Hello M.F.s(Mix Fans)
I've been using the latest Marsmallow based Epic rom for a long time, which is quite enough to be having beloved Xposed. So call it boredom or BS, I've managed to get Dual-boot patcher work on my mix although figuring it out was a PITA. Before you think like 'Mayte wot the fooh is Dual boot ey?' >>here<< is it's site that you can getcho arse up and take a quick look and download the
>> Dual boot patcher APK( Working one for me is 9.2.0.r230.g2a0b58a9 Fri, 14 Jul 2017 21:12:40 -0400, latest one FC's)
>> Dual boot Utilities ZIP(To be able to switch roms through TWRP)
NOTE: So before you doing anything crazy like trying this app, you must know:
>>>>Your device must be Decrypted. If it's encrypted, not even a single fuğk for you today.
>>>> Take the responsibility of doing this kind of sh1t. I am nobody.
>>Here<< is the original thread that you can read(I know you won't) and smash the thanks buttons(you won't too) of the beloved developer if you feel like. Either way I'm gonna show how i get it done:
Launch the DBP(Dual Boot Patcher) APK, give the Root acces and permissons,
[*]Tap to MENU button on the top left or right(Im using RTL Layout), > Select ROMs,
IMPORTANT TIP: If the app crashes when you tap ROMs; Just go Patch zip file tab and patch any zip file no matter what(a little sized zip file just to avoid crash of ROMs tab)
[*]Once you get there, it will ask for setting the Kernel, tap to SET NOW,
[*]Tap to 3 dots menu button right next to Primary rom,
[*]Tap to UPDATE RAMDISK then reboot the device,
[*] Launch the DBP again, MENU > Patch Zip File > Choose your rom zip from where you placed it,
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
[*]Change Partition configuration as DATA SLOT and type a name and tap to CONTINUE (I've tried Secondary, Multi Slot 1 etc, couldn't make it work)
[*]SAVE the patch zip somewhere, tap to CHECK/TICK button on the corner to patch it,
[*]MENU > ROMs > tap to Red FLOATING BUTTON on the bottom and select ADD PATCHED FILE > Select the zip you patched like: XXX.rom_data-slot_xxx.zip
[*] An annoying popup will ask some stuff, tap to CHANGE LOCATION > DATA SLOT, type an ID doesnt matter what,
[*] Tap to TICK, it will run an command window or some old looking arse stuff and you have to wait, DO NOT LEAVE the app until you see the script result like this:
]
[*] If you see an error, you're fk'd up Error is a new terror you know. Although it doesn't prevent you to boot; you better clean the f'n infected rom by ROMs > 3 dot button of the specific rom > WIPE ROM and select all the boxes.
[*] You can switch between the roms you patcher either in the app or flashing the Dualboot Utilities zip via TWRP.
Ps. I'll take a look at the flashing Gapps, mod zips for specific rom later on, probably easy to do. For now it's enough internet for me today.
[*]Yeah, flashed Gapps, Kernel etc by just Patching a zip file like Gapps-full.xxx_data-slot-xxx.zip which means you have to patch zip by selecting your target(Select your set ID for your rom).
NOTE: Resurrection Remix rom has got a modem verification string inside the updater-script, you can't(I couldn't) flash it until you remove that string and re-compress the rom zip as so then patch it or you already doing this multi booting process on RR rom. My primary rom is MM Epic, I succesfully booted into 8.2.4.0 Global stable and RR 0714(latest official i presume) roms, just saying.
SIDE NOTE: Can't get root to work on RR rom. The included magisk, previous versions, DX kernel, SuperSU nothing worked. What a pain in the arse.
Thanks to chenxiaolong for the app. Punch me if I have forgotten a sh1t or a credit or whatever. Peace :fingers-crossed:
best of luck in ur thread brother...keep it high
carlitobahsoun said:
best of luck in ur thread brother...keep it high
Click to expand...
Click to collapse
I feel like im trying and posting crazy stuffs which seem to be not attracting for anyone haha. Anyway, i like sharing my experiences.
Mi MIX
7.5.4 Épic
If u need some attractive picture to make ur post more... Oh damn, looks cool...
Tell me...
lesscro said:
If u need some attractive picture to make ur post more... Oh damn, looks cool...
Tell me...
Click to expand...
Click to collapse
LoL i know what you mean. I may send nukes later
Mi MIX
Epic 754/RR 0714
Mi Mix 6/256GB
Globe rom developer 7.7.15
When I tap on menu-->rom the app crashes
I've tried different versions. Same problem.
alberto8523 said:
Mi Mix 6/256GB
Globe rom developer 7.7.15
When I tap on menu-->rom the app crashes
I've tried different versions. Same problem.
