Hello, i accidentally wiped system in TWRP, i can go to fastboot mode and TWRP only, i am stuck on boot loop. I tried many ways to unbrick but i dont know what more to do. When i try to push with ADB nothing is happening, was waiting like 1 hour, when i try to sideload it just give me "Total xfer: 0.00x" message and nothing is happening. I can see the phone storage in my computer but i cant paste anything there, when i try it is saying "Cannot copy item the device has either stopped responding or has been disconnected."
Thanks for every help.
*UPDATE - I tried to flash it trough Smart Phone Flash Tool but it is saying s auth_handle_is_not_ready , that i need some auth file... Cant find it anywhere..
ALL SOLVED (Managed to transfer update.zip trough the recovery from PC.)
Related
Hello everyone !
I have big troubles with my Lg g2 d802.
Yesterday i want to intall crdroid 5.0 on my Lg g2 on Official 4.4.2, so i've:
Root my phone
Install CWM Manager
Set CWM Recovery
Reboot in recovery
Use ADB Mode
Use ADB on my PC to send crDroid zip by sideload
During sideload, after full download, there was an error assert failed. So installation failed, and i've decided to reboot my phone.
Problem is here, my phone boot, display LG Logo and after 5 seconds, Lg Logo with "security error" message, then stop alone and reboot again, and again.
I have tried following procedures :
Power off completely my phone and then Volume down+PWR to enter in recovery : FAIL
Volume Up and then put USB cable to enter download mode : FAIL
Connect with USB on Ubuntu to try to reset .img files : FAIL (Phone invisible on my pc, even not recognize)
So i cannot go to Recovery Mode, Download Mode and my phone isn't recognize on PC.
I don't have any other ideas and i am here to asking help .
Thxs for reading, and i pray for a miracle !
Wallouf said:
Hello everyone !
I have big troubles with my Lg g2 d802.
Yesterday i want to intall crdroid 5.0 on my Lg g2 on Official 4.4.2, so i've:
Root my phone
Install CWM Manager
Set CWM Recovery
Reboot in recovery
Use ADB Mode
Use ADB on my PC to send crDroid zip by sideload
During sideload, after full download, there was an error assert failed. So installation failed, and i've decided to reboot my phone.
Problem is here, my phone boot, display LG Logo and after 5 seconds, Lg Logo with "security error" message, then stop alone and reboot again, and again.
I have tried following procedures :
Power off completely my phone and then Volume down+PWR to enter in recovery : FAIL
Volume Up and then put USB cable to enter download mode : FAIL
Connect with USB on Ubuntu to try to reset .img files : FAIL (Phone invisible on my pc, even not recognize)
So i cannot go to Recovery Mode, Download Mode and my phone isn't recognize on PC.
I don't have any other ideas and i am here to asking help .
Thxs for reading, and i pray for a miracle !
Click to expand...
Click to collapse
Even I have suffered with same problem
Follow this thread I think you must have seen this thread it is the best solution till date from recovering the problem you are in right now.
http://forum.xda-developers.com/lg-g2/general/lg-g2-unbrickable-fix-real-hard-brick-t2904404
But you have to mess up with your phone motherboard but its really very easy. Just follow it. I have recovered mine from this.
Ok i'll Try it ! Thx you !
I have tried your link and its working. My phone is alive ! Thx you .
I have a last problem. My phone has 2 black lines on the screen from top to bottom. This appear after i had flash new .img files. Does anyone have an idea about what i need to do to remove these ?
Thx you again
Hi,
I recently acquired a Huawei Ascend G7...smashed screen and what not, replaced the screen on the phone and it starts bootlooping.
Booted into recovery, (already had TWRP), Tried flashing a zip file and i consistently get "Error executing updater binary". I have tried a few things that I have found on here but nothing seems to be working and its just stuck in boot loop. HiSuite doesn't recognize the device in fastboot mode. Before I go any further I was wondering any advice anyone could offer me on how to resolve this issue. Thanks
tdstt said:
Hi,
I recently acquired a Huawei Ascend G7...smashed screen and what not, replaced the screen on the phone and it starts bootlooping.
