Hi,
I recently acquired a Huawei Ascend G7...smashed screen and what not, replaced the screen on the phone and it starts bootlooping.
Booted into recovery, (already had TWRP), Tried flashing a zip file and i consistently get "Error executing updater binary". I have tried a few things that I have found on here but nothing seems to be working and its just stuck in boot loop. HiSuite doesn't recognize the device in fastboot mode. Before I go any further I was wondering any advice anyone could offer me on how to resolve this issue. Thanks
tdstt said:
Hi,
I recently acquired a Huawei Ascend G7...smashed screen and what not, replaced the screen on the phone and it starts bootlooping.
Booted into recovery, (already had TWRP), Tried flashing a zip file and i consistently get "Error executing updater binary". I have tried a few things that I have found on here but nothing seems to be working and its just stuck in boot loop. HiSuite doesn't recognize the device in fastboot mode. Before I go any further I was wondering any advice anyone could offer me on how to resolve this issue. Thanks
Click to expand...
Click to collapse
The "Error executing updater binary" may be due to your device name not listed in the zip file. In the updater-script file the first line is usually an assert, you can try to remove that line, re-zip the whole thing and try to flash again.
Related
Hello,
I own a Huawei P8 L09, bootloader unlocked, rooted and with TWRP recovery.
I tried this morning to flash a new rom using TWRP recovery.
Problem is that I do believe I wiped to many partitions and I ended up with a bootloop.
I could at first access 3 times the emui erecovery (btw, Wifi recovery failed) but not anymore (is it related to the battery level ? I don't know how much I still have)
Following a lot of threads here and on some other forums (I've been searching now for approx. 7 hours...) :
I downloaded a update stock ROM (B170 something), I extracted Boot, System, Recovery and Cust
I entered bootloader mode (it's the only mode I can go to; recovery No, Download mode neither)
and on my computer I typed in the cmd "fastboot flash recovery recovery.img" same with system, cust and boot.
All of them said "Okay" but the bootloop is still there and I can't acess any other mode or shut the device off.
Also, my bootloader indicate that i'm "unlocked" but when I try to do something as :
"fastboot erase cache" it says "remote: not allowed" or something like that.
I tried the SD card flash method but I can't even acess the 3-button mode (doesn't work - bootloop again).
Finally, I've got 2 questions :
1) Is there a solution ? Is there/was there anybody in the same situation ?
2) Does the battery level influence wether I may or not enter any mode ? like b.e. under 30% I can't access recovery or something like that ?
Thanks in advance for your help and sorry for my bad english.
Greetings from Belgium !
Jules
Hi!
I have the same situation as you do, All i know is that you can access the eRecovery only if you're plugged in.
But it's completely useless. Have you found any solutions yet?
Edit:
i struggled and i'm still struggling but i figured out that I need the recovery and boot img of the version i was on previously. In my case that is B350.
The main mirror is down but i managed to find another one: https://mega.nz/#!NAcgQY7Y!I4eRfkaq62J31csv_wZ8_nTzmUbWPX71JUicDysjus8
after flashing them i was able to partially flash (using vol+-&pwr) B170 (it only went up to 90% with my USB attached, fails without USB)
At my surprise it booted B170 even if it didn't complete, however right now it keeps rebooting every minute. I'll update if i manage to fix this
I have the same problem as you both. To flash boot.img and other files by fastboot we need to unlock bootloader. To unlock bootloader we need to have Imei, Product Id and SN, but I can't read it because phone won't turn on.
Anyone know how to get this info?
you can read these info from the packaging box!
I managed to fix my issues (i believe) by continuously flashing and flashing versions. I never really managed to fully OTA update to 100% due to some "CUST error" but from B350 i managed to "update" to B170, then to B200, then to B321a.
Now i just installed TWRP and rooted it and on the process of installing xposed (if possible).
I wasted a good 6-7 hours on everything already
Well now I actually sent my phone in repair, given that it still was under warranty.
If they return it unrepeared, i will try it your way, Nikooo777. Thanks.
TukAliveFra said:
Well now I actually sent my phone in repair, given that it still was under warranty.
If they return it unrepeared, i will try it your way, Nikooo777. Thanks.
Click to expand...
Click to collapse
you gonna pay for the repair..
Hello, i accidentally wiped system in TWRP, i can go to fastboot mode and TWRP only, i am stuck on boot loop. I tried many ways to unbrick but i dont know what more to do. When i try to push with ADB nothing is happening, was waiting like 1 hour, when i try to sideload it just give me "Total xfer: 0.00x" message and nothing is happening. I can see the phone storage in my computer but i cant paste anything there, when i try it is saying "Cannot copy item the device has either stopped responding or has been disconnected."
Thanks for every help.
