Hey everyone,
First of all thank you for taking a look in my thread, this is my second post here in this forum but, I just have to tell you guys, I've been around since 2012 and you guys rock!
Anyway enough of chit chat, so I had my phone pretty much hard bricked, thanks to some tutorials I've finally found a way to get it back to life BUT ( there's always a but ), it isn't like before, everything was working very nicely after the fix, the Power button stopped working, the volume rockers are still fully functional but the power button isn't. So I thought "f*ck this, I gotta buy a new flex assembly", that's what I did, it arrived today, so I got to work and put it all together with the new button, but for my surprise it is EXACTLY de same as before, so it seems like it has nothing to do with the flex assembly/buttons itself but something more like motherboard or something..
Have any one of you guys had this issue? By the way another very interesting thing is that the buttton "still gives signal" since if I press on it, it doesn't do anything even with the phone off BUT, if I have the phone turned on, and I press it for 5+ seconds , it shutdowns the phone as it should! So why isn't it working when I do a press, but if I hold it works?
By the way my phone when died even the partition table got corrupted, so I even had to redo that could it have anything to do with it?
Oh and the basic tips of putting the phone in Download Mode and fully revert to stock didn't work, already did it many times since I brought it back to like..
Regards, and thank you for reading this LONG post and spending your time with me :silly:
Anyone got any clue please?..
SlashPT09 said:
Anyone got any clue please?..
Click to expand...
Click to collapse
Hi, i has been a long time until you wrote this topic, but now, in 2018, i got the same problem that you.
I bricked the phone, unbricked with some xda's tutorials, install a kdz image and system got ok, but the damn power button not work.
It work on a very specific moment that is when the phone is on and i press the button, after 5 seconds the phone turn off, but none menu appears, it just turn off. Besides, it won't work to turn on the device. In this case, i aways need to put the cable and when the LG log appears I must remove (if not, the battery symbol is shown, and the device not turn on).
I wonder if you were able to fix your phone or someone of xda had this problem.
Thanks
Nope never got it fixed just moved on and bought another device, besides that is now a outdated device..
Related
So the power button on my nexus one completely stopped working. I shut off the device and could not turn it back on. After popping battery in an out a few times I finally somehow, got it to turn on. Now i'm going to need to make sure it stays on all the time.
Now my question. To me this looks like a manufacturers hardware defect, so would the unlocked bootloader and me being the second owner of the device make any sort of difference here?
Any other way to turn the device on when its completely shut off?
Update #1: 7/30/10
Called HTC, then i got transferred to Nexus one department then back to HTC. Described my problem to everyone. They were nice to say they will get that taken care of. Told him i got the phone as a gift, updated my info, and I'm doing the swap option. He also said that any "physical" damage to the device might be charged, aka broken screen or w.e, regular wear and tear is fine. Mentioned nothing at all about software. I'm flashing back to stock either way. Will update as time goes
Same power button problem. Haven't checked into warranty with bootloader being unlocked, but if you plug up the usb cord, wait for the little led light to come on, take out the battery and put it back in as soon as the light goes off, then it will power the phone back on.
Ah i guess that's how i got lucky with turning it on then.
Hmm, i might give them a call tomorrow and see what they say.
Let us know what they say if you don't mind.
No worries with HTC. I was a second owner of my first N1. I traded my Iphone 3GS for it. Unlocked the bootloader first 10 minutes i had the thing. Few weeks later. I saw dust under the screen. Called up HTC. Gave them IMEI. Told them my girl got it for me for my birthday. They gave me an address.(original owners). I said nope and gave them mine. Went through the process. I had them put a hold on my credit card for $525. They sent a replacement phone next day. I packed mine up and sent it back. I had to do this twice because the replacement after 3 weeks started getting dust again and i could tell the power button wasnt really working well also.
Now im a second owner of another N1. I traded my tmobile N1 for a ATT N1. woot.
You can also root the phone and put trackball wake on it....also, when the phone is off completely, the trackball WILL boot it - tested this myself today.
MaximReapage said:
You can also root the phone and put trackball wake on it....also, when the phone is off completely, the trackball WILL boot it - tested this myself today.
Click to expand...
Click to collapse
Honestly when my phone was off I tried booting by pressing trackball and holding, just pressing and nothing. How did you do it? is there a specific process? I already have trackball wake selected thankfully before this even happened.
