Related
Hi
First post here so please excuse any ignorance.
O2 XDA Exec - standard Rom from O2 website.
Problem started a few hours ago after using the audio out for listening to music via mediaplayer.
My unit was working fine while playing, but later after it had been disconnceted from the stereo I noted that there were no tap sounds.
I first checked the audio settings, all normal the way I always have them.
Next I tried the reset button on the back of the unit, no help there.
I tried plugging in the headphones in and there is perfectly normal audio over the headphone but once removed nothing at all.
Getting more extreme I tried a rom update/fresh start, no luck there either.
Getting even more hardcore I downloaded the assembly/disassembly pdf from this forum to check if there was a physical fault with the 3.5mm audio port. I checked to make sure all the tabs were springing back after an audio jack was removed all seem fine (although at this point I lack a comparision).
Then for a test I rang my own phone from my land line and it seems to ring fine but there is nothing from the mic or either of the earpieces during a call.
I am fast running out of ideas and the last test really perplexed me.
I am almost certain that it is a case of one of the contacts inside the audio port not springing back and therefore cutting out the external audio, giving the device the impression that there is still a headset connected.
I don't want to poke around inside too much as I have so far been able to keep security tabs intact, just in case I need to send it off.
Anybody have any ideas on how to get around this? Is it possible that it is software and not hardware?
Please help as phone is a bit useless sans headset, which I don't really want to be permanetly tied to.
Thanks
Thom
keep plugging and unplugging the headset until it works or you get tired, if it works great, otherwise sent it in for repair.
Does nobody out there have a registry hack workaround for this problem?
When I receive calls its rings and any other sounds come through whilst the phone rings.
There must be a workaround here somewhere???
Had exactly the same problem. No sound but rings ok,
After the first time I plugged in the headphones, no sound. Its probably cause the headphone socket is so big in comparisson, that it gets dirty. Just spray some anti static cleaner on the headphone plug and keep plugging it in.
Worked perfectly for me!!
There is no registry hack because this is a hardware issue, not a software one.
The ringer will ring whether the earphones are plugged in or not, which is how you would expect a phone to function. The problem lies with the connectors in the headphone jack socket not recognising the headphones are unplugged. Resetting and even dare I say a hard reset will not sort it as the issue is not software related.
This has also been covered several times on the forum. The only way (short of taking the thing apart) is to keep plugging / unplugging the headphones until the sound reappears.
Cheers
Ant
This just started happening on my JasJar today (system audio returned after poking the headset in/out a few times), after 11 months of use. Does this get worse over time? Should I bite the bullet and try to get Imate to repair it?
Please advise!
Hi,
I've noticed an audio output distortion of some frequencies when listening to music, in the sound coming out of the 2.5mm jack.
When the speakers on the device is used, there is no problem.
When I plug the headphone, there is sound output, I hear the music, but some frequencies are lowered so much that I can't hear the singers voice. When I unplug, the speakers work fine and I can hear the singer again.
In additon that, most of the background instruments can be heard as well as the backvocals, if they are female.
It's like the sound is being processed (like an equalizer) when I plug the headphone, some frequencies are lowered, given some echo, reverb etc.
I don't understand how this is possible. I am thinking of a hardware contact problem, but it's hard to believe if this is a hw problem.
I've tried two firmwares (2.16.x, 2.25.11.1) and made hard reset also. No result.
Any ideas?
Note: I can try to actually record the sound tonight if anyone wants to hear.
Best regards,
Fast
maybe try a different headset first?....could be a short in the cable, because what you are describing is a phasing issue with the headset speakers......
Thanks for the response Kiru,
Just tried a different headset plugging it into my HAMA 2.5 --> 3.5 adapter. same result.
I will try the original headphone came with the Wizard. If the source of the problem is the HAMA adaptor, this should resolve it. (i hope it is)
Could you please elaborate on the "phasing issue" ?
fastguy said:
Could you please elaborate on the "phasing issue" ?
Click to expand...
Click to collapse
Hmm....how can I explain.....Let's start with the speaker itself. A speaker has two terminals on it, one postive and one negative. What we want is to have the positve from the source (ie. Amplifier) to the positive terminal of the speaker, and the same for the negative. Since there is a pair of speakers, we want them to be hooked-up correctly. If hook-up correctly then the speakers are in phase with each other, and this is called constructive interference, hence in phase. When ONLY ONE of the speakers is hooked-up backwards, we call this destructive interference, hence being out of phase. Being out of phase causes frequencies to cancel or sound muffled. Hope you kind of get what I mean, but I highly doubt that this is the problem with headphones because heaphones nowadays rarely get manufactured with this problem. This is just the electrical part of phasing. Also, you can have one speaker, and it could sound out of phase because of the distance it is firing from walls or the shape of the room due to the reflections of sound, this is called acustical phasing.
