Database Users

Huawei P8 Lite firmware is damaged! Need hrlp, please!

Hanging firmly in rescue mode .
Had tried the Stockrecovery.img to flash .
When I hold the volume keys and the on-off button is pressed , then comes this message :
Error!
Func NO : 11 ( recovery image )
Func NO: 2 (load failed)

U probably need to flash a new recovery via ADB
Then u should be fine

Ok, can you send me the commands for adb, please?

Huawei P8 B151 stuck in Rescue Mode loop.

hi, was trying to uninstall SuperSu and got stuck in Rescue mode Loop,
Phone is Huawei P8, GRA-L09, B151, EMUI 3.1
error message is as follows:
Error!
Func NO : 10 (boot image)
Error NO : 2 (load failed!)
read a page to do a factory reset which ended up formatting my internal storage and still didn't help me.
TWRP can still be accessed when(Vol Up + Power Button are held)
Please help me:crying:

Tried fastboot flash boot boot.img? (Where boot.img is your original boot.img backup you took before rooting etc)
Sent from my HUAWEI GRA-L09

Another P10 Plus Bricked after Oreo.

Hello guys,
ive been trying since friday to Downgrade from Oreo to Nougat, in the proces my phone got bricked.
ive followed this steps:
https://forum.xda-developers.com/p10/help/oreo-boot-image-bricked-t3744809
https://forum.xda-developers.com/p10/how-to/guide-to-rollback-huawei-p10-oreo-to-t3735156
https://forum.xda-developers.com/p10-plus/help/help-p10-bricked-t3754984
(reference) https://forum.xda-developers.com/mate-9/how-to/guide-mate-9-flash-oreo-update-package-t3699522
I use the VKY-L29C432B185 firmware for rollback, adding it to the HWOTA8 folder in my sdcard, after flashing, the phone stays in error:
Error!
Func NO : 10 (boot image)
Error No : 2 (load failed)
if i tried to go to recovery via vol Up + power then got
Func No : 11 ( recovery image)
Error No: 2 ( load failed)
After this, ive unzipped and unpacked the update.app from oreo, and install ramdisk.img, recovery_ramdisk.img and kernel.img and the error dissapears, after that i install again twrp and try. but no success.
I can access to Fastboot, and i can flash via fastboot twrp and stock recovery (via fastboot flash recovery_ramdisk imgfile.img),
Has anyone faced this problem as well?

Oh my god! i think that ive fixed the phone! here is what ive done so far:
First of all, i was stuck in Error mode:
Error!
Func NO : 10 (boot image)
Error No : 2 (load failed)
if i tried to go to recovery via vol Up + power then got
Func No : 11 ( recovery image)
Error No: 2 ( load failed)
In order to clean that up, you have to unpack an update.app from oreo, flash kernel.img and recovery_ramdisk.img
From this, you can access to the stock recovery, also you can flash twrp and boot from it again.
After completing this, here is the fun part:
1. Download Oreo Again VKY-L29C432B360 and rename the files (you know.)
2.Using HWOTA8, copy the files from VKY-L29C432B360 to HWOTA8 on a SDCard, with hwota8_update.zip and MHA_RECOVERY8_NoCheck.img and insert it to the phone
3. Install TWRP using the Replace_Recovery.bat
4. Boot from TWRP, and install zip hwota8_update.zip.
5. The phone will reboot and show the same error Func No : 11 ( recovery image) DONT PANIC.
6. Power off the phone, and quickly press the Vol - button and plug the usb cable to enter fastboot.
7. Flash the recovery found in HWOTA8 file from your pc: fastboot flash recovery_ramdisk MHA_RECOVERY8_NoCheck.img.
8. Power Off your device, and quickly boot to Recovery (the stock one, that we just flashed)
9. The install process (Started in TWRP) WILL CONTINUE!!!.
10. Your phone boots again in android Oreo B360 (but with locked bootloader in my case)
I hope it helps! i almost purshase the unbrick from FunkyHuawei... $50.00!
Greetings!

Bricked P10 Lite, Please help

Hello guys.
I tried to update my P10 lite with dload method, the update started and finished normal.
When the phone restarted it entered in error mode.
Code:
ERROR MODE
Attention!
Please update system again
Error!
Func NO: 11(recovery image)
Error NO: 2(load failed)
I can enter in fastboot but not in erecovery.
WAS-LX1A
Firmware : WAS-LX1AC432B123
Bootloader: Locked (i don't have the key)
Any idea ?

nickxab said:
Hello guys.
I tried to update my P10 lite with dload method, the update started and finished normal.
When the phone restarted it entered in error mode.
Code:
ERROR MODE
Attention!
Please update system again
Error!
Func NO: 11(recovery image)
Error NO: 2(load failed)
I can enter in fastboot but not in erecovery.
WAS-LX1A
Firmware : WAS-LX1AC432B123
Bootloader: Locked (i don't have the key)
Any idea ?
Click to expand...
Click to collapse
I suggest you to use the HWOTA8 method, you might unlock the bootloader.

nickxab said:
Hello guys.
I tried to update my P10 lite with dload method, the update started and finished normal.
When the phone restarted it entered in error mode.
Code:
ERROR MODE
Attention!
Please update system again
Error!
Func NO: 11(recovery image)
Error NO: 2(load failed)
I can enter in fastboot but not in erecovery.
WAS-LX1A
Firmware : WAS-LX1AC432B123
Bootloader: Locked (i don't have the key)
Any idea ?
Click to expand...
Click to collapse
If u don't have bootloader code u can't unlock it for free...

HELP! Hardbricked p10 lite after dload update

Apparently I played way too much with my p10 lite and managed to get it bricked very badly... I can't get to any kind of recovery mode, erecovery, update menu for dload, I can only get to fastboot mode, when I try to boot into the rom or into recovery I get "error mode func 2 and func 11".
My bootloader and FRP are UNLOCKED.
When I try flashing any recovery (twrp or stock) through fastboot it gives "remote: partition length get error"
How can I unbrick the phone since I don't have the option to use dload?

Hello! same here!
anybody help plz?

Mcgreygor said:
Hello! same here!
anybody help plz?
Click to expand...
Click to collapse
Hi...
[email protected] other Thread for answer
solong
speedson

angushev20 said:
Apparently I played way too much with my p10 lite and managed to get it bricked very badly... I can't get to any kind of recovery mode, erecovery, update menu for dload, I can only get to fastboot mode, when I try to boot into the rom or into recovery I get "error mode func 2 and func 11".
My bootloader and FRP are UNLOCKED.
When I try flashing any recovery (twrp or stock) through fastboot it gives "remote: partition length get error"
How can I unbrick the phone since I don't have the option to use dload?
Click to expand...
Click to collapse
hey man, we are working on this thread now!
P10 Lite Hardbrick (can't dload, erecovery, flash recovery,etc...)
Hello guys! i have the same problem as this guy here: https://forum.xda-developers.com/t/help-hardbricked-p10-lite-after-dload-update.4191821/ LET'S BEGIN OUR JOURNEY: i follow this guide succesfully...
forum.xda-developers.com
if you need it!