unnaccessable, It starts only in sh*tty Rescue mode
I think motherboard is dead... In my country is a newer phone and I can't find an used motherboard.
victoraqf92 said:
Sorry for my bad english.
I'm having the same problem.
When let the phone discharges, it will never take charge again, I can't explain it but is like rescue mode is not able to charging battery enough, and it's unrecognizable for the PC (no adb, no fastboot, no unknown device, nothing, like is nothing connected)
Fastboot&Rescue mode unaccessable, eRecovery unnaccessable, It starts only in sh*tty Rescue mode
I think motherboard is dead... In my country is a newer phone and I can't find an used motherboard.
Click to expand...
Click to collapse
Leave it in the rescue mode until it discharges completely. Like to no longer boot in any modes.
---------- Post added at 08:55 PM ---------- Previous post was at 08:51 PM ----------
shmagiGEO said:
You can understand me clearly?
Click to expand...
Click to collapse
Yes.
You can also pull off the battery... the cover is just glued for a bit works also
Johnny TDN said:
Leave it in the rescue mode until it discharges completely. Like to no longer boot in any modes.
---------- Post added at 08:55 PM ---------- Previous post was at 08:51 PM ----------
Yes.
Click to expand...
Click to collapse
I also tried leaving it until discharges, later i connect to PC but there's only the low battery signal, after few minutes it turns on in... rescue mode :v
If I disconnect the battery and conect the phone to PC.... rescue mode :v
victoraqf92 said:
I also tried leaving it until discharges, later i connect to PC but there's only the low battery signal, after few minutes it turns on in... rescue mode :v
If I disconnect the battery and conect the phone to PC.... rescue mode :v
Click to expand...
Click to collapse
Same here,the only fix is by change motherboard,i will never ever buy a huawei phone
cristi.blidariu said:
Same here,the only fix is by change motherboard,i will never ever buy a huawei phone
Click to expand...
Click to collapse
It's not Huawei's fault that you did **** in the phone. Huawei phones are blazing fast and always stable.
Error/rescue modes are caused by the user's fault.
If you hate Huawei, please go for Samsung's Touchwiz battery drain and lag, or for Iphone's ****tiest battery life ever.
Johnny TDN said:
It's not Huawei's fault that you did **** in the phone. Huawei phones are blazing fast and always stable.
Error/rescue modes are caused by the user's fault.
If you hate Huawei, please go for Samsung's Touchwiz battery drain and lag, or for Iphone's ****tiest battery life ever.
Click to expand...
Click to collapse
Yes you are right is my fault
I solved that, i kill my phone one week ago, discharge complete, after that, connect on pc and push volume down, and you can enter to fastboot... that works to me... don't let charge, connect and push volume down... (sorry for my bad English)
Related
I think I've successfully rooted my On5. Now, a couple of questions for those who've already rooted their On5:
What bloatware can I remove? I've turned a few off to test if it affects the phone operation and they don't seem to, but that's rather hit/miss. What have some of you out there removed to free up space?
How do you remove bloatware? What app is best for doing so?
Now that it's rooted is there any way to configure the phone so it treats the SD card as primary memory?
What are some basic apps you all would recommend that are available now that my phone's rooted? My main purpose in doing this was to free up internal memory but, if there's functionality out there you like and/or can recommend, I would appreciate you doing so.
Thanks in advance.
Rufus67 said:
I think I've successfully rooted my On5. Now, a couple of questions for those who've already rooted their On5:
What bloatware can I remove? I've turned a few off to test if it affects the phone operation and they don't seem to, but that's rather hit/miss. What have some of you out there removed to free up space?
How do you remove bloatware? What app is best for doing so?
Now that it's rooted is there any way to configure the phone so it treats the SD card as primary memory?
What are some basic apps you all would recommend that are available now that my phone's rooted? My main purpose in doing this was to free up internal memory but, if there's functionality out there you like and/or can recommend, I would appreciate you doing so.
Thanks in advance.
Click to expand...
Click to collapse
List of removable bloatware http://forum.xda-developers.com/showthread.php?t=2770729
there are plenty of apps out there on playstore for removal of bloatware but i will suggest you to first "freeze" the app using titanium backup and check if it causes instability. If it doesnt then remove the app using titanium backup itself.
Qlive Q4812 stuck on the logo
Hello,
My little boy has a Qlive Q48.12, it's a gift that I had done it.
Following mishandling the phone stuck on the logo.