*UPDATE - I tried to flash it trough Smart Phone Flash Tool but it is saying s auth_handle_is_not_ready , that i need some auth file... Cant find it anywhere..
ALL SOLVED (Managed to transfer update.zip trough the recovery from PC.)
Hello,
I'll try to detail as much as I can to explain how i ended up Bootlooping :
I tried today to root my LG H870. (imported from Germany, according to the seller).
I followed the tutorial on xda to unlock the Bootloader on the device.
After flashing it, it launched Android the 1st time without difficulties.
I rebooted into TWRP, flashed supersu, then rebooted into Android. Problems started there, the system told me my partition was encrypted, and asked if i wanted to reinitialize it. After doing so, it's been stuck, bootlooping to TWRP, the internal partition empty.
I followed numerous tutorial on how to flash a stock ROM through TWRP, Fastboot, ADB Sideload, without any success.
With TWRP, it was always ending up saying the flash wasdone, without writing a single file in the partition.
I also tried installing stock ROM with LGUP, but once again, didn't seem to work. While in download mode, it was either telling me the phone was an unknown model, on port COM3, or that there was no handset connected.
I then followed another guide, using LG Firmware Extract and LG Flash Tool. It didn't work as expected, but, I don't really know how, it made LGUP seeing my phone correctly. I was then able to flash a stock ROM (H87010f). No error during the process.
After the LG Logo, i get now a blue screen, saying for some seconds "Encryption Progress", and after that "Factory Reset Status", with a big red "2", and it gets stucks there.
Once again, if I get into download mode and into LGUP, i get now the "no handset connected" message.
Is someone on here able to help me?
If more infos are needed, tell me, i'll try to answer!
Thank you all!
Hello everyone,
by mistake i deleted the OS on my LG G6, i tried to reinstall a new OS from TRWP, but i ended up getting a bunch of errors (the phone failed mounting /data and /storage). I tried to fix that by changing filesystem, but the phone got stuck in the middle of the process.
After a reboot, i find myself stuck at the recovery boot screen. Since the OS is no more, i can't even enable the USB Debug option to use adb commands.
Is there no hope for my phone? What should i do? Thank you in advance! (Sorry for my poor english!)
TheGaijin90 said:
Hello everyone,
by mistake i deleted the OS on my LG G6, i tried to reinstall a new OS from TRWP, but i ended up getting a bunch of errors (the phone failed mounting /data and /storage). I tried to fix that by changing filesystem, but the phone got stuck in the middle of the process.
After a reboot, i find myself stuck at the recovery boot screen. Since the OS is no more, i can't even enable the USB Debug option to use adb commands.
Is there no hope for my phone? What should i do? Thank you in advance! (Sorry for my poor english!)
Click to expand...
Click to collapse
There is no problem just flash stock rom using LG UP
if u had a problem just ask
Or download a Stock ROM and flash it with TWRP.
Put in download mode and flash KDZ file with LGUP
or
Boot into fasboot mode and use CMD or terminal to flash twrp
or
same as above and use all-in-one tool to flash recovery etc.
Loads of ways to fix this issue
I've recently repaired my Huawei P8 Lite after it's screen was mutilated and such and I decided to try flash a different ROM onto the device, I wiped my entire device and restarted it instead of flashing the ROM I needed to and I got led into a bootloop which presented me with the Huawei logo until the device just died from battery loss.
I was able to get myself into TWRP before the bootloop occured everytime the phone auto-restarted and I tried flashing the ROM which was Resurrection Remix V.6 and in the end near its installation I did notice it printed out two lines saying "Unknown command" and then continued to say it finished the installation succesfully but when I restarted my phone, there was nothing but the bootloop.
I ended up getting frustrated at left my phone on my desk untouched and now I'm presented with a Rescue Mode panel when I try to boot into TWRP to try and flash a stock ROM. The panel presents me with a message asking me to
Please update system again
Func NO : 11 (recovery image)
ERROR NO : 2 (load failed!)
I'm able to hold my power button and volume button up to boot into Huawei eRecovery but it's as useless as this phone currently. Please note I've tried methods involving connecting my phone to my PC and troubleshooting it from here but my PC does not recognize my phone at all, it never did whilst it was running the stock firmware either. Any help is gladly appreciated.
My phone model for anyone wondering : Huawei P8 Lite ALE-L02
Update :
I've managed to flash TWRP onto my device again after enough times battling the rescue mode, I no longer get the function errors however I have discovered a problem that runs deeper than just a few missing .img's. I've re-flashed Resurrection Remix again with gapps and no errors were presented within the installation processes, I rebooted my system and got put straight back into a boot loop. I decided to go back into recovery and to my surprise there's nothing inside my internal directory besides an empty TWRP folder.
I'm assuming that my device is not properly installing/saving the files where they need to be.