Database Users

Upgraded through KIES to FROYO buts stuck at BOOTING & VIBRATES

I have just upgraded to FROYO through KIES after 3 HOURS of waiting.
But my is stuck at boot screen & vibrates..
i had tried the recovery but no use.
please help me...

Take the battery out, try recovery mode again.

Or you didnt uninstall your lagfix before updating.. If so, do a factory reset in the recovery console.

i did that by VOLUME UP + HOME + POWER.
it went into recovery mode i did every thing NO USE.
did wipe all data, factory, format sd card. Still no use.
i heard about hard reset VOLUME DOWN + (press & release) POWER
then clear storage.
BUT HARD RESET is not working for me..

Donald Nice said:
Or you didnt uninstall your lagfix before updating.. If so, do a factory reset in the recovery console.
Click to expand...
Click to collapse
i haven't installed any lagfix

If you are able to enter to download mode then try reflashing via odin it should work.

dalepraneeth said:
I have just upgraded to FROYO through KIES after 3 HOURS of waiting.
But my is stuck at boot screen & vibrates..
i had tried the recovery but no use.
please help me...
Click to expand...
Click to collapse
i had the same problem and just Vol Up+Home+Power then did a factory reset and then it started up normally.
i had the root & lagg fix when i updated to Android 2.2 Optus

Mr.Hunk said:
If you are able to enter to download mode then try reflashing via odin it should work.
Click to expand...
Click to collapse
how much time would it take through ODIN for flashing???

I got the same issue here. And my SGS can not boot into download mode by hold 3 buttons.
Anyone knows what's the option for me now?
Thanks

Hi
I had the same issue it vibrated and didn't boot up. Remove SD Card, go to recovery via VOL UP + HOME + POWER button when you see boot screen releae all buttons. You are in recovery mode. Vol up down and select wipe data/ factory reset, confirm and your device shall boot.
My SGS booted after this and Yes I had OCLF lagfix installed, device rooted which I didn't remove prior to update. Now its fine again.

Now i tried to flash it through ODIN.
It was taking a long time so i stopped
it is displaying this
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
[/URL] Uploaded with ImageShack.us[/IMG]
now please help me

dalepraneeth said:
Now i tried to flash it through ODIN.
It was taking a long time so i stopped
it is displaying this
[/URL] Uploaded with ImageShack.us[/IMG]
now please help me
Click to expand...
Click to collapse
From this screen you sholud be able to enter in downloadmode. And, but I'm not sure, from this screen Kies should be able to recover the phone too...
Any way:
Always is a solution.... Search here, on forum, about JIG method to unbrick Galaxy S. You have to made a 301kohms rezistor and connect it on 2 pins from a usb cable. You'll see more pictures, it's easy to made it...
This JIG rezistor will always put the phone in download mode. From here you can reflash with Odin any rom you want.
But, if Odin stopped, there are 2 possibilities: you don't have the phones drivers installed corectly, or (and most important) you don't close Kies from Task Manager before launch Odin. If Kies is runing will take the comm port busy and Odin can't use it to comunicate with the phone.
Always close all Kies applications before flashing with Odin. It's very important.
Good luck.

dentimarius said:
From this screen you sholud be able to enter in downloadmode. And, but I'm not sure, from this screen Kies should be able to recover the phone too...
Click to expand...
Click to collapse
I did not find that recovery.....
does that have to work if KIES pops some recovery of os????

please tell me a way to flash back to
original DDJG4 india firmware...
and is it possible to upgrade to FROYO using KIES after flashing???

have you tried adb search youtube for a tutorial. you can reboot/recovery or download and much much more.
MAKE SURE YOU ARE IN DEBUGGING MODE WITH ADB. and i take out the sim card and ext sd card.
you use commands like c:\androidsdk\tools\adb reboot download
c:\androidsdk\tools\adb reboot recovery
c:\androidsdk\tools\adb reboot
also try apk 3.0 this lets you install apk's via your pc right to your phone, search for z4root apk on this site and use adb to reboot into recovery to apply update.zip
hope this helps, i also have no 3 button combo

dalepraneeth said:
Now i tried to flash it through ODIN.
It was taking a long time so i stopped
it is displaying this
[/URL] Uploaded with ImageShack.us[/IMG]
now please help me
Click to expand...
Click to collapse
Not sure why you would purposly stop Odin while it was running. All you are doing is creating a worse and worse situation for yourself by doing things like that.
It seems to me that you do not know enough about flashing, etc to even be concidering doing so, so... I reccomend that after you finally get your device up and running again that you ONLY flash through Kies and dont do anything else as you will likely end up with one issue after the other...

