Database Users

SGS II Camera Protection?

I had my first hairline scratch for SGS2 within 4 days of usage. Probably the Oleophobic coating it had which is more prone than Gorilla Glass.
I hurried to get a Screen protector but what about the camera?
Nobody in the forum seemed to be concerned about giving the 8MP's a decent protection.
Anyone here use a old SP on the lens or leave it as it is?
For a scratch-phobia user like me, probably not leaving chances to luck.

mystril said:
I had my first hairline scratch for SGS2 within 4 days of usage. Probably the Oleophobic coating it had which is more prone than Gorilla Glass.
It is Gorilla Glass
I hurried to get a Screen protector but what about the camera?
make one out of a screen protector .
jje
Click to expand...
Click to collapse

I stick a smiley sticker on the back under the camera so it doesn't touch the surface when I leave it on the table.
Or you may trying cutting a piece from a screnprotector...

mystril said:
I had my first hairline scratch for SGS2 within 4 days of usage. Probably the Oleophobic coating it had which is more prone than Gorilla Glass.
I hurried to get a Screen protector but what about the camera?
Nobody in the forum seemed to be concerned about giving the 8MP's a decent protection.
Anyone here use a old SP on the lens or leave it as it is?
For a scratch-phobia user like me, probably not leaving chances to luck.
Click to expand...
Click to collapse
Once I fixed a piece of a screen protector (which corresponded to area of the home button) on the camera's glass but it made my pictures terrible, specially because I covered the flash also. then I removed it. However it was one of the cheapest screen protector. A crystal clear one might be a different story.

mystril said:
I had my first hairline scratch for SGS2 within 4 days of usage. Probably the Oleophobic coating it had which is more prone than Gorilla Glass.
I hurried to get a Screen protector but what about the camera?
Nobody in the forum seemed to be concerned about giving the 8MP's a decent protection.
Anyone here use a old SP on the lens or leave it as it is?
For a scratch-phobia user like me, probably not leaving chances to luck.
Click to expand...
Click to collapse
I'm using martin shields screen protector, it comes with the protector for camera lens as well.
Sent from my GT-I9100 using XDA Premium App

I use two magnets and a washer for protecting it.... here is a video showing it with my old Galaxy S battery cover....
http://www.youtube.com/watch?v=Z-8P-xy32Tg&hd=1

Isn't compass showing towards your camera all the time?

I bought the SGP Ultra Capsule case for SGS2. It makes the phone about 1-2 mm thicker so when you put the phone on a flat surface the camera stays intact. Same goes for the screen. I've never used or even liked phone cases before but this case is awesome, my friends didn't even notice my phone had a case It also comes with a Crystal Clear screen protector so you can cut it to make a piece for your camera.
Oh and about the screen. The SGS2 screen is made of Gorilla Glass and has oleophobic coating. Oleophobic coating is not a glass type but coating, something that is added on top of the glass. And that coating doesn't scratch so you can't say that SGS2 is more prone to scratches due to the coating.

StupidIdea said:
Isn't compass showing towards your camera all the time?
Click to expand...
Click to collapse
Yes, the compass is the only disadvantage... But I dont use it, I prefer protecting the camera...

Jiia said:
I bought the SGP Ultra Capsule case for SGS2. It makes the phone about 1-2 mm thicker so when you put the phone on a flat surface the camera stays intact. Same goes for the screen. I've never used or even liked phone cases before but this case is awesome, my friends didn't even notice my phone had a case It also comes with a Crystal Clear screen protector so you can cut it to make a piece for your camera.
Oh and about the screen. The SGS2 screen is made of Gorilla Glass and has oleophobic coating. Oleophobic coating is not a glass type but coating, something that is added on top of the glass. And that coating doesn't scratch so you can't say that SGS2 is more prone to scratches due to the coating.
Click to expand...
Click to collapse
Yeap you're right. It should be the scratch-resistant (not proof) gorilla glass. I must make it clear that the scratch is a negligible hairline that only shows when screen's off.
I probably get a cheap crystal protector for the camera. Can't risk getting the goodness scratched =[

kirdroid said:
I'm using martin shields screen protector, it comes with the protector for camera lens as well.
Sent from my GT-I9100 using XDA Premium App
Click to expand...
Click to collapse
How is the screen protector like? I purchased a Matte Screen Protector and hell it makes my Super Amoled screen like rainbow glitter all over my screen. Especially the whites.
Worst money spent on a SP.

