Related
When I connect my Nexus 7 to my Windows XP (SP3) PC via USB, it's obvious the computer recognizes it and it tries to install ADB drivers. Whether I choose to install those drivers or not, I still can't locate my device in the Windows Explorer Tree. I checked Disk Management for the hell of it and nothing but my PC's harddrives were there. There's an attempt to install drivers for "MTP" but that fails and I'm pretty sure that's the cause; however, I'm unable to replicate it, even as I uninstall/reinstall applicable drivers from the device manager the MTP failure never happens anymore. I did some googling and found a thread with someone who had a similiar experience. In turn, I downloaded https://www.box.com/s/2c25e8bc42ecce400afd to try a different set of drivers. Same problem. Driver install is fine for ADB, but still unable to see my device in Windows Explorer. I'm able to successfully connect the device to the PC with PTP for the camera. I can access DCIM and cache which can serve as a work around, but I'm hoping you can provide any ideas you might have. Thank you!
edit - ***resolution***: Ok, I figured it out...I had to disable USB debugging. I don't know if this helped either, but I installed these drivers as an alternative to the drivers that were originally installed: https://www.box.com/s/2c25e8bc42ecce400afd
While connected to PC, I switched to PTP mode because I was about to give up and just use that
I then disabled usb debugging and switched back to MTP at which point the drivers successfully installed and I could now view my device in Windows Explorer. I also believe downloading the drivers in the link above helped since the first crack I took at this was unsuccessful with existing drivers.
install pdanet on pc and it will install drivers for u so it will be recognized
Ok, I figured it out...I had to disable USB debugging. I don't know if this helped either, but I installed these drivers as an alternative to the drivers that were originally installed: https://www.box.com/s/2c25e8bc42ecce400afd
Been battling with this on my XP machine since yesterday. I couldn't even get debugging to work until I installed NakedDriver. And even still, there seems to be no way to get MTP to work without turning debugging off. On my Win7 machine everything worked perfectly, both ADB and MTP, right out of the box. I have the Galaxy Nexus drivers installed on both machines (which I've read are compatible with the N7). I also have the latest version of Windows Media Player (I've read that some older versions have issues with MTP). Is anyone else able to run ADB and MTP on XP?
*edit*
A: Does PDAnet let you use MTP and ADB simultaneously? Because I really don't want to install it if I don't have to. I got rid of it ages ago (too many things starting up at boot time).
B: I have a Galaxy Nexus also, and I have no issues on the XP box.
I wouldn't bother with MTP, it's not always showing the contents of the internal storage properly when viewed in Windows Explorer.
Earlier today when I was trying to set up a backup profile for it, it didn't copy all the files off. On closer inspection I found folders like TitaniumBackup to be completely empty, which is not true according to ES File Explorer on the tablet.
I tried connecting MTP again, with USB Debugging on and off but this made no difference. Also I'm only seeing the Notifications folder instead of 36 folders on the internal storage now, really random how it's working.
asus site now has a usb driver for N7
try that
Nordendorf said:
asus site now has a usb driver for N7
try that
Click to expand...
Click to collapse
Updated with ASUS drivers, still doesn't view internal storage fully.
Salty Wagyu said:
Updated with ASUS drivers, still doesn't view internal storage fully.
Click to expand...
Click to collapse
Same here. No change with the Asus drivers. Still can't use MTP when ADB is turned on.
poo. how do I transfer my audiobooks to this stupid device without working drivers?
1. Please disconnect Nexus7
2. Remove drivers on PC.
3. Toggle ON : Settings->Wireless&Networkings->More->NFC.
4. Re-connect device
Good luck !
GotLoveForAll said:
poo. how do I transfer my audiobooks to this stupid device without working drivers?
Click to expand...
Click to collapse
1. Uncheck MTP, check the one next to it (Camera)
2. Unplug USB
3. Turn off USB Debugging (Uncheck it)
4. Plug in USB
5. Should say connected as camera, then a new window will pop-up allowing you to see your files.
Tell me if it works!
im having trouble too, is there any way to make the device to be recognised as a flash drive?
Internal memory partly invisible from Windows 7 Explorer
Salty Wagyu said:
I wouldn't bother with MTP, it's not always showing the contents of the internal storage properly when viewed in Windows Explorer.