Inviato dal mio MIX utilizzando Tapatalk
Click to expand...
Click to collapse
The app is being biatch most of the times. Latest version never worked on my end, always crashed. But the version i've stated in the OP, the one which also crashes sometimes, but works generally. Clean cache and data of the app, uninstall and reinstall, before launching it, give the permissions it needs from app settings. Launch it, grant root permission, if does work; follow the steps of OP. It may crash once though, close the app from recents and re-launch. There is a reason of I call it a pain in the arse lol. Hopefully works.
Mi MIX
Epic 754/RR 0714
XenonHD
I've tried all these methods, app still crashes.
I think it's depending on the base rom (Globe ROM). This rom has kernel mods and others system mods.
What's your base rom?
alberto8523 said:
I've tried all these methods, app still crashes.
I think it's depending on the base rom (Globe ROM). This rom has kernel mods and others system mods.
What's your base rom?
Click to expand...
Click to collapse
My primary is Epic 7.5.4(MM), has got some mods as yours. I see that the original thread is filled with crash reports but there is no(i didnt see) proper fix rather than using an another version but you've already tried, so.. Perhaps you can see the culprit though crash log.
Mi MIX
Epic 754/RR 0714
XenonHD
I've found a working version: 9.2.0.r37
I've flashed last resurrection remix rom: works fine, except root permissions.
Miui remains the best rom [emoji16]
alberto8523 said:
I've found a working version: 9.2.0.r37
I've flashed last resurrection remix rom: works fine, except root permissions.
Miui remains the best rom [emoji16]
Click to expand...
Click to collapse
Yeah, couldn't get root either on RR, on XenonHD. Haven't tried another one though.
Sent from my Xiaomi MIX using XDA Labs
@Konsstantine34
HI thanks for your hard work bro
can you please tell me how to delete the modem verification string?
its giving me that error again and again
Thanks for your help
darudedudedocta said:
@Konsstantine34
HI thanks for your hard work bro
can you please tell me how to delete the modem verification string?
its giving me that error again and again
Thanks for your help
Click to expand...
Click to collapse
Hi man, thanks.
Through root explorer(or Es file whatever you use) Get into your rom zip;
» META-INF » com » google » android »» Open ''updater-script'' as editable and remove second this line completely:
Code:
assert(xiaomi.verify_modem("2017-04-13") == "1");
Then save edited updater-script and re-compress rom files.
Mi MIX
Epic 754/RR 0714
XenonHD
grazie!!
@Konsstantine34
edit: sorry to sound like a noob..but I dunno how to recompress the edited updater script and rom..
thanks again for your help and patience..
I tried to google it but I didn't find any helpful links
Thnaks again
darudedudedocta said:
grazie!!
@Konsstantine34
edit: sorry to sound like a noob..but I dunno how to recompress the edited updater script and rom..
thanks again for your help and patience..
I tried to google it but I didn't find any helpful links
Thnaks again
Click to expand...
Click to collapse
I presume you're doing this on your device. Here is some visual content that may help you.
After Extracting(unzipping) remove script that mentioned before and:
Some file explorers don't need zip to be extracted, you can edit the content as you wish but, in my experience these explorers corrupt the zip. The clear way is what i just sent [emoji106]
thanks mate for going above and beyond in helping me out
darudedudedocta said:
thanks mate for going above and beyond in helping me out
Click to expand...
Click to collapse
Cheers, please let me know about it though.
thanks mate..its finally working
Konsstantine34 said:
Hi man, thanks.
Through root explorer(or Es file whatever you use) Get into your rom zip;
» META-INF » com » google » android »» Open ''updater-script'' as editable and remove second this line completely:
Code:
assert(xiaomi.verify_modem("2017-04-13") == "1");
Then save edited updater-script and re-compress rom files.
Mi MIX
Epic 754/RR 0714
XenonHD
Click to expand...
Click to collapse
Konsstantine34 said:
I presume you're doing this on your device. Here is some visual content that may help you.
View attachment 4219789
After Extracting(unzipping) remove script that mentioned before and:
View attachment 4219792
View attachment 4219794
Some file explorers don't need zip to be extracted, you can edit the content as you wish but, in my experience these explorers corrupt the zip. The clear way is what i just sent [emoji106]
Click to expand...
Click to collapse
Konsstantine34 said:
Cheers, please let me know about it though.
Click to expand...
Click to collapse
alberto8523 said:
except root permissions.
Miui remains the best rom [emoji16]
Click to expand...
Click to collapse
darudedudedocta said:
thanks mate..its finally working
Click to expand...