enough with cheap screen protector.
Try brando ultraclear and you won't regret it (brando don't pay me).
jokes aside, i had a pleomax screen protector with anti fingerprint treatment that work but the colors were bad. With the brando now i have the fingerprint but the colors are perfect and it's like there is not protector on the screen.
10+

sar3vok said:
enough with cheap screen protector.
Try brando ultraclear and you won't regret it (brando don't pay me).
jokes aside, i had a pleomax screen protector with anti fingerprint treatment that work but the colors were bad. With the brando now i have the fingerprint but the colors are perfect and it's like there is not protector on the screen.
10+
Click to expand...
Click to collapse
thanks man!
right now there're a few major downsides to SP for SGS2
Anti Fingerprint SP
+No Smudges
- Rainbow speckled display can drive some people mad when the purpose of SGS2 is it's beautiful AMOLED display. I mean, whats the point? Lol.
Crystal Clear SP
+Almost Naked SP
- Smudges.
Note: I am not too sure the extent of smudges on SP affecting user experiences.
But in short, with respect to thread's subject, I find many people have really unique ways to Sealing their SGS2 from wear and tear and by far the Magnet cover is the most creative and unique.
Solutions to SP for Camera
1) Get Martin Field's SP. They come with Camera SP. But they're only ones to do so.
2) Get a cheap crystal SP
3) Use a expensive SP just for the Camera SP.
Afterthoughts
I can't seem to abandon the thought of leaving the camera's glass Naked. I feel so uneasy when I lay it on the table, not knowing when some loose staplers or sand strikes/scratches.
Meanwhile I leave it to my case' thickness to safeguard my camera's glass for the time being...

[Q] Screen protector to cover the WHOLE surface?

Hey guys, so I just got my membrane screen protectors for the nexus 4, installation was pretty quick and bubble-less. I noticed tho, not all of the surface is covered.. just the screen. The edges and the other parts of the frontal glass are not covered and therefore scratch-exposed. I googled a bit and found out there probably is no screenprotector which allows FULL cover of the surface.
Can you guys confirm? I think these Membrane protectors I got are just bad.. crazy cheap price for 6 protectors. They are crystal clear tho.

Bytecode said:
Hey guys, so I just got my membrane screen protectors for the nexus 4, installation was pretty quick and bubble-less. I noticed tho, not all of the surface is covered.. just the screen. The edges and the other parts of the frontal glass are not covered and therefore scratch-exposed. I googled a bit and found out there probably is no screenprotector which allows FULL cover of the surface.
Can you guys confirm? I think these Membrane protectors I got are just bad.. crazy cheap price for 6 protectors. They are crystal clear tho.
Click to expand...
Click to collapse
It has a slight curve at the edges which doesn't allow for complete adhesion, and at the top for the camera and prox sensors need to be open...so someone decided.

mrhiab said:
It has a slight curve at the edges which doesn't allow for complete adhesion, and at the top for the camera and prox sensors need to be open...so someone decided.
Click to expand...
Click to collapse
Thanks man. So which protector covers more?

I always have taken my phones to Ghost Armor, they cover everything for $40. They'll replace all of it for $10. It's almost rubber feeling but it's crystal clear.

ZULU2189 said:
I always have taken my phones to Ghost Armor, they cover everything for $40. They'll replace all of it for $10. It's almost rubber feeling but it's crystal clear.
Click to expand...
Click to collapse
$40? That's a lot for a screen protector. I'll just stick to Membrane protectors
To anyone having tried both Membrane screen protectors and Mediadevil protectors, which one is the best? My membrane protectors get veeeery dirty with fingerprints and crap, and cleaning up is not that easy. Crystal clear tho.

The screen protectors have to expose a few essential parts like the the front camera and proximity sensors etc. I don't see what the problem is as just about all of them cover a large percentage, unless you want to paint the phone in wood gloss.
You can use Skinomi wet screen protector and it seems to have a larger surface area and curves around the side edges of the phone. But that expose the screen protector to cases, when you put a case on, the case edges will dig into the screen protectors and lift it up. Skinomi is pretty good with resisting fingerprints and smudges for me.
I'm currently using the "iloome tempered glass" and the only thing it exposes are the front sensors.

eksasol said:
The screen protectors have to expose a few essential parts like the the front camera and proximity sensors etc. I don't see what the problem is as just about all of them cover a large percentage, unless you want to paint the phone in wood gloss.
You can use Skinomi wet screen protector and it seems to have a larger surface area and curves around the side edges of the phone. But that expose the screen protector to cases, when you put a case on, the case edges will dig into the screen protectors and lift it up. Skinomi is pretty good with resisting fingerprints and smudges for me.
I'm currently using the "iloome tempered glass" and the only thing it exposes are the front sensors.
Click to expand...
Click to collapse
Ordered a couple Mediadevil today from Amazon, in a week or so I'll get them. Don't mind if it doesn't cover the entire surface (btw I knew FFC and proximity sensors don't have to be covered).

LeEco Pro 3, anyone using it withou ANY screen protector?

