Hi all,
My Nubia Z17 was brick while try imei change. it is on QDLoader 9008 mod. Please help. ( I apologize for my poor english)
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
E5MER said:
Hi all,
My Nubia Z17 was brick while try imei change. it is on QDLoader 9008 mod. Please help. ( I apologize for my poor english)
Click to expand...
Click to collapse
Can you boot to fastboot model by pressure Volume- and Power button at same time? If you can, you select reboot to emergency recovery , which led you to recover the factory recovery. After it is completed, pressing volume+ and Power button, boot it into the recovery mode. then you select install from OTG USB where you should have stored a 2.44 or 2.39 version of ROM. After it finishes, you need reset to factory setting.
Take it easy, it is not easy to have phone become a brick. Good Luck.
Kind Regards
backboycn said:
Can you boot to fastboot model by pressure Volume- and Power button at same time? If you can, you select reboot to emergency recovery , which led you to recover the factory recovery. After it is completed, pressing volume+ and Power button, boot it into the recovery mode. then you select install from OTG USB where you should have stored a 2.44 or 2.39 version of ROM. After it finishes, you need reset to factory setting.
Take it easy, it is not easy to have phone become a brick. Good Luck.
Kind Regards
Click to expand...
Click to collapse
Thanks for anwser but my phone does not open in any way. only sees pc as in picture
E5MER said:
Thanks for anwser but my phone does not open in any way. only sees pc as in picture
Click to expand...
Click to collapse
install android drivers . and ın picture rıght click wıth mouse on qualcom and then see if u can update ( manuel and choıce android so then you can use adb command try to go fastboot or bootloader.
sewkanteam said:
install android drivers . and ın picture rıght click wıth mouse on qualcom and then see if u can update ( manuel and choıce android so then you can use adb command try to go fastboot or bootloader.
Click to expand...
Click to collapse
all driver insalled. But adb commands are not working.
I already have the same problem with my oneplus. You need a qualcomm tool (In OPO the tool was Msm8974DownloadTool) to send a special factory firmware to return it to life.
Now I dont think that you have this any of this in Z17, so I think the best way to resolve that problem is contact Nubia support.
B_RoDaS said:
I already have the same problem with my oneplus. You need a qualcomm tool (In OPO the tool was Msm8974DownloadTool) to send a special factory firmware to return it to life.
Now I dont think that you have this any of this in Z17, so I think the best way to resolve that problem is contact Nubia support.
Click to expand...
Click to collapse
I tried but it didn't work. And no nubia support in my country. If i can't fix the problem, i'll send my nubia to China
Try the Nubia recovery tool - https://cloud.mail.ru/public/5ta9/9xzYctmjk
Mackay53 said:
Try the Nubia recovery tool - https://cloud.mail.ru/public/5ta9/9xzYctmjk
Click to expand...
Click to collapse
Is this nubia emergency tool ? So it does not support Z17. I've tried it before nubia emergency tool.
Have u fixed ur phone
apexashwin said:
Have u fixed ur phone
Click to expand...
Click to collapse
No. nothing has changed :-/
So much chinese... I should start to learn that
OperatorB said:
So much chinese... I should start to learn that
Click to expand...
Click to collapse
Exactly
E5MER said:
Exactly
Click to expand...
Click to collapse
I've had my Z17 Mini hardbricked. Tried Nubia Emergency Tool but find out it does not support Z17 Mini. So sad. Any other way instead of waiting for the newer version???
bountyhunter said:
I've had my Z17 Mini hardbricked. Tried Nubia Emergency Tool but find out it does not support Z17 Mini. So sad. Any other way instead of waiting for the newer version???
Click to expand...
Click to collapse
i dont know. i sent my z17 to China :-/
E5MER said:
i dont know. i sent my z17 to China :-/
Click to expand...
Click to collapse
Damn too bad. It must take long time
Another fixing method is to use JTAG if u are impossibly professional.
Think about a good story and send back to the seller is my advice, sorry.
is the problem solved ?
Z17mini - Is the problem solved?
Hi Bro!
Is your device back to life?
If so How?
