Database Users

My phone is stuck on the android screen (X5)

I have ideos X5. I flashed B522. Next day, touch screen freezed. I restart phone and phone is stuck on the android screen(android animation). I tried to flash diffrent stock roms but "Update failed" in all of them. Can you help me, please?
Sorry for my bad English.

Does it fail on the first part, unpacking? or the second part?

xmsnx said:
Does it fail on the first part, unpacking? or the second part?
Click to expand...
Click to collapse
it usually fail the second part. any ideas?

That's the issue I have too, it seems it is bricked because the bootloader is locked. I would recommend just getting a warranty repair on it. I was refused that because I have already had a motherboard changed and now they refuse to do it again.
http://forum.xda-developers.com/showthread.php?t=1524668 3rd post
I just found this thread today, but I am having a problem downloading the file.
If you can download the file and open it, you could upload it somewhere for me. I can try it out on my phone first if you want.

xmsnx said:
That's the issue I have too, it seems it is bricked because the bootloader is locked. I would recommend just getting a warranty repair on it. I was refused that because I have already had a motherboard changed and now they refuse to do it again.
http://forum.xda-developers.com/showthread.php?t=1524668 3rd post
I just found this thread today, but I am having a problem downloading the file.
If you can download the file and open it, you could upload it somewhere for me. I can try it out on my phone first if you want.
Click to expand...
Click to collapse
I dowloading it. When it finished, I will upload to mediafire.

Thanks, really hope this works

xmsnx said:
Thanks, really hope this works
Click to expand...
Click to collapse
It downloaded in two hours. I hope this works. I am waiting for your message.
mediafire com/?1hbk6n46hgamyt6
(put " . " betwen mediafire with com )

Ok that's unlocked the pink screen, I can see the image partition on my PC again!!
Now i need to figure out how to get a working recovery, it wasn't working before but now I get a blue screen on recovery. Just got to figure this out but it's looking better than it was

xmsnx said:
Ok that's unlocked the pink screen, I can see the image partition on my PC again!!
Now i need to figure out how to get a working recovery, it wasn't working before but now I get a blue screen on recovery. Just got to figure this out but it's looking better than it was
Click to expand...
Click to collapse
How to unlocked the pink screen? What do I do, now?

After you download it, unzip it and take the UPDATE.APP and put it in a folder dload and move it to your sdcard. Then hold vol+/- and power, let it flash. Pull the battery after it has restarted and go into pink screen again and plug in to your PC

xmsnx said:
After you download it, unzip it and take the UPDATE.APP and put it in a folder dload and move it to your sdcard. Then hold vol+/- and power, let it flash. Pull the battery after it has restarted and go into pink screen again and plug in to your PC
Click to expand...
Click to collapse
Thank you for answer. But I put dload folder in the pink screen partition. Now, that partition locked. Version 2.3 installed now. I can't see the internal SD on my PC.
I will try it. I write the result.

Yes!!!! My phone works"!!!!!!!
---------- Post added at 11:21 PM ---------- Previous post was at 11:05 PM ----------
Ok here's what I did
Download mediafire.com/?1hbk6n46hgamyt6
Unzip it, and find UPDATE.APP
Put UPDATE.APP in a dload folder and upload to empty sdcard.
Put sdcard in phone, and hold vol+/- and power and flash it.
After phone has restarted pull battery.
Download http://www.mediafire.com/?6hrfz36b8e2vw87
Unzip and copy the dload folder to empty sdcard.
Hold vol+/- and power and flash it.
After it fails near the end or if it restarts then pull battery.
Download a rooted boot.img and a clockworkmod recovery.img (got both mine from links at modaco)
Attach phone to PC in pink screen mode and delete the boot.img and recover.img files.
Upload the downloaded root.img and recovery.img to image folder in phone.
Download any custom rom from XDA, I used http://forum.xda-developers.com/showthread.php?t=1475687 and upload it to sdcard
Pull battery.
Hold vol+ and power and go into clockworkmod, wipe everything and flash the custom rom!!
Good luck!

xmsnx said:
Yes!!!! My phone works"!!!!!!!
Click to expand...
Click to collapse
I am glad for you.
I connected the phone to my PC and drivers installed. But I can't see the partitions on computer. I use Windows 7. Any ideas? help me
The drivers were found by computer:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

storm 1905 said:
I am glad for you.
I connected the phone to my PC and drivers installed. But I can't see the partitions on computer. I use Windows 7. Any ideas? help me
The drivers were found by computer:
Click to expand...
Click to collapse
Try hisuite It's drivers are prefect

Yeah I think I have HiSuite installed already too so the drivers were from there.
You should only see 1 partition anyway.
But it looks like the pink screen is unlocked because before it says drivers not found when the bootloader is locked.
Try unplugging and plugging in again.