The stock screen protector is rubbing off so I replaced it with a new one.
https://www.amazon.com/gp/product/B01N3ZTMLG/ref=od_aui_detailpages00?ie=UTF8&psc=1
Unlike the stock one, this one is the hard glass. (the stock one is a film).
The problem with this screen protector is that it is a grease/finger print magnet. Ususally I can remove the grease/finger print from the screen by rubbing it on my shirt. With this one, it just moves the finger print grease around. No my shirt is not greasy because I tried it on another phone and it didn't smear the grease around. The only way to get a clean screen is if I use a micro fiber clothe with some water. Also I noticed that my screen is not as bright as before with the new screen protector, especially when using it outdoors.
I was thinking about remove the screen protector all together. Since our phone has Corning® Gorilla® Glass 3, it "should" be fine. But before I remove the new screen protector, just wondering if anyone is going bare on the screen and if they have any issues with scratched screen.
Thanks

I haven't had any screen protector on my phone since october. Screen is fine, although I haven't dropped my phone.

I have been using the same screen protector which i bought from aliexpress and i can feel the brightness problem but i am fine with it since this tmp glass removes entirely the ugly black borders from the phone.
I dont know if there is a good color tempered glass which does both.

Just removed the aftermarket screen protector today and going bare. So far it seems fine and resistant to scratches as well. It feels a lot better than the stock screen protector or the aftermarket one. It is a lot brighter and really smooth. Another thing that I noticed is that it is a lot more sensitive to the touch.

Never used any sort of screen protector on my phones. Never a single scratch.
As long as you do not put any other items in a pocket with a phone, it should be fine.

I have tried 3-4 different screen protectors and none of them seem to stick properly. They never want to stick on either (or both) the left and right sides of the screen. idk what the issue is but I've never had that problem on other phones

I'm too afraid to not use any screen protector. The camera lens scratches so easily that I don't trust the glass at all.
Sent from my LEX727 using Tapatalk

The stock screen protector is rubbing off so I replaced it with a new one.
https://www.amazon.com/gp/product/B0...?ie=UTF8&psc=1
Unlike the stock one, this one is the hard glass. (the stock one is a film).
The problem with this screen protector is that it is a grease/finger print magnet. Ususally I can remove the grease/finger print from the screen by rubbing it on my shirt. With this one, it just moves the finger print grease around. No my shirt is not greasy because I tried it on another phone and it didn't smear the grease around. The only way to get a clean screen is if I use a micro fiber clothe with some water. Also I noticed that my screen is not as bright as before with the new screen protector, especially when using it outdoors.
I was thinking about remove the screen protector all together. Since our phone has Corning® Gorilla® Glass 3, it "should" be fine. But before I remove the new screen protector, just wondering if anyone is going bare on the screen and if they have any issues with scratched screen.
Click to expand...
Click to collapse
I Have the same problem. While the screen protector is ok and protects the phone, it catches fingerprints and the most anoying thing, outside it reflects everything and I can't see very well. I didn't find any matte or anti-glare tempered glass screen for le pro 3. Only iphone and something else. If anyone finds something good post a link please.

motanel_pufos said:
I Have the same problem. While the screen protector is ok and protects the phone, it catches fingerprints and the most anoying thing, outside it reflects everything and I can't see very well. I didn't find any matte or anti-glare tempered glass screen for le pro 3. Only iphone and something else. If anyone finds something good post a link please.
Click to expand...
Click to collapse
It has been a week now since I removed all screen protector and I am happy that I did it. It feels so much better and I can say that the gorilla glass on this is legit. I work in a warehouse and I have my keys and a box cutter in my pockets. I try to keep them away from my phone but when you are moving fast, sometimes the box cutter ends up in the same packet as my phone. So far still no scratch on the screen.

I'm still keeping mine, even if reflects everything because on my old phone covered with full cover, front and back, dropped on a corner of the screen, the screen protector took the fall and broke instead of the actual screen. So better to be cautios.

Mine came with a screen protector (X727), but I ripped it off very quickly. I haven't broken a single smartphone yet.

No screen protector since day one. No case either. Dropped it few times and cosmetic glass around camera cracked. Front screen is pristine, which is surprising since I am not careful with it.
Sent from my LEX727 using Tapatalk

Found these cases on Amazon that provide screen protection. I have used similar cases on other devices and have had good luck in preserving the screen without the use of a screen protector:
kw mobile canvas case
kw mobile cover shell case

Never used any screen protector on my smartphones, since my first Sony Ericson P800 years before the first iPhone were released...
Never broke the screen, had a few small scratches on some of them (not all though), and I usually keep my devices for 3 to 4 years. My previous phone was a Samsung Note 2, the screen is still perfect.
I will not put any screen protector on my Le Pro 3 either...