Please, mine is still dead.
It was used not even for two days.
bountyhunter said:
I've had my Z17 Mini hardbricked. Tried Nubia Emergency Tool but find out it does not support Z17 Mini. So sad. Any other way instead of waiting for the newer version???
Click to expand...
Click to collapse
Can someone please make backup of qualcomm files and uplad me ? for solve hardbrick
THANKS
Related
Hi i have a problem. I programing mi galaxy ii with odin i istall a custom rom a all is perfect but with go to overclock i get a factory reset and cache and mi cellphone reboot and only says in the boot s of galaxy only i see the s boot and the cellphone reboot automatic. Is bricked i need help or tread for fixed this problem !!!
billaboy said:
Hi i have a problem. I programing mi galaxy ii with odin i istall a custom rom a all is perfect but with go to overclock i get a factory reset and cache and mi cellphone reboot and only says in the boot s of galaxy only i see the s boot and the cellphone reboot automatic. Is bricked i need help or tread for fixed this problem !!!
Click to expand...
Click to collapse
Wrong thread..... can you get into recovery? Volume up - home button - power.
How to unbrick with video
http://www.youtube.com/watch?v=JmvCpR45LKA
don't
THE RECOVERY DON'T WORK I NEED A TUTORIAL FOR A RESOLVED A PROBLEM...
Re-flash.
billaboy said:
THE RECOVERY DON'T WORK I NEED A TUTORIAL FOR A RESOLVED A PROBLEM...
Click to expand...
Click to collapse
You need to put the phone into download mode. Volume down -> Home button -> Power.
Then use Odin to flash a new ROM. Best advice is to google "flash rom using odin galaxy s2".
Edit - follow this - http://www.youtube.com/watch?v=EsNUc7-xqEs&feature=related
Re-flash, enter recovery, wipe data.
I RE-FLASH
I REAFLAS THE CELLPHONE WITH ODIN AND THE CELLLPHONE IS BRICKED IN THE S OF GALAXY AND AUTOMATIC RESTAR ... ANY SOLUTION!!
Maybe a bad download try downloading rom again and then reflash
Sent from my MB860 using xda premium
billaboy said:
I REAFLAS THE CELLPHONE WITH ODIN AND THE CELLLPHONE IS BRICKED IN THE S OF GALAXY AND AUTOMATIC RESTAR ... ANY SOLUTION!!
Click to expand...
Click to collapse
Was it in download mode?? You used the right firmware?
Have you tried installing CF root?
billaboy said:
I REAFLAS THE CELLPHONE WITH ODIN AND THE CELLLPHONE IS BRICKED IN THE S OF GALAXY AND AUTOMATIC RESTAR ... ANY SOLUTION!!
Click to expand...
Click to collapse
GO TO RECOVERY AND DO A FACTORY RESET!
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
billaboy said:
I REAFLAS THE CELLPHONE WITH ODIN AND THE CELLLPHONE IS BRICKED IN THE S OF GALAXY AND AUTOMATIC RESTAR ... ANY SOLUTION!!
Click to expand...
Click to collapse
Thats not bricked, bricked is unable to operate the device even if the battery is full. Try to take out your battery and put it back in and press Vol up + home button + power button
Sent from my GT-I9100 using xda premium
billaboy said:
THE RECOVERY DON'T WORK I NEED A TUTORIAL FOR A RESOLVED A PROBLEM...
Click to expand...
Click to collapse
Hi,
Can you download stock ROM (original ROM) from www.samfirmware.com and instal using Odin mode. You get tutorial in that site itself.
Best of luck man
Sent from my GT-I9100 using XDA App
That's not really a brick...but OK.
Sent from my Incredible 2 using xda premium
i got this prob too... after change rom miui to lithening.... it keep restarting...after i flash the stock firm ware.. i ok...
[SIZE=""]Questions or Problems Should Not Be Posted in the Development Forum
Please Post in the Correct Forums and Read THIS
[/SIZE]
Moving to General
Certainly not bricked...