Tmp341 said:
Try hisuite It's drivers are prefect
Click to expand...
Click to collapse
I tried HiSuite. But Hi Suite say Android device don't connect.

No I meant just for the drivers it installs.
Try again from the beginning, it should work for you.
Sent from my Galaxy far, far away!

xmsnx said:
No I meant just for the drivers it installs.
Try again from the beginning, it should work for you.
Sent from my Galaxy far, far away!
Click to expand...
Click to collapse
I was confused. What will I do, now?

Just follow the steps again from the start. See if that helps
Sent from my Galaxy far, far away!

storm 1905 said:
I was confused. What will I do, now?
Click to expand...
Click to collapse
There is a setting in Help/Online Update(Or Similar)/Settings.Tick the option if it isn't.Like: check for drivers .....

[Q] Help! Lenovo yoga 2 tab 1050L broke

My yoga 2 1050L broke while I tried to flash it with:
"Rooted_YT2_10_prc_call-blankphone-user-YT2-1050LC_USR_S000018_1409241649_WW21_CN"
It was flashing well untile 88% "unknown commend"
now I'm getting "EFI BOOT FAIL HARD DRIVE" and it's keep opening the bios,
and I can't even flash it with the 1050L stock rom

??????????????

MohamedStar said:
??????????????
Click to expand...
Click to collapse
1. power off the tablet if it's on (long press pwr btn until shuts off)
2. press and hold Vol+ & Vol- keys, while keeping them pressed press shortly(2-3 sec) PwrOn btn to start tablet, keep Vol keys pressed until the screen says: starting fastboot.. after you can release them (this fastboot mode is different in regards to the standard one as it is started directly from BIOS, disregarding what you have/or not have on your hard drive, so it's good for unbricking), the screen will remain unchanged to the starting fastboot message, but that's ok, the bios is waiting commands already
3. flash your stock ROM as usual (use flash.xml file) using Intel Flash Tool
for root use the much more simpler(generic and safe) method described here http://forum.xda-developers.com/showpost.php?p=62815888&postcount=698

Please Help!!!!!!
ionioni said:
1. power off the tablet if it's on (long press pwr btn until shuts off)
2. press and hold Vol+ & Vol- keys, while keeping them pressed press shortly(2-3 sec) PwrOn btn to start tablet, keep Vol keys pressed until the screen says: starting fastboot.. after you can release them (this fastboot mode is different in regards to the standard one as it is started directly from BIOS, disregarding what you have/or not have on your hard drive, so it's good for unbricking), the screen will remain unchanged to the starting fastboot message, but that's ok, the bios is waiting commands already
3. flash your stock ROM as usual (use flash.xml file) using Intel Flash Tool
for root use the much more simpler(generic and safe) method described here http://forum.xda-developers.com/showpost.php?p=62815888&postcount=698
Click to expand...
Click to collapse
sorry to say but the following didn't work for me still stuck in bios and Flash Tool keeps saying
05/26/16 00:07:14.679 INFO : Port 0/10: Rebooting BaytrailD13EBC1E in Provisonning OS (current state = DNX_STATUS)
05/26/16 00:07:14.679 INFO : Port 0/10: Cannot Reboot android device, status is DNX_STATUS
so now what need to fix this device!! PLEASE HELP!! ;-(

TechTanium said:
sorry to say but the following didn't work for me still stuck in bios and Flash Tool keeps saying
05/26/16 00:07:14.679 INFO : Port 0/10: Rebooting BaytrailD13EBC1E in Provisonning OS (current state = DNX_STATUS)
05/26/16 00:07:14.679 INFO : Port 0/10: Cannot Reboot android device, status is DNX_STATUS
so now what need to fix this device!! PLEASE HELP!! ;-(
Click to expand...
Click to collapse
Try this
http://www.teamandroid.com/2012/07/30/how-to-set-up-adb-fastboot-with-android-sdk/3/
Don't unplug the USB, every time u unplug the USB you must update the driver again
I don't know if this'll work for you I'm not developer but you can try.