Earlier today when I was trying to set up a backup profile for it, it didn't copy all the files off. On closer inspection I found folders like TitaniumBackup to be completely empty, which is not true according to ES File Explorer on the tablet.
I tried connecting MTP again, with USB Debugging on and off but this made no difference. Also I'm only seeing the Notifications folder instead of 36 folders on the internal storage now, really random how it's working.
Click to expand...
Click to collapse
Same observation here (a few months later) on stock Android 4.1.1 rooted.
It seems that new files in the internal memory remain invisible for a long time, but so far they have become visible eventually, sometimes a day or two later. I have no clue what could possibly cause this, and I have not found any trick or workaround that makes them visible, not even rebooting. Any hint is welcome.
SE4GT said:
1. Uncheck MTP, check the one next to it (Camera)
2. Unplug USB
3. Turn off USB Debugging (Uncheck it)
4. Plug in USB
5. Should say connected as camera, then a new window will pop-up allowing you to see your files.
Tell me if it works!
Click to expand...
Click to collapse
Didn't work. Just shows up as a camera with the limited folder access one would expect.
Workaround
I now use the following workaround.
Install SDrescan from Google Play.
Run it.
If you already had your phone connected to a computer as a media device (MTP) and are watching the contents of your SD card or internal memory in Windows Explorer, press F5 to refresh your view. If not, connect it now.
I'd be curious whether this works for you as well. If it does, press the THANKS button below.
Same issue with an old ibm x40 udated to windows xp pro SP3.
I've installed mtp driver, without success
I've "tried" to install asus driver, without success
I've tried to do as above with the help of the nexus toolkit, without success.
Everytime, the laptop recognize the device as android ADB interface.
Someone could help me?
Thank you in advance
mistershark said:
Everytime, the laptop recognize the device as android ADB interface.
Click to expand...
Click to collapse
Disable USB debugging in your phone.
Same problem with my moto xoom...files not showing in MTP using windows xp...still have not found any solution
hgmichna said:
Disable USB debugging in your phone.
Click to expand...
Click to collapse
+1 have to toggle USB debugging in winXP
hgmichna said:
I now use the following workaround.
Install SDrescan from Google Play.
Run it.
If you already had your phone connected to a computer as a media device (MTP) and are watching the contents of your SD card or internal memory in Windows Explorer, press F5 to refresh your view. If not, connect it now.
I'd be curious whether this works for you as well. If it does, press the THANKS button below.
Click to expand...
Click to collapse
It works! THANKS A LOT!!!
Whenever I plug in my S4, it seems fine. Drivers are installed correctly since I rooted fine and that also means the USB is fine.
The problem arises when I try to copy any file to my phone. It plugs in, allows me to switch it between Camera (PTP) and Media Device (MTP). I have tried turning USB Debugging on and off when transferring files and on both Camera and Media Device.
When I copy a device into any folder or the main card or phone directory, it starts copying, the green bar stops and then after a second the following message comes up:
"This device has either stopped responding or has been disconnected."
It allows me to Stop copying or Skip this file... which is the only file.
Any ideas on what is causing this and what I could do to try and fix it?
Use a different cable or usb port. Something is causing the phone to stop communicating with the computer. Also, make sure you don't have any power saving features enabled that may be turning of power to the usb port in Windows.
I've tried that and it still has the same issue.
Just unrooted and performed a factory reset. My phone is totally stock and doesn't allow me to copy any files onto it.
Does anyone have any idea?
[SOLVED]
Solved this by taking out my SD card, restarting my phone, putting the SD card back in and formatting it.
You can format by going into Settings > More > Storage > (Scroll to bottom) Format SD Card
That's right, it was not easy to find... Thanks!
cruise350 said:
Use a different cable or usb port. Something is causing the phone to stop communicating with the computer. Also, make sure you don't have any power saving features enabled that may be turning of power to the usb port in Windows.
Click to expand...
Click to collapse
Effectively, you have to turn off the ENERGIE ECO on your Tablet.
another way to see that the SDCARD is not responding, is to browse inside the Folders. They seems to be empty.
regards:good:
connection problem solved
FeversMirrors said:
Whenever I plug in my S4, it seems fine. Drivers are installed correctly since I rooted fine and that also means the USB is fine.
