Database Users

[Q] Need PIT file for Galaxy S4 I9505

Hi Everyone
I've bricked my S4 stupidly by trying to install CF Auto Root without having USB Debugging enabled.
No my phone starts up telling me there was an incomplete upgrade and to continue it but kies can't seem to find anything.
I've tried reflashing the stock firmware but I keep receiving a error saying it can't find the PIT file for mapping.
Does anyone have one for the S4 I9505 INTL (UK) Variant.
Thanks

sandeepsb said:
Hi Everyone
I've bricked my S4 stupidly by trying to install CF Auto Root without having USB Debugging enabled.
No my phone starts up telling me there was an incomplete upgrade and to continue it but kies can't seem to find anything.
I've tried reflashing the stock firmware but I keep receiving a error saying it can't find the PIT file for mapping.
Does anyone have one for the S4 I9505 INTL (UK) Variant.
Thanks
Click to expand...
Click to collapse
usb debugging
see my signature for flashing with pit :good:

samersh72 said:
usb debugging
see my signature for flashing with pit :good:
Click to expand...
Click to collapse
I've just downloaded your pit file. The problem here is I can't get back into my phone and I can only go into download mode. Initially I set USB Debugging as off and tried flashing. So now I'm stuck with a bricked phone.

sandeepsb said:
I've just downloaded your pit file. The problem here is I can't get back into my phone and I can only go into download mode. Initially I set USB Debugging as off and tried flashing. So now I'm stuck with a bricked phone.
Click to expand...
Click to collapse
NO need to enable usb debugging to flash with odin, just put pit file and the firmware in odin and flash

sandeepsb said:
I've just downloaded your pit file. The problem here is I can't get back into my phone and I can only go into download mode. Initially I set USB Debugging as off and tried flashing. So now I'm stuck with a bricked phone.
Click to expand...
Click to collapse
Do not start panicking so soon all this happens while we tinker with device follow what samersh72 saying u ll have ur device working
Its not bricked at all
Sent from my GT-I9500 using xda premium

samersh72 said:
usb debugging
see my signature for flashing with pit :good:
Click to expand...
Click to collapse
samersh72 said:
NO need to enable usb debugging to flash with odin, just put pit file and the firmware in odin and flash
Click to expand...
Click to collapse
I've tried it and I'm getting a Failed message:
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9505XXUAMDM_I9505OXXAMDB_I9505XXUAMDM_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
<ID:0/003> There is no PIT partition.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/003> Added!!
I've attached a screenshot.

sandeepsb said:
I've tried it and I'm getting a Failed message:
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9505XXUAMDM_I9505OXXAMDB_I9505XXUAMDM_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
<ID:0/003> There is no PIT partition.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/003> Added!!
I've attached a screenshot.
Click to expand...
Click to collapse
Just tried again and I'm receiving this:
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9505XXUAMDM_I9505OXXAMDB_I9505XXUAMDM_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)

sandeepsb said:
Just tried again and I'm receiving this:
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9505XXUAMDM_I9505OXXAMDB_I9505XXUAMDM_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
Try using ODIN 3.07 version
also make sure u have no kies programme running , try using diff usb port
it should work

sandeepsb said:
I've tried it and I'm getting a Failed message:
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9505XXUAMDM_I9505OXXAMDB_I9505XXUAMDM_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
<ID:0/003> There is no PIT partition.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/003> Added!!
I've attached a screenshot.
Click to expand...
Click to collapse
remove pit file from folder and put it on desktop and the firmware and odin
use odin 3.07 or 1.85
change usb port and use original cable
if you can go in recovery (i doubt)make a wipe)
retry

samersh72 said:
remove pit file from folder and put it on desktop and the firmware and odin
use odin 3.07 or 1.85
change usb port and use original cable
if you can go in recovery (i doubt)make a wipe)
retry
Click to expand...
Click to collapse
Crisis averted just flashed the PIT without anything in the PDA section and I've managed to boot back into my phone.
Thanks for the help and the PIT file.

sandeepsb said:
Crisis averted just flashed the PIT without anything in the PDA section and I've managed to boot back into my phone.
Thanks for the help and the PIT file.
Click to expand...
Click to collapse
glad to hear that, but usually it is flashed with the firmware if you would try again you will succeed......any way you make it :good:

Same happened with me, no matter how many times I tried flashing the PIT with the firmware, it just wouldn't have it at all.
When I flashed the PIT on it's own, it flashed fine, said reset, then booted back into android.
Glad you got it sorted though! It's scary when you see FAIL in big letters when flashing stuff! haha.