ok tryed to follow that tortorial but when I get to devece manager step I get this for my tablet on fastboot + usb conected !!
Screen shot
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
PLEASE HELP NEED MY TAB TO WORK!! ;-((
MohamedStar said:
Try this
Don't unplug the USB, every time u unplug the USB you must update the driver again
I don't know if this'll work for you I'm not developer but you can try.
Click to expand...
Click to collapse
---------- Post added at 12:40 AM ---------- Previous post was at 12:33 AM ----------
ok tryed to follow that tortorial but when I get to devece manager step I get this for my tablet on fastboot + usb conected !!
Screen shot Gyazo Screen shot number 7d530b85044c23739eab9a4df4c2d826
PLEASE HELP NEED MY TAB TO WORK!! ;-((
MohamedStar said:
Try this
Don't unplug the USB, every time u unplug the USB you must update the driver again
I don't know if this'll work for you I'm not developer but you can try.
Click to expand...
Click to collapse

TechTanium said:
ok tryed to follow that tortorial but when I get to devece manager step I get this for my tablet on fastboot + usb conected !!
Screen shot
PLEASE HELP NEED MY TAB TO WORK!! ;-((
---------- Post added at 12:40 AM ---------- Previous post was at 12:33 AM ----------
ok tryed to follow that tortorial but when I get to devece manager step I get this for my tablet on fastboot + usb conected !!
Screen shot Gyazo Screen shot number 7d530b85044c23739eab9a4df4c2d826
PLEASE HELP NEED MY TAB TO WORK!! ;-((
Click to expand...
Click to collapse
If u able to go throw fastboot then try to flash kitkat bios from this and (just follow the instructor):
http://forum.xda-developers.com/attachment.php?attachmentid=3783701&stc=1&d=1465980824
after that just flash any kitkat rom, good luck.

MohamedStar said:
If u able to go throw fastboot then try to flash kitkat bios from this and (just follow the instructor):
http://forum.xda-developers.com/attachment.php?attachmentid=3783701&stc=1&d=1465980824
after that just flash any kitkat rom, good luck.
Click to expand...
Click to collapse
Dear MohamedStar
Thanks a lot for attaching the link above, you saved me from an boot failure efi hard drive issue. Thanks a gain

samehhakim said:
Dear MohamedStar
Thanks a lot for attaching the link above, you saved me from an boot failure efi hard drive issue. Thanks a gain
Click to expand...
Click to collapse
I'm glad it helped :good:

Thank you so much man for the replys Really
MohamedStar said:
If u able to go throw fastboot then try to flash kitkat bios from this and (just follow the instructor):
http://forum.xda-developers.com/attachment.php?attachmentid=3783701&stc=1&d=1465980824
after that just flash any kitkat rom, good luck.
Click to expand...
Click to collapse
I did the following and theoretically it should work perfectly but it still comes up with this https://gyazo.com/33d795031aeda6a8710af55da541651f
I don't understand ??? phone flash tool says it is in DNX mode this says its not!!???

QuietLife said:
If u able to go throw fastboot then try to flash kitkat bios from this and (just follow the instructor):
http://forum.xda-developers.com/attachment.php?attachmentid=3783701&stc=1&d=1465980824
after that just flash any kitkat rom, good luck.
Click to expand...
Click to collapse
i plugged my lenovo yoga tab 2 1050L in fastboot starting, then select 'c' to continue in the tool, but the program is stucked in "Sending files for booting in fastboot mode" and while waiting the screen in my tablet just shut down and nothing happened. Intel Flash Tool just turn on the device but can't detect it.