And ps: TYPING IN CAPSLOCK DOESNT SOLVE ANYTHING !!!!!!
sendhiloo7 said:
Hi,
Can you download stock ROM (original ROM) from www.samfirmware.com and instal using Odin mode. You get tutorial in that site itself.
Best of luck man
Sent from my GT-I9100 using XDA App
Click to expand...
Click to collapse
Why are you telling him to flash the firmware again? He's flashed it and is bootlooping because of come data incompatibility that requires him to do a factory reset from recovery and all will be working properly after the reset.
what an ass, maybe this phone will work, if he ask more gentle for the solution
The OP is now over in our forums now trying to unbrick what appears to be his third device.
http://forum.xda-developers.com/showthread.php?t=1319648
I'm happy to report that he has not yet educated himself on the English language since he broke his Galaxy S II. Hilarity ensues.
There have not been any new updates on TWRP for lenovo . SevenMaxs has been making. TWRP for lenovo a6000 but its in russian ! Pls port TWRP for Lenovo A6000
BallisticSwami said:
There have not been any new updates on TWRP for lenovo . SevenMaxs has been making. TWRP for lenovo a6000 but its in russian ! Pls port TWRP for Lenovo A6000
Click to expand...
Click to collapse
Here it is. TWRP 3.0.2
Thanx a lot!
BTW How did u get it?
ShakuniMama said:
Thanx a lot!
BTW How did u get it?
Click to expand...
Click to collapse
Talent bhai talent..!!
Just kidding....some million years ago, someone posted the link to the lenovo forums for sevenmax's recovery. I went to that link and got the latest version.
BTW, nice name :silly:
sasukay said:
Talent bhai talent..!!
Just kidding....some million years ago, someone posted the link to the lenovo forums for sevenmax's recovery. I went to that link and got the latest version.
BTW, nice name :silly:
Click to expand...
Click to collapse
I couldn't figure it at first and then I found out how to change language,
Is this for 64bit?
Irwan Fauzi said:
Is this for 64bit?
Click to expand...
Click to collapse
The architecture base of the OS does not affect the the recovery.
ShakuniMama said:
I couldn't figure it at first and then I found out how to change language,
Click to expand...
Click to collapse
how to change it ?
lokesh21 said:
how to change it ?
Click to expand...
Click to collapse
Hey thanks for sharing the latest TWRP, it seems on Russian by default. follow this step to change to your prefered language :
Press the button on second column number three from top
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Press the globe icon on the right, and then choose the language you want
Then press the button on the below.
voila
Sent from my Lenovo A6000 using XDA-Developers mobile app
Does Restore work or is there error 255?
Error 255 on restore.
Sent from my Lenovo A6000 using XDA Forums Pro.
sasukay said:
Talent bhai talent..!!
Just kidding....some million years ago, someone posted the link to the lenovo forums for sevenmax's recovery. I went to that link and got the latest version.
BTW, nice name :silly:
Click to expand...
Click to collapse
Is it working on A6000 Plus?
crownprince0015 said:
Is it working on A6000 Plus?
Click to expand...
Click to collapse
Yeah, as the name of the forum suggests "Lenovo A6000/Plus", so ofcourse this recovery is for this device only.
sasukay said:
Yeah, as the name of the forum suggests "Lenovo A6000/Plus", so ofcourse this recovery is for this device only.
Click to expand...
Click to collapse
I'm rooted now. I try to install twrp and its says its ok and finished but when im tryin to open my recovery it stuck on lenovo logo :3 helpm me pls
crownprince0015 said:
I'm rooted now. I try to install twrp and its says its ok and finished but when im tryin to open my recovery it stuck on lenovo logo :3 helpm me pls
Click to expand...
Click to collapse
What are the steps you are following for this..?
sasukay said:
What are the steps you are following for this..?
Click to expand...
Click to collapse
I tried to flash it using cmd but nothing happen. And i tried to use flashify but it stuck in lenovo logo :3
crownprince0015 said:
tried to flash it using cmd but nothing happen
Click to expand...
Click to collapse
Something surely would've happened. Some error...? waiting for device...? Something else...?
sasukay said:
Something surely would've happened. Some error...? waiting for device...? Something else...?