Click to collapse
@valerio.tosti
Hello gents, I don't like bragging like ''I was right...'' but I was
I've removed (Wiped in Dual boot patcher app) all the roms except primary(can't be removed lol).
Then clean flashed RR latest official, I have root priviledges on it(also xposed), then patched and flashed miui_MIMIXGlobal_V8.2.4.0.MAHMIDL which is not pre-rooted miui rom.
So, patched SR2-SuperSU v2.79 and flashed it too. Voila, both roms are running with root priviledges. So the key was being on clean flashed RR rom then patching multi-boot roms. Thing i may try next is xposed on both(or multiple) roms but for now i can sleep in peace lol.
Mi MIX
Epic 754/RR 0714
XenonHD
Fookin forgot to attach fookin screenshots, here are they as a fookin proof.
Related
[MODS][CM9]Optimus 4X LockScreen, Recent Apps, Softkeys & Battery on Status Bar, etc.
Ok, so here is the deal, I have been looking for stuff to mod the last Hehappy ROM (Lastkiss) and found all of these things working for our phone (They SHOULD work on Neko's IcySnap ROM as well), everyone of them has been tested by me on the LG Optimus One P500:
NOTE ABOUT THIS ONE (LG Optimus 4x Lock Screen) :
It does unlock the screen but you have to tap in the center of the screen and SLOWLY (as in very careful and slowly) drag your finger all the way to your upper right corner. (not really worth it)
[MOD] [CM9] LG Optimus 4x Lock Screen
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Working on CM9 only!
Without transparent!
Installation:
Flash *.zip from recovery
Wipe dalvik
Reboot
Tested and working on:
Quote:
Sony Xperia P
Sony Xperia U
Sony Xperia Go (Need testing)
Sony Xperia Sola (Need testing)
__________________________________________________________________________________________________________
[MOD][CM9] Soft Keys and Battery Line
there is no option to enable / disable buttons or the battery line, they are on by default and can not be configured
make sure you back up your SystemUI so you can go back to the original if you don't like this one
Click to expand...
Click to collapse
Soft Keys ONLY
__________________________________________________________________________________________________________
[mod][cm9 ivendor rc5][update] jelly bean status bar
because I have problems with the Jelly Bean status bars, I've created my own.
this only works with CM9 Ivendor rc 5 other roms have not been tested.
this is my first mod and not stone me if something does not work
Installation:
- Make a Backup of your rom
- Flash this zip with cwm
- go to advanced/ fix permisions
- Reboot and have fun
Click to expand...
Click to collapse
__________________________________________________________________________________________________________
Note about this one:
It also changes the DPI of the NAVIGATION BAR, you can see it on the screenshoot I took on my phone.
WINDOWS TASK SWITCHER MOD FOR CM-9 ICS
Hey guys..
As the name of the thread reads, I have modded the recent's task switcher in ICS/CM9 to be a look-alike of Windows UI
FEATURES
1. Swipe to kill by flinging your finger up
2. Swipe to kill by flinging you finger down
3. Horizontal task switching
4. And of-course a cool new interface
CREDITS
EvilSto
Jellaxy Team
Yackovsy
XDA
Samsung
Google
and ME
Click to expand...
Click to collapse
__________________________________________________________________________________________________________
[MODS][CM9 RC2] Windows style task switcher+Center Lockscreen clock+smoothscroll mod
Thanks to wayland for his CM9 RC2.
Thanks to evilisto for his guide of windows style task switcher
Thanks to AndroidON for his guide of smoothscroll mod
Thanks to King ACE,Ace king 34,and -RDR- for testing.
Feel free to notify in case I forgot to add your name here
users please report bugs if any
If you like my work then take a potato and worship it
Click to expand...
Click to collapse
__________________________________________________________________________________________________________
[MOD] CM9 Increased System Volumes
I just flashed CM9 Alpha 11 by dhiru1602 and noticed that the Touch Sound, Lock Sound and Unlock Sound was too quiet and not noticeable. So I have increased their volume and is available for anyone to try!
Downloads :
Effect_Tick.ogg
Lock.ogg
Unlock.ogg
If you want to flash this MOD from CWM, download this zip file:
Increase Volume (Credits: frapeti)
NOTE:
Take a backup of the files you are going to replace before continuing. If you don't like the new modded audio files, you can always revert back to the original one's!
Instructions
Manually Replacing:
1. Using Root Explorer, go into System/Media/Audio/UI and take a backup of the original audio files you want to replace.
2. Replace the original file with the downloaded one.
3. Change the permission to "RW-R--R--".
Flashing Through CWM:
1. Go into recovery mode.
2. Select "Install zip from sdcard"
3. Navigate to the folder where you saved the flashable .zip file and select it.
4. Flash it!
Reboot your phone and the volume will be increased!