Read more, Learn more.....
---------- Post added at 07:45 PM ---------- Previous post was at 07:35 PM ----------
but in some cases where there is a serious firmware issue, pit file will work only with flashing firmware

Please help, I need the PIT file for M919 (T-mobile), anyone have it? Pleaseeeeee.

T-Mo GS4 Pit File
xs2k said:
Please help, I need the PIT file for M919 (T-mobile), anyone have it? Pleaseeeeee.
Click to expand...
Click to collapse
I too Also need this file as well, I can only seem to find the international GS4 pit files.

samersh72 said:
NO need to enable usb debugging to flash with odin, just put pit file and the firmware in odin and flash
Click to expand...
Click to collapse
samersh72 said:
remove pit file from folder and put it on desktop and the firmware and odin
use odin 3.07 or 1.85
change usb port and use original cable
if you can go in recovery (i doubt)make a wipe)
retry
Click to expand...
Click to collapse
I cant find the PIT partition file anywhere on your sig
I dunno if im looking in the wrong place. Can you give me a hint on where it is?
Im having problems with my phone and it wont load past the boot animation.
Chris

scientificharmony said:
I cant find the PIT partition file anywhere on your sig
I dunno if im looking in the wrong place. Can you give me a hint on where it is?
Im having problems with my phone and it wont load past the boot animation.
Chris
Click to expand...
Click to collapse
Attached here in first post http://forum.xda-developers.com/showthread.php?t=2265477
Sent from my Galaxy

samersh72 said:
Attached here in first post http://forum.xda-developers.com/showthread.php?t=2265477
Sent from my Galaxy
Click to expand...
Click to collapse
Hi, Thanks for that info. The device has now boot, but i seem to have error messages in recovery cannot mount E:\ etc etc
how the hell do i fix that lol

scientificharmony said:
Hi, Thanks for that info. The device has now boot, but i seem to have error messages in recovery cannot mount E:\ etc etc
how the hell do i fix that lol
Click to expand...
Click to collapse
reflash with i9505-cwm-recovery-6.0.3.2-4
wipe all
reflash with pit CSB_signed_Fusion3_EUR_0325_V2 and pda I9505XXUAME2_I9505OLBAMDM_I9505DXUAME2_HOME.tar

Just a word from me guys.
Please don't underestimate power of changing USB port and/or USB cable. I've just been sitting on soft-bricked s4, nothing seemed to work, ODIN 3.x or 1.8, original firmware or third party ROM/recovery etc, PIT file, nothing could be overwritten. I restarted PC and instal/reinstall drivers.. nothing.
I've changed the cable and USB port to the rear one et voila, all worked as a charm.
good luck.

Firmware upgrade encountered an issue.

So my gs4 seems to be soft bricked. I was trying to reroot my phone and it failed in the middle of rooting and now when I try to turn it on, it goes to a screen saying firmware upgrade encountered an issue. Please select recovery mode in Kies & try again. What do I do? Do I just flash stock firmware onto the phone with odin?

xTrooge said:
So my gs4 seems to be soft bricked. I was trying to reroot my phone and it failed in the middle of rooting and now when I try to turn it on, it goes to a screen saying firmware upgrade encountered an issue. Please select recovery mode in Kies & try again. What do I do? Do I just flash stock firmware onto the phone with odin?
Click to expand...
Click to collapse
yes your best option

Blackwolf10 said:
yes your best option
Click to expand...
Click to collapse
any links to a fast download? found one but it goes 360 kb/s max.