Click to expand...
Click to collapse
I don't see any error. But i tried to wait it for 15 mins but nothing happen.
crownprince0015 said:
I don't see any error. But i tried to wait it for 15 mins but nothing happen.
Click to expand...
Click to collapse
What's displayed in the CMD window..? And also you can try rashr on phone
sasukay said:
What's displayed in the CMD window..? And also you can try rashr on phone
Click to expand...
Click to collapse
Its says OK and FINISH. But im still in stock rom?
---------- Post added at 12:07 PM ---------- Previous post was at 12:06 PM ----------
crownprince0015 said:
Its says OK and FINISH. But im still in stock rom
Click to expand...
Click to collapse
I also try to flash it using flashify app it says complete but still in stock rom
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Hi XDA members!
Today i present you my guide how to unofficially unlock the bootloader on your Redmi Note 3 Pro and RN3 Pro Special Edition phone with flashing the necessary files only. (Snapdragon only)
So let's start it!
Download the .rar from the attachment and extract it to C:\
Enter Bootloader mode by pressing the Power button + Volume down simultaneously
Connect your phone to PC with USB cable
Enter EDL mode (Follow this tutorial by @emuzychenko HERE
Start MiFlash
Select the folder you extracted (C:\RN3_unlockblonly)
Press refresh to see your phone connected
Press Flash and wait for a few seconds
Voila... Done :good:
Have a nice day!
Is this for Snapdragon version?
BraveLittleToaster said:
Is this for Snapdragon version?
Click to expand...
Click to collapse
Yes, it's for the Snapdragon version, but the Special edition variant, also known as Kate.
Working fine.... For me...
Thank you so muchhh....
Nice working... I'm using lattest kenzo global developer rom 7.2.24.... Smoothly and faster work OF UNLOCKED bootloader all tricks still now...you can your much time save using this thread... Thank again.... Sorry for my broken english...,
mstaahiri said:
Thank you so muchhh....
Nice working... I'm using lattest kenzo global developer rom 7.2.24.... Smoothly and faster work OF UNLOCKED bootloader all tricks still now...you can your much time save using this thread... Thank again.... Sorry for my broken english...,
Click to expand...
Click to collapse
Are you confirming that this also works on Kenzo device?
thank you very much work very well with my kate
Yes i'm confirmed because i tested...
dustmalik said:
Are you confirming that this also works on Kenzo device?
Click to expand...
Click to collapse
Yes i confirmed this trick is working on kenzo device and i confirmed this trick also work both type rom lattest kenzo global developer rom(i tested 7.2.24), and kenzo global stable rom(i tested 8.1.1)
Thanks for confirming that this guide also work on kenzo devices.
I edited the thread title and the guide. I added the kenzo variant to the tutorial.
Works for all versions of miui?
I mean long ago i unlocked bootloader unofficial way by flashing emmc file but that method was for miui7.
Please little explanation what it actually it is.
Jaskirat singh said:
Works for all versions of miui?
I mean long ago i unlocked bootloader unofficial way by flashing emmc file but that method was for miui7.
Please little explanation what it actually it is.
Click to expand...
Click to collapse
Sorry, but I don't know. I tried it with MIUI 8 and it worked. If you try it and confirm if it works then tell me.
Amazing
Could you do it with other Redmi phone aswell, or It is very complicated?
So when I want to flash a Custom Rom like LineageOS 13 or 14
1. I just have to flash a TWRP on the Note 3 Pro and then
2. flash the ROM
3. (maybe) flash SuperSU?
Since this method of unlocking is an unofficial one does one have to flash the special TWRP when one wants to flash a MIUI based ROM?
Thx for the work.
Kizoky said:
Amazing
Could you do it with other Redmi phone aswell, or It is very complicated?
Click to expand...
Click to collapse
Maybe i can do it but then I need the firmware for the specified phone etc...
I don't really want to start projects with phones that I don't own because i need to test if it works etc... and i don't want to brick other people's phones by my own fault.
I hope you understand.
petrapas said:
Since this method of unlocking is an unofficial one does one have to flash the special TWRP when one wants to flash a MIUI based ROM?