A short in the cable, meaning the positve and negative wire are somewhat touching, can cause a similar effect, and I suspect that this is problem for you. As you now state that you are using an 2.5 to 3.5 adaptor, I would agree with you that most likey you have a faulty adaptor.
Hope this helps! and keep me posted!
Hi again,
Thanks again for the explanation Kiru, I know a bit of electronics so I got the problem.
However, I'm now home and tried to original headset, no result. The same problem is existing.
This makes me believe that I've broken something inside the Wizard which shortcircuits something. I'm very dissapointed.
Maybe the only way is now to buy a stereo bluetooth headset...
Thanks for your help
Any reason that you can't return to orange for repair/replacement?
PROBLEM SOLVED
I got this unit from priceminister second hand. It's origin is not France, I don't have a purchase receipt neither.
By the way, I solved the problem. I disassambled the unit using the info given in one of the posts in the forum. I played a little with the contacts, there was oxidation in the outer solders, i cleared them up etc, it 's working at the moment.
I'll post some pictures afterwards.
and I hope i will be able to reassamble it, I already have a piece of thing which I don't know where to put
I got the same problem. Was working fine for 2 months then all of a sudden the headphone plug is all messed up. Volume is all distorted I can sometimes hear a song but quality is no where near the original. Usually everything sounds echoed. I think something is wrong with the plug
I've had the same problem. The headphone jack on the Wizard is crap. If you have your Wizard in your pocket with an adapter, as you move, the adapter pries back and forth on the jack. This breaks the cheap jack.
If you want to listen to your Wizard as an music player, you should invest in a nice set of bluetooth headphones and only plug the jack in when the wizard won't be moved around a lot, like a home or car stereo.
I recommend Nextlink Spider headphones. They double as a headset and you can navigate through your library with the button on them.
MUSIC Speed
I got the same problem here. The SE stereo btooth headset isnt yet in our place.
Anyway, i experienced this one with ROM2.16 Imate. The sound speed or music speed seems to being played faster than normal. But when i tried to plug the 2.3-3.5 adopter and quickly pull it out, the sound is played in normal speed then. strange.....
are you all sure that the wizard has a stereo output ? I thought it was mono.
Anyway you can get earpieces and headphones with a 2.5mm jack so you don't need a 2.5-3.5mm adapter.
Maybe the contacts on your jack are not connecting properly with the internal contacts of your adaptor
I have found some strange behaviour that i'm hoping someone else can test out on their Galaxy S.
I have found that some headphones seem to work fine with the phone for music playing but others result in the sound being distorted with the vocals being very faint as if the left and right channel are cancelling each other out (with vocals generally being on left and right channel).
The packaged Samsung headphones appear to work properly although the quality seems average. I tried my iPhone headphones but these resulted in the strange sound distortion described above. I also tried a pair of cheap Sennheiser which were a free give away with a purchase from Richer Sounds and they worked well. Another pair of no-name cheap headphones exhibited the same distortion problems as the iPhone headphones.
Oddly, the FM radio sounded ok with all the headphones, it's just the music player that has the problem. I have also tried a couple of other music apps including the doubletwist player to rule out the software.
I'm considering taking it back to the shop to swap for a replacement. I'd be grateful if anyone could try out some headphones (particularly iPhone ones) on their Galaxy S and report their results to see if this is just a quirk with my phone or the Galaxy S in general.
Many Thanks
I just need some clarification because I know that a headset, and not headphones, is delivered with the Iphone. If it was a headset then I might suspect that different Iphones use different polarity as opposed to Samsung. Try out the Samsung headset on the Iphone.
EDIT:
Obviously not the problem. I must have skipped over the radio experience.
I can't post a link to it, but I remembered that GSMArena did a thorough review of the SGS. If you find your way to it, go to page 6 and see the sound chart at the bottom. SGS is superior in sound to iPhone. Perhaps the iPhone headset/headphones and the cheap ones are not sufficient for the SGS? I'm guessing
I had a similar experience when I tried to use the Samsung Spica headset on my HTC Hero. It seems that it might be a difference in polarity as suggested above.
