Related
hi
my omina 7 of 1 month is broken.
A few weeks ago it wouldnt boot and gave the screen indicating
the phone needs to be plugged into the pc, it then booted ok.
Yesterday it gave the same message but by the time i got it home
the message was gone.
Now it will not boot, it simply cycles through the samsung logo, the three network logo , then back to the samsung logo.
Will be taking it back to the three shop tonight.
is there a way of hard resetting the phone using the buttons?
I have only found info on hard reset from within the OS, which obviously i now cannot get to.
has anyone else had this problem
The only similar problem i found was with a focus
was on the windowsphonesecrets website under the heading restoration error
to hard reset the focus press the power, volume & camera buttons all together. that might do it.
Have you tried taking the battery out of the phone? Heard from someone that that solved the problem...
yes tried taking the battery out
tried it without the sim
let the battery completely drain and tried again
the hard reset button combination didnt work either
just constantly cycling between the samsung and three network logos
three have now sent it off for repair ....
I have a very similar problem. My phone randomly rebooted itself but now it sticks on the Samsung Omnia 7 logo. I've tried removing the battery but nothing.
Is there a Safe Mode I can boot into?
Damn looks like I have the same problem.Was playing a game.Phone rebooted on its own, all I get is the Samsung Omnia 7 screen.
Tried a Hard Reset. I get the options pop up for about 2 seconds asking if I want to format.If I am quick enough to press the Home button nothing happens it just switches off.
Did you try to flash the ROM ?
Me?
No?
Download mode was the only mode that seemed to be recognised by my PC.If it wasn't in warranty I would maybe have tried that, but as it is in warranty I will let T-Mobile deal with it.
my repaired samsung was returned mid january
a few weeks later and the same thing has happened again...
phone froze, switched it off , now will not boot again
it is definitely the same hand set or at least the same outer casing
the bill said it had some parts replaced
I wonder what caused this issue?
I had similar problem and this is how I solved it:
Make sure your Device is switched off (remove and reinsert the battery)
1. Press and hold the Camera, Volume Down, and Power buttons simultaneously.
2. Release Power when the phone vibrates, but continue to hold down Camera and Volume Down.
3. Release Camera and Volume Down when the Format prompt is displayed on screen.
4. Press Windows key twice to confirm the hard reset.
Enjoy your phone now
add 1 to the list, mine is doing thin, formatting doesnt help, reflashing doesnt help.
unless i can find a fix, im without a phone for 15 days while tmob plays with it
any progress?
Since applying the update that Samsung release yesterday I'm having the same problem...
Format didn't work, installing 'older' firmwares (I8700BSEJK1, I8700XENJK1 and I8700DBTJK1) didn't solve any issue
Anybody with more ideas?
I've also had this issue... I think it was caused by forcing the nodo update. Now I've updated it normally using this guide
http://windowsteamblog.com/windows_...spx?utm_source=twitterfeed&utm_medium=twitter
I hope now the problem is solved.
Hi all,
I have had loads of problems with this phone, so I decided to do a factory reset.
It rebooted as normal until it got to the Motoblur setup page
It asks for the Motoblur details to be entered, but once you have entered them and pressed the 'next' button, it goes back to the previous screen instead of the next step and then gets stuck in a never ending loop.
I've tried skipping the sign in process but instead of skipping it, it just goes back to the first Motoblur account setup screen instead.
Out of desperation, I have tried to make several new Motoblur accounts but every single time, it gets to 80% completion, then stops.
I have even left running all night (plugged in) and it still freezes at 80%
I can't do another factory reset because it won't get past the Motoblur setup screen.
I've tried to do a hard reset by holding x and powering the phone on but this doesn't work. It just brings up the triangle and android robot but it does not go to the next step despite me leaving it for several minutes.
Only had it for 7 weeks and am awaiting a response from Expansys on what to do.
Any help from you guys will be greatly appreciated.
Apply a debrand image of your system and do a full wipe
phorenzik said:
I've tried to do a hard reset by holding x and powering the phone on but this doesn't work. It just brings up the triangle and android robot but it does not go to the next step despite me leaving it for several minutes.