Another question is, how in the hell would i get into recovery or any of those functions now?
Coderedpl said:
Honestly when my phone was off I tried booting by pressing trackball and holding, just pressing and nothing. How did you do it? is there a specific process? I already have trackball wake selected thankfully before this even happened.
Another question is, how in the hell would i get into recovery or any of those functions now?
Click to expand...
Click to collapse
You download quick boot and user that to get into recovery or bootloader.
I ended up receiving the new nexus one, but i sold it already so yea
Hi,
I've a nexus one with a broken on-off button, so now I can't boot my phone at all.
there is a rom to boot with trackball or any hardware button ?
thx
Read the thread
thebluest said:
Hi,
I've a nexus one with a broken on-off button, so now I can't boot my phone at all.
there is a rom to boot with trackball or any hardware button ?
thx
Click to expand...
Click to collapse
Read the Thread and there is a suggestion on how to turn it on
Greeting
I ask someone for help. My Samsung E900 has worked perfectly until yesterday ... After changing the Regional Settings sought to be restarted to accept new settings. After that phone at the time of ignition appears LG logo and the fit is a few seconds the screen clears and the LG logo appears again, and so constantly ..
Any ideas?
Thanks
Update - Problem resolved
Hi
I resolved the problem ... means COOLD START is on the keys...
Hold down the VOLUME + - and the CAMERA button and turn the POWER button the phone ...
Phone back to factory settings
Samsung? LOL. And I think this will work even if you don't hold the camera button, but I must try it again...
LG
sorry LG not Samsung LOL
Reset want do the job
Any other ideas?
After a reset i have the same symptoms again.
thx anyway
That's weird!
solved?
did u solve the it?
i have the same problem, it freezes on the "LG" screen, nothing more happens....
i tried the cold boot thingy but then it just sais "cold boot" and then nothing happens...
any one knows if there is something that can be done to make it work?
lamanfluff said:
did u solve the it?
i have the same problem, it freezes on the "LG" screen, nothing more happens....
i tried the cold boot thingy but then it just sais "cold boot" and then nothing happens...
any one knows if there is something that can be done to make it work?
Click to expand...
Click to collapse
Pulling the battery for 10-30 secs and then boot seems to be the universal problem solver for WP7 phones.
/J
my phone was delivered without the battery inserted, it it was out for like a couple of days. Still gets stuck at the "LG" screen...
lamanfluff said:
my phone was delivered without the battery inserted, it it was out for like a couple of days. Still gets stuck at the "LG" screen...
Click to expand...
Click to collapse
Then return it as faulty as it should load unless borked somehow.
/J
Yes i Will return it on monday unless someone knows a way to restore it.
It's possible to start it in 3 modes.
1. Hold down the volume buttons + camera + power button. It then sais cold boot and then nothing more.
2. Vol down + camera + power. Then it sais emergency download, and my computer finds it
3. Camera + power. Shows a phone, cord and computer.
I tried the lg phone support tool and it sais the phone already are up to date.
Isn't there a way to load the windows phone 7 software onto the phone somehow?
Would really like to do it so I won't have to return it. I bought it of eBay, it is a customer return, so guess the guy before me tried messing with it to update it. And the company that sold it to me did not check if it was functioning before selling it to me..
lamanfluff said:
Yes i Will return it on monday unless someone knows a way to restore it.
It's possible to start it in 3 modes.
1. Hold down the volume buttons + camera + power button. It then sais cold boot and then nothing more.
2. Vol down + camera + power. Then it sais emergency download, and my computer finds it
3. Camera + power. Shows a phone, cord and computer.
I tried the lg phone support tool and it sais the phone already are up to date.
Isn't there a way to load the windows phone 7 software onto the phone somehow?
Would really like to do it so I won't have to return it. I bought it of eBay, it is a customer return, so guess the guy before me tried messing with it to update it. And the company that sold it to me did not check if it was functioning before selling it to me..
Click to expand...
Click to collapse
You could of course flash the phone with new firmware and see if it fixes the problem, sounds like someone managed to mess up with your set.
There are some information around here how to flash the phone if you feel up for it.