yiannisthegreek said:
Not sure why you would purposly stop Odin while it was running. All you are doing is creating a worse and worse situation for yourself by doing things like that.
It seems to me that you do not know enough about flashing, etc to even be concidering doing so, so... I reccomend that after you finally get your device up and running again that you ONLY flash through Kies and dont do anything else as you will likely end up with one issue after the other...
Click to expand...
Click to collapse
personally it amazes me when i read some of the horror stories on this site, i find it very couragous that anyone would attempt this without proper research, .
some of the complex hacks i am seeing just aren't needed, yet people risk bricking their phones. Anyway good luck to all who venture in to flashing, you dont learn if you dont try and without mistakes we would not learn as much so thankyou i know no what not to do hi.

I got into the download mode finally by the hairdryer method and load the original optus jg4 rom into the phone, then upgrade to froyo again.
Now everything works fine.

jamyi said:
I got into the download mode finally by the hairdryer method and load the original optus jg4 rom into the phone, then upgrade to froyo again.
Now everything works fine.
Click to expand...
Click to collapse
I searched about the hairdryer method but I don't find anything. Can you help me with a link please?

jamyi said:
I got into the download mode finally by the hairdryer method and load the original optus jg4 rom into the phone, then upgrade to froyo again.
Now everything works fine.
Click to expand...
Click to collapse
I searched about the hairdryer method but I don't find anything. Can you help me with a link please?

[HELP] LG G2 bricked after install TWRP

After i have installed my TWRP i think my LG g2 have bricked
After i restart my phone this is the only thing that appers to me:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
(the blue mark its not problem, always have that)
I know that look like the screen is cracked but the screen was allright until i restart my phone,
please help me

That may just be the white line issue? I have not actually seen it myself but if you do a quick search you should be able to fix it. Worst case you can just boot into download mode and restore to stock, it is software based since it happened after a flash.

The white line issue occurs if you flash a kernel or recovery which is meant for the JDI display but you migh have an LGD. Look or your twrp you flashed is meant for only one. I suggest to check out dr87 twrp recovery since it has display detection.
You didn't bricked your phone, maybe a bit softbricked but further nothing to worry about.

Hi, thanks for the replys
My only problem is that when i connect my phone to my pc doesn't connect it, and only appears the white lines
Can you help me?

wulsic said:
The white line issue occurs if you flash a kernel or recovery which is meant for the JDI display but you migh have an LGD. Look or your twrp you flashed is meant for only one. I suggest to check out dr87 twrp recovery since it has display detection.
You didn't bricked your phone, maybe a bit softbricked but further nothing to worry about.
Click to expand...
Click to collapse
Hi, can you tell me some advices to try to recover my phone to life?
Thanks

Eriio said:
Hi, can you tell me some advices to try to recover my phone to life?
Thanks
Click to expand...
Click to collapse
you can flash maybe with adb sideload in the recovery another kernel,
you can go to download mode and restore to stock.
Is your screen completely white or white lines?

wulsic said:
you can flash maybe with adb sideload in the recovery another kernel,
you can go to download mode and restore to stock.
Is your screen completely white or white lines?
Click to expand...
Click to collapse
I can't, my lg g2 do not connect to my computer, my computer only detect adb android and not my phone.
When i start my phone nothing appens, only the white lines and thats all!
I tried everything but i cant go to download mode, i think the phone does not start

Eriio said:
I can't, my lg g2 do not connect to my computer, my computer only detect adb android and not my phone.
When i start my phone nothing appens, only the white lines and thats all!
I tried everything but i cant go to download mode, i think the phone does not start
Click to expand...
Click to collapse
Wait after you've installed it... Did you install it with a app within Android?
If so then I think it might've flashed it wrong to maybe a wrong partition or what, I will search for you.

wulsic said:
Wait after you've installed it... Did you install it with a app within Android?
If so then I think it might've flashed it wrong to maybe a wrong partition or what, I will search for you.
Click to expand...
Click to collapse
Actually i dont know, the only think i know is that i used to have a recovery installed and I install TWRP too, and when i restart the phone it started with the white lines and do not connect to computer

Eriio said:
Actually i dont know, the only think i know is that i used to have a recovery installed and I install TWRP too, and when i restart the phone it started with the white lines and do not connect to computer
Click to expand...
Click to collapse
I've didn't found really much but you could also check in general/ google for people with the same problem and if nothing works then you have to try that unbricking thing guide where you have to reflash partitions etc.

wulsic said:
I've didn't found really much but you could also check in general/ google for people with the same problem and if nothing works then you have to try that unbricking thing guide where you have to reflash partitions etc.
Click to expand...
Click to collapse
But how can i reflash a partition if my computer dont even recognize my phone?