Is it possible to solve this problem?
Thanks in advance for your reply.
Excuse me for my bad english.
LillyFR said:
Hello,
My little boy has a Qlive Q48.12, it's a gift that I had done it.
Following mishandling the phone stuck on the logo.
Is it possible to solve this problem?
Thanks in advance for your reply.
Excuse me for my bad english.
Click to expand...
Click to collapse
What mishandling has he done? Rooting ?
Qlive Q4812 stuck on the logo
KingWilliams said:
What mishandling has he done? Rooting ?
Click to expand...
Click to collapse
He had to remove the battery while the phone was updated
LillyFR said:
He had to remove the battery while the phone was updated
Click to expand...
Click to collapse
Well ok ...does it enter fastboot or download mode? If u know what i mean ...if it does then pls download stock firmware and flash using fastboot
Qlive Q4812 stuck on the logo
KingWilliams said:
Well ok ...does it enter fastboot or download mode? If u know what i mean ...if it does then pls download stock firmware and flash using fastboot
Click to expand...
Click to collapse
To enter the fastboot have to press power and volume?
LillyFR said:
To enter the fastboot have to press power and volume?
Click to expand...
Click to collapse
Power off the phone...Hold the volume down button first and then power on button simultaneously ...after 3 seconds or something leave the power button but keep holding volume down button... You will enter fastboot mode ...u will get some options on screen like recovery, power off etc ..sometime u won't but the screen will be black ..connct to PC and check if its detected using adb commands
Qlive Q4812 stuck on the logo
KingWilliams said:
Power off the phone...Hold the volume down button first and then power on button simultaneously ...after 3 seconds or something leave the power button but keep holding volume down button... You will enter fastboot mode ...u will get some options on screen like recovery, power off etc ..sometime u won't but the screen will be black ..connct to PC and check if its detected using adb commands
Click to expand...
Click to collapse
I did as you have advised me, I have the fastboot but in Chinese
---------- Post added at 09:05 PM ---------- Previous post was at 08:18 PM ----------
This was the test system that was in Chinese.
The screen is blocked on selecting the fastboot (see attached image).
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
[/url][/IMG]
Qlive Q4812 stuck on the logo
LillyFR said:
I did as you have advised me, I have the fastboot but in Chinese
---------- Post added at 09:05 PM ---------- Previous post was at 08:18 PM ----------
This was the test system that was in Chinese.
The screen is blocked on selecting the fastboot (see attached image).
[/url][/IMG]
Click to expand...
Click to collapse
I connected the phone to the PC but it has not detected
LillyFR said:
I connected the phone to the PC but it has not detected
Click to expand...
Click to collapse
Install samsung drivers and then try connecting your device. It will get detected.
Chinese boot on a Qlive phone? LOL This thread got completely "Shanghai"ed!
Does anyone have a link for twrp to work on andriod nougat? My Device is running the beta version on Andriod N on the mate 8 but i need to take it back a firmware because nothing is working.
Didn't you get the memo?
You were tasked with the responsibility of creating one.
Now PLEASE get to it were all waiting on YOU !
ps Have a nice day.
kdkinc said:
Didn't you get the memo?
You were tasked with the responsibility of creating one.
Now PLEASE get to it were all waiting on YOU !
ps Have a nice day.
Click to expand...
Click to collapse
so there isnt then??
I wish there was.. I'm stuck with my mate 8 and can't do anything but turn it on and off
Need TWRP for Emui 5 too ( can a twrp for the pixel work maybe... at least it'll be for nougat if not for emui .. i just need to copy the /dload folder to my mate 8.. can't do via adb cause i can't turn on usb debugging so no /adb push
Swissguy36 said:
I wish there was.. I'm stuck with my mate 8 and can't do anything but turn it on and off
Need TWRP for Emui 5 too ( can a twrp for the pixel work maybe... at least it'll be for nougat if not for emui .. i just need to copy the /dload folder to my mate 8.. can't do via adb cause i can't turn on usb debugging so no /adb push
Click to expand...
Click to collapse
Fastboot?
gm007 said:
Fastboot?
Click to expand...
Click to collapse
how do i push the dload folder via fastboot?
adb devices gives me no device
Swissguy36 said:
how do i push the dload folder via fastboot?
adb devices gives me no device
Click to expand...
Click to collapse
You need to install the drivers for fastboot,check the device manager the see what is recognized when u connect in fastboot mode.