Click to expand...
Click to collapse
Have you pressed the @ key when you get to this step with the robot and the triangle? That should bring up the reset menu, and then you use the volume and camera buttons to choose and select the option you require.
Cheers,
Steve.
StevePritchard said:
Have you pressed the @ key when you get to this step with the robot and the triangle? That should bring up the reset menu, and then you use the volume and camera buttons to choose and select the option you require.
Cheers,
Steve.
Click to expand...
Click to collapse
I didn't know you had to press @
Thanks
I've done a hard reset, but I still have the exact same problem.
If I try to input my proper Motoblur details it instantly says connection failed (it doesn't seem to even try to connect as fails the instant you press 'next)
Creating a new account hangs at 80%
Any more ideas before I throw it against a wall?
I notice there was an option to boot from SD in the recovey mode.
Would this allow me to boot an official motorola rom?
If so, where would I get the rom from?
A walkthorugh on exactly how to do this would be appreciated if this method could fix my issues.
I'm really annoyed because I sold my HD2 for this phone and I'm regretting it.
Thanks
phorenzik said:
I didn't know you had to press @
Thanks
I've done a hard reset, but I still have the exact same problem.
If I try to input my proper Motoblur details it instantly says connection failed (it doesn't seem to even try to connect as fails the instant you press 'next)
Creating a new account hangs at 80%
Any more ideas before I throw it against a wall?
Thanks
Click to expand...
Click to collapse
I think you need internet connection in order to validate your account or create a new one. Check your APN settings first, or do it on wifi.
Hi,
I've tried it whilst connected to my wifi router. I've even tried it via the data connection but nothing happens.
It seems that despite the data/wifi connections being there, it just ignores them.
I think this is the issue. It's not connecting and I don't know why
The phone displays the wifi/3G data symbols in the task bar but it doesn't seem to be using them during the Motoblur setup
Mine is dead too!!!
Hello everybody,
Greetings from sunny, flooded, blown away, Queensland Australia!
Long time lurker, first time poster...
I have a...
Vodafone-Australian-2.2-Milestone2
2 weeks old and its an expensive paper weight. It was rooted and thats about it, had a bunch of root required apps on there, installed the bootstrap, but hadnt installed Xrecovery yet.
I was playing around the other day. changing settings, installing and uninstalling a heap of apps, testing them. Some app suggested I restart or it restarted itself, cant recall, and that was the end. Boots until it gets past the M, and then its just bootloop city.
Won't register on comp in RSD or anything. Will boot to stock recovery and cleared cache and data several times, but that didnt fix anything. Won't even charge the battery. It will run an update but has to be signed. Problem is, we havent had any updates yet on these phones in Australia and there are no custom roms. What update.zip could I get to try to fix it, because I think thats about my only hope.
While recovery was wiping the data and cache it would stop frequently and each time I would touch the ok in the bottom corner of the screen and it would continue, and seemingly despite the 10 or more stops, completes fine. Surely thats not normal.
Out of ideas, I would just send it back with a story but the vodafone boot animation is replaced with disco flashing lights. and thats all it does, non-stop. Do you think they will notice someone has been tinkering?
Ideas? Thoughts?
Oh, and forgot to mention, when I first got it I had the same problem with the Motorola sign in wizard on startup, for quite a while, cant remember how I got around it though. Stop trying to sign in and just get out of that wizard, install ADW Launcher or similar and dont go near any Moto apps. You are only required to do a Gmail sign in, not Moto.
That's the problem though.
I'm stuck at the Motoblur sign in and it will not skip.
Whenever I select skip, it just goes back to the motoblur sign in page instead of going to the home screen.
Basically, in a nutshell, this is what's wrong:
I can't sign in to motoblur (gets stuck in a loop)
I can't create a new motoblur account (crashes at 80% every time)
I can't skip the sign in process (takes me back to the motoblur sign in page instead of loading home screen)
This is my first and last Motorola phone. Not good at all.