Eriio said:
But how can i reflash a partition if my computer dont even recognize my phone?
Click to expand...
Click to collapse
The thing is that you need to open your phone then so that's risky. I suggest to google for people with the same problem and maybe search if there's a fix else you maybe got to sell your phone or try that risky way to fix it.

wulsic said:
The thing is that you need to open your phone then so that's risky. I suggest to google for people with the same problem and maybe search if there's a fix else you maybe got to sell your phone or try that risky way to fix it.
Click to expand...
Click to collapse
No one is to stupid to make the same thing that i have made.
There is none problem like mine

Try going to the download mode by powering off the phone completely then holding the vol up button and inserting the USB cable. The usb cable must be connected to your computer.

Eriio said:
After i have installed my TWRP i think my LG g2 have bricked
After i restart my phone this is the only thing that appers to me:
(the blue mark its not problem, always have that)
I know that look like the screen is cracked but the screen was allright until i restart my phone,
please help me
Click to expand...
Click to collapse
mate i have same problem. How can u solve ? plz help me

cnaukai said:
mate i have same problem. How can u solve ? plz help me
Click to expand...
Click to collapse
Hi
There's no problem! I'll explain to you.
The problem is you have a bad kernel instaled and that's why you have the lines. When you power on your phone you can't see but there's a message related to "NO Recovery mode, No download mode", it's "Secure booting error".
So you have to follow all the steps on this tutorial:
http://forum.xda-developers.com/showthread.php?t=2582142
When you have all that done you'll have your phone back!!
The only problem will be (at least for me) the lines will be there in the same, so you have to find the best kernel to your rom
I think that's all, GOOD LUCK!!

Eriio said:
Hi
There's no problem! I'll explain to you.
The problem is you have a bad kernel instaled and that's why you have the lines. When you power on your phone you can't see but there's a message related to "NO Recovery mode, No download mode", it's "Secure booting error".
So you have to follow all the steps on this tutorial:
http://forum.xda-developers.com/showthread.php?t=2582142
When you have all that done you'll have your phone back!!
The only problem will be (at least for me) the lines will be there in the same, so you have to find the best kernel to your rom
I think that's all, GOOD LUCK!!
Click to expand...
Click to collapse
adb not working. No fastboot is there any other way

cnaukai said:
adb not working. No fastboot is there any other way
Click to expand...
Click to collapse
You don't need fastboot!
If you follow all the instructions it will work (i think in the windows too, don't remember if I made it on windows or linux).
You have to install all the drivers, and then you'll do it
If you can't do it, try this:
https://www.youtube.com/watch?v=QK40sjiDq0Y
But i have made the same thing that i sent you (link of xda) and that worked for me!

Eriio said:
You don't need fastboot!
If you follow all the instructions it will work (i think in the windows too, don't remember if I made it on windows or linux).
You have to install all the drivers, and then you'll do it
If you can't do it, try this:
https://www.youtube.com/watch?v=QK40sjiDq0Y
But i have made the same thing that i sent you (link of xda) and that worked for me!
Click to expand...
Click to collapse
How can i run fastboot mode phone

cnaukai said:
How can i run fastboot mode phone
Click to expand...
Click to collapse
You don't need to run anything, when you turn on your phone you don't see but appear a error message. Then if you follow all the instructions (commands) in the tutorial of xda you'll have to delete the img on your phone and replace them with the new ones!
Then you install the original rom or the rom you choose and when it work you'll have to find the best kernel!
If you leave a comment on the tutorial they will help you better!
Anyway you can ask me anything!!
Good Luck!