Click to expand...
Click to collapse
Yes. You need a special TWRP if you unlocked your bootloader unofficially. For example I always use ZCX TWRP. I can flash any ROM without problem. And if I get stuck at MI logo because my bootloader relocked then I just flash the files with MiFlash and after everything works fine.
If I use this method and install any other rom now. Can I revert back and officially unlock my bootloader in the future? And also will unofficially unlocking cause any problems/hindrance to frequent ROM, Kernel flashing???( As in having to do some special step like replacing some img file everytime I flash a ROM through TWRP???)
TIA
hgaaditya said:
If I use this method and install any other rom now. Can I revert back and officially unlock my bootloader in the future? And also will unofficially unlocking cause any problems/hindrance to frequent ROM, Kernel flashing???( As in having to do some special step like replacing some img file everytime I flash a ROM through TWRP???)
TIA
Click to expand...
Click to collapse
You can easily revert back to stock with flashing an official firmware through MiFlash.
The unofficial unlock doesn't cause any problems. It's just like if you unlocked officially. Maybe you need to reflash this pack everytime you update or install a new rom... I'm not sure but you'll see it anyway.
I tried it and now my phone is hard bricked......... phone doesn't boot up, doesn't get recognized on the pc and when plug the phone in all I get is a blinking red light.... wont go into fastboot or edl mood..... can I get help or is there anything I can do to fix it????
Thanks @Heisenberg00
for newbies, like myself, there is a good guide on xda here:
https://forum.xda-developers.com/redmi-note-3/how-to/guide-redmi-note-3-available-twrps-t3406708
315phatboi said:
I tried it and now my phone is hard bricked......... phone doesn't boot up, doesn't get recognized on the pc and when plug the phone in all I get is a blinking red light.... wont go into fastboot or edl mood..... can I get help or is there anything I can do to fix it????
Click to expand...
Click to collapse
On which device you tried? (kenzo, kate?)
Press all three buttons (vol up+down +power) it will force reboot the phone and when phone reboots immediately try to boot in fastboot
315phatboi said:
I tried it and now my phone is hard bricked......... phone doesn't boot up, doesn't get recognized on the pc and when plug the phone in all I get is a blinking red light.... wont go into fastboot or edl mood..... can I get help or is there anything I can do to fix it????
Click to expand...
Click to collapse
I think you did something wrong... It's impossible to hardbrick your phone with this method if you follow my instructions... It's working sure on Redmi Note 3 Snapdragon version with MIUI 8.
ive tried everything and im getting nowhere...... only had the phone for a few days....... is there anything I can do?.... can someone help me please
First Iam say sorry for bad English, was follow this thread "https://forum.xda-developers.com/mi-a1/how-to/guide-enable-camera2-api-eis-stock-t3883017" to enable camera2 API and make gcam work. Now I need to unroot my MI A1 phone to get OTA update and lock bootloader, but Everytime I try to Complete Uninstall in Magisk manager menu, I got bootloop on my phone with Android Logo Sleep and got message "No Command". So please someone help me to fix my problem. thx
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Lappariaja said:
First Iam say sorry for bad English, was follow this thread "https://forum.xda-developers.com/mi-a1/how-to/guide-enable-camera2-api-eis-stock-t3883017" to enable camera2 API and make gcam work. Now I need to unroot my MI A1 phone to get OTA update and lock bootloader, but Everytime I try to Complete Uninstall in Magisk manager menu, I got bootloop on my phone with Android Logo Sleep and got message "No Command". So please someone help me to fix my problem. thx
Click to expand...
Click to collapse
You lost the stock boot image or magical did. Just google boot loop after uninstall magisk.
WhatzIt2Ya said:
You lost the stock boot image or magical did. Just google boot loop after uninstall magisk.
Click to expand...
Click to collapse
I was, and they are say to flashed original boot.img extracted from stock image zip file, but this become new problem, cause I don't know how and where to get it. Iam so sorry I really noob for this situation. Anyone can give me that stuff and tell me how to flash it, Iam scare brick my phone. ??