xTrooge said:
any links to a fast download? found one but it goes 360 kb/s max.
Click to expand...
Click to collapse
good you can think of your options while it is downloading :laugh:
no sorry i am not that familiar with this thread but on stock firmware threads usually people leave mirrors of other sites so try that

So just tried it, heres what i get from odin
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> SPH-L720_MDC_Stock_Nodata.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> There is no PIT partition.
<OSM> All threads completed. (succeed 0 / failed 1)
fml

xTrooge said:
So just tried it, heres what i get from odin
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> SPH-L720_MDC_Stock_Nodata.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> There is no PIT partition.
<OSM> All threads completed. (succeed 0 / failed 1)
fml
Click to expand...
Click to collapse
ahhhh seems your rooting has made a few problems you don't have a pit partition so odin can't do anything about it
you can try kies don't know if it will help seems you will have to service it i guess

Blackwolf10 said:
ahhhh seems your rooting has made a few problems you don't have a pit partition so odin can't do anything about it
you can try kies don't know if it will help seems you will have to service it i guess
Click to expand...
Click to collapse
where do i get the pit? kies is pretty useless seeing as how it can only recover if i backed it up

xTrooge said:
where do i get the pit? kies is pretty useless seeing as how it can only recover if i backed it up
Click to expand...
Click to collapse
pit file usually comes with the stock Rom you get 3 files from the zip right ?
but i wouldn't want to try that and i would defently read a thread about pit before doing anything
BTW what's your device model ?
the only thing i can think of is you used a wrong rooting methood for it

Blackwolf10 said:
pit file usually comes with the stock Rom you get 3 files from the zip right ?
but i wouldn't want to try that and i would defently read a thread about pit before doing anything
BTW what's your device model ?
the only thing i can think of is you used a wrong rooting methood for it
Click to expand...
Click to collapse
nvm just fixed it. i just had to use a different usb port and restart my comp.

xTrooge said:
nvm just fixed it. i just had to use a different usb port and restart my comp.
Click to expand...
Click to collapse
hah that works the best glad you didn't have to use Pit

[Q] Unroot problem: Odin FAIL

Apologies if this has been asked before, but I tried checking everywhere for a solution and couldn't come up with anything.
I have an AT&T Galaxy S4 I337. I rooted it, but now I want to unroot it. I used Odin 3v185 and this is what I get:
Screenshot: i.imgur.com/XRBVjH6.jpg
The white box on the bottom left says:
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I337UCUAMDL_I337ATTAMDL_I337UCUAMDL_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> aboot.mbn
<ID:0/005> NAND Write Start!!
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
My phone says:
START [224, 1440]
SW REV. CHECK FAIL : fused : 2 , Binary : 1
I've tried it multiple time with the I337UCUAMDB_I337ATTAMDB_I337UCUAMDB_HOME.tar.md5 and I337UCUAMDL_I337ATTAMDL_I337UCUAMDL_HOME.tar.md5 firmware. I am using the original Samsung USB cord. I've also tried it only 3 different USB ports on my computer. I am running XP. Can anyone help me?

Your on the mf3 firmware. Odin won't work. I can tell because of the "fused 2" in the Odin printout

Thanks. Is there a way to unroot it?

tcow24 said:
Thanks. Is there a way to unroot it?
Click to expand...
Click to collapse
Can you boot now? If you can unroot in super su.

tcow24 said:
Thanks. Is there a way to unroot it?
Click to expand...
Click to collapse
Yes there is, I'm guessing you are able to boot to your phone?
Here's a link and instructions you can follow. Good luck and report to us how it goes
http://forum.xda-developers.com/showthread.php?p=45340743#post45340743

It worked! Thanks JD and haremmon. I feel like an idiot for not seeing that thread.