Repair HuaweiP8Lite

Hello. It can be fixed by yourself?
I had a cell phone connected to a PC for charging only mode. I picked him out of a MicroSD card, reboot and start-up steps.
There was a version of ALE L21C432B551 Singles
Thank you for your help
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

You deleted boot image *facepalm*
Download update.app and unpack it with huawei extractor then use adb command
Fastboot flash boot boot.img
Sent from my Che2-L11 using XDA-Developers mobile app

MarcoPLs said:
You deleted boot image *facepalm*
Download update.app and unpack it with huawei extractor then use adb command
Fastboot flash boot boot.img
Sent from my Che2-L11 using XDA-Developers mobile app
Click to expand...
Click to collapse
Could you me a better description of the process how? I have downloaded ALE L21C432B551.rar size of about 1.60GB

extract update.app from the zip then huawei extractor tool , excrat the boot.img from that update.app then flash it in fast boot mod via the command above
Note: the firmware version on your phone should be B551 too juste like the rom you downloaded

AmINoS007 said:
extract update.app from the zip then huawei extractor tool , excrat the boot.img from that update.app then flash it in fast boot mod via the command above
Note: the firmware version on your phone should be B551 too juste like the rom you downloaded
Click to expand...
Click to collapse
All this mama but I can not connect the phone
What combination of buttons should be used ?
error: device not found

plug it into the laptop and push power button and vol- button together
Drivers need to be installed
---------- Post added at 05:49 PM ---------- Previous post was at 05:48 PM ----------
In case all this does not work
Plug the phone into the laptop and push power button and vol+ and vol- button at the same time , the phone will download and flash rom automaticly from pc but it can take time it depends on your network speed

AmINoS007 said:
plug it into the laptop and push power button and vol- button together
Drivers need to be installed
Click to expand...
Click to collapse
I am still fits on the TV screen, which I above shows. Niejak the lends can not get the PC to at least react to connect mobile

i didn't really understand but to restart the phone keep pushing power button for arround 10 secondes

AmINoS007 said:
i didn't really understand but to restart the phone keep pushing power button for arround 10 secondes
Click to expand...
Click to collapse
Phone can not be switched off. While pressing the power button only restarts. Let him recharge. Yesterday I managed to get to the menu VOL + VOL - and VOL -. Today it is not. I do not know why. Let him recharge and try later.

ok i get it
Good luck

AmINoS007 said:
ok i get it
Good luck
Click to expand...
Click to collapse
Aki driver needs to be installed ?

there is no driver zip as I know , to install drivers you need to connect the phone to pc via Hisuite tool

AmINoS007 said:
there is no driver zip as I know , to install drivers you need to connect the phone to pc via Hisuite tool
Click to expand...
Click to collapse
Just use only this one command?
Fastboot flash boot boot.img

since you only have boot.img problem, yes , just this command

AmINoS007 said:
since you only have boot.img problem, yes , just this command
Click to expand...
Click to collapse
It is possible that after 2 hours charging battery still is not charged? When you disconnect the USB cable so I got to FlashModu and try to turn it on so I immediately shows the logo of charging and the LED flashes twice, steam green

Try this:
Plug in your USB Cable into your computer but NOT to your phone.
Then press and hold Volume Down and plug in your USB Cable into the phone while Holding Volume Down

[SOLVED] Can't boot, can't boot recovery, oem locked, usb debugging disabled

Happened when I was updating twrp:
I downloaded the .img from their website, booted into my older version of twrp, went to flashing pressed the butting in the bottom right corner, selected the file and selected 'recovery'
Said it was successful, so I rebooted, then it wouldn't do anything anymore except for fastboot.
1. Can't boot into recovery
2. Can't boot normally
3. USB debugging disabled
4. oem locked
Only thing I can enter is fastboot.
I followed this guide, but no luck on my end.
https://forums.oneplus.net/threads/...ck-guide-for-a-hard-bricked-oneplus-2.347607/

Have you tried this?
http://forum.xda-developers.com/oneplus-2/general/guide-return-op2-to-100-stock-unbrick-t3229606
and
All in one toolbox by mauronofrio.
I my self had lost recovery myself and flashed stock image in toolbox and then flashed image from above link to restore to stock and started custom rom process again.
Should not erase twrp once recovered if it has reflash your previous version of twrp or hybrid version.
Hope this helps.

passion8059 said:
Have you tried this?
http://forum.xda-developers.com/oneplus-2/general/guide-return-op2-to-100-stock-unbrick-t3229606
and
All in one toolbox by mauronofrio.
I my self had lost recovery myself and flashed stock image in toolbox and then flashed image from above link to restore to stock and started custom rom process again.
Should not erase twrp once recovered if it has reflash your previous version of twrp or hybrid version.
Hope this helps.
Click to expand...
Click to collapse
It's no use because oem is locked. That means I can't flash anything.

toolbox should still help you unlock bootloader again

Just use the Qualcomm factory restore image to return the phone to original shape of things.

passion8059 said:
toolbox should still help you unlock bootloader again
Click to expand...
Click to collapse
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
pitrus- said:
Just use the Qualcomm factory restore image to return the phone to original shape of things.
Click to expand...
Click to collapse
I have no idea how I would do this without being able to flash anything.