The problem arises when I try to copy any file to my phone. It plugs in, allows me to switch it between Camera (PTP) and Media Device (MTP). I have tried turning USB Debugging on and off when transferring files and on both Camera and Media Device.
When I copy a device into any folder or the main card or phone directory, it starts copying, the green bar stops and then after a second the following message comes up:
"This device has either stopped responding or has been disconnected."
It allows me to Stop copying or Skip this file... which is the only file.
Any ideas on what is causing this and what I could do to try and fix it?
Click to expand...
Click to collapse
i was getting the same problem,so i uninstalled the driver and then connected the mobile .
secondly i also have installed wondershare mogile go on my mobile and pc , so when i connected my mobile to pc after uninstalling the driver the mobile go pop up came up for usb installation and it asked for installing the usb driver for mobile go ,it asked me to swithonn the usb debugging ,and it installed the driver then it just worked fine .
may be it was a mobile go problem (any software) or Driver Problem but it helped so no need to format,reset or remove your card . just try this and tell wat helped.thank you.
This is a Driver Problem.
All I had to do was plug the usb cable into the usb port that i installed the device to. My PC won't read the phone right from any other USB port. I hope this helps
Im not sure if this thread is too old or not, just wanted to give my imput on the matter, so I ran into this issue just today but i had never had it before, turns out it was the file, I did everything I could think of : played around again with the USB port selective suspend feature and it wasnt that, plugged into other USP ports, want that, untill I tried copying something else and BINGO, the file got copied, so I tried with a folder full of different files like word, excell APK files etc...and they all went through fine, so next i tried a lange file a movie and it went though fine. the file in question was a nighlyROM apparently it was corrupt, or didnt download properly. So my suggestion is to check if you can copy or transfer other files.:good:
it didn't work for me
you have to fix permissions
it happened to me on my gt-n7100 (Galaxy Note II ) with android 4.4.2, you have to install TWRP (Team Win Recovery Project see how then reboot into recovery select ''advanced'' hen ''Fix Permissions'' that worked for me
you can use chmod to fix this it works too
hudtwalcker said:
Im not sure if this thread is too old or not, just wanted to give my imput on the matter, so I ran into this issue just today but i had never had it before, turns out it was the file, I did everything I could think of : played around again with the USB port selective suspend feature and it wasnt that, plugged into other USP ports, want that, untill I tried copying something else and BINGO, the file got copied, so I tried with a folder full of different files like word, excell APK files etc...and they all went through fine, so next i tried a lange file a movie and it went though fine. the file in question was a nighlyROM apparently it was corrupt, or didnt download properly. So my suggestion is to check if you can copy or transfer other files.:good:
Click to expand...
Click to collapse
:good::good::good:thanks a lot bruh, here i was thinkin i did somethin wrong on my phone but it was the file that had the problem, and the reason for the error
midoucaca said:
it happened to me on my gt-n7100 (Galaxy Note II ) with android 4.4.2, you have to install TWRP (Team Win Recovery Project see how then reboot into recovery select ''advanced'' hen ''Fix Permissions'' that worked for me
you can use chmod to fix this it works too
Click to expand...
Click to collapse
!!!
This did it for me. I already had TWRP installed and after quickly doing this I was able to copy to/from my SD card. It also fixed the problems I was having copying/moving things from internal storage to the SD card using ES.
FYI, It also caused XPosed to break until I rebooted again.
THANKS SO MUCH!
Doing this now, thanks so much! Wonder why that happens.
Didn't work unfortunately. Other files seem to be moving over just fine. All except this 1.6GB file (checked space, that's not the issue), where I cannot send either to Internal or SD Card. Maybe it's a corrupt file?
JJ
eNonsense said:
!!!
This did it for me. I already had TWRP installed and after quickly doing this I was able to copy to/from my SD card. It also fixed the problems I was having copying/moving things from internal storage to the SD card using ES.
FYI, It also caused XPosed to break until I rebooted again.
THANKS SO MUCH!
Click to expand...