So what happens if you press press home or back repeatedly instead of skip? And if all fails reflash new SBF
benking1972 said:
So what happens if you press press home or back repeatedly instead of skip? And if all fails reflash new SBF
Click to expand...
Click to collapse
It just goes back to the motoblur setup/signin screen no matter how many time I press home, back or skip. It's as if a dll is missing and it's unable to boot to the home screen.
How do I flash a new SBF?
Motorola have agreed to let me return it but if I can do it myself I'd rather do it.
I have found this guide http://forum.xda-developers.com/showthread.php?p=11155476#post11155476
but the link to the UK SBF is dead
Yeah, that's the one, and the link to UK SBF works fine for me. If you can't get it to flash that way, then you are going to have to do it the way I am about to do mine, which is...
http://forum.xda-developers.com/showthread.php?t=804088
Failing that, send it back and be done with it.
since its so new id send it back. you shouldnt be having this problem at all. the milestone 2 is a very solid phone. i had mine running for 90 days straight not even a reboot or crash or anything lol. sounds like you just got a duff one. with any piece of technology theres bound to be a few that slip through the net. even if you find a fix for your problem you dont know what is causing it. and if youve had problems before then somethings obviously wrong. since theyve agreed to let you return it then thats your best option.
Probably i should send mine one back as well.
Bought a new Milestone 2 yesterday (from ebay, Chinese guys but as per retail package phones are for UK market). Put the SIM in just to check before wiping out everything from my old Defy. Made a call, checked the version and the menu and put the SIM back to Defy to backup all I needed. Plugged Milestone to the mains. 3 hours later found promising "Fully charged" on the screen and put the SIM in. That was it... Since I can't power the phone whatever I do. I thought the Power button went off as I tried to perform hard reset (x+Pwr), BRM (Arrow up+Pwr) and nothing happent at all. But then I put the phone on the charger again and the Power button worked fine switching the screen off and back on.
Any other methods to get the phone running?
UPDATE: It's strange and weird, but I've just had an idea to remove SD card and it worked - the phone powered on immediately!! Formatted the card using card reader, put it back - the phone works flawlessly. Fantastic! =))
Greeting
I ask someone for help. My Samsung E900 has worked perfectly until yesterday ... After changing the Regional Settings sought to be restarted to accept new settings. After that phone at the time of ignition appears LG logo and the fit is a few seconds the screen clears and the LG logo appears again, and so constantly ..
Any ideas?
Thanks
Update - Problem resolved
Hi
I resolved the problem ... means COOLD START is on the keys...
Hold down the VOLUME + - and the CAMERA button and turn the POWER button the phone ...
Phone back to factory settings
Samsung? LOL. And I think this will work even if you don't hold the camera button, but I must try it again...
LG
sorry LG not Samsung LOL
Reset want do the job
Any other ideas?
After a reset i have the same symptoms again.
thx anyway
That's weird!
solved?
did u solve the it?
i have the same problem, it freezes on the "LG" screen, nothing more happens....
i tried the cold boot thingy but then it just sais "cold boot" and then nothing happens...
any one knows if there is something that can be done to make it work?
lamanfluff said:
did u solve the it?
i have the same problem, it freezes on the "LG" screen, nothing more happens....
i tried the cold boot thingy but then it just sais "cold boot" and then nothing happens...
any one knows if there is something that can be done to make it work?
Click to expand...
Click to collapse
Pulling the battery for 10-30 secs and then boot seems to be the universal problem solver for WP7 phones.
/J
my phone was delivered without the battery inserted, it it was out for like a couple of days. Still gets stuck at the "LG" screen...
lamanfluff said:
my phone was delivered without the battery inserted, it it was out for like a couple of days. Still gets stuck at the "LG" screen...
Click to expand...
Click to collapse
Then return it as faulty as it should load unless borked somehow.
/J
Yes i Will return it on monday unless someone knows a way to restore it.
It's possible to start it in 3 modes.
1. Hold down the volume buttons + camera + power button. It then sais cold boot and then nothing more.
2. Vol down + camera + power. Then it sais emergency download, and my computer finds it
3. Camera + power. Shows a phone, cord and computer.
I tried the lg phone support tool and it sais the phone already are up to date.