Does all the headsets that give distorted sounds have a microphone on them? (E.g. not headphones)
the iPhone's headphones have extremely high distortion regardless of the media using to play them. The SGS is probably just overpowering them because they are very loud headphones as well/easily powered.
No it's nothing to do with them being overpowered.
I have an expensive pair of etymotic in ear headphones that are exhibiting the very same problem. Strangely I found a fix. They have a microphone on them and pressing in the answer button on them seems to fix the problem. I have taped the button down now and everything works perfectly. The second that button is released though, everything goes back to being faint, muffled and distorted.
Odd!
PS. This isn't just with the music player. I noticed it first watching a video.
It sounds like Samsung has their own way of producing the 3.5mm port with regards to the microphone support.
The Samsung headset distorts music on my HTC Hero.
The HTC headset distorts music on my gfs Galaxy Spica
To be clear, are you saying the problem only affects headsets with microphones? I have etymotic er4p headphones and it would be a deal breaker if they didn't work right with this phone.
If its only showing up in the media player, check that you havent enabled the 5.1 button in the the top right of the player. This can really screw with the sound and entire frequency ranges can be lost. I'm guessing this is whats happening.
The default headphones work fine for me if a little tinny, but with my Senheissers, the results are very pleasing. Apart from a slight gap between tracks that should seemlessly play through, I prefer using it to my iPod Touch. Being able to change tracks and volume without unlocking is a nice feature.
I threw my iPod headphones out years ago, they're the most ridiculous design ever, with the cable tapping the inside sleeve all the time when you walk or run.
k2snowboards88 said:
To be clear, are you saying the problem only affects headsets with microphones? I have etymotic er4p headphones and it would be a deal breaker if they didn't work right with this phone.
Click to expand...
Click to collapse
It sounds like that the problem is with headsets with microphones, yes. Not sure if it happens with all 3rd party headsets w/ mic though.
Considering you have etymotic, and ClownShoes a few posts up have problems with this brand, I guess you're out of luck unless you wanna tape the answering button like he did.
The er4p is just headphones, so it sounds like i'm in luck.
Got my GS a few days ago and im having exactly the same problem with the Etymotic hf2 Headset with mic. So yeah it looks like it the mic that causes the problems.
sim87 said:
Got my GS a few days ago and im having exactly the same problem with the Etymotic hf2 Headset with mic. So yeah it looks like it the mic that causes the problems.
Click to expand...
Click to collapse
It's a little bit crude, but taping the button down does work.
I have the same issue with with Monster Studios even with the cable without the integrated mic. Would be great to have some sort of fix.
Headphone issues
Just thought I would post what I knew about the issue, both me and my dad purchased the same pair of headphones to use on mp3 players (the headphones are ultimate ears metro fi 220 vi's if I remember correctly, these have an in-line microphone as well as a single button for answering calls and to control music playback). Whilst I experienced no distortion when using them on my iPod Classic, my Dad's Creative player would produce the issues described above - he found that either taping the button down or slightly pulling the headphones out would solve the issue however it ended up annoying him so much that he went back to using another set of headphones.
I don't know what causes the issue but I just thought I would let people know
i have some sennsihaur sport headphones which work fine no problems. i also a monster fm transmitter in the car.. again no problesm.. just make sure the volume is not on max but 1 setting below max.
Hmmmm, a few problems here. Obviously the standard Samsung headphones are fine, no humming, no background noise. However if I connect the following:
1. Standard Apple iPhone (with mic) loads of background noise, humming etc
2. Shure (no mic) loads of background noise, humming etc
3. B&O (no mic) loads of background noise, humming etc
4. Shure (with mic adaptor) loads of background noise, humming etc greatly reduced by pressing the mute key.
Using the Shure adaptor with the others resulting in the same as 4.
Needless to say I'm not happy!
That's too bad. Not being able to use my Shure with the phone renders it useless for music and that IS important.
In the SERVICE MODE *#*#197328640#*#* there is an audio menu
there you can change the headset settings too like NR noise reducion.
i did not test and changed the settings but when i had the samsung omnia2 last year
i had some problems with my headset and fix it in in the sevice menu.
when you gonne do some tests write down the orginal settings before you try.
hope this will help some of you..... and post the results
im sure its the jack, cos the galaxy s has a 4pole trrs at left/right/mic/ground
iphone compatible headset have a 4pole trrs at left/right/ground/mic
thats why pressing the mic button clears up the sound as it closes the circuit
so it a matter of finding an adaptor that switches the mic and ground terminals
I have a tf10vi and im trying to diy one
will post the results
Just saw the post and thought I would check mine again, not that I noticed anything....anyway tried few songs and different types and all are sounding amazing, I use Sure 530 so music needs to be no lower than 256 to get the best out of the phones, most of my music tracks are 320bit.