[LG G5 back to Stock] [H850 Europe] [Full Wipe]

Just tried on my device H850 and other two EU Variant with success and no problem.
Prerequisites :
1. have just installed right G5 Drivers here
2. make a backup using LG Bridge (optional)
3. download and install right LGUP version here (if you have installed another one remove it before)
4. download and install H850 DLL file here
5. Download right KDZ for your variant. In this case we will use H85010c provided by @autoprime here
Here we go.
Installation guide:
1. Power Off device
2. By pressing Vol Up button connect device to your pc and wait Download Mode screen it appears on device
3. Start LGUP , check Bin file and select your KDZ
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
4. Select REFURBISH in "Process" panel
5. Close LGUP and open it again
6. click to START to begin Stock Clean Reflash
7. wait that in "Step" panel you have "Complete" status and don't disconnect device from pc until % is = 100%
Finish
Credit :
@autoprime for KDZ
@asialove2013 for LGUP and DLL right version installers

oh wow, that is just amazing. I was holding off rooting my device till there is a way to get back to stock and now it seems we have a way.
Does the warning triangle/message disappears after stock flash ?

_ray_ said:
oh wow, that is just amazing. I was holding off rooting my device till there is a way to get back to stock and now it seems we have a way.
Does the warning triangle/message disappears after stock flash ?
Click to expand...
Click to collapse
Always there

wolfgart said:
Always there
Click to expand...
Click to collapse
Bummer, i dont understand even after flashing stock why would it still show warning ?

_ray_ said:
Bummer, i dont understand even after flashing stock why would it still show warning ?
Click to expand...
Click to collapse
Because if you unlock bootloader, you can' t relock it

wolfgart said:
Because if you unlock bootloader, you can' t relock it
Click to expand...
Click to collapse
ahh i see now. thanks

I've installed LG Up version you linked in windows 10, but process tab doesn't appear, so I cannot check refurbish or upgrade.

failax said:
I've installed LG Up version you linked in windows 10, but process tab doesn't appear, so I cannot check refurbish or upgrade.
Click to expand...
Click to collapse
Make screenshot

wolfgart said:
Make screenshot
Click to expand...
Click to collapse

failax said:
Click to expand...
Click to collapse
problem is your pc
You have opened sw in multiple widows ...

wolfgart said:
problem is your pc
You have opened sw in multiple widows ...
Click to expand...
Click to collapse
I rebooted the pc but I have the same problem.With Lg up for Lg g4 i hadn't this problem, can I use that version?

failax said:
I rebooted the pc but I have the same problem.With Lg up for Lg g4 i hadn't this problem, can I use that version?
Click to expand...
Click to collapse
Problem is not LGUP version but your Windows.
You should clear you registry from all traces of previous LGUP versions, reboot, and reinstall him

wolfgart said:
Problem is not LGUP version but your Windows.
You should clear you registry from all traces of previous LGUP versions, reboot, and reinstall him
Click to expand...
Click to collapse
I clicked on first line where is recognized my device, and process tab has appeared...sorry.

Trying this on my H850, but LG UP shows it as model Unknown and won't let me Select it to continue. It says "You have to select a known model, please."

QuantifyThis said:
Trying this on my H850, but LG UP shows it as model Unknown and won't let me Select it to continue. It says "You have to select a known model, please."
Click to expand...
Click to collapse
be sure tu have installed G5 Drivers and reinstall DLL. Reboot pc and retry

wolfgart said:
be sure tu have installed G5 Drivers and reinstall DLL. Reboot pc and retry
Click to expand...
Click to collapse
Ahh that was it, forgot the DLL.
In LG UP I chose the Upgrade option instead of Refurbish to see what would happen (hoping not to lose all my data and have to restore). Seems to have worked ok, went from 10a to 10c now. Everything working ok so far.
good news: this seems to have fixed the aux/headphone jack static problem in my car. Don't have to use a ground loop isolator any more.

same. it is PC issue
failax said:
Click to expand...
Click to collapse
---------- Post added at 04:26 AM ---------- Previous post was at 04:24 AM ----------
wolfgart said:
be sure tu have installed G5 Drivers and reinstall DLL. Reboot pc and retry
Click to expand...
Click to collapse
Looks like that many guys do not read the guide

I managed to flash the KDZ file. But now, I'm not able to root it again.
fastboot boot twrp does not work (unknown command)
fastboot flash recovery twrp claims to be run successfully, but still the stock recovery is installed. Whcih means: everytime I try to get into recovery mode a full wipe is done. this is really annoying.
According to "fastboot getvar unlocked", the device is still unlocked and, due to this, the unlock image cannot be flashed again.
Do you know what I'm doing wrong here?
Edit: Done. The fifth time it worked. Nevermind. Thank you!