Booted into recovery, (already had TWRP), Tried flashing a zip file and i consistently get "Error executing updater binary". I have tried a few things that I have found on here but nothing seems to be working and its just stuck in boot loop. HiSuite doesn't recognize the device in fastboot mode. Before I go any further I was wondering any advice anyone could offer me on how to resolve this issue. Thanks
Click to expand...
Click to collapse
The "Error executing updater binary" may be due to your device name not listed in the zip file. In the updater-script file the first line is usually an assert, you can try to remove that line, re-zip the whole thing and try to flash again.
Hello,
Ok, here is the situation
I have a Zuk Z1 with last COS update 12.1 with locked bootloader, no root etc ... (I didn't touch anything).
Yesterday, it reboot by itself but I got bootloop (starting apps then again lenovo boot image ...)
I try to factory reset by using the recovery metohd, it's start normally (optimizing apps ...) but then reboot and again bootloop ...
So I try to sideload the official COS ROM from Cyanogen Support (cm-12.1-YOG4PAS9IG-ham-signed-d4fc2c5394.zip), but the sideload stuck at 47% and saying total xfer: 1.00x and the phone go back to recovery but still have boot loop ...
I try to boot in fastboot and use the All In One tool to flash official ROM but didn't work (Its say that the bootloader is lock)
I find without knowing this menu a debugging hardware tool test, and then I run the test, its say SD : Fail and in another I got SD : Fail and no sd fuse in dir
I saw many thread here and on google, and some say that we have to use qfil/qpst method, and find this which seems complete : http://www.androidbrick.com/lenovo-zuk-phones-qfil-roms-unbrick-guide/
But as I don't know if its hardware issue or soft brick ...
Could someone help me to recover my phone to COS or CM by using the right method ?
Thank you !
wackou said:
Hello,
Ok, here is the situation
I have a Zuk Z1 with last COS update 12.1 with locked bootloader, no root etc ... (I didn't touch anything).
Yesterday, it reboot by itself but I got bootloop (starting apps then again lenovo boot image ...)
I try to factory reset by using the recovery metohd, it's start normally (optimizing apps ...) but then reboot and again bootloop ...
So I try to sideload the official COS ROM from Cyanogen Support (cm-12.1-YOG4PAS9IG-ham-signed-d4fc2c5394.zip), but the sideload stuck at 47% and saying total xfer: 1.00x and the phone go back to recovery but still have boot loop ...
I try to boot in fastboot and use the All In One tool to flash official ROM but didn't work (Its say that the bootloader is lock)
I find without knowing this menu a debugging hardware tool test, and then I run the test, its say SD : Fail and in another I got SD : Fail and no sd fuse in dir
I saw many thread here and on google, and some say that we have to use qfil/qpst method, and find this which seems complete : http://www.androidbrick.com/lenovo-zuk-phones-qfil-roms-unbrick-guide/
But as I don't know if its hardware issue or soft brick ...
Could someone help me to recover my phone to COS or CM by using the right method ?
Thank you !
Click to expand...
Click to collapse
Go with qpst/qfil method to recover your phone
And did you tried changing the USB port or cable while side loading cos ROM .. Cause most of issues are solved by the changing USB port or cable.. So try this.. Or else qfil is the option
shubhambhise said:
Go with qpst/qfil method to recover your phone
And did you tried changing the USB port or cable while side loading cos ROM .. Cause most of issues are solved by the changing USB port or cable.. So try this.. Or else qfil is the option
Click to expand...
Click to collapse
Hello,
I got help on the telegram group, we try many thing, the result is that I can only get ZUI working, if flashing COS via QFIL, I get the same result, if I flash ZUI, unlock bootloader, flash TWRP, wipe everything, then sideload CM13, TWRP say that no os is installed and I get a bootloop at the bootloader ...
ZUI is good, but I get some error regarding notification.
If you have any other idea ?
wackou said:
Hello,
Ok, here is the situation
I have a Zuk Z1 with last COS update 12.1 with locked bootloader, no root etc ... (I didn't touch anything).
Yesterday, it reboot by itself but I got bootloop (starting apps then again lenovo boot image ...)
I try to factory reset by using the recovery metohd, it's start normally (optimizing apps ...) but then reboot and again bootloop ...