Hi, does someone have the same experience when connecting a headset to the TF?
I have to adjust the plug very precisely, since it can be pushed further into the device. Otherwise I loose left or right channel.
Is it less than 3.5mm? Or is some of where the wire means the plug (usually chunk of plastic) cut off?
no, it's an almost brand new inear headset which came with my Xperia Neo phone. I assumed the problem being caused by a sloppy assembled connector. If it works fine for everybody else, then it must be an individual defect with my TF
yeah i have a cheap pair of sony headphones and they work fine. just the volume isnt the best....but i know that is a tf issue not a headphone issue.
Yes, volume is a horror. I expected better. Haven't tried volume+ yet, works fine on my android phone.
To be honest, I wouldn't necessarily attribute the volume to the TF101. I have a decent pair of headphones and the volume works fine. Also, I've never noticed anything about the plug being finnicky.
I wasn't complaining about the sound but about the max. volume level. It seems to be a little low on my device. It may comply to some EU laws - I assume.
Anyway since nobody else has issues with the headset connector, I have to check with my dealer.
i'm having a similar issue but not exactly the same.
i used to have a problem with the 3.5" jack only when i plugged it to my surround system- logitech x530. i supposed it was because the signal is being amplified. so when i touched the connection or rotated it at his place it made a lot of loud static noise. i've tried changing cables but the same.
so i've got the lab to replace my transformer's mother board or so, and it is still happening. in fact i've noticed a new problem, this time with just a simple earphones.
when i push the plug a little bit harder into the jack, the sound becomes a bit louder.
wierd stuff... and of course in general the max volume kind of sucks.
I've noticed a similar issue with several of my plug-in phones.... Some work great whilst others either have no sound or mono only.
To me it appears the connector on the TF is simply too picky.
I have a pair of meelectronic A151 armature iems as well as Vsonic GR07, and while i like my music loud, clear, and with a lot of instrument seperation, maxing volume is definitely not needed.
Quick fix would be to flash a Rom/kernel compatible with Supercurio's Voodoo control and install Voodoo. It will be louder and sound clearer.
http://forum.xda-developers.com/showthread.php?p=14914293
Long term fix would be to buy a better pair of iems/headphones. Armatures like the A151s I mentioned above for clarity, a good dynamic driver like Meelec CC51, Sunrise X-cape, if you're a basshead, or VSonic's GR07 if you want a nice combination of both.
I'm quite a bit of an audiophile and while it surely isn't THE best DAC out there, the Wolfson WM8903 is very very good.
Also, depending on what phones you're using, you may just need an external amp, especially if their impedance is rather high.
Edit: I realize I went more into the sound aspect, as it was also being discussed above, but all my iems fit my TF snug just like all my other devices.
Sent from my HTC Eva 4G using Tapatalk
If anything mine is too tight a fit, but works perfectly with any headset I've tried.
So i just got my phone on march4 and i found out 2 major problems on my s7 edge i did a research and seems to be im not the only one with this issue.
1- Bluetooth doesnt work with any wireless speaker i can connect the phone to the speaker but the music come from the phone speaker.
2- the headphone jack make static and horrible noise when you use a aux cable (for example i use my phone on my car with a aux cable and this static breaking noise is problem) now seems to be that the cord doesnt go all the way in into the headphone jack which is a huge concern to me.
3- when you are trying to listen music or audio trough the 2 option above the volume rocker only change the Ringtone volume not the Music/audio volume another big problem.
4- the stock music player is gone
A last i call samsung regardless the problem and they told me they will escalate the situation and they told to go to my carrier to order a replacement if i want to. so people remember you only have 15 days to return or get a replacement if you have the same problem.
All audio related - Sounds handset specific? Good luck on the replacement
Sent from my Nexus 6P using Tapatalk
Has to be defective unit
Sent from my SM-N920W8 using Tapatalk
1- i am using it in my car as bt speaker listening to pandora no prob
2- using jack for speakers at work all night pandora no static (change ur aux maybe?)