Click to collapse
hudtwalcker said:
Im not sure if this thread is too old or not, just wanted to give my imput on the matter, so I ran into this issue just today but i had never had it before, turns out it was the file, I did everything I could think of : played around again with the USB port selective suspend feature and it wasnt that, plugged into other USP ports, want that, untill I tried copying something else and BINGO, the file got copied, so I tried with a folder full of different files like word, excell APK files etc...and they all went through fine, so next i tried a lange file a movie and it went though fine. the file in question was a nighlyROM apparently it was corrupt, or didnt download properly. So my suggestion is to check if you can copy or transfer other files.:good:
Click to expand...
Click to collapse
Yeah! Exactly! I was trying to copy an unfinished movie that was still downloading in torrent. It was stuck at 98.8% and it was playing fine in my computer. Only this file was not copying in my phone. and anyways i couldn't get it to my phone because it never downloaded 100% due to lack of peers, and i could copy other files. This means MTP mode does not allow to copy corrupt or half files and there is no mass transfer mode now a days...
---------- Post added at 08:53 PM ---------- Previous post was at 08:52 PM ----------
I was able to copy the unfinished file by mounting External SD in TWRP btw....
FeversMirrors said:
Whenever I plug in my S4, it seems fine. Drivers are installed correctly since I rooted fine and that also means the USB is fine.
The problem arises when I try to copy any file to my phone. It plugs in, allows me to switch it between Camera (PTP) and Media Device (MTP). I have tried turning USB Debugging on and off when transferring files and on both Camera and Media Device.
When I copy a device into any folder or the main card or phone directory, it starts copying, the green bar stops and then after a second the following message comes up:
"This device has either stopped responding or has been disconnected."
It allows me to Stop copying or Skip this file... which is the only file.
Any ideas on what is causing this and what I could do to try and fix it?
Click to expand...
Click to collapse
I've changed the file type which was a (.zip) to a (.mp3) and transferred the file. It worked.
hudtwalcker said:
Im not sure if this thread is too old or not, just wanted to give my imput on the matter, so I ran into this issue just today but i had never had it before, turns out it was the file, I did everything I could think of : played around again with the USB port selective suspend feature and it wasnt that, plugged into other USP ports, want that, untill I tried copying something else and BINGO, the file got copied, so I tried with a folder full of different files like word, excell APK files etc...and they all went through fine, so next i tried a lange file a movie and it went though fine. the file in question was a nighlyROM apparently it was corrupt, or didnt download properly. So my suggestion is to check if you can copy or transfer other files.:good:
Click to expand...
Click to collapse
This is the answer to this thread!
Guys this is dumb but instead of moving the file that wasn't working onto my SD card, I just moved it to my phone and it worked the first time.
Another fix - go to usb options, set to use as USB 3.0 device
Since this is the first thread that seems to come up when I googled the issue, I'll post the fix here...
though I'm on a Galaxy S5, not the S4. I'm guessing it's the same deal.
When I plugged in with USB and tried to copy a 1.2 gig file, it gave me the error message, though many large files had worked in the past.
I tried a reboot, pulling the SD card, and making sure my USB hubs didn't have the "let windows shut this off to save power" option checked.
So I tried pressing the "Connected as a media device via USB" notification when I slide the notification bar down. There are 3 options, MTP, PTP, or USB 3.0.
I changed to USB 3.0 and the file copied fine, and much faster too, about 1.5 or 2 minutes for 1.2 gigs.
This actually works.... - Raj
Hi
i have nexus 6P and when i connect the device to the pc (win 10) it shows the nexus and i can see the files but if i'm going into one of them it shows me that it empat and i know that there is files over there, it on the "moving files" when it connected to the pc .
the phone without root and with 6.0.1
thank you
When you plug it in, go to your phone and pull down the notification tray. It will say something along the lines of Connected for charging only. Click that. A pop up menu will appear, select Connect for MTP. Your internal storage will be available. If not, you may need to install the necessary drivers.
it's on mtp and i can't see the inside files
Do you mean that when you go into some folders (when browsing on your Win 10 machine), files you know are there are not shown?
Sent from my Nexus 6P using XDA-Developers mobile app
Having same issue. I have to select MTP again manually from Developer Options every time then only I am able to see files. It is really frustrating but I am not able to find any other workaround yet. If someone have any other solution, pls share it.
Soulfulgrey- no, the files are there but when i enter them they seems empty and when i see them at file manager at the device they are full (for example, the camera)
someone?