Download link from LGUP not work.
Edit: I geht this error see picture.

Hi, download link for LGUP doesn't work...can you fix it please

Bricked my Huawei Mediapad M3 Btv-DL09C209B009

Hello Everyone, Need Some Help for My Huawei Mediapad m3. So recently my brother took my phone and wanted to root itbut in the end he brick my m3, So I open up the lcd n disconnect the battery cable from the inside n connect it back, then it tried to put it in recovery mode (volume up+power button) and download mode (volume down+power button) and i even try the sdcard and dload method but im not sure if i did the dload method correctly or not. So can anyone help me because no matter what method i try it end up displaying the same msg
btw
1- my table is huawei m3 btv Btv-DL09C209B009
2. the bootloader is unlock
3. i cant go into recovery or download mode or fastboot or rescue mode
4. and i have already tried installing HiSuite on pc but no device is detected even when i change
different usb port and computers
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

Have you tried installing HiSuite on a PC and connecting it to see if some of the recovery tools it has can help?
Sent from my Pixel XL using Tapatalk

ahent said:
Have you tried installing HiSuite on a PC and connecting it to see if some of the recovery tools it has can help?
Sent from my Pixel XL using Tapatalk
Click to expand...
Click to collapse
yes already tried it, my pc cannot detect my device

Does it show this message then boot loop or does it shut down or does it finish loading?
Sent from my Pixel XL using Tapatalk
---------- Post added at 04:11 PM ---------- Previous post was at 04:06 PM ----------
Ok seems like there is a fix, I found this on huawei p9 forum, guy had same problem, I skimmed it but seems like he was able to use SD card to force it to install stock here is url:
https://forum.xda-developers.com/showthread.php?t=3523003
Good luck.
Sent from my Pixel XL using Tapatalk

ahent said:
Does it show this message then boot loop or does it shut down or does it finish loading?
Sent from my Pixel XL using Tapatalk
---------- Post added at 04:11 PM ---------- Previous post was at 04:06 PM ----------
Ok seems like there is a fix, I found this on huawei p9 forum, guy had same problem, I skimmed it but seems like he was able to use SD card to force it to install stock here is url:
https://forum.xda-developers.com/showthread.php?t=3523003
Good luck.
Sent from my Pixel XL using Tapatalk
Click to expand...
Click to collapse
1. when i turn on after the mediapad logo then it shows this message straight away n stay there for a long time
2. ok going to try the "fix" hope it works thanks

ahent said:
Does it show this message then boot loop or does it shut down or does it finish loading?
Sent from my Pixel XL using Tapatalk
---------- Post added at 04:11 PM ---------- Previous post was at 04:06 PM ----------
Ok seems like there is a fix, I found this on huawei p9 forum, guy had same problem, I skimmed it but seems like he was able to use SD card to force it to install stock here is url:
https://forum.xda-developers.com/showthread.php?t=3523003
Good luck.
Sent from my Pixel XL using Tapatalk
Click to expand...
Click to collapse
uhhhh u tried ur fix...thats the dload method....... that only works only is your can boot into recovery menu.... and i cant boot into recovery nor rescue menu.......

Nope like I said I just skimmed it, it sounded like the OP was having a similar problem and thought it would help.
Sent from my Pixel XL using Tapatalk

can you get access to fastboot

trd_jzx100 said:
can you get access to fastboot
Click to expand...
Click to collapse
nop not even fastboot

well your last resort if dload method and you can't access the bootloader or recovery would be dc phoenix. If method 1 doesn't work try method 2. Although it will probably wipe your serial number if you use method 2.

trd_jzx100 said:
well your last resort if dload method and you can't access the bootloader or recovery would be dc phoenix. If method 1 doesn't work try method 2. Although it will probably wipe your serial number if you use method 2.
Click to expand...
Click to collapse
hmmmmm dc phoenix dun even support mediapad m3 k

I have the same problem.
How did you solve it?