So I try to sideload the official COS ROM from Cyanogen Support (cm-12.1-YOG4PAS9IG-ham-signed-d4fc2c5394.zip), but the sideload stuck at 47% and saying total xfer: 1.00x and the phone go back to recovery but still have boot loop ...
I try to boot in fastboot and use the All In One tool to flash official ROM but didn't work (Its say that the bootloader is lock)
I find without knowing this menu a debugging hardware tool test, and then I run the test, its say SD : Fail and in another I got SD : Fail and no sd fuse in dir
I saw many thread here and on google, and some say that we have to use qfil/qpst method, and find this which seems complete : http://www.androidbrick.com/lenovo-zuk-phones-qfil-roms-unbrick-guide/
But as I don't know if its hardware issue or soft brick ...
Could someone help me to recover my phone to COS or CM by using the right method ?
Thank you !
Click to expand...
Click to collapse
Hope this will help you
Check this out
http://forum.xda-developers.com/zuk-z1/help/helpppp-t3505990
http://forum.xda-developers.com/zuk-z1/general/guide-how-to-unlock-root-install-twrp-t3394037
This will help you
hello,
i had a problem with my Redmi 2 Enhanced (HM2014813).
my phone had no problem until one week ago. the phone suddenly won't detect any simcard.
so i try googling and find that was the problem when changing from chinese to global rom
(i don't know on this point cause my phone was fine until now), so i tried to flash the modem firmware
via mi recovery, but after instalation my phone was boot stuck at mi logo. it won't booting no matter
what i do. i tried to wipe my phone via mi recovery but no use, flashing won't do and it said
unable to locate update.zip
Click to expand...
Click to collapse
, so i tried flashing TWRP recovery via fastboot mode. when i want to flash the phone but it getting error like "unable to mount /data", etc. try to find a way and my friend said try to wipe my data first on TWRP so i do it and reboot, but after that my phone won't wake up even the battery indicator doesn't turned on, trying to connect my phone to pc and my pc mount multiple drive. flashing with miflash do nothing as the status said
the filename, directory name, or volume label syntax is incorrect.(0x8007007b: Delete Drive Layout)
Click to expand...
Click to collapse
.
i'm very new to android so if anybody had solution please tell me.
and sorry for my bad english.
is ur phone booting in fastboot mode??
I was using Lineage OS on my Asus Zenfone 3 (ZE552KL). When my battery was empty it's stucks on fastboot mode. Got stuck unlocking my bootloader via adb. Phone is detecting in ADB. The phone is getting stuck at ASUS logo and I cant boot to recovery either. It does get detected by fastboot but nothing more. I have tried :-
(1) It only seems unlocked boot screen and the choices is start volume up countinue boot but isn't any happening.
(2) I used Asus flashtool (various versions- 1.0.45). The latest one says battery is -1% while the earlier version returns various errors including "ftp request server log access is denied" and "failed to write partition".
(3) I have (seemingly) couldn't recovery and boot images.
(4) I flash factory RAW rom, and then Stock Rom but It's stuck on Fastboot Mode.
Read a lot of threads but not much seems to be working.
Help please !
Thanks
1st Try to Flash with latest RAW,
If fail, Try with CSC
If still fail try with EDL File (Unbrick) - ZE552KL Libra_QFIL_8953_01020_20170714_Aboot.7z
eemmiirr said:
I was using Lineage OS on my Asus Zenfone 3 (ZE552KL). When my battery was empty it's stucks on fastboot mode. Got stuck unlocking my bootloader via adb. Phone is detecting in ADB. The phone is getting stuck at ASUS logo and I cant boot to recovery either. It does get detected by fastboot but nothing more. I have tried :-
(1) It only seems unlocked boot screen and the choices is start volume up countinue boot but isn't any happening.
(2) I used Asus flashtool (various versions- 1.0.45). The latest one says battery is -1% while the earlier version returns various errors including "ftp request server log access is denied" and "failed to write partition".
(3) I have (seemingly) couldn't recovery and boot images.
(4) I flash factory RAW rom, and then Stock Rom but It's stuck on Fastboot Mode.
Read a lot of threads but not much seems to be working.
Help please !
Thanks
Click to expand...
Click to collapse
I have this problem too. How did you fix it ?