And check this tool for unbrick maybe it can help you http://forum.xda-developers.com/mate-8/development/rayglobe-italian-knife-t3295526
gm007 said:
You need to install the drivers for fastboot,check the device manager the see what is recognized when u connect in fastboot mode.
Click to expand...
Click to collapse
hold on.. i'll try....
Edit:
pc doesn't recognise my mate 8 at all.. as I said usb debugging can't be turned on...
Rayglobe's Italian Knife doesn't do anything but "updating" please wait since over 5 minutes
Mate 8 is recognised in device manager as Android Bootloader Device.. but /adb devices gives no result
Swissguy36 said:
hold on.. i'll try....
Edit:
pc doesn't recognise my mate 8 at all.. as I said usb debugging can't be turned on...
Rayglobe's Italian Knife doesn't do anything but "updating" please wait since over 5 minutes
plus i downloaded adb drivers for mate 8 , double click install drivers.exe but nothing happens
Click to expand...
Click to collapse
Maybe something wrong with ur pc,it should detect ur phone in device manager.
Knife tool take lot of time to load so wait.
gm007 said:
Maybe something wrong with ur pc,it should detect ur phone in device manager.
Knife tool take lot of time to load so wait.
Click to expand...
Click to collapse
It detects my device in device manager but not in adb devices, henche i cannot copy anything to my phone
Knife tool is "updating" since 25 minutes
Edit:
wget was the problem, once I closed the process, italian knife is working..... reporting back after trying some things
This is. The wrong driver install manual,the name of the driver ..... sooner....
letschky said:
This is. The wrong driver install manual,the name of the driver ..... sooner....
Click to expand...
Click to collapse
OK i'm back with emui 5.0 and the same problem that i can't skip fingerprint setup cause it doesn't let me add a PIN via voice input I'll retry to unbrick with emui 4.0 via italian knife..
---------- Post added at 09:47 AM ---------- Previous post was at 09:35 AM ----------
Now I have following problem..
on EMUI5:
First boot:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Stuck...
If i choose continue without fingerprint setup this happens:
Back to the beginning.
Using the italian knife to unbrick, using the boot.img cust.img recovery.img and system.img from L29B152 update.app this is the error:
So I guess I will have to wait for Twrp Emui 5 to be released, right?
Try unbrick and put nougat firmware files.
Boot to stock recovery and do factory reset.
What happen when you skip the fingerprint setup?
I can enter the wifi password since it's only numbers..
then i get to the google login.. which is letters.. and the voice input doesn't get anything right... : ( i need a goddamn keyboard somehow flashable over adb
Flash nougat latest recovery and you are good to go back to old formware via dload
bluheart said:
Flash nougat latest recovery and you are good to go back to old formware via dload
Click to expand...
Click to collapse
after I factory reset my phone is FPS locked and I can't use fastboot at all... great
---------- Post added at 12:14 PM ---------- Previous post was at 11:15 AM ----------
OMG i regret installing this beta first time ever i regret.... now i'm stuck at google account input.. with my voice.. i have it all done but NOT the @ sign.. saying at sign doesn't work... how can I input a @ ? someone please help
Swissguy36 said:
after I factory reset my phone is FPS locked and I can't use fastboot at all... great
---------- Post added at 12:14 PM ---------- Previous post was at 11:15 AM ----------
OMG i regret installing this beta first time ever i regret.... now i'm stuck at google account input.. with my voice.. i have it all done but NOT the @ sign.. saying at sign doesn't work... how can I input a @ ? someone please help
Click to expand...
Click to collapse
Unlock boot
Let frp remain that way, then dload your region latest firmware. Dont regret fire up
bluheart said:
Unlock boot
Let frp remain that way, then dload your region latest firmware. Dont regret fire up
Click to expand...
Click to collapse
God above helped me find a micro usb - usb adapter and I could fix it all with my pysical keyboard thanks for everyone that was helping now i just need to flash the update.
Good boy
Swissguy36 said:
OK i'm back with emui 5.0 and the same problem that i can't skip fingerprint setup cause it doesn't let me add a PIN via voice input I'll retry to unbrick with emui 4.0 via italian knife..
Click to expand...
Click to collapse
Brother, How did you manage to install Nougat. I am also stuck bootloop. I can only access fastboot and eRecovery. Kindly post here what you did to resolve your issue.
I have a Le Pro 3,with TWRP and Lineage 14.1 instaled . I was using the Facebook camera and the device turned off.