I need some help please?
I have a Galaxy s4 rooted and I wipe the system and rebooted... I was installing a rom and did not even think anout restoring my old ones. so know I am stuck and the phone will not go into twrp, all it dose is beeps evey 3 seconds. I can get to odin download and i have downloaded stock fimware md5 files and only had one not fail on me using odin3. but it dose the same thing beeps and still can not get to recovery.. please help this is frustrating.

markdthor28 said:
I have a Galaxy s4 rooted and I wipe the system and rebooted... I was installing a rom and did not even think anout restoring my old ones. so know I am stuck and the phone will not go into twrp, all it dose is beeps evey 3 seconds. I can get to odin download and i have downloaded stock fimware md5 files and only had one not fail on me using odin3. but it dose the same thing beeps and still can not get to recovery.. please help this is frustrating.
Click to expand...
Click to collapse
pull battery,
put battery back in,
boot into odin using the physical keys (home+volume down+power),
then when it says press volume up to boot into odin, or volume down for cancel choose volume down.
Might boot up normally, i have the issue to where to recovery is messed up, all i need is the 'install-recovery.sh' but no one who has a rooted S4 running MF3 has responded to me yet..ill let you know if i fix the recovery that way.

h11wiscan said:
pull battery,
put battery back in,
boot into odin using the physical keys (home+volume down+power),
then when it says press volume up to boot into odin, or volume down for cancel choose volume down.
Might boot up normally, i have the issue to where to recovery is messed up, all i need is the 'install-recovery.sh' but no one who has a rooted S4 running MF3 has responded to me yet..ill let you know if i fix the recovery that way.
Click to expand...
Click to collapse
At this point, I don't know if you'd be able to fix it that way. The only option that many users have been doing is going to best buy with a Samsung experience area and having them reflash the MF3 firmware.
Sent from my SAMSUNG-SGH-I337 using xda app-developers app

tcow24 said:
Apologies if this has been asked before, but I tried checking everywhere for a solution and couldn't come up with anything.
I have an AT&T Galaxy S4 I337. I rooted it, but now I want to unroot it. I used Odin 3v185 and this is what I get:
Screenshot: i.imgur.com/XRBVjH6.jpg
The white box on the bottom left says:
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I337UCUAMDL_I337ATTAMDL_I337UCUAMDL_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> aboot.mbn
<ID:0/005> NAND Write Start!!
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
My phone says:
START [224, 1440]
SW REV. CHECK FAIL : fused : 2 , Binary : 1
I've tried it multiple time with the I337UCUAMDB_I337ATTAMDB_I337UCUAMDB_HOME.tar.md5 and I337UCUAMDL_I337ATTAMDL_I337UCUAMDL_HOME.tar.md5 firmware. I am using the original Samsung USB cord. I've also tried it only 3 different USB ports on my computer. I am running XP. Can anyone help me?
Click to expand...
Click to collapse
Mine is same issue, except my phone says: Unsupport dev_type, I am using samsung galaxy s3 I9300 with binary count 2.
Please help me to resolve this and unroot my device.

srikanthkata said:
Mine is same issue, except my phone says: Unsupport dev_type, I am using samsung galaxy s3 I9300 with binary count 2.
Please help me to resolve this and unroot my device.
Click to expand...
Click to collapse
Not trying to be rude but please go post this question under the GS3 forum. The GS3 forum can be found here http://forum.xda-developers.com/galaxy-s3

[Q] At&t samsung galaxy s4 i337 not booting into os

Hello there! I recently had purchased a Samsung Galaxy s4. I did not really enjoy touchwiz. I really wanted Google Play Edition. Anyways, my phone is stuck in ODIN mode with a message saying "Downloading... Do not turn off target!" I know that you can enter download mode and hit cancel to boot. But, my issue is different. Listen. I got safestrap on my s4, and it worked perfectly. I backed up my phone and installed Google Play Edition on the STOCK slot. Turned out, Google Play Edition would not boot up so I went back into safestrap and added a new rom slot. Then I restored my firmware on that slot. I left the stock slot not working... Then I uninstalled safestrap at boot up, not thinking about the stock rom. THIS IS THE BIG MISTAKE. I then rebooted my phone, and I get odin with the error message. I can't get into recovery settings or safestrap of course. I am now stuck with no options on my phone. I try to go to download mode and hit cancel. This did not boot up my phone, only my Google Play Edition which was not working. Now I can't change my rom slot. All I want to do now is go back to touchwiz. I want to restore my phone, but how? I would really appreciate your help!
I was running android 4.3 jellybean on MF3 so I can't load TWRP.

