Greetings! After receiving this OTA update the second sim slot doesn't recognize the nano sim. I tried factory reset and hard reset but nothing happened. In the settings tje option is available but the second card doesn't show. After rebooting many times I saw ar the boot screen top left for some seconds it was showing operator two times. But after it loads a password for one operator. Please somebody help.
theo888 said:
Greetings! After receiving this OTA update the second sim slot doesn't recognize the nano sim. I tried factory reset and hard reset but nothing happened. In the settings tje option is available but the second card doesn't show. After rebooting many times I saw ar the boot screen top left for some seconds it was showing operator two times. But after it loads a password for one operator. Please somebody help.
Click to expand...
Click to collapse
Try to update to b608
Thank you. I am still rookie to this things so if you could provide me more info how am I supposed to update it to b608 it would be great.
theo888 said:
Thank you. I am still rookie to this things so if you could provide me more info how am I supposed to update it to b608 it would be great.
Click to expand...
Click to collapse
Your should get OTA updates. Simply download OTAs and install.. Or you could also manually download b608 and upgrade your mobile..
Upgrading via Manual Way:
Download the firmware
Extract the zipped file where you should get update.app file (may be inside some folders)
Then copy the update.app file in a folder named dload and copy the dload folder into the root of you're memory card
Open your dialer and dial the following: *#*#2846579#*#*
Then a Menu will appear and them choose SDCard Upgrade.
That's it
Because I am not sure where to pur rhem,I created 2 folders,one in external sd and one in internal. Both named DLOAD and inside i've put unzipped updaten
Tried to update with with both ways. It's failed
There are 2 b608, one is patch and the other is full ROM.
Download and open the zip, if you see folders and one say patch is the wrong one, if only have the update.app is the right one.
Rhe easy way is:
Create a dload folder in microSD ( don't use caps, DLOAD doesn't work, must be dload)
Copy to inside the update.app file
Turn off the phone amd press the volume keys and power, all the 3 keys at same time and release when phone boots.
Flash will start.
.
Thank you! It finally worked.
Related
I downloaded the Dextermod 1.2 without issue to my sd card, but applying mod didn't not show android market but did erase any apps loaded from appoke market. So I found and tried to download 1.3, but it does not ask to change file name and then says download unsuccessful in the notifications bar. Tap it and get popup, "Cannot download. The content is not supported on this phone." So I try the 1.2 mod again and get the same message. Anyone else with this problem or can help me with a fix?
Downoad it on a computer and put it on your sd, android webkit browser doesnt like zip files.
Rename it Update.zip before running.
Looks like your new like me. I downloaded to sd card. (make sure card is clean. I had a problem with that first-no windows files) Also I downloaded file from my pc to the card in a dongle Then transfered card to the A7. went to file manager. found the file on the card (elocitymodv13) under sdcard\sdcard-disk0 and then press on it until menu came up and hit rename and then renamed it update.zip. finally go through the routine of powering off A7, then hit power key for 2 seconds, let off, and then hit power button again until message comes on screen about entering recovery mode.
Then use the menu key on side of screen to enter recovery menu once the android image shows up. you then need to use search key and back key on side of screen to move up and down the menu. First move highlight down to "Wipe/factory reset" and hit menu button to apply command. (Dexter recommends wiping the slate clean to ensure proper function of his mod.) When that is done, you will see the menu again and move down to "apply sdcard:update.zip" and hit menu buttom to apply command. this will then put the new mod. on the system. The only other thing that will be neccessary is to go back and download the "ElocityMod v1.3 bluetooth fix" http://forum.xda-developers.com/showthread.php?t=890042 . This update gets applied the same way as above except you dont obviously need to use the wipe/factory reset command again. This will give you bluetooth function back. I hope this is clear enough.