3- perfectly working for me
4- i dont see it too lol i see google play music and milk music thats it
I can't believe that these issues could be in all S7! In my opinion, it sounds like it's a faulty handset
We ordered two S7's and we are having the same noise issues with headphones. It makes a horrible noise but only when we are in the house. If you go outside, the noise stops. We have tried various things like disconnecting the wifi and nothing works. The headphones worked fine with the S5
1 is an easy fix simply user error, swipe down on the top of the screen and you should be able to select an "Audio Path/Audio Output" and from there select your speakers or headset. As for the static interference, it's hard to say what the source is from but it only occurs (at least for me) in high volume settings. Either get a shielded aux cable or use a portable amp, which is what I've been doing. If you do return it, keep us updated, I'm curious if if the static is "normal" or a defect.
Samsung's music app can be downloaded from "Galaxy Apps"
My husband and I got an s7 edge as well and we hear the same static noise when it's plugged into the aux cable. I've been thinking about taking it to my att store to see if they can help.
Static noise fix!!!
First you want to open up settings and go into sound and vibrations then you want to scroll down to swap sound quality and effects when you have an aux cable plugged in go ahead and switch the HQ upscaler from off to on and that is your solution to fixing static noises with the galaxy s7 and the galaxy S 7 edge. Everyone's welcome
I'm having the static issue as well. As soon as I touch the headphone jack (on the cord) the static is noticeable. The volume also changes.. Tried 3 different headphones, all the same.
Does this happen to anyone else?
Static issue is gone. However using the audio cable plugged into the auxiliary port in my car the audio sounds as if I'm listening through the speaker on the bottom of the phone but it's coming through the car speakers. I've tried every different setting in sounds and equalizer setting and nothing works. Looks like I may be sending 4 phones back and going with the G5
I am also having issues with the Galaxy S7, static noise from internal speaker and headphones. When you restart the phone it goes away and sounds crystal clear. I am not sure what could be causing this to randomly start, and why doesn't it happen constantly and it goes away when restarting the phone? The Samsung tech support agent said maybe an app I have on my phone is causing it. It happens with YouTube and samsung milk music, I'm not sure why only sometimes. Also it's weird that it happens in both samsung headphones and the internal phone speaker, even at low volumes.
Stock music player is not gone. Its in sam market. Taken away to make the software as bloatwarefree as possible. Blutooth through car speaker also works fine here.
Sent from my SM-G935F using XDA Free mobile app
Just curious if anyone has tried to use an auxiliary cable and plug it into the auxiliary port on their car stereo? How is your audio coming through?
IVIatthew said:
I am also having issues with the Galaxy S7, static noise from internal speaker and headphones. When you restart the phone it goes away and sounds crystal clear. I am not sure what could be causing this to randomly start, and why doesn't it happen constantly and it goes away when restarting the phone? The Samsung tech support agent said maybe an app I have on my phone is causing it. It happens with YouTube and samsung milk music, I'm not sure why only sometimes. Also it's weird that it happens in both samsung headphones and the internal phone speaker, even at low volumes.
Click to expand...
Click to collapse
Mine is having exactly the same issues as yours! The only way to avoid such noise is to use the BLUETOOTH speakers/headphones. What can we do now? Ask samsung to give us a new s7edge to try? Is S7e all like this?
I have a lot of static through car speakers with auxiliary cord
I've now tested 4 different headphones, 3 of them give static at the lightest touch to the headphone jack, 1 works perfectly fine.
I've never had this issue with any phone before and I have no idea what's causing it. UHQ setting doesn't make any difference.. Is it the IP68 rubber inside that's causing it?
I haven't got any of these audio issues, but allow me to list the devices I use:
BT to Mazda 6. No issues.
BT to Sony SBH-80 headphones. No issues.
BT to LG 'sound base' LAP250H. No issues.
Wired to Sennheiser sports headphones. No issues.
What I would say with aux cables, is that the quality of the cable can be the problem. If you've bought a very cheap cable off eBay then you might want to try a better quality cable - see if you're lucky enough to test one from an audio shop but DON'T let them talk you into buying some stupid £20/$20 3.5mm jack.
For bluetooth the phone will need to recognise the device as being able to play audio. There's two bluetooth outputs detected by my Mazda; I can either have the car take audio only, phone only or audio+phone. Now obviously a bluetooth speaker should default to taking audio, but I wonder if the speaker itself is at fault?
jr64007 said:
I have a lot of static through car speakers with auxiliary cord
Click to expand...
Click to collapse
I've tried both of our Galaxy S7 Edge and S7's and different types of audio cables and with every one of them there is a problem with poor volume level where I can max the volume on both the car stereo and the phone and there's no bass. I've even taken them to Best buy and tried them on aftermarket radios and produce the same results. The samsung rep gave me the 800 number to Samsung.
I want to know if it's a hardware or software issue.