AlwaysBeen said:
Hello there! I recently had purchased a Samsung Galaxy s4. I did not really enjoy touchwiz. I really wanted Google Play Edition. Anyways, my phone is stuck in ODIN mode with a message saying "Downloading... Do not turn off target!" I know that you can enter download mode and hit cancel to boot. But, my issue is different. Listen. I got safestrap on my s4, and it worked perfectly. I backed up my phone and installed Google Play Edition on the STOCK slot. Turned out, Google Play Edition would not boot up so I went back into safestrap and added a new rom slot. Then I restored my firmware on that slot. I left the stock slot not working... Then I uninstalled safestrap at boot up, not thinking about the stock rom. THIS IS THE BIG MISTAKE. I then rebooted my phone, and I get odin with the error message. I can't get into recovery settings or safestrap of course. I am now stuck with no options on my phone. I try to go to download mode and hit cancel. This did not boot up my phone, only my Google Play Edition which was not working. Now I can't change my rom slot. All I want to do now is go back to touchwiz. I want to restore my phone, but how? I would really appreciate your help!
I was running android 4.3 jellybean on MF3 so I can't load TWRP.
Click to expand...
Click to collapse
Download mf3 tar file http://forum.xda-developers.com/showthread.php?t=2504311
Run in odin, your phone should be back up and running.
Sent from my SAMSUNG-SGH-I337 using xda app-developers app

[email protected] said:
Download mf3 tar file http://forum.xda-developers.com/showthread.php?t=2504311
Run in odin, your phone should be back up and running.
Sent from my SAMSUNG-SGH-I337 using xda app-developers app
Click to expand...
Click to collapse
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> BOOTLOADER_I337UCUAMF3_812098_REV06_user_low_ship_MULTI_CERT.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> MODEM_I337UCUAMF3_812098_REV06_user_low_ship_MULTI_CERT.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CSC_ATT_I337ATTAMF3_812098_REV06_user_low_ship_MULTI_CERT.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> PLATFORM_I337UCUAMF3_812098_REV06_user_low_ship_MULTI_CERT.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> sbl1.mbn
<ID:0/003> NAND Write Start!!
<ID:0/003> sbl2.mbn
<ID:0/003> sbl3.mbn
<ID:0/003> rpm.mbn
<ID:0/003> aboot.mbn
<ID:0/003> FAIL! (Auth)
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I dont know why it is failing

AlwaysBeen said:
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> BOOTLOADER_I337UCUAMF3_812098_REV06_user_low_ship_MULTI_CERT.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> MODEM_I337UCUAMF3_812098_REV06_user_low_ship_MULTI_CERT.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CSC_ATT_I337ATTAMF3_812098_REV06_user_low_ship_MULTI_CERT.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> PLATFORM_I337UCUAMF3_812098_REV06_user_low_ship_MULTI_CERT.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> sbl1.mbn
<ID:0/003> NAND Write Start!!
<ID:0/003> sbl2.mbn
<ID:0/003> sbl3.mbn
<ID:0/003> rpm.mbn
<ID:0/003> aboot.mbn
<ID:0/003> FAIL! (Auth)
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I dont know why it is failing
Click to expand...
Click to collapse
I think you've got an incomplete flash somewhere. I don't know if this will work but try the mf3 emergency files then flash the tar file again. http://forum.xda-developers.com/showthread.php?t=2526964
Sent from my SAMSUNG-SGH-I337 using xda app-developers app

[email protected] said:
I think you've got an incomplete flash somewhere. I don't know if this will work but try the mf3 emergency files then flash the tar file again. http://forum.xda-developers.com/showthread.php?t=2526964
Sent from my SAMSUNG-SGH-I337 using xda app-developers app
Click to expand...
Click to collapse
Which file do I exactly download from this link?