/J
Ok but do u think The firmware is The problem? The LG tool showed that it was up to date, isn't it just the windows phone 7 software that is missing? I am not sure, but wouldn't the phone not show the lg logo if the firmware was bad?
A reward of € 10 will be given to the person helping me with this, and makes it work as supposed to.
lamanfluff said:
Ok but do u think The firmware is The problem? The LG tool showed that it was up to date, isn't it just the windows phone 7 software that is missing? I am not sure, but wouldn't the phone not show the lg logo if the firmware was bad?
A reward of € 10 will be given to the person helping me with this, and makes it work as supposed to.
Click to expand...
Click to collapse
You could probably try a different version of the OS depending on what you have now (I bet you wrote what version you had, I just missed it).
There are a few threads about that under the WP7 hack and dev. And as far as the firmware goes it's hard to know if it's actually ok just because it loads to the logo, I don't know where in the boot sequence the logo appears etc. there could be problems with the firmware too.
My first step would be to see if it's possible to get a new version of the OS in and if not, I'd try some new firmware.
And if nothing works return it as faulty.
/J
jontatas said:
You could probably try a different version of the OS depending on what you have now (I bet you wrote what version you had, I just missed it).
There are a few threads about that under the WP7 hack and dev. And as far as the firmware goes it's hard to know if it's actually ok just because it loads to the logo, I don't know where in the boot sequence the logo appears etc. there could be problems with the firmware too.
My first step would be to see if it's possible to get a new version of the OS in and if not, I'd try some new firmware.
And if nothing works return it as faulty.
/J
Click to expand...
Click to collapse
I dont know what version there is on my phone, it received it like this, the only thing I see when trying to start it is "LG" and it shows right away.
I tried everything I stumbled upon when it comes to trying to put windows phone software in the phone, but Nothing works... I will send it back tomorrow monday if I cant find a solution to this.
I got the same problem before.
I just turn it off, and leave it for a night
Next day, all the things are ok
yeeaah well, nothing helped, whatever I did to it...
I received no less than 3 broken phones and now finaly I have a working one yaaaayyy
Congrats,
I just sent my phone to LG for the same problem....
My phone can boot up in very low rate...
Lg optimus e900 start issue
Hi,
I have the same issue, I can't restart my phone.
I can see only the logo and the LG caption.
Pls help,
Laszlo
I've got almost the same problem
I just bought this phone via local site, several days ago i'm so much happy with its smoothness but 2 days ago this problem appear, i spent several hours just to find it hanging on LG logo, i've waited for hour to hour just to see nothing happened that time. I left it for bed, and the next day the phone back to normal. But then, at least the device hanging 3 times a day, its just restarting itself and it seems the phone is unable to boot itself to the homescreen. Need help! I've done many way, from restoring, cold boot, softreset, upgrade(when it comes normal) etc but all don't work till now.
Unfortunately, this product doesn't release officially in my country, so i guess i won't be able to get replacement unit. I became so desperate cause i often use it, i need to get this phone back to normal, soon! Thankyou and sorry for my bad english
Guys, thanks to all of you - especially frysee, who was a big help via Gtalk - the biggest part of my problem is solved:
My Transformer is still bricked and display won't turn on, but I was able to go back to stock ROM and wipe all personal data. So I won't get any trouble with warranty
If anyone is interested, me or frysee could write a How To for returning to stock ROM and retrieve warranty when screen is dead.
Thanks again!
qwer23
_____________________________________
Hi Guys!
I have a problem that is pretty common over at MoDaCo, but I haven't read anything about it here.
My Transformer sometimes doesn't turn on or wake up from sleep mode when turned on already. You can push the power button endlessly and nothing happens. Then suddenly it'll turn on as if nothing had happened.
I had this problem the first time right out of the box, so there's no bad software installed by me, don't know what ASUS did though. Perhaps it's one of the pre-installed apps.
As I said, normally it eventually comes to life again, but now I couldn't turn it on for a whole day! After I had no success, I left it on the charger over night, but still nothing this morning.
I feel I tried everything, pushed Vol Down + Power to go into recovery, pushed Vol Up + Vol Down and plugged USB to go into (useless) flash mode just to see the device to something, but no.
The only things that happen, if I push power:
- if I plug USB, the Windows plug and play sound plays and if I force shutdown the Transformer again (long-press power), the unplug sound plays. The device even appears in the Explorer and I can access SD card, but it only shows empty folders, no files in them.