Now I Can't Power up, even to put on charge theres no response from the device, any Led blink.
I tryed vol+ and Power, vol- and Power and only Power.
Please someone help me, give me a light
Does it respond when you plug in the charger? Cables/chargers are known to be fussy, try a different cable/charger if it doesnt work with stock. If all else fails @tora33 found what appears to be the qfil files
http://www.leeco.re/topic/1906-helpx720-bricked/?do=findComment&comment=33155
As a last resort...
No man, doesn't repond to charger, the notification led does not blink too. I tryed different chargersw ith no result.
Man I really sad, I m on the middle of family trip and de cellphone just died.
I will see the link that you sent to me!
Thanks Mate !
Thats a bummer.... Do you have a pc/laptop that you could plug the phone into, to see whether it shows up in the device manager at all?
trizex said:
Thats a bummer.... Do you have a pc/laptop that you could plug the phone into, to see whether it shows up in the device manager at all?
Click to expand...
Click to collapse
Hi, I don't have pc, I'm on family trip right now. Sorry, What's a "bummer"?
It was 24hours off charge and now I put again to charge and he has a short vibe and show the led on blue. But still doesn't power on and go to yhe twrp.
What exactly he needs to show on device manager?
Thanks
falarara87 said:
Hi, I don't have pc, I'm on family trip right now. Sorry, What's a "bummer"?
It was 24hours off charge and now I put again to charge and he has a short vibe and show the led on blue. But still doesn't power on and go to yhe twrp.
What exactly he needs to show on device manager?
Thanks
Click to expand...
Click to collapse
Bummer as in bad luck buddy. Open the link I sent, in the archive you download there are detailed instructions and lots of screenshots, examine em carefully, cant remember right now exactly, but i think qualcomm mode 9008 or smthng similar should pop up in dev mgr. Also search xda, I believe similar problmes have happened to some guys on here before, try to start it in fastboot mode(vol down + power button).
---------- Post added at 09:04 AM ---------- Previous post was at 09:00 AM ----------
https://forum.xda-developers.com/le-pro3/help/le-pro3-bricked-fastboot-recovery-t3487259
There u go, details of the dload mode
trizex said:
Bummer as in bad luck buddy. Open the link I sent, in the archive you download there are detailed instructions and lots of screenshots, examine em carefully, cant remember right now exactly, but i think qualcomm mode 9008 or smthng similar should pop up in dev mgr. Also search xda, I believe similar problmes have happened to some guys on here before, try to start it in fastboot mode(vol down + power button).
---------- Post added at 09:04 AM ---------- Previous post was at 09:00 AM ----------
https://forum.xda-developers.com/le-pro3/help/le-pro3-bricked-fastboot-recovery-t3487259
There u go, details of the dload mode
Click to expand...
Click to collapse
I will take a look. Maybe I can revive the device.
Thanks for the great help!
As a LEX720 owner, is that issue a recurring problem when the battery completely drains? Need I to make sure never ever to let that happen?
ZeblodS said:
As a LEX720 owner, is that issue a recurring problem when the battery completely drains? Need I to make sure never ever to let that happen?
Click to expand...
Click to collapse
I think that is not related with battery's drain. In my case was using a custom rom(Android N) with no oficial support(le eco) and a little bit of bad lucky!
falarara87 said:
I will take a look. Maybe I can revive the device.
Thanks for the great help!
Click to expand...
Click to collapse
If you do, be sure to let us know, for future reference
trizex said:
If you do, be sure to let us know, for future reference
Click to expand...
Click to collapse
Yes, I will certainly share with you guys, this situation I don't wish to anyone.
Today I'm leaving Argentina e come back to Brazil, getting there I will make that test you recommended, if the devices was recognized on the pc. Surfing on the YouTube I found a guy that already revived two le Pro 3 from the dead on Brazil, I sent an email and he told me about the flash tool like you did. I'm very safe about revive the device, even costing less that 300 dollars, I want the device up and running again.
I will sharing my progress hereon this thread.
Thanks Again!
falarara87 said:
Yes, I will certainly share with you guys, this situation I don't wish to anyone.
Today I'm leaving Argentina e come back to Brazil, getting there I will make that test you recommended, if the devices was recognized on the pc. Surfing on the YouTube I found a guy that already revived two le Pro 3 from the dead on Brazil, I sent an email and he told me about the flash tool like you did. I'm very safe about revive the device, even costing less that 300 dollars, I want the device up and running again.