Lappariaja said:
I was, and they are say to flashed original boot.img extracted from stock image zip file, but this become new problem, cause I don't know how and where to get it. Iam so sorry I really noob for this situation. Anyone can give me that stuff and tell me how to flash it, Iam scare brick my phone.
Click to expand...
Click to collapse
Follow this tutorial - https://www.google.co.in/amp/s/foru...g-mi-a1-android-oreo-completely-t3731559/amp/
Follow from step 3.
Search for the boot.img file of your android version on google.
Stealtherthreat said:
Follow this tutorial - https://www.google.co.in/amp/s/foru...g-mi-a1-android-oreo-completely-t3731559/amp/
Follow from step 3.
Search for the boot.img file of your android version on google.
Click to expand...
Click to collapse
Ok thx bro, I will search boot.img MI A1 for Android Pie December first and than follow that's tutorial on thread. I hope I can fix my problem, thx.
Lappariaja said:
Ok thx bro, I will search boot.img MI A1 for Android Pie December first and than follow that's tutorial on thread. I hope I can fix my problem, thx.
Click to expand...
Click to collapse
Here is the stock boot image for December Pie update - http://s000.tinyupload.com/index.php?file_id=86684559827511992039
Stealtherthreat said:
Here is the stock boot image for December Pie update - http://s000.tinyupload.com/index.php?file_id=86684559827511992039
Click to expand...
Click to collapse
ty very much. ???
Lappariaja said:
ty very much.
Click to expand...
Click to collapse
If you uninstall this via TWRP, this still happen?
GabiML said:
If you uninstall this via TWRP, this still happen?
Click to expand...
Click to collapse
i didnt try cause was follow thread to uninstall magisk via magisk manager, and iam not sure i have twrp, maybe it was using temporary twrp to install magisk disk.
Thanks to all for help me, now my phone is going back normal with lock bootloader. BTW I was try enable camera2 API before lock bootloader with result on camera2 probe like picture bellow, is it success or not ? Thx
Lappariaja said:
Thanks to all for help me, now my phone is going back normal with lock bootloader. BTW I was try enable camera2 API before lock bootloader with result on camera2 probe like picture bellow, is it success or not ? Thx
Click to expand...
Click to collapse
Try using google camera with hdr+.
If it works then it is enabled successfully, although the screenshot looks normal to me(it is enabled).
Lappariaja said:
Thanks to all for help me, now my phone is going back normal with lock bootloader. BTW I was try enable camera2 API before lock bootloader with result on camera2 probe like picture bellow, is it success or not ? Thx
Click to expand...
Click to collapse
If I understand correctly, you enabled hal3 and eis with unlocked bootloader, then relocking it. If so, then that's a success.
WhatzIt2Ya said:
If I understand correctly, you enabled hal3 and eis with unlocked bootloader, then relocking it. If so, then that's a success.
Click to expand...
Click to collapse
Exactly that i want to do before iam in this situation, now iam happy, my phone is back normal and i can use Gcam. But still looking for good gcam, i'll try download few and test it. Thx to all for help me.
can't do anything
i reboot it go into fastboot
but then what ?? what i do ??
Please help
thanks
What did you do? What were you trying to do before this happend? Installing a ROM, etc?
I would likely use the Fastboot ROMs at this point. (link)
What did you do? What were you trying to do before this happend? Installing a ROM, etc?
I would likely use the Fastboot ROMs at this point. (link)
OhioYJ said:
What did you do? What were you trying to do before this happend? Installing a ROM, etc?
I would likely use the Fastboot ROMs at this point. (link)
Click to expand...
Click to collapse
i don't know what happen i tried to install rom it was o2 beta
how can i go to the global one where it has everything
i was trying to update it while keeping my root but i did something stupid i rebooted the device before it finishs, so it happened
now i am trying to go back to the global rom stock i can't
thanks a lot
OhioYJ said:
What did you do? What were you trying to do before this happend? Installing a ROM, etc?
I would likely use the Fastboot ROMs at this point. (link)
Click to expand...