- When I force-shutdown the device, I hear an internal "click" sound, similar to the one when you switch from front to rear camera, and you hear the speakers turn off. So it seems to initialize everything and stuff...
But all the time the Transformer screen stays dead
Any advice? Really need your help here guys! At MoDaCo there's no answer so far...
Regards,
qwer23
I was initially having this problem with my Transformer (it would usually happen when it had gone on standby and it couldn't get it to turn back on again) until I ran the ASUS updates on it - have you been able to update your Transformer on the occasions it did turn on for you?
If you've rooted it and stopped the OTA updates going onto it, you might just have to undo that and get an official ASUS firmware build on there to help fix the problem.
demonotter said:
I was initially having this problem with my Transformer (it would usually happen when it had gone on standby and it couldn't get it to turn back on again) until I ran the ASUS updates on it - have you been able to update your Transformer on the occasions it did turn on for you?
If you've rooted it and stopped the OTA updates going onto it, you might just have to undo that and get an official ASUS firmware build on there to help fix the problem.
Click to expand...
Click to collapse
Hi!
First of all, thx for your answer.
Well as I said, the first time the problem occured, the device was out of the box and untouched before. So I don't think it has to do with something I did.
For me it normally also happened when device was in sleep mode, except the first time out of the box
I installed a custom ROM + Clockworkmod Recovery after that, hoping it'll fix the deep sleep problem. And it really didn't happen again - until now
I didn't turn off OTA updates as I first saw that thread when the device was already dead Perhaps it tried to OTA update itself but I guess I would have to confirm this manually right? And I didn't do that...
Reflashing another ROM or the stock ROM was my first idea, too. But hell, I can't even go to recovery! No matter what I do, press, plug or unplugg, the screen stays black!
Nice, another german Transformer
"playing the plug and play sound" means you propably have adb access? Tried getting a logcat?
frysee said:
Nice, another german Transformer
"playing the plug and play sound" means you propably have adb access? Tried getting a logcat?
Click to expand...
Click to collapse
yes, being unable to wait for the german release, i imported from uk
adb gives me "device not found". even though i'm not a total noob, i don't know what i have to change to make it work. any advice? sadly i'm working while my tf is charging @home so can't really try something. i only hope you guys have some ideas
Sent from my rooted X10i using awesome custom roms
qwer23 said:
Reflashing another ROM or the stock ROM was my first idea, too. But hell, I can't even go to recovery! No matter what I do, press, plug or unplugg, the screen stays black!
Click to expand...
Click to collapse
Ahh. I didn't realise the screen was completely dead, I thought you had it working some of the time as had happened to me.
If you're seeing it in Explorer, maybe it is just a hardware failure and you'll have to get Asus to look at it...
demonotter said:
Ahh. I didn't realise the screen was completely dead, I thought you had it working some of the time as had happened to me.
If you're seeing it in Explorer, maybe it is just a hardware failure and you'll have to get Asus to look at it...
Click to expand...
Click to collapse
no i guess that it is indeed the same thing that happened to you, sometimes it worked, sometimes not. only this time it doesn't come back from the not working part I guess you see yours in explorer too if it troubles to get out of deep sleep. i guess it's just the screen that sometimes doesn't turn on for all with that problem. but for me it doesn't even turn on for booting
Sent from my rooted X10i using awesome custom roms
It's possible. I don't think I tested connecting it to the Explorer while the screen was off, I assumed it just wasn't on.
Can you test it with the HDMI out and see if that shows you what would be on screen?
demonotter said:
It's possible. I don't think I tested connecting it to the Explorer while the screen was off, I assumed it just wasn't on.
Can you test it with the HDMI out and see if that shows you what would be on screen?
Click to expand...
Click to collapse
Yeah, good idea! Will try this asap when I'm back home. Do I have to press something on the TF to enable HDMI output or is it enough to plug it in?
qwer23 said:
Yeah, good idea! Will try this asap when I'm back home. Do I have to press something on the TF to enable HDMI output or is it enough to plug it in?
Click to expand...
Click to collapse
You just plug it in.
qwer23 said:
Hi Guys!
I have a problem that is pretty common over at MoDaCo, but I haven't read anything about it here.