I have the same issue.
There doesn't seem to be a way to get into Recovery/eRecovery/Fastboot in order to reflash TWRP or even repair using the dload method.
However, the tablet is not completely bricked. I managed to boot normally using the battery drain method.
Basically left the "Your device is booting now..." screen on all night. Next morning I plugged into a charger and after a few minutes the tablet booted. I waited until it has 20% battery life before I looked at whether or not it was working. it was.
This seems like a decent temporary workaround, but you can't reboot the tablet. If you do it will get stuck at the "Your devices is booting now..." screen again.

If it is turned on again after discharge, it will not boot.
It stops at the same screen. :crying:
_Boondock_ said:
I have the same issue.
There doesn't seem to be a way to get into Recovery/eRecovery/Fastboot in order to reflash TWRP or even repair using the dload method.
However, the tablet is not completely bricked. I managed to boot normally using the battery drain method.
Basically left the "Your device is booting now..." screen on all night. Next morning I plugged into a charger and after a few minutes the tablet booted. I waited until it has 20% battery life before I looked at whether or not it was working. it was.
This seems like a decent temporary workaround, but you can't reboot the tablet. If you do it will get stuck at the "Your devices is booting now..." screen again.
Click to expand...
Click to collapse

Did anyone find to fix,I have same problem now. :'(

Does this issue occur after trying to root the device? Maybe I will do this in the future that's why I am asking. What went wrong then and how can you avoid that state? Sorry for not providing any help.

Borkse said:
Does this issue occur after trying to root the device? Maybe I will do this in the future that's why I am asking. What went wrong then and how can you avoid that state? Sorry for not providing any help.
Click to expand...
Click to collapse
My M3 is fine with root until I try to use suhide. I don't know what step is wrong, It cant go to developer option.
I try to reset factory but It still wrong, then I rollback rom to emui 4.1, It back to normally.
Finally It bacome like this because I try to update to emui 5.0 and unlockbootloader again...
I think it will be fine but It gone forever.
tomorrow I will send it to huawei service center.
May be claim, I do not know how much it costs. :crying::crying:

lumia 520 bricked after flash of android and now showing android in drivers

my lumia 520 is bricked after flash of android but is vibrating and and connecting to pc but showing android in device managment. any solutions?
not detected by cmd or windows device recovery tool.

janjuaalpha said:
my lumia 520 is bricked after flash of android but is vibrating and and connecting to pc but showing android in device managment. any solutions?
not detected by cmd or windows device recovery tool.
Click to expand...
Click to collapse
Try to get into recovery by press the power button and volume + at the same time
If you can get to recovery , you can try it again , or comeback Windows Phone

Ryonic said:
Try to get into recovery by press the power button and volume + at the same time
If you can get to recovery , you can try it again , or comeback Windows Phone
Click to expand...
Click to collapse
it vibrates but shows only android i have tried every key combination.

janjuaalpha said:
it vibrates but shows only android i have tried every key combination.
Click to expand...
Click to collapse
Do you flash the rom yet?, or just install bootloader and recovery?
If your device get bricked after run the uefi2lk.cmd , tell me and i will show you the way to fix it
P/s : Sorry about my bad english skill

i flashed bootloader and recovery and my nokia bricked after that

Ryonic said:
Do you flash the rom yet?, or just install bootloader and recovery?
If your device get bricked after run the uefi2lk.cmd , tell me and i will show you the way to fix it
P/s : Sorry about my bad english skill[
hello plzzz i went restore my nokia lumai 520 andrio TO windows i have backup flash plzzzz send me tuto or video plzzzzzzz
Click to expand...
Click to collapse

janjuaalpha said:
my lumia 520 is bricked after flash of android but is vibrating and and connecting to pc but showing android in device managment. any solutions?
not detected by cmd or windows device recovery tool.
Click to expand...
Click to collapse
You phong is working,just need flash recovery

Ryonic said:
Do you flash the rom yet?, or just install bootloader and recovery?
If your device get bricked after run the uefi2lk.cmd , tell me and i will show you the way to fix it
P/s : Sorry about my bad english skill
Click to expand...
Click to collapse
no i just flashed recovery but tried to flash rom but not sucessful

I'm having a really similar issue that I've had for nearly a whole year after flashing Android. I myself am trying to roll back to WP 8.1 however I cannot flash the hex file (emergency) back.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Also I want to point this out, Lumia 520/521 devices have issues with reading and writing as explained here