AlwaysBeen said:
Which file do I exactly download from this link?
Click to expand...
Click to collapse
You need SGS-I337_16GB.pit. Run this in Odin and it will fix your issue.
And yes I registered just to answer your question.
http://forum.xda-developers.com/showthread.php?t=2404970

bobbigbuns said:
You need SGS-I337_16GB.pit. Run this in Odin and it will fix your issue.
And yes I registered just to answer your question.
http://forum.xda-developers.com/showthread.php?t=2404970
Click to expand...
Click to collapse
I really appreciate the registering just to help me out! Do i load the pit file with the MF3 tars? Or before?

bobbigbuns said:
You need SGS-I337_16GB.pit. Run this in Odin and it will fix your issue.
And yes I registered just to answer your question.
http://forum.xda-developers.com/showthread.php?t=2404970
Click to expand...
Click to collapse
<ID:0/003> Removed!!
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> FAIL!
<ID:0/003>
<ID:0/003> Re-Partition operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
It failed =( What can I do? My phone is showing in red text: SECURE CHECK FAIL : PIT
MY BOOTLOADER IS LOCKED, IT SAYS MY WRITE PROTECTION IS ENABLED

AlwaysBeen said:
<ID:0/003> Removed!!
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> FAIL!
<ID:0/003>
<ID:0/003> Re-Partition operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
It failed =( What can I do? My phone is showing in red text: SECURE CHECK FAIL : PIT
MY BOOTLOADER IS LOCKED, IT SAYS MY WRITE PROTECTION IS ENABLED
Click to expand...
Click to collapse
Do you remember what bootloader you were on?
If you were on anything higher than MF3 you are wasting your time, as you cannot downgrade this far.
MK2 and up requires those specific Odin tars. Since the original post was in January I will assume you were on MK2 at that time.
See here: http://forum.xda-developers.com/showthread.php?t=2663545
Personally, I would just go with the NB1, since root is now out for us. Once you odin the NB1 file, grab the files needed to towelroot, root, install superuser.apk, install safestrap 3.72 and you will probably be back in business
Now... thus all said, I am having a nightmare myself... last night I was listening to music on my I337 NC1 stockly rooted, when all of a sudden it froze... so I pulled the battery (which was fully charged), put it back in, and now my phone won't power up.
Being the geek I am, I grabbed my original samsung udb cable and plugged it into my windows machine... lo-and-behold windows recognized it, but as a completely different device... Qualcom USB or something...
How can I get back to download mode? Or do I need a JTAG? :crying:

kevp75 said:
Do you remember what bootloader you were on?
If you were on anything higher than MF3 you are wasting your time, as you cannot downgrade this far.
MK2 and up requires those specific Odin tars. Since the original post was in January I will assume you were on MK2 at that time.
See here: http://forum.xda-developers.com/showthread.php?t=2663545
Personally, I would just go with the NB1, since root is now out for us. Once you odin the NB1 file, grab the files needed to towelroot, root, install superuser.apk, install safestrap 3.72 and you will probably be back in business
Now... thus all said, I am having a nightmare myself... last night I was listening to music on my I337 NC1 stockly rooted, when all of a sudden it froze... so I pulled the battery (which was fully charged), put it back in, and now my phone won't power up.
Being the geek I am, I grabbed my original samsung udb cable and plugged it into my windows machine... lo-and-behold windows recognized it, but as a completely different device... Qualcom USB or something...
How can I get back to download mode? Or do I need a JTAG? :crying:
Click to expand...
Click to collapse
Sorry to hear about your dilemma. I probably cant help, but why not try.
Question, what do you mean by stockly rooted NC1? Are using the NC1 stock rom but rooted, or are you using another rom? Did you root using the download method or the towel root? Just curious.
I take you have tried to get to download mode using these steps?
Power off the phone completely by removing its battery for 5 seconds.
Re-insert the battery back into its place.
Press and hold Volume Down, Home and Power buttons, all at the same time.
Release the buttons only when the ‘Warning!!’ message appears.
Next, press Volume Up button to confirm that you wish to enter Download Mode.
Your device will now show a green Android with the ‘Downloading… Do not turn off target’ text listed under it.