My Transformer sometimes doesn't turn on or wake up from sleep mode when turned on already. You can push the power button endlessly and nothing happens. Then suddenly it'll turn on as if nothing had happened.
I had this problem the first time right out of the box, so there's no bad software installed by me, don't know what ASUS did though. Perhaps it's one of the pre-installed apps.
As I said, normally it eventually comes to life again, but now I couldn't turn it on for a whole day! After I had no success, I left it on the charger over night, but still nothing this morning.
I feel I tried everything, pushed Vol Down + Power to go into recovery, pushed Vol Up + Vol Down and plugged USB to go into (useless) flash mode just to see the device to something, but no.
The only things that happen, if I push power:
- if I plug USB, the Windows plug and play sound plays and if I force shutdown the Transformer again (long-press power), the unplug sound plays. The device even appears in the Explorer and I can access SD card, but it only shows empty folders, no files in them.
- When I force-shutdown the device, I hear an internal "click" sound, similar to the one when you switch from front to rear camera, and you hear the speakers turn off. So it seems to initialize everything and stuff...
But all the time the Transformer screen stays dead
Any advice? Really need your help here guys! At MoDaCo there's no answer so far...
Regards,
qwer23
Click to expand...
Click to collapse
When it seems dead, try holding the power button for about 5 seconds (or whatever time you hold it for when turning it off)
Leave for about 2 minutes then hold power button again (like you do when turning device on) and it should boot.
checkbox111 said:
When it seems dead, try holding the power button for about 5 seconds (or whatever time you hold it for when turning it off)
Leave for about 2 minutes then hold power button again (like you do when turning device on) and it should boot.
Click to expand...
Click to collapse
Tried that a lot of times already. No help.
Phone still won't turn on, but I just realized I cannot only access my SD Card, I can also access internal storage.
Is this of any help?
qwer23 said:
Tried that a lot of times already. No help.
Click to expand...
Click to collapse
Then your ****ed!
checkbox111 said:
Then your ****ed!
Click to expand...
Click to collapse
I guess so
I'm getting a mini-hdmi cable today to determine if the screen is broken, because i have the feeling that ***** is booting but not showing anything...But I'll have to send it to ASUS nonetheless. Has anyone ever sent a device in for warranty reasons with custom software (CWM, Custom ROM) on it? What kind of trouble will I have to face?
I'd say try it with the HDMI cable, see if you get anything up on it and if the touchscreen/everything else still works, see if you can get the latest official ROM on there, see if that fixes the problem.
If nothing else, you can then send it back with an official firmware on it.
Try holding the power button for 5-10 sec, then press power + volume down (might be volume up - try both) together for another 5-6 sec. You'll get to a reset screen where it asks you to confirm if you want to wipe everything. press volume down (I think!! - read the screen carefully) instead to boot normally.
hope this helps
Its 10+ seconds for a full power off by the way, nothing shorter than that. If you changed any system files either by flashing or by pushing via ADB then you will have invalidated your warranty. Unless you can restore it to the way it was before you fiddled with it, you'll have an expensive paperweight.
sbirsen said:
Try holding the power button for 5-10 sec, then press power + volume down (might be volume up - try both) together for another 5-6 sec. You'll get to a reset screen where it asks you to confirm if you want to wipe everything. press volume down (I think!! - read the screen carefully) instead to boot normally.
hope this helps
Click to expand...
Click to collapse
Not possible since I installed CMW.
stuntdouble said:
Its 10+ seconds for a full power off by the way, nothing shorter than that. If you changed any system files either by flashing or by pushing via ADB then you will have invalidated your warranty. Unless you can restore it to the way it was before you fiddled with it, you'll have an expensive paperweight.
Click to expand...
Click to collapse
Big bummer And sadly there are no "ASUS Stores" around where I could use a stupid employee who has no clue and is convinced it's hardware related.
Well I don't have my HDMI cable by now and will try this first, but if that doesn't work:
Can someone give me a step-by-step how I can access the restore function of CWM without seeing anything on my device? I did a backup in CWM before installing the custom ROM. Perhaps tell me sth. like this: "press power+vol. down on start, then after approx. x seconds press vol up, wait a bit to make sure CWM started, press vol down twice, to go to recovery, ..."