Isn't there a way to load the windows phone 7 software onto the phone somehow?
Would really like to do it so I won't have to return it. I bought it of eBay, it is a customer return, so guess the guy before me tried messing with it to update it. And the company that sold it to me did not check if it was functioning before selling it to me..
lamanfluff said:
Yes i Will return it on monday unless someone knows a way to restore it.
It's possible to start it in 3 modes.
1. Hold down the volume buttons + camera + power button. It then sais cold boot and then nothing more.
2. Vol down + camera + power. Then it sais emergency download, and my computer finds it
3. Camera + power. Shows a phone, cord and computer.
I tried the lg phone support tool and it sais the phone already are up to date.
Isn't there a way to load the windows phone 7 software onto the phone somehow?
Would really like to do it so I won't have to return it. I bought it of eBay, it is a customer return, so guess the guy before me tried messing with it to update it. And the company that sold it to me did not check if it was functioning before selling it to me..
Click to expand...
Click to collapse
You could of course flash the phone with new firmware and see if it fixes the problem, sounds like someone managed to mess up with your set.
There are some information around here how to flash the phone if you feel up for it.
/J
Ok but do u think The firmware is The problem? The LG tool showed that it was up to date, isn't it just the windows phone 7 software that is missing? I am not sure, but wouldn't the phone not show the lg logo if the firmware was bad?
A reward of € 10 will be given to the person helping me with this, and makes it work as supposed to.
lamanfluff said:
Ok but do u think The firmware is The problem? The LG tool showed that it was up to date, isn't it just the windows phone 7 software that is missing? I am not sure, but wouldn't the phone not show the lg logo if the firmware was bad?
A reward of € 10 will be given to the person helping me with this, and makes it work as supposed to.
Click to expand...
Click to collapse
You could probably try a different version of the OS depending on what you have now (I bet you wrote what version you had, I just missed it).
There are a few threads about that under the WP7 hack and dev. And as far as the firmware goes it's hard to know if it's actually ok just because it loads to the logo, I don't know where in the boot sequence the logo appears etc. there could be problems with the firmware too.
My first step would be to see if it's possible to get a new version of the OS in and if not, I'd try some new firmware.
And if nothing works return it as faulty.
/J
jontatas said:
You could probably try a different version of the OS depending on what you have now (I bet you wrote what version you had, I just missed it).
There are a few threads about that under the WP7 hack and dev. And as far as the firmware goes it's hard to know if it's actually ok just because it loads to the logo, I don't know where in the boot sequence the logo appears etc. there could be problems with the firmware too.
My first step would be to see if it's possible to get a new version of the OS in and if not, I'd try some new firmware.
And if nothing works return it as faulty.
/J
Click to expand...
Click to collapse
I dont know what version there is on my phone, it received it like this, the only thing I see when trying to start it is "LG" and it shows right away.
I tried everything I stumbled upon when it comes to trying to put windows phone software in the phone, but Nothing works... I will send it back tomorrow monday if I cant find a solution to this.
I got the same problem before.
I just turn it off, and leave it for a night
Next day, all the things are ok
yeeaah well, nothing helped, whatever I did to it...
I received no less than 3 broken phones and now finaly I have a working one yaaaayyy
Congrats,
I just sent my phone to LG for the same problem....
My phone can boot up in very low rate...
Lg optimus e900 start issue
Hi,
I have the same issue, I can't restart my phone.
I can see only the logo and the LG caption.
Pls help,
Laszlo
I've got almost the same problem
I just bought this phone via local site, several days ago i'm so much happy with its smoothness but 2 days ago this problem appear, i spent several hours just to find it hanging on LG logo, i've waited for hour to hour just to see nothing happened that time. I left it for bed, and the next day the phone back to normal. But then, at least the device hanging 3 times a day, its just restarting itself and it seems the phone is unable to boot itself to the homescreen. Need help! I've done many way, from restoring, cold boot, softreset, upgrade(when it comes normal) etc but all don't work till now.