I was using the stock screen protector which was preinstalled until today. Sand scratched it so I removed it.
Sent from my LEX727 using Tapatalk

Is anyone having issues with corners of your tempered glass protectors not adhering properly? I'm getting white ghosting all around the protector. Replacement ones had the same effect...

RussianBear said:
Is anyone having issues with corners of your tempered glass protectors not adhering properly? I'm getting white ghosting all around the protector. Replacement ones had the same effect...
Click to expand...
Click to collapse
Same problem for me.I think its because of the curve of the screen

I got the full coverage one from aliex, no problems with adhesion, but it's an awfull magnet for smudges and fingerprints, and dulls the colors of the screen, gonna run it a few days just for kicks, but I'll remove it for sure.
And oh, havent had a screen protector, not since day one, and no problems, not a scratch on my phone (I do take care of my gadgets though)

Valinos said:
Same problem for me.I think its because of the curve of the screen
Click to expand...
Click to collapse
mine doesn't even cover the screen fully...baffled by this, honestly.

I removed screen protector today. Got sick of dust and other sht all around due to corners of glass not adhering properly. The phone looks much better, so far so good.
Just in case try to avoid keeping it with keys etc. Also check this .

How to get rid of rainbow effect on 3D TGSP?

Is there a way to remove it? I have tried OnePlus version and Orzly version and they are all the same. Also Orzly has those weird dots in the glass.

Can you share some pics

i agree, almost all glass protectors got this effect... some more some less, thats why im not using any and enjoying without

I have rainbow effect even on that protective something (dont know word :| )
I thought it is because of Amoled but seems like it isn't that case then ..

dasti555 said:
I have rainbow effect even on that protective something (dont know word :| )
I thought it is because of Amoled but seems like it isn't that case then ..
Click to expand...
Click to collapse
It's because the screen is not designed to stick to the display like other tempered screen protectors. This is a 3d tempered which has adhesive around the corners that make it stick to the screen.

alukarulz said:
It's because the screen is not designed to stick to the display like other tempered screen protectors. This is a 3d tempered which has adhesive around the corners that make it stick to the screen.
Click to expand...
Click to collapse
But I mean that pre-applied protector

dasti555 said:
But I mean that pre-applied protector
Click to expand...
Click to collapse
I didn't have it on my pre applied. I kept my pre applied on until it got scratched up and removed it.

I am using a Orzly tgsp and it's a little rainbowy, but the thing that bothers me the most is the insane reflection. In clear daylight it's hard to see the screen instead of my face..

sharp edges?

Hey guys!
Just received this awesome piece of technology, called oneplus 6t!
Now I just have one point that makes me wonder if it is absolutely normal: do you also have sharp edges? I mean the plastic between the display and the metal frame. It has a small sharp border on all 4 edges.

naja09 said:
Hey guys!
Just received this awesome piece of technology, called oneplus 6t!
Now I just have one point that makes me wonder if it is absolutely normal: do you also have sharp edges? I mean the plastic between the display and the metal frame. It has a small sharp border on all 4 edges.
Click to expand...
Click to collapse
It's the screen protector OnePlus has installed on the 6t. I have it too. Waiting for the 3d screen protector from them to replace.

Poloasis said:
It's the screen protector OnePlus has installed on the 6t. I have it too. Waiting for the 3d screen protector from them to replace.
Click to expand...
Click to collapse
Nono, I mean the plastic layer between the glass and the metal frame.
I don't like screen protectors so I removed it already

naja09 said:
Nono, I mean the plastic layer between the glass and the metal frame.
I don't like screen protectors so I removed it already
Click to expand...
Click to collapse
Did not notice it.

naja09 said:
Nono, I mean the plastic layer between the glass and the metal frame.
I don't like screen protectors so I removed it already
Click to expand...
Click to collapse
I do not see this.

Ive taken off screen protectors that have come with OnePlus devices for the longest time because of the sharp edge feel.
Turns out the 6T has a terribly sharp bumper between the aluminum rail and front glass, so now with the screen protector and the protruding bumper, we have double the sharp edges.
Its the sole reason why i havent removed the screen protector this time lol, why get rid of a sharp edge if im still gonna feel it no matter what.
Its super annoying -_-

If you're feeling that second edge, you're swiping WAY too low on the screen.

imatts said:
Ive taken off screen protectors that have come with OnePlus devices for the longest time because of the sharp edge feel.
Turns out the 6T has a terribly sharp bumper between the aluminum rail and front glass, so now with the screen protector and the protruding bumper, we have double the sharp edges.
Its the sole reason why i havent removed the screen protector this time lol, why get rid of a sharp edge if im still gonna feel it no matter what.
Its super annoying -_-
Click to expand...
Click to collapse
Yea doesn't feels "perfect".
But thank you for the confirmation. Now I don't have to create a rma