I have been trying since I got the thing to tether it to my windows mobile phone. Good luck with that. I still haven't found an answer. take care.
file name
as stated
download the file to your computer. then rename it to update. Just
update
You don't need to put .zip at end because its already a zip file. Then transfer it on to your sd card. Easiest way is to open your My computer drag and drop to the dir that is sd card on your computer that way it automatically goes into the root of the sd card.
then do the as stated flash update procedure.
t_sandat8 said:
as stated
download the file to your computer. then rename it to update. Just
update
You don't need to put .zip at end because its already a zip file. Then transfer it on to your sd card. Easiest way is to open your My computer drag and drop to the dir that is sd card on your computer that way it automatically goes into the root of the sd card.
then do the as stated flash update procedure.
Click to expand...
Click to collapse
Jesus, this just doesn't stop.
The file NEEDS TO BE Update.zip
Please read the writeup I just made this morning describing why people are getting screwed up on this, how to fix it, and why I rag on people like you who put out misinformation.
http://forum.xda-developers.com/showthread.php?p=11745552#post11745552
Hi, I know that to take off the custom roms, you need to flash the stock rom but how do you remove android, clockwork mod, and magldr off the phone? my phone has been acting up and i need to send it back through the hd2 insurance but i need to reset everything first. Thank you!
i need help how i can restore all settings plz help me
Download the spesific rom for your device from the HTC website. Eg if you are on the HD2 o2, you would download that rom. It comes as an .exe file.
Right click on the file and extract the contents to someware on your desktop, look for the .nbh file. Cant quite remember the name but it will be the biggest file. Rename it to leoimg.nbh and copy it on to your SD card.
Make sure it is the correct rom for your phone or it wont work.
Once you have done this reboot the phone and hold the volume down button at the same time to get into the boot loader. It will then prompt you to install the rom. This will remove everything and restore back to factory default for you and reinstate your warrenty!
Next time you shoud use the search button. If you had did this you had found this thread about it http://forum.xda-developers.com/showthread.php?t=1066852&highlight=restore+factory
Good luck!
mattijs86 said:
Next time you shoud use the search button. If you had did this you had found this thread about it http://forum.xda-developers.com/showthread.php?t=1066852&highlight=restore+factory
Good luck!
Click to expand...
Click to collapse
sorry, i tried using the search button but it kept coming across as "search capacity overloaded" or something like that. Next time i'll be more patient.
sorry for double post but i tried renaming the .nbh file to LEOIMG.nbh and when i go into the bootloader, nothing prompts up asking me to install the new rom. Help please?
okay, i went into the bootloader, put in the usb, and tried to press the .exe file but it won't let me press next.. someone PLEASE help
kjeong3514 said:
okay, i went into the bootloader, put in the usb, and tried to press the .exe file but it won't let me press next.. someone PLEASE help
Click to expand...
Click to collapse
In order to continue proper drivers must be installed. Check if when connecting usb there is on screen "USB". However if you install the exe file your SPL will not be restored to original.
If you want to return it to factory you need to do it via SD card. Or by exe but you then have to install SPL manually.
Try again, rename the largest nbh file to leoimg.nbh put it to sdcard root and reboot to bootloader.
Bootloader is the one with 4 different colors. To boot powerup phone and hold Volume Down key.
zach.antre said:
In order to continue proper drivers must be installed. Check if when connecting usb there is on screen "USB". However if you install the exe file your SPL will not be restored to original.
If you want to return it to factory you need to do it via SD card. Or by exe but you then have to install SPL manually.
Try again, rename the largest nbh file to leoimg.nbh put it to sdcard root and reboot to bootloader.
Bootloader is the one with 4 different colors. To boot powerup phone and hold Volume Down key.
Click to expand...
Click to collapse
There is "USB" on the screen and I believe i have the proper divers installed.
I downloaded the 3.14 t-mobile official rom and renamed the largest file (.nbh) to leoimg.nbh (and i tried LEOIMG.nbh, if it makes a difference for the CAPS) but nothing appeared on the bootloader screen. I tried to install the rom by the .exe file because i would rather get the official rom on so i can remove hspl manually but the "Next" button is grayed out. It won't let me go onto the next step. :/
What size sd card did you use? It usually wont work on a card bigger than four gigabytes. Try it on a class two, four gigabyte or less micro sd card.