MatthewPresley said:
Sorry to hear about your dilemma. I probably cant help, but why not try.
Question, what do you mean by stockly rooted NC1? Are using the NC1 stock rom but rooted, or are you using another rom? Did you root using the download method or the towel root? Just curious.
I take you have tried to get to download mode using these steps?
Power off the phone completely by removing its battery for 5 seconds.
Re-insert the battery back into its place.
Press and hold Volume Down, Home and Power buttons, all at the same time.
Release the buttons only when the ‘Warning!!’ message appears.
Next, press Volume Up button to confirm that you wish to enter Download Mode.
Your device will now show a green Android with the ‘Downloading… Do not turn off target’ text listed under it.
Click to expand...
Click to collapse
yeah... tried all that.
Stock Rooted NC1 ROM
Sent from my A110 using Tapatalk

Not sure if I need new firmware or, maybe just a new ROM can fix the problem

I bought an S6 Edge+ for $100, could not pass up such a good deal.
The bad part is that it was from Sprint.
I assumed that the phone was simply "locked" to Sprint but, had ALL the internals to work with any carrier. It was unlocked by Sprint and after two weeks of waiting, I was finally able to use it with my carrier (Cricket/AT&T) My issues are that I can't seem to get LTE going. If I run it in LTE/CDMA mode I get fast data but, no calls. If I run in GSM/UMTS I get very slow 3G data and can still make/receive calls. Is there no way to get a LTE/GSM option up and running on this phone? I tried Sammobile, which I don't recommend, because everything on the internet seemed to say their site could fix the issue. After I PAID for a membership, every post I seemed to read said that it was impossible. I even tried to reach out to their community for help but, that post still has not made it on the boards. is there really nothing I can do?

kdgaydos said:
I bought an S6 Edge+ for $100, could not pass up such a good deal.
The bad part is that it was from Sprint.
I assumed that the phone was simply "locked" to Sprint but, had ALL the internals to work with any carrier. It was unlocked by Sprint and after two weeks of waiting, I was finally able to use it with my carrier (Cricket/AT&T) My issues are that I can't seem to get LTE going. If I run it in LTE/CDMA mode I get fast data but, no calls. If I run in GSM/UMTS I get very slow 3G data and can still make/receive calls. Is there no way to get a LTE/GSM option up and running on this phone? I tried Sammobile, which I don't recommend, because everything on the internet seemed to say their site could fix the issue. After I PAID for a membership, every post I seemed to read said that it was impossible. I even tried to reach out to their community for help but, that post still has not made it on the boards. is there really nothing I can do?
Click to expand...
Click to collapse
First try flashing new firmware.

El Solido said:
First try flashing new firmware.
Click to expand...
Click to collapse
I'm in a similar situation to the OP, do you have more details? Like where to get the firmware, step by step methods, etc?
Thanks for helping a few people out El Solido!

So yeah, I pretty much have read on Sammobile that the only Firmware I can flash, is the version specifically for my phone. I can't seem to find any U.S. cariers, they seem to cater to overseas models mostly. If you could elaborate more with the "how" and "where" part of flashing new firmware, that would help immensely.

kdgaydos said:
So yeah, I pretty much have read on Sammobile that the only Firmware I can flash, is the version specifically for my phone. I can't seem to find any U.S. cariers, they seem to cater to overseas models mostly. If you could elaborate more with the "how" and "where" part of flashing new firmware, that would help immensely.
Click to expand...
Click to collapse
Since every version of S6E+ have same hardware, you can flash whatever rom you want and since you are on AT&T, you can try flashing at&t firmware. I checked it is not available for download at sammobile, but don't worry i will send you firmware file for it.
---------- Post added at 01:37 PM ---------- Previous post was at 01:33 PM ----------
kdgaydos said:
So yeah, I pretty much have read on Sammobile that the only Firmware I can flash, is the version specifically for my phone. I can't seem to find any U.S. cariers, they seem to cater to overseas models mostly. If you could elaborate more with the "how" and "where" part of flashing new firmware, that would help immensely.
Click to expand...
Click to collapse
https://forum.xda-developers.com/at.../nougat-odin-files-g928a-g928at4eqc6-t3596180
here is complete firmware file for that phone
---------- Post added at 01:38 PM ---------- Previous post was at 01:37 PM ----------
charter3554 said:
I'm in a similar situation to the OP, do you have more details? Like where to get the firmware, step by step methods, etc?
Thanks for helping a few people out El Solido!
Click to expand...
Click to collapse
See post above.