Unfortunately, this product doesn't release officially in my country, so i guess i won't be able to get replacement unit. I became so desperate cause i often use it, i need to get this phone back to normal, soon! Thankyou and sorry for my bad english
Hey everyone,
First of all thank you for taking a look in my thread, this is my second post here in this forum but, I just have to tell you guys, I've been around since 2012 and you guys rock!
Anyway enough of chit chat, so I had my phone pretty much hard bricked, thanks to some tutorials I've finally found a way to get it back to life BUT ( there's always a but ), it isn't like before, everything was working very nicely after the fix, the Power button stopped working, the volume rockers are still fully functional but the power button isn't. So I thought "f*ck this, I gotta buy a new flex assembly", that's what I did, it arrived today, so I got to work and put it all together with the new button, but for my surprise it is EXACTLY de same as before, so it seems like it has nothing to do with the flex assembly/buttons itself but something more like motherboard or something..
Have any one of you guys had this issue? By the way another very interesting thing is that the buttton "still gives signal" since if I press on it, it doesn't do anything even with the phone off BUT, if I have the phone turned on, and I press it for 5+ seconds , it shutdowns the phone as it should! So why isn't it working when I do a press, but if I hold it works?
By the way my phone when died even the partition table got corrupted, so I even had to redo that could it have anything to do with it?
Oh and the basic tips of putting the phone in Download Mode and fully revert to stock didn't work, already did it many times since I brought it back to like..
Regards, and thank you for reading this LONG post and spending your time with me :silly:
Anyone got any clue please?..
SlashPT09 said:
Anyone got any clue please?..
Click to expand...
Click to collapse
Hi, i has been a long time until you wrote this topic, but now, in 2018, i got the same problem that you.
I bricked the phone, unbricked with some xda's tutorials, install a kdz image and system got ok, but the damn power button not work.
It work on a very specific moment that is when the phone is on and i press the button, after 5 seconds the phone turn off, but none menu appears, it just turn off. Besides, it won't work to turn on the device. In this case, i aways need to put the cable and when the LG log appears I must remove (if not, the battery symbol is shown, and the device not turn on).
I wonder if you were able to fix your phone or someone of xda had this problem.
Thanks
Nope never got it fixed just moved on and bought another device, besides that is now a outdated device..
Please if you can help me answer me, this is my only phone and I need asap.
I have Huawei nova 3i, the battery has been in a bad condition for more than 4 months, and each day I noticed it had less life and a hot phone each time I charge it, one day I left it to charge and I swear it was for less than an hour I found the logo in my face, and it was stuck, I went yesterday after trying every possible way for a week of pressing power + vol down and power + vol up ( the first one made the phone keep booting again and again with the logo,and the second one made it keep vibrate with a black screen)
I let the battery drain and came back to pressing but the only thing came was the red battery meaning no power and red led light, so I got back on charger and repeated the above and nothing new came to light.
I took it to a tec center and someone said it might be battery, unfortunately I changed it for a high price and it didn't work after the change, still the exect same, I went home tried to enter erecovery multiple times but I never can, and I plugged it in a PC then a screen came to light, with the android bot and words saying in green
FRP Lock
Phone is locked
I was SO happy when finally something appeared, but again nothing I can do I pressed up down power, nothing happened in this screen too.
Please if anyone know any ANY possible way to get it back without losing data or with losing data ( but I will be much more happy if I didn't lose data I have so many files I need) kindly please just tell me, I can do it the work on a PC too just tell me the program needed and I will look it up.
I will thank u forever.
I forgot to mention that at the tec center they told me that it will need a box flash, something like miracle box maybe?
And again today I went to other tec center and he said flashing it might actually not make it work,so I'm really scared of what to do now.
What's the actual problem? The system? OS? It needs a new emui update? What exactly is the problem Does anyone know what the problem is for it to never comeback to life? Could it be in need of inside cleaning? Ugh I'm so lost
anything please
you went to official huawei center? they will not help you
go to any other 3rd party service center, and they can flash it