Sent from my HTC HD2 using XDA App
i tried using a smaller sd card (4 gigabytes) and had no luck. the "next" button is still voided out..
kjeong3514 said:
There is "USB" on the screen and I believe i have the proper divers installed.
I downloaded the 3.14 t-mobile official rom and renamed the largest file (.nbh) to leoimg.nbh (and i tried LEOIMG.nbh, if it makes a difference for the CAPS) but nothing appeared on the bootloader screen. I tried to install the rom by the .exe file because i would rather get the official rom on so i can remove hspl manually but the "Next" button is grayed out. It won't let me go onto the next step. :/
Click to expand...
Click to collapse
If you're trying to Install windows back onto phone from original T-Mobile download don't modify there's original files...you don't have to change any files.once u see USB on the screen of you're phone u just run the windows mobile Install as usuall...
Sent from my Nexus One
bigfdaddy said:
If you're trying to Install windows back onto phone from original T-Mobile download don't modify there's original files...you don't have to change any files.once u see USB on the screen of you're phone u just run the windows mobile Install as usuall...
Sent from my Nexus One
Click to expand...
Click to collapse
even if i don't modify the files, the "next" button is grayed out (can't move on to the next step). It doesn't really make sense and i'm kind of stuck now.
Guys I am desparate, I mean I tryed all steps for everything I did STEP by STEP! After reading them many times, and also reading the comments and anyways after a research!
I tryed to do it slowly and carefully!
And now my phone is bricked as hell with a blue screen at startup, not allowing me to do ANYTHING
please help asap!
Everything happened after I managed to root my phone, with 2.3.5 official ROM!
sounds like you have corrupted/wiped some of the internal partitions. Have you made linux backup? It would save you at the moment.
Sent from my U8800 using xda premium
You could ask for someones linux backup and try to restore it in your phone. Also have you formatted something from mounts/storage?
I have done the steps you describe many times without any problems, so you have done too little or too much. Maby you flashed corrupted recovery in .cust_backup?
Sent from my U8800 using xda premium
Yes its propably about the recovery, that was actually what I did before the blue screen!
I aint have linux back up :/
How can I find? And if I do find, how do i use it?
i have the same problem, when i trying to istall ICS aurora. Help me
Not everything is lost.
I also did a stupid thing and deleted the partitions via CWM. Afterwards I saw the blue screen of death..
The phone came alive using this link
http://forum.xda-developers.com/showthread.php?t=1369296
I knew that the pink screen was not there but when I tried the above process without the battery my phone begun the upgrade and everything came back to normal
If it wont start the upgrade try to do the following.
Take out the sd card and put the battery back inside.
Then connect the phone with a usb and wait to see the battery charging icon.
Afterwards disconnect the usb, take out the battery, put the sd card back in, connect the usb and try again to flash the dload folder using the two volume + power buttons.
That's how i did it
Thankyou, that worked like a charm for me
Pink screen and dload
I have a problem.
I have placed new folder "dload" on the root directory (the one with pink screen ), but I forgot to place anything inside that folder. So now when I reboot the phone it tries to update firmware but it can't because there isn't anything inside the "dload" folder. It says Update failed. Now I just need to access to this folder again to put something in but I can't. I need this pink screen back. Please help.
Thanks
acoboy23 said:
I have a problem.
I have placed new folder "dload" on the root directory (the one with pink screen ), but I forgot to place anything inside that folder. So now when I reboot the phone it tries to update firmware but it can't because there isn't anything inside the "dload" folder. It says Update failed. Now I just need to access to this folder again to put something in but I can't. I need this pink screen back. Please help.
Thanks
Click to expand...
Click to collapse
This problem you describe is not that big.
All you need is to put your sd card to another phone and copy the necessary files from there.
rafamolina said:
i have the same problem, when i trying to istall ICS aurora. Help me
Click to expand...
Click to collapse
try to wipe all n flash rom again..! if unsuccessful, might rom that you download is corrupt
---------- Post added at 01:30 PM ---------- Previous post was at 01:24 PM ----------
acoboy23 said:
I have a problem.