And can someone do the same for the stock recovery to reset the device? Perhaps there's a chance that a failed OTA update deleted CWM an there's the stock recovery.
I know the chance to save it like this are small, but otherwise a lot of money is lost
Regards,
qwer23
On the flip side however, you could probably make some money by being the first to dismantle your device, and sell the photos of the internals to some website like iFixit. Then you could also sell it off as parts on eBay. Obviously it might take more effort than you are willing to give it, but at least it's another option.
If you do decide to open it up I would love to hear what mA rating the battery has on its label. Not being able to find out the actual proper rating from any site has been driving me nuts. I believe it's 6800mA but im not 100% sure.
Hi all,
I have been coming to this forum for a while now but since I lost my login data I had to re-register and now can't post in the developers section.
My i9505 has one of the latest CM11 nightlies on it, and it worked fine apart from the device switching of for no appearent reason when in its holster (might have been unintentional pushing of buttons, I don't know) and sometimes not booting properly. Usually after some "convincing" by pushing the on button again it would start up eventually.
Today, it switched off again and now seems completely dead. No reaction what so ever when pushing/holding the "on" button, or the recovery or download button combo. When attaching the charger no animation is shown and the device seems to get pretty hot pretty fast.
Does anyone have an idea on what might be wrong, and is there anything I can still try to revive it, or should I just send it in for repairs? If it is dead no one can see there is a custom rom on it, right? So it should be covered by warranty...
Thanks upfront for any help!
Bommeldinges said:
Hi all,
I have been coming to this forum for a while now but since I lost my login data I had to re-register and now can't post in the developers section.
My i9505 has one of the latest CM11 nightlies on it, and it worked fine apart from the device switching of for no appearent reason when in its holster (might have been unintentional pushing of buttons, I don't know) and sometimes not booting properly. Usually after some "convincing" by pushing the on button again it would start up eventually.
Today, it switched off again and now seems completely dead. No reaction what so ever when pushing/holding the "on" button, or the recovery or download button combo. When attaching the charger no animation is shown and the device seems to get pretty hot pretty fast.
Does anyone have an idea on what might be wrong, and is there anything I can still try to revive it, or should I just send it in for repairs? If it is dead no one can see there is a custom rom on it, right? So it should be covered by warranty...
Thanks upfront for any help!
Click to expand...
Click to collapse
As u said if your device "gets pretty hot in a very short time" maybe its a hardware problem(wrong chip)... Maybe some high voltage or someting...
Try a new battery, if that does not work, its dead I think..
Hi guys,
I have a problem with my LG. Yesterday i was casually lurkin some internet or whatever. Havent done anything suspicious or something. Then i switched phone off and put it for a while on the side. When I tried to unlock it after that it was impossible. Phone just doesnt respond. I havent rooted it or done anything connected with roms etc, not into this stuff really. When i plug it into charger red LED starts blinking, then LG logo appears, then battery icon and after that its just charging like normally and still red LED lights. Right now its fully charged so instead of red, the LED is green. The buttons combinations dont work neither (hold power,hold power and vol-) besides holding vol+ and power. I have to hold it for a while, then plug into charger and then some kinda download menu appears, but it does nothing too. Still cant start the phone. However few hours ago i just tried holding power for a bit and everything worked perfectly. Then i locked the screen and *bam* bricked again. I know there are many topics like that but i havent found the exact same problem with solution yet. Every help would be highly appreciated. :good::good:
BUMP please any advice. It actually Turner on one more time, but when i tried using power button, at first it didnt respond, then after few seconds it went bricked back. I managed to take off the backcover so maybe there is sth i can do?
I could be wrong but sounds more software related then hardware to me, maybe try to use one of that flash tools or pc suite to do a clean flash and sadly lose all your data.
If that doesn't help idk....
You don't have a backup do you?
No, unfortunately i dont. I didnt expect that to happen.
Yo so I actually managed to turn it on (i ve no idea how) and its working fine. Im scared to press the power button so it will be unlocked all the time. Ive already done the general backup of photos, music etc, but if there is some good app to make solid backup or something please let me know.
Soo is there any other option to find out if it is finally repaired than pressing power button? I can access data on PC so maybe theres the way to fix it now? If i press the button probably it will brick again, and then after couple of days it will suddenly start working, so id rather dont do this..