Do you mean that the Qualcomm download program also crashes like fastboot? Sounds like you either have some problems with your windows installation or perhaps you haven't searched for and downloaded the Qualcomm restore if your still trying to flash the ordinary way instead of the emergency way.

Was able to fix it when I was messing around. Not sure what I did but it worked.
Thank you for all your help guys

Theevilsocks said:
Was able to fix it when I was messing around. Not sure what I did but it worked.
Thank you for all your help guys
Click to expand...
Click to collapse
I'm having this problem too, and this isn't helpful. What were the last steps, or at least some of them, that you took to get it working? Which toolkit/script/program were you using? etc

Redjax said:
I'm having this problem too, and this isn't helpful. What were the last steps, or at least some of them, that you took to get it working? Which toolkit/script/program were you using? etc
Click to expand...
Click to collapse
I used this tool: http://forum.xda-developers.com/oneplus-2/general/guide-official-op2-stock-reset-to-oos-3-t3402020
I fiddled around a bit with it, but I'm not sure what I did, and I already deleted the files.

Theevilsocks said:
I used this tool: http://forum.xda-developers.com/oneplus-2/general/guide-official-op2-stock-reset-to-oos-3-t3402020
I fiddled around a bit with it, but I'm not sure what I did, and I already deleted the files.
Click to expand...
Click to collapse
Literally JUST finished with this guide, and my OP2 is alive again! I was going to come back and post. Thanks for the link.
Anyone trying to use this guide without success:
There's one very important step I somehow missed. You MUST disconnect your phone, hold the power button for ~15-20 seconds until it's off, and hold the Volume+ button, THEN plug it back in. Your computer will make the "device connected" sound, but the screen will stay black. THIS IS OK! That means you're in a special recovery, which is where you need to be for the tool.
I also installed the certificate file in the folder I downloaded, then rebooted (it did not work before a reboot, but did work after).
So, the steps:
1. Download the files, make sure your signature signing for drivers is off.
2. Install the trusted certificate, then the driver.
3. Reboot PC
4. Power off phone (hold power for 15-20 secs), hold volume+, then connect through USB (wait for device connected sound, screen on phone will still be black)
5. Run the tool (I ran as admin, not sure if that's required)
6. Weep with joy that you finally found a solution that works.

TWRP for Mate 8 EMUI 5.0

Does anyone have a link for twrp to work on andriod nougat? My Device is running the beta version on Andriod N on the mate 8 but i need to take it back a firmware because nothing is working.

Didn't you get the memo?
You were tasked with the responsibility of creating one.
Now PLEASE get to it were all waiting on YOU !
ps Have a nice day.

kdkinc said:
Didn't you get the memo?
You were tasked with the responsibility of creating one.
Now PLEASE get to it were all waiting on YOU !
ps Have a nice day.
Click to expand...
Click to collapse
so there isnt then??

I wish there was.. I'm stuck with my mate 8 and can't do anything but turn it on and off
Need TWRP for Emui 5 too ( can a twrp for the pixel work maybe... at least it'll be for nougat if not for emui .. i just need to copy the /dload folder to my mate 8.. can't do via adb cause i can't turn on usb debugging so no /adb push

Swissguy36 said:
I wish there was.. I'm stuck with my mate 8 and can't do anything but turn it on and off
Need TWRP for Emui 5 too ( can a twrp for the pixel work maybe... at least it'll be for nougat if not for emui .. i just need to copy the /dload folder to my mate 8.. can't do via adb cause i can't turn on usb debugging so no /adb push
Click to expand...
Click to collapse
Fastboot?

gm007 said:
Fastboot?
Click to expand...
Click to collapse
how do i push the dload folder via fastboot?
adb devices gives me no device