Will this firmware come with all the AT&T bloatware? Will my phone still be unlocked? I'm using the phone with Cricket Mobile but, they rent on AT&T towers. I'm definitely going to try and flash the phone this weekend. Does anyone know if the "original" unlocked Samsung Firmware is available anywhere?

Download link is down. I contacted the uploader to see if he could fix. We'll see. . .

kdgaydos said:
Download link is down. I contacted the uploader to see if he could fix. We'll see. . .
Click to expand...
Click to collapse
Let us know! Thanks

Downloaded the files and extracted, loaded ODIN but, every attempt so far has failed.
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin engine v(ID:3.1210)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/003> Removed!!
<ID:0/004> Added!!
<ID:0/004> Odin engine v(ID:3.1210)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Set PIT file..
<ID:0/004> DO NOT TURN OFF TARGET!!
<ID:0/004> FAIL!
<ID:0/004>
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:-8872519/000> Odin engine v(ID:3.1210)..
<ID:0/004> Odin engine v(ID:3.1210)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:-8872519/000> send REBOOT_ODIN command (COM:4)
<ID:0/004> Can't open the serial(COM) port.
<OSM> All threads completed. (succeed 0 / failed 1)
Phone reads: SECURE CHECK FAIL : (PIT)
I've never had this much trouble before. I even tried three different versions of ODIN, all with NO results

kdgaydos said:
Downloaded the files and extracted, loaded ODIN but, every attempt so far has failed.
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin engine v(ID:3.1210)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/003> Removed!!
<ID:0/004> Added!!
<ID:0/004> Odin engine v(ID:3.1210)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Set PIT file..
<ID:0/004> DO NOT TURN OFF TARGET!!
<ID:0/004> FAIL!
<ID:0/004>
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:-8872519/000> Odin engine v(ID:3.1210)..
<ID:0/004> Odin engine v(ID:3.1210)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:-8872519/000> send REBOOT_ODIN command (COM:4)
<ID:0/004> Can't open the serial(COM) port.
<OSM> All threads completed. (succeed 0 / failed 1)
Phone reads: SECURE CHECK FAIL : (PIT)
I've never had this much trouble before. I even tried three different versions of ODIN, all with NO results
Click to expand...
Click to collapse
First of all don't use .pit file, second can you send me screenshot of firmware files ?

I'm not actually using the PIT option. That is just part of the log errors. I've enclosed pictures to try and shed more light on what I'm doing. You'll notice I don't even have the re-partition option checked but, it shows up in log error again. I repeated these steps with ALL three different versions of ODIN. Someone suggested I try an ADB sideload of a different update but, I never cared for ADB and I'm not even sure that would help since phone is still currently Sprint software.

kdgaydos said:
I'm not actually using the PIT option. That is just part of the log errors. I've enclosed pictures to try and shed more light on what I'm doing. You'll notice I don't even have the re-partition option checked but, it shows up in log error again. I repeated these steps with ALL three different versions of ODIN. Someone suggested I try an ADB sideload of a different update but, I never cared for ADB and I'm not even sure that would help since phone is still currently Sprint software.
Click to expand...
Click to collapse
Since thats the problem, I suggest install TWRP and try some custom rom for your phone, most of them have all csc modes.

El Solido said:
Since thats the problem, I suggest install TWRP and try some custom rom for your phone, most of them have all csc modes.
Click to expand...
Click to collapse
Hi, I just thanked you, that's a lot of good info there but quick question does the Verizon version have root available from what I've seen there is no root available for the Verizon version G928V.
The only reason I'm thinking of rooting or flashing or anything is because I want to be able to free up the bands that the Verizon version has locked out, as we know the S6 Edge Plus has all of the available van bands for T-Mobile AT&T and Verizon but certain versions have certain bands switched off. Also I want to be able to Wi-Fi hotspot tether without carrier provisioning checks..