So you install the recovery of android already? , if that so , you can't used this way to roll back to WP 8.1
P/s: I've met a lot of error when try to install android on my lumia 520 , and finally , i can't touch or do anything in TWRP because my digitizer is not original . So I rollback to windows 8.1 and sell it
Use should used this tutorial : https://forum.xda-developers.com/no...nt/restore-windows-phone-8-installed-t3608223
You need to have a backup , if you don't , you have to stick with android.
I think all the error when install android on lumia 520/521/525 could all be fixed , except when you have a samsung emmc :fingers-crossed:

Try to enter recovery with fastboot. Connect the Phone to the PC, and open fastboot in cmd and type this:
fastboot oem reboot-recovery
If you installed successfully the recovery, it will appear in the phone. (It may take 30 seconds or less in appear)

Seems people aren't getting the message
Issue Identification:
Although our investigation is not complete, we’d like to share some initial insight into what we’ve uncovered:
Data writing size & speed: It was discovered that some devices are having trouble accepting the recovery image data being flashed. The blocks of data were too large for some devices to handle, and the memory on the device was having trouble with the speed at which the data was being written. In short, devices were getting too much data, too quickly. This would cause the failure as the new software is corrupted.
Small portion of 520/521 devices affected: As we reviewed logs and worked through issue reproduction, we identified the subset of affected 520/521 devices that may encounter this issue. There is no direct way for an end-user to check their device unfortunately, however it is positive news that not all units would experience this issue.
Click to expand...
Click to collapse

janjuaalpha said:
my lumia 520 is bricked after flash of android but is vibrating and and connecting to pc but showing android in device managment. any solutions?
not detected by cmd or windows device recovery tool.
Click to expand...
Click to collapse
Hi I solve it by installing the Compositive ADB interface driver manually, after this the uefi2lk.cmd detects it and completes the installation of twrp .... the bad thing is that there is still no solution for the micro sd, the chip reading , and the camera and the installation of google play services would be excellent if this could be solved at the moment the only thing I have for solution is to return the movila windows thanks to the help :crying::crying::good:

kristiano646 said:
Hi I solve it by installing the Compositive ADB interface driver manually, after this the uefi2lk.cmd detects it and completes the installation of twrp .... the bad thing is that there is still no solution for the micro sd, the chip reading , and the camera and the installation of google play services would be excellent if this could be solved at the moment the only thing I have for solution is to return the movila windows thanks to the help :crying::crying::good:
Click to expand...
Click to collapse
could you please provide me with the drivers? i cant make uefi2lk ro recognize my phone

Ryonic said:
Do you flash the rom yet?, or just install bootloader and recovery?
If your device get bricked after run the uefi2lk.cmd , tell me and i will show you the way to fix it
P/s : Sorry about my bad english skill
Click to expand...
Click to collapse
Hello. My device bricked after run uefi2lk.cmd and don't detecting with any key combinations. I have backup. Please,help me.

thinhx2 said:
You phong is working,just need flash recovery
Click to expand...
Click to collapse
How to do it?
---------- Post added at 02:43 AM ---------- Previous post was at 02:36 AM ----------
Ryonic said:
Do you flash the rom yet?, or just install bootloader and recovery?
If your device get bricked after run the uefi2lk.cmd , tell me and i will show you the way to fix it
P/s : Sorry about my bad english skill
Click to expand...
Click to collapse
What to do?

thinhx2 said:
You phong is working,just need flash recovery
Click to expand...
Click to collapse
hi, i also having similar issue but in my case i have run uefi2lk.cmd command and after that my phone was bricked......
it only shows android in device manager but can not be detected by windows devide recovery tool or cmd......
will you please let me know the solution in detail as i am a beginner in that kind of works....

adityachoudhary368 said:
hi, i also having similar issue but in my case i have run uefi2lk.cmd command and after that my phone was bricked......
it only shows android in device manager but can not be detected by windows devide recovery tool or cmd......
will you please let me know the solution in detail as i am a beginner in that kind of works....
Click to expand...
Click to collapse
Use fastboot,flash twrp for it,install android

My device is stuck in a boot loop on the first load of Lineage OS 13, nothing on my computer can pick up the phone so I can't fastboot or anything like that. I'm a bit stumped, does anyone have any insight?