Swissguy36 said:
how do i push the dload folder via fastboot?
adb devices gives me no device
Click to expand...
Click to collapse
You need to install the drivers for fastboot,check the device manager the see what is recognized when u connect in fastboot mode.
And check this tool for unbrick maybe it can help you http://forum.xda-developers.com/mate-8/development/rayglobe-italian-knife-t3295526

gm007 said:
You need to install the drivers for fastboot,check the device manager the see what is recognized when u connect in fastboot mode.
Click to expand...
Click to collapse
hold on.. i'll try....
Edit:
pc doesn't recognise my mate 8 at all.. as I said usb debugging can't be turned on...
Rayglobe's Italian Knife doesn't do anything but "updating" please wait since over 5 minutes
Mate 8 is recognised in device manager as Android Bootloader Device.. but /adb devices gives no result

Swissguy36 said:
hold on.. i'll try....
Edit:
pc doesn't recognise my mate 8 at all.. as I said usb debugging can't be turned on...
Rayglobe's Italian Knife doesn't do anything but "updating" please wait since over 5 minutes
plus i downloaded adb drivers for mate 8 , double click install drivers.exe but nothing happens
Click to expand...
Click to collapse
Maybe something wrong with ur pc,it should detect ur phone in device manager.
Knife tool take lot of time to load so wait.

gm007 said:
Maybe something wrong with ur pc,it should detect ur phone in device manager.
Knife tool take lot of time to load so wait.
Click to expand...
Click to collapse
It detects my device in device manager but not in adb devices, henche i cannot copy anything to my phone
Knife tool is "updating" since 25 minutes
Edit:
wget was the problem, once I closed the process, italian knife is working..... reporting back after trying some things

This is. The wrong driver install manual,the name of the driver ..... sooner....

letschky said:
This is. The wrong driver install manual,the name of the driver ..... sooner....
Click to expand...
Click to collapse
OK i'm back with emui 5.0 and the same problem that i can't skip fingerprint setup cause it doesn't let me add a PIN via voice input I'll retry to unbrick with emui 4.0 via italian knife..
---------- Post added at 09:47 AM ---------- Previous post was at 09:35 AM ----------
Now I have following problem..
on EMUI5:
First boot:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Stuck...
If i choose continue without fingerprint setup this happens:
Back to the beginning.
Using the italian knife to unbrick, using the boot.img cust.img recovery.img and system.img from L29B152 update.app this is the error:
So I guess I will have to wait for Twrp Emui 5 to be released, right?

Try unbrick and put nougat firmware files.
Boot to stock recovery and do factory reset.
What happen when you skip the fingerprint setup?

I can enter the wifi password since it's only numbers..
then i get to the google login.. which is letters.. and the voice input doesn't get anything right... : ( i need a goddamn keyboard somehow flashable over adb

Flash nougat latest recovery and you are good to go back to old formware via dload

bluheart said:
Flash nougat latest recovery and you are good to go back to old formware via dload
Click to expand...
Click to collapse
after I factory reset my phone is FPS locked and I can't use fastboot at all... great
---------- Post added at 12:14 PM ---------- Previous post was at 11:15 AM ----------
OMG i regret installing this beta first time ever i regret.... now i'm stuck at google account input.. with my voice.. i have it all done but NOT the @ sign.. saying at sign doesn't work... how can I input a @ ? someone please help

Swissguy36 said:
after I factory reset my phone is FPS locked and I can't use fastboot at all... great
---------- Post added at 12:14 PM ---------- Previous post was at 11:15 AM ----------
OMG i regret installing this beta first time ever i regret.... now i'm stuck at google account input.. with my voice.. i have it all done but NOT the @ sign.. saying at sign doesn't work... how can I input a @ ? someone please help
Click to expand...
Click to collapse
Unlock boot
Let frp remain that way, then dload your region latest firmware. Dont regret fire up

bluheart said:
Unlock boot
Let frp remain that way, then dload your region latest firmware. Dont regret fire up
Click to expand...
Click to collapse
God above helped me find a micro usb - usb adapter and I could fix it all with my pysical keyboard thanks for everyone that was helping now i just need to flash the update.

Good boy

Swissguy36 said:
OK i'm back with emui 5.0 and the same problem that i can't skip fingerprint setup cause it doesn't let me add a PIN via voice input I'll retry to unbrick with emui 4.0 via italian knife..
Click to expand...
Click to collapse
Brother, How did you manage to install Nougat. I am also stuck bootloop. I can only access fastboot and eRecovery. Kindly post here what you did to resolve your issue.