I will sharing my progress hereon this thread.
Thanks Again!
Click to expand...
Click to collapse
Youre welcome, hope you revive it, it's a great device. And those are some really good news, that the flashone is really working, get back to us soon
work 100%
unbrick , here or here
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
after unbrick , Charged for 2 minutes and then pushing the power button and then
must install a fastboot rom now uploading..... le_zl1_fastboot
tora33 said:
work 100%
unbrick , here or here
Click to expand...
Click to collapse
Anyone have qfile zip because the link is not working. Tnx
tora33 said:
work 100%
unbrick , here or here
Click to expand...
Click to collapse
I'm trying right now!
First Attempt doesn't work...T
dannchelu said:
Anyone have qfile zip because the link is not working. Tnx
Click to expand...
Click to collapse
I can upload the zip on my google drive, just tak e few minutes.
Is not a hurry for me, my device is stil working but in case of... . Thanks a lot
dannchelu said:
Is not a hurry for me, my device is stil working but in case of... . Thanks a lot
Click to expand...
Click to collapse
Give more 20 minutes! It's uploading
https://drive.google.com/open?id=0B03ZM_Njp_IfZUtjRFNlZ3dYYVk
Thanks so much, i will keep files on the cloud and i hope not to use it but is good to have a way to resurrect this phone. :good:
tora33 said:
work 100%
unbrick , here or here
Click to expand...
Click to collapse
Hello Tora33!
First thanks to send me this tutorial, it was very help full to me.
I did the process about 5 times and I have no lucky, the device shows another behavior, when you try to start on the power button he gets a short vibe and if you press any button (vol + or -) he vibes, but still on the black screen (The display stayed off all the time).
There's anything that i can do? Or just accept the phone pasted way =(
Edit; I forget to tell, the device warm a little and when I try to power up on pc he shows like a Unit ( E
Everything went well for you, your phone lives
Put the cellphone in the socket to charge and put on / off (power key) , If the phone opens , Connect the phone to your computer , Go to your computer in "device management" , If everything is good, you have to put a fast boot rom
Hello Everyone, Need Some Help for My Huawei Mediapad m3. So recently my brother took my phone and wanted to root itbut in the end he brick my m3, So I open up the lcd n disconnect the battery cable from the inside n connect it back, then it tried to put it in recovery mode (volume up+power button) and download mode (volume down+power button) and i even try the sdcard and dload method but im not sure if i did the dload method correctly or not. So can anyone help me because no matter what method i try it end up displaying the same msg
btw
1- my table is huawei m3 btv Btv-DL09C209B009
2. the bootloader is unlock
3. i cant go into recovery or download mode or fastboot or rescue mode
4. and i have already tried installing HiSuite on pc but no device is detected even when i change
different usb port and computers
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Have you tried installing HiSuite on a PC and connecting it to see if some of the recovery tools it has can help?
Sent from my Pixel XL using Tapatalk
ahent said:
Have you tried installing HiSuite on a PC and connecting it to see if some of the recovery tools it has can help?
Sent from my Pixel XL using Tapatalk
Click to expand...
Click to collapse
yes already tried it, my pc cannot detect my device
Does it show this message then boot loop or does it shut down or does it finish loading?
Sent from my Pixel XL using Tapatalk
---------- Post added at 04:11 PM ---------- Previous post was at 04:06 PM ----------
Ok seems like there is a fix, I found this on huawei p9 forum, guy had same problem, I skimmed it but seems like he was able to use SD card to force it to install stock here is url:
https://forum.xda-developers.com/showthread.php?t=3523003
Good luck.
Sent from my Pixel XL using Tapatalk
ahent said:
Does it show this message then boot loop or does it shut down or does it finish loading?
Sent from my Pixel XL using Tapatalk
---------- Post added at 04:11 PM ---------- Previous post was at 04:06 PM ----------
Ok seems like there is a fix, I found this on huawei p9 forum, guy had same problem, I skimmed it but seems like he was able to use SD card to force it to install stock here is url:
https://forum.xda-developers.com/showthread.php?t=3523003
Good luck.
Sent from my Pixel XL using Tapatalk
Click to expand...
Click to collapse
1. when i turn on after the mediapad logo then it shows this message straight away n stay there for a long time
2. ok going to try the "fix" hope it works thanks
ahent said:
Does it show this message then boot loop or does it shut down or does it finish loading?