Click to collapse
now my system on
op6t_O2_Beta_33
bulid number : A6013_41_200103
i want to go to the global one where all languages
how can I do it ?
Truly i have no idea what I've done but when I install the new system it shows like this some languages not recognize
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
yahaa08 said:
Truly i have no idea what I've done but when I install the new system it shows like this some languages not recognize
Click to expand...
Click to collapse
seems like reserve.img partition is not properly flashed.
do u use fastboot or recovery? i think this problem occur if you using recovery.
if root, you can flash reserve.img in magisk, font will fixed
lockmunk said:
seems like reserve.img partition is not properly flashed.
do u use fastboot or recovery? i think this problem occur if you using recovery.
if root, you can flash reserve.img in magisk, font will fixed
Click to expand...
Click to collapse
the problem is i have no idea what's I am doing :laugh:
now I installed the last 10.3.1 ox
but still no Arabic language
now I am trying to root it again
yahaa08 said:
the problem is i have no idea what's I am doing :laugh:
now I installed the last 10.3.1 ox
but still no Arabic language
now I am trying to root it again
Click to expand...
Click to collapse
i use this file to flash in magisk
https://androidfilehost.com/?fid=1899786940962618515
yahaa08 said:
the problem is i have no idea what's I am doing :laugh:
now I installed the last 10.3.1 ox
but still no Arabic language
now I am trying to root it again
Click to expand...
Click to collapse
Reflash your OOS ROM with 'local update' feature, like if it was a regular ROM update.
It will restore all those partitions needed for language and emji's
Best to do that than flash an .img file found on the net
Use the Man download tool, just read instructions and you'll be fine, worked for me several times. It's in the Guides forum.
Striatum_bdr said:
Reflash your OOS ROM with 'local update' feature, like if it was a regular ROM update.
It will restore all those partitions needed for language and emji's
Best to do that than flash an .img file found on the net
Click to expand...
Click to collapse
pandollar said:
Use the Man download tool, just read instructions and you'll be fine, worked for me several times. It's in the Guides forum.
Click to expand...
Click to collapse
thanks a lot, I didn't know that Android is kinda complicated
the original ROM that comes with the phone where can I download it? ( i looked the op site couldn't find it ) because I've download one it was for O2 UK
I don't understand yet, maybe i am more an IOS guy.
I want to format it and restore to the original rom came with the device.
Like I said, use Msm download tool. It will install global ROM and also format to new, and after that you can update.
pandollar said:
Like I said, use Msm download tool. It will install global ROM and also format to new, and after that you can update.
Click to expand...
Click to collapse
could you please provide the link so i can download it?
i couldn't find the tool it refers me to Microsoft tool.
thanks a lot
Here you go
https://forum.xda-developers.com/oneplus-6t/how-to/tool-6t-msmdownloadtool-v4-0-oos-9-0-5-t3867448
pandollar said:
Here you go
https://forum.xda-developers.com/oneplus-6t/how-to/tool-6t-msmdownloadtool-v4-0-oos-9-0-5-t3867448
Click to expand...
Click to collapse
thanks a lot but i think the link is something wrong with it
the 1st one too long on searching
Download
6T_MsmDownloadTool_v4.0.59_OOS_v9.0.13.rar
for the OnePlus OnePlus 6T, by iaTa
Standby...
Searching for mirrors...
the drive
Download
QUD.WIN.1.1 Installer-10037.3 Setup.zip
for the OnePlus OnePlus 6T, by Dark Nightmare
OOPS!
no mirrors found.
Sorry, not sure what you mean. Just download the 1st zip file, works fine just tried it.
pandollar said:
Sorry, not sure what you mean. Just download the 1st zip file, works fine just tried it.
Click to expand...
Click to collapse
i meant the links are down deleted i guess :good:
Downloads fine for me, not sure what your problem is.
pandollar said:
Downloads fine for me, not sure what your problem is.
Click to expand...
Click to collapse
Really !when i saw you'r comment i've tried and it's working :fingers-crossed::good:
before i think the links were down or something wrong with it.
thanks i've download the 1st one
and the driver
so i just connect it and run it ? simple as that ?