Same here,
I never had this issue.
I recently updated to MTC19T
Rooted and Xposed as always.
Can connect as MTP "USB for file transfer"
Can see the folders, Download and what not, and even folders under Download, but can't see the files, which I know they are there.
including files under DCIM
Would love to know if there is a fix for it.
Maybe helps:
https://www.youtube.com/watch?v=X0MGt_0_jCQ
Thanks,
That is about Nexus not being able to connect to the PC,
The reported problem is different, connection is fine, but can't see all files.
In the developer options:
USB debugging switch off or switch on
raymondoliviero said:
In the developer options:
USB debugging switch off or switch on
Click to expand...
Click to collapse
On,
Like I said, I can see some files but not all,
I'm suspecting that windows might be caching views and not refreshing.
Will need to test on another pc.
subscribed. i have tons of music filed into categories, then artists. less than half of them show, but i know it's on the internal storage, because I listen to it every day. I can also see said files/folders with ES file explorer
Found the fix. Install the latest Google USB drivers
Sent from my Nexus 6P using XDA-Developers mobile app
Can anyone tell me why when i connect my lenovo k3 the pc doesn't read the storage? It was working before, i could copy paste songs,movies etc but now suddenly it stopped, i didn't update anything, when i use the es file explorer everything is working good, but when i connect it to the pc than my pc does detect the internal and external storage and i can see all the sub folders, but i cannot see the files inside nor copy paste anything in or out, why? Using Vibeui 3.0_1553 Dev.
1.Its conected as Media Device(MTP)
2.USB debugging is enabled
Basically everything as it was when it was working but now its not, wich is weird since i can see all the folders inside but not the files.
If you have a passward active you'll see your files after disabling it!
antoni0007 said:
If you have a passward active you'll see your files after disabling it!
Click to expand...
Click to collapse
Nop, i dont have a password active, any other suggestions?
Armageddonn_mkd said:
Nop, i dont have a password active, any other suggestions?
Click to expand...
Click to collapse
it might be a program that's trying to copy/read your card after your upgrade!
antoni0007 said:
it might be a program that's trying to copy/read your card after your upgrade!
Click to expand...
Click to collapse
I didn't update anything mate...
Have you tried switching usb modes e.g. File transfer? Any of the other modes work?
neocyke said:
Have you tried switching usb modes e.g. File transfer? Any of the other modes work?
Click to expand...
Click to collapse
Yes i have tried the other usb options, charge only than revert back, doesn't seems to help, i just dunno how it can read the phone, it can read the sd card and the internal memory but it doesn't read the files, very weird, if it was the port of the usb or the cable it wouldn't have read the phone at all but it does read it so i dunno what i can do, anyone can help me?
Based on what you're saying, I have to say the fault is most likely at the other end - on the pc. More often than not, something changed on the pc, windows update, antivirus patch, driver update, settings changed by apps etc that kills connections. Quick way to test is to connect your phone to another pc but I guess you already know that. Swapping cables sometimes helps too. I know it does for me. My e-cig usb cable works better than all my other phone maker supplied cables that I've collected over the years. Go figure.
Hello there guys
Since I updated to android 8.1 and the transfer files using usb is not working! While tranfer pictures is! I ve tried to close usb debugging and opening it and it is kot there, i did not care at first but now i want to transfer big files and i can not.
Mahmoud10896 said:
Hello there guys
Since I updated to android 8.1 and the transfer files using usb is not working! While tranfer pictures is! I ve tried to close usb debugging and opening it and it is kot there, i did not care at first but now i want to transfer big files and i can not.
Click to expand...
Click to collapse
You should get a mini notification underneath your quick settings. Select file transfer and should be good to go. The default is USB charging.
Exodusche said:
You should get a mini notification underneath your quick settings. Select file transfer and should be good to go. The default is USB charging.
Click to expand...
Click to collapse
I tried this already, but the device doesn't appear on my PC (running Windows 10) unless i select "transfer pictures" but then i am just limited to pictures.
Mahmoud10896 said:
I tried this already, but the device doesn't appear on my PC (running Windows 10) unless i select "transfer pictures" but then i am just limited to pictures.
Click to expand...
Click to collapse
Try rolling back the driver or uninstalling maybe. Also would try a different chord if you can just in case.