Sent from my Pixel XL using Tapatalk
---------- Post added at 04:11 PM ---------- Previous post was at 04:06 PM ----------
Ok seems like there is a fix, I found this on huawei p9 forum, guy had same problem, I skimmed it but seems like he was able to use SD card to force it to install stock here is url:
https://forum.xda-developers.com/showthread.php?t=3523003
Good luck.
Sent from my Pixel XL using Tapatalk
Click to expand...
Click to collapse
uhhhh u tried ur fix...thats the dload method....... that only works only is your can boot into recovery menu.... and i cant boot into recovery nor rescue menu.......
Nope like I said I just skimmed it, it sounded like the OP was having a similar problem and thought it would help.
Sent from my Pixel XL using Tapatalk
can you get access to fastboot
trd_jzx100 said:
can you get access to fastboot
Click to expand...
Click to collapse
nop not even fastboot
well your last resort if dload method and you can't access the bootloader or recovery would be dc phoenix. If method 1 doesn't work try method 2. Although it will probably wipe your serial number if you use method 2.
trd_jzx100 said:
well your last resort if dload method and you can't access the bootloader or recovery would be dc phoenix. If method 1 doesn't work try method 2. Although it will probably wipe your serial number if you use method 2.
Click to expand...
Click to collapse
hmmmmm dc phoenix dun even support mediapad m3 k
I have the same problem.
How did you solve it?
I have the same issue.
There doesn't seem to be a way to get into Recovery/eRecovery/Fastboot in order to reflash TWRP or even repair using the dload method.
However, the tablet is not completely bricked. I managed to boot normally using the battery drain method.
Basically left the "Your device is booting now..." screen on all night. Next morning I plugged into a charger and after a few minutes the tablet booted. I waited until it has 20% battery life before I looked at whether or not it was working. it was.
This seems like a decent temporary workaround, but you can't reboot the tablet. If you do it will get stuck at the "Your devices is booting now..." screen again.
If it is turned on again after discharge, it will not boot.
It stops at the same screen. :crying:
_Boondock_ said:
I have the same issue.
There doesn't seem to be a way to get into Recovery/eRecovery/Fastboot in order to reflash TWRP or even repair using the dload method.
However, the tablet is not completely bricked. I managed to boot normally using the battery drain method.
Basically left the "Your device is booting now..." screen on all night. Next morning I plugged into a charger and after a few minutes the tablet booted. I waited until it has 20% battery life before I looked at whether or not it was working. it was.
This seems like a decent temporary workaround, but you can't reboot the tablet. If you do it will get stuck at the "Your devices is booting now..." screen again.
Click to expand...
Click to collapse
Did anyone find to fix,I have same problem now. :'(
Does this issue occur after trying to root the device? Maybe I will do this in the future that's why I am asking. What went wrong then and how can you avoid that state? Sorry for not providing any help.
Borkse said:
Does this issue occur after trying to root the device? Maybe I will do this in the future that's why I am asking. What went wrong then and how can you avoid that state? Sorry for not providing any help.
Click to expand...
Click to collapse
My M3 is fine with root until I try to use suhide. I don't know what step is wrong, It cant go to developer option.
I try to reset factory but It still wrong, then I rollback rom to emui 4.1, It back to normally.
Finally It bacome like this because I try to update to emui 5.0 and unlockbootloader again...
I think it will be fine but It gone forever.
tomorrow I will send it to huawei service center.
May be claim, I do not know how much it costs. :crying::crying:
Hi all,
I open this topic in order to speak about the Microwear H2. Android 5.1 , 1 Gb ram, 16 Gb storage, 2 MPixel camera, and so on.
Thanks to Open Watch Project, in this discussion will be uploaded mods as well as will be inserted tips & tricks when available.