I have placed new folder "dload" on the root directory (the one with pink screen ), but I forgot to place anything inside that folder. So now when I reboot the phone it tries to update firmware but it can't because there isn't anything inside the "dload" folder. It says Update failed. Now I just need to access to this folder again to put something in but I can't. I need this pink screen back. Please help.
Thanks
Click to expand...
Click to collapse
where you put dload folder? in external or internal memory? and from what you update the firmware ? sorry my bad english
What is a dload folder
acoboy23 said:
I have a problem.
I have placed new folder "dload" on the root directory (the one with pink screen ), but I forgot to place anything inside that folder. So now when I reboot the phone it tries to update firmware but it can't because there isn't anything inside the "dload" folder. It says Update failed. Now I just need to access to this folder again to put something in but I can't. I need this pink screen back. Please help.
Thanks
Click to expand...
Click to collapse
my phone is stuck on the blue screen after i erased a file through ram expander. I dont know what is a dload folder. and where to put it
Thanks to ionioni my yoga 2 1050 has been rescued, but just a small problem now after first boot as instructed I go into contacts and enter ####59930# and it shows country unknown, then enter ####6020# to set the code and on screen it says ERROR : could not read factory ota patch from sd card,or the patch is not correct.
I know not setting the country code prevents me from taking updates, is there a way around this as in put the file on the sd card for the tablet to read.
corasman said:
Thanks to ionioni my yoga 2 1050 has been rescued, but just a small problem now after first boot as instructed I go into contacts and enter ####59930# and it shows country unknown, then enter ####6020# to set the code and on screen it says ERROR : could not read factory ota patch from sd card,or the patch is not correct.
I know not setting the country code prevents me from taking updates, is there a way around this as in put the file on the sd card for the tablet to read.
Click to expand...
Click to collapse
take the easyimage.zip from the extracted rom folder and copy it on the sdcard (on the root of it not in some folder) then try again.
ionioni said:
take the easyimage.zip from the extracted rom folder and copy it on the sdcard (on the root of it not in some folder) then try again.
Click to expand...
Click to collapse
Thanks yet again ionioni, worked perfect.
corasman said:
Thanks yet again ionioni, worked perfect.
Click to expand...
Click to collapse
you can delete the easyimage.zip from sdcard if you configured your code (it is only needed one time for a few files in the zip that are used when configuring)
Hi,
I got the same problem, my version is YT2_830LC_USR_S000133_1501151106_WW21_ROW. Is there anyone got the easyimage.zip of this version? I tried YT2_830LC_USR_S000120 but failed.
I solved the problem using another way:
1. Flash the tablet using Lenovo's stock firmware (USR_S000050).
2. On the first boot, set country code.
Hey everyone,
I'm trying to comply update to my device using the B32 firmware downloaded on ZTE USA Support site. The file is large, too large for FAT32, at 5.39GB.
I have tried copying it using android transfer on my mac, ejecting the microSD and using a regular SD adapter and copying it that way, and I have also tried just downloading right from the Software Update screen. The first two methods errored with (https://ibb.co/kjh4yG).
The software update fails with a message explaining that the firmware found and downloaded by the phone does not match the device...?
I have been on the old firmware for what feels like a year now. I'm hoping you all can shed some light on this.
Thanks
macboss said:
Hey everyone,
I'm trying to comply update to my device using the B32 firmware downloaded on ZTE USA Support site. The file is large, too large for FAT32, at 5.39GB.
I have tried copying it using android transfer on my mac, ejecting the microSD and using a regular SD adapter and copying it that way, and I have also tried just downloading right from the Software Update screen. The first two methods errored with (https://ibb.co/kjh4yG).
The software update fails with a message explaining that the firmware found and downloaded by the phone does not match the device...?
I have been on the old firmware for what feels like a year now. I'm hoping you all can shed some light on this.
Thanks
Click to expand...
