Hanging firmly in rescue mode .
Had tried the Stockrecovery.img to flash .
When I hold the volume keys and the on-off button is pressed , then comes this message :
Error!
Func NO : 11 ( recovery image )
Func NO: 2 (load failed)
U probably need to flash a new recovery via ADB
Then u should be fine
Ok, can you send me the commands for adb, please?
Related
Huawei p8 GRA-L09
Unlocked
I got an error
Attetion!
Please update system again
Error
Func NO : 11 (recovery image)
Error NO : 2 (load failed! )
volume + and - power button wn't work i already treid many times
and other combinations
sorry for bad english!
hi, was trying to uninstall SuperSu and got stuck in Rescue mode Loop,
Phone is Huawei P8, GRA-L09, B151, EMUI 3.1
error message is as follows:
Error!
Func NO : 10 (boot image)
Error NO : 2 (load failed!)
read a page to do a factory reset which ended up formatting my internal storage and still didn't help me.
TWRP can still be accessed when(Vol Up + Power Button are held)
Please help me:crying:
Tried fastboot flash boot boot.img? (Where boot.img is your original boot.img backup you took before rooting etc)
Sent from my HUAWEI GRA-L09
my phone boot only in this screen mode http://imgur.com/a/rMcO7. this is not my pic but error is: error mode attention. please update system again. error. func no 14 (iom3 image) error no: 1 (security verify failed).
What can I do to revive my phone. not working fastboot, bootloader, dload method to force flash of rom ecc... THx
I've similar situation..i'm not able to flash any kind of image..
Wire1122 said:
my phone boot only in this screen mode http://imgur.com/a/rMcO7. this is not my pic but error is: error mode attention. please update system again. error. func no 14 (iom3 image) error no: 1 (security verify failed).
What can I do to revive my phone. not working fastboot, bootloader, dload method to force flash of rom ecc... THx
Click to expand...
Click to collapse
Friend, if you want to re-cover phone, do this steps.
1. Connect your phone to PC and fast press volume down and power button (phone needs to be off)
2. You will be now on Bootloader & rescue mode.
Now you search for mega Thread and there will be unbricking section! UW!
RootingPro-18 said:
Friend, if you want to re-cover phone, do this steps.
1. Connect your phone to PC and fast press volume down and power button (phone needs to be off)
2. You will be now on Bootloader & rescue mode.
Now you search for mega Thread and there will be unbricking section! UW!
Click to expand...
Click to collapse
Thancks, but my phone is already in huawei assistance.
Hello guys,
ive been trying since friday to Downgrade from Oreo to Nougat, in the proces my phone got bricked.
ive followed this steps:
https://forum.xda-developers.com/p10/help/oreo-boot-image-bricked-t3744809
https://forum.xda-developers.com/p10/how-to/guide-to-rollback-huawei-p10-oreo-to-t3735156
https://forum.xda-developers.com/p10-plus/help/help-p10-bricked-t3754984
(reference) https://forum.xda-developers.com/mate-9/how-to/guide-mate-9-flash-oreo-update-package-t3699522
I use the VKY-L29C432B185 firmware for rollback, adding it to the HWOTA8 folder in my sdcard, after flashing, the phone stays in error:
Error!
Func NO : 10 (boot image)
Error No : 2 (load failed)
if i tried to go to recovery via vol Up + power then got
Func No : 11 ( recovery image)
Error No: 2 ( load failed)
After this, ive unzipped and unpacked the update.app from oreo, and install ramdisk.img, recovery_ramdisk.img and kernel.img and the error dissapears, after that i install again twrp and try. but no success.
I can access to Fastboot, and i can flash via fastboot twrp and stock recovery (via fastboot flash recovery_ramdisk imgfile.img),
Has anyone faced this problem as well?
Oh my god! i think that ive fixed the phone! here is what ive done so far:
First of all, i was stuck in Error mode:
Error!
Func NO : 10 (boot image)
Error No : 2 (load failed)
if i tried to go to recovery via vol Up + power then got
Func No : 11 ( recovery image)
Error No: 2 ( load failed)
In order to clean that up, you have to unpack an update.app from oreo, flash kernel.img and recovery_ramdisk.img
From this, you can access to the stock recovery, also you can flash twrp and boot from it again.
After completing this, here is the fun part:
1. Download Oreo Again VKY-L29C432B360 and rename the files (you know.)
2.Using HWOTA8, copy the files from VKY-L29C432B360 to HWOTA8 on a SDCard, with hwota8_update.zip and MHA_RECOVERY8_NoCheck.img and insert it to the phone
3. Install TWRP using the Replace_Recovery.bat
4. Boot from TWRP, and install zip hwota8_update.zip.
5. The phone will reboot and show the same error Func No : 11 ( recovery image) DONT PANIC.
6. Power off the phone, and quickly press the Vol - button and plug the usb cable to enter fastboot.
7. Flash the recovery found in HWOTA8 file from your pc: fastboot flash recovery_ramdisk MHA_RECOVERY8_NoCheck.img.
8. Power Off your device, and quickly boot to Recovery (the stock one, that we just flashed)
9. The install process (Started in TWRP) WILL CONTINUE!!!.
10. Your phone boots again in android Oreo B360 (but with locked bootloader in my case)
I hope it helps! i almost purshase the unbrick from FunkyHuawei... $50.00!
Greetings!
Hi. Today i finded my old Huawei P8 Lite and wifi not work.
When i try to HARD RESET by Volume UP + POWER error load:
"Rescue MODE
Attention
Please update system again
Error!
Func NO : 10 (boot image)
Error No : 1 (security verify fails!)"
How can i update my phone ? ?