Enjoy your watch :good:
FIRMWARE LIST :
* 2017.10.30
LINK
* 2018.03.03
LINK
TWRP :
* OLD Version ( For Microwear H2 First Generation with screen 0° degrees )
LINK
* NEW Version ( For Microwear H2 Second Generation with screen 180° degrees )
antiharmony recovery will come soon
INFO / TIPS / TRICKS :
* If you want to use TWRP Recovery, remember that android system will overwrite it by stock recovery inside the firmware system. In order to avoid overwriting TWRP, u'll 2 ways :
===> rename INSTALL-RECOVERY.SH when in TWRP mode in INSTALL-RECOVERY.whatuwant ( BEFORE BOOTING FIRST TIME android, after flashing TWRP )
===> flash SuperSU and root the watch when in TWRP mode ( BEFORE BOOTING FIRST TIME android, after flashing TWRP )
* If u get screen inverted, u've got a Microwear H2 Second Generation (2018) with 180° degrees. U've to mod BUILD.PROP in order to restore the correct screen mode. In BUILD.PROP, it's necessary to mod the line
ro.sf.hwrotation=0
in
ro.sf.hwrotation=180
and then it's possible to reboot the watch. Remember the '644' permission (CHMOD)
*
POLISHED SCREEN FERRULE:
here my Microwear H2 Second Generation with my polish mod
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
HI all. I bought this smartwatch and I was pretty happy with it, until battery went off. (I think) . No way to charge it, continuous loop when chargue cable attached. I have searched for a new battery and I can't find replacement. Does anybody found a reseller, or a alliexpress shop that can provide one? Thanks a lot in advance
dagoaldom said:
HI all. I bought this smartwatch and I was pretty happy with it, until battery went off. (I think) . No way to charge it, continuous loop when chargue cable attached. I have searched for a new battery and I can't find replacement. Does anybody found a reseller, or a alliexpress shop that can provide one? Thanks a lot in advance
Click to expand...
Click to collapse
Have u tried to remove batt cable and clean contacts?
PYCON said:
Have u tried to remove batt cable and clean contacts?
Click to expand...
Click to collapse
Yes, i did. :crying: I used special cleaner...no results . I could try to clean it again, but I don't expect different results.
dagoaldom said:
Yes, i did. :crying: I used special cleaner...no results . I could try to clean it again, but I don't expect different results.
Click to expand...
Click to collapse
Before this problem, u flashed some firmware? Or root? Or some other mod, something else???
PYCON said:
Before this problem, u flashed some firmware? Or root? Or some other mod, something else???
Click to expand...
Click to collapse
nop, nothing. The only thing I could see was the last night i put it in chargue suddenly flashed and turned off..since then no chargue and bootloop when connect the cable. I have left it 1 month without trying to charge to dischard the battery, but nothing happens..well..the same..
dagoaldom said:
nop, nothing. The only thing I could see was the last night i put it in chargue suddenly flashed and turned off..since then no chargue and bootloop when connect the cable. I have left it 1 month without trying to charge to dischard the battery, but nothing happens..well..the same..
Click to expand...
Click to collapse
U can try to force firmware flashing with SP Tools if the Preloader is working fine ( Preloader Partition still there ) :highfive:
Hello there: I can't pair my H2 with my iPhone. please help me.
m_laendle said:
Hello there: I can't pair my H2 with my iPhone. please help me.
Click to expand...
Click to collapse
I've never used a rotten-apple-phone and I'll never use it. Sorry, cannot help u :good:
My computer don´t recognize my H2 smartwatch.
My computer is Lenovo with windows 10
enciso89 said:
My computer don´t recognize my H2 smartwatch.
My computer is Lenovo with windows 10
Click to expand...
Click to collapse
Try to install H2 drivers
H2 keeps restarting
Hello,
My H2 keeps restarting when connected to the charger, shows balloon, then logo begins to appear, music starts and then suddenly shuts down. This is happening when connected to the socket charger only. Without charger it's dead, can not check percentage of charge.
Tried to connect to flash tool, the device appears connected to the port but after couple of seconds is getting disconnected, then connects itself and disconnects again. This loop continues all the time. Can not download anything into the phone.
Any ideas to help with?
---------- Post added at 05:44 PM ---------- Previous post was at 05:36 PM ----------
Tried to disconnect battery and connect to PC without battery, no change-same endless restarting
mokledmama2 said:
Hello,
My H2 keeps restarting when connected to the charger, shows balloon, then logo begins to appear, music starts and then suddenly shuts down. This is happening when connected to the socket charger only. Without charger it's dead, can not check percentage of charge.
Tried to connect to flash tool, the device appears connected to the port but after couple of seconds is getting disconnected, then connects itself and disconnects again. This loop continues all the time. Can not download anything into the phone.
Any ideas to help with?
---------- Post added at 05:44 PM ---------- Previous post was at 05:36 PM ----------
Tried to disconnect battery and connect to PC without battery, no change-same endless restarting
Click to expand...
Click to collapse
It sounds totally dead, sorry