Click to collapse
You have two ways to do this:
-If your internet is decent enough just forget about the SD card and download the update on your phone. Afterwards, download 'RAR' from the play store, find the downloaded file (in Downloads), and open the zip file. If you find a PDF and a file called 'update.zip' inside, simply select it and unzip it to the root of your sd card (put '/storage/emulated/0/ on the Destination path). So you will have an 'update.zip' file there. You don't need to unzip this one. Now go to Settings, Updates, then let it scan and it should find the file, update and voila
-Format your SD Card to exfat and pop the file right in
It's weird that the update file is that huge, since usually files for the A2017G are around 2.1 gigs
It worked my friend!!!
I installed RAR, then went inside the downloaded file, found update.zip and unzipped it to '/storage/emulated/0. Did not find any PDF file though, not sure what that would have been for..? Anyway, saw the MiFavor firmware update screen which meant we were on our way to finish line. After that it booted to a small tiny linux penguin symbol and black background. Tried rebooting by holding down the power button. Rebooted. Saw penguin again for like 5 seconds, then booted straight to the axon wavy weird startup sequence. I DID IT!! I really appreciate the help on this one. Great idea. And it worked flawlessly.
Thank you. Choose an username.. Your username might be strange but your solutions are a lifesaver.
Cheers!
macboss said:
It worked my friend!!!
I installed RAR, then went inside the downloaded file, found update.zip and unzipped it to '/storage/emulated/0. Did not find any PDF file though, not sure what that would have been for..? Anyway, saw the MiFavor firmware update screen which meant we were on our way to finish line. After that it booted to a small tiny linux penguin symbol and black background. Tried rebooting by holding down the power button. Rebooted. Saw penguin again for like 5 seconds, then booted straight to the axon wavy weird startup sequence. I DID IT!! I really appreciate the help on this one. Great idea. And it worked flawlessly.
Thank you. Choose an username.. Your username might be strange but your solutions are a lifesaver.
Cheers!
Click to expand...
Click to collapse
Lol. The signup dialog said 'Choose an username...', so i said, why not?
I think you downloaded directly the update.zip. Maybe the RAR part wasn't needed, I dunno. If there's a folder somewhere there called 'update' then just delete it, and the update.zip too
A larger than 5Gb update would have to be the file fully unzipped into a folder structure.
Update files are zipped and that's what the phone wants.
Choose an username... said:
Lol. The signup dialog said 'Choose an username...', so i said, why not?
I think you downloaded directly the update.zip. Maybe the RAR part wasn't needed, I dunno. If there's a folder somewhere there called 'update' then just delete it, and the update.zip too
Click to expand...
Click to collapse
I downloaded one of the two raw zips from the ZTE USA site that had a very long name.zip with all numbers. The "update.zip" was nestled inside after unzipping the file on the phone. I just picked that file and moved it to ther root and applied the update. It went through successfully. Did i not apply it correctly? Should i have just renamed that whole file to "update.zip" and moved the entire folder? A little confused. But i imagine if the update took and i saw the 32 in the current build of the device it took. But im not sure.
macboss said:
I downloaded one of the two raw zips from the ZTE USA site that had a very long name.zip with all numbers. The "update.zip" was nestled inside after unzipping the file on the phone. I just picked that file and moved it to ther root and applied the update. It went through successfully. Did i not apply it correctly? Should i have just renamed that whole file to "update.zip" and moved the entire folder? A little confused. But i imagine if the update took and i saw the 32 in the current build of the device it took. But im not sure.
Click to expand...
Click to collapse
Nah that's okay. I thought you downloaded the 'update.zip' directly. Happens sometimes
It’s weird the update was only about 2 GB. What do you think was the rest of the file?
Maybe in case it needed the full firmware. In this case it didn’t probably. Just a guess
macboss said:
Maybe in case it needed the full firmware. In this case it didn’t probably. Just a guess
Click to expand...
Click to collapse
No, that doesn't make sense. No idea really.
It couldn't have gone wrong so don't stress out. Your phone works. If it didn't work then yeah, something was wrong...