Click to expand...
Click to collapse
__________________________________________________________________________________________________________
Default [MOD][CM9]Multitasking mod / app switcher for cm9 Pico mdpi
Thanks to evilisto, I was able to mod and compile a multitasking/app switcher mod for cm9 HTC Explorer/pico (mdpi) that looks a lot more pretty. (see attachment)
v1 Features:
Dark grey backgroud.
Horizontal navigation between apps.
Swipe up or down to kill app.
Large, beautiful looking thumbnail.
v1a Features:
Same as v1 but changed background to give windows mobile look (looks much prettier).
v2 Features (Sense 4 Multitasking - what's different):
Added code to generate gradient in background.
Added title Recent Apps.
Added thumbnail Reflection.
Added display of icons above the app title.
Added tilt/rotate to thumbnail.
Note: Some people have asked me how to enable landscape view. Landscape view will work only if you are already in an app which is in landscape mode when launching app switcher or if in landscape mode in your launcher (if enabled). This will work for v1, v1a and v2 and all future versions as well.
Click to expand...
Click to collapse
__________________________________________________________________________________________________________
I also uploaded TWO uninstallers, one for hehappy's ROM and one for neko95 ROM, the uninstallers include the original "systemui.apk", "framework-res.apk", "framework.jar", "services.jar", "lock.ogg", "unlock.ogg" and "Effect_Tick.ogg" from each ROM and it will revert every mod you have flashed involving the above files. (Use in case of bootloop or in case you want to use a different mod)
How to install the mods? Download file, boot into recovery, flash the file, wipe dalvik-cache and reboot.
How can I find time to search, test and make dumb threads like this one? I'm unemployed! ._. !!
Have fun.
Click to expand...
Click to collapse
Goodies! Too bad I am on AOKP so the lockscreen I have been waiting for is not supported on this ROM.
--
P>
Sent from my LG-P500 using xda app-developers app
don´t work on oxygen ics rom
Nope, IIRC Oxygen ROM isn't compiled from the same sources as Hehappy's.
These mods should work on:
Hehappy's Lastkiss CM9
Neko's IcySnap CM9
JedduRocks WhiteHawk CM9 (It's hehappy's ROM with some scripts inside)
Xperia ICS V2 CM9 (It's a themed hehappy's ROM)
zeratos said:
Nope, IIRC Oxygen ROM isn't compiled from the same sources as Hehappy's.
These mods should work on:
Hehappy's Lastkiss CM9
Neko's IcySnap CM9
JedduRocks WhiteHawk CM9 (It's hehappy's ROM with some scripts inside)
Xperia ICS V2 CM9 (It's a themed hehappy's ROM)
Click to expand...
Click to collapse
Right, but it may brake the icysnap theme
Sent from my LG-P500 using xda premium
FPChaim said:
Right, but it may brake the icysnap theme
Sent from my LG-P500 using xda premium
Click to expand...
Click to collapse
Well, you could always try and let us know, the original files for IcySnap latest update are on the IcySnap uninstaller if you face any problem.
Note: I didn't faced any theme related problems while I tested all the mods, no problem at all to be honest.
zeratos said:
Well, you could always try and let us know, the original files for IcySnap latest update are on the IcySnap uninstaller if you face any problem.
Note: I didn't faced any theme related problems while I tested all the mods, no problem at all to be honest.
Click to expand...
Click to collapse
Well, I'm on cyan mobile righ now, I'm just saying that because this happened to my mod and I had to do one separated version for gingersnap
Sent from my LG-P500 using xda premium
zeratos said:
Well, you could always try and let us know, the original files for IcySnap latest update are on the IcySnap uninstaller if you face any problem.
Note: I didn't faced any theme related problems while I tested all the mods, no problem at all to be honest.
Click to expand...
Click to collapse
Wow soft keys in statusbar, it is tempting enough for me to switch to CM9 and test, great work, thanks!
Sent from my LG-P500 using xda premium
could the people who downloaded the 4x lock screen report back so people can know if it is working fine? D:
zeratos said:
could the people who downloaded the 4x lock screen report back so people can know if it is working fine? D:
Click to expand...
Click to collapse
Tested it, i can't unlock the phone
hrm... that sucks, maybe someone can send it to neko95, he wanted to port it or something IIRC ._.
zeratos said:
hrm... that sucks, maybe someone can send it to neko95, he wanted to port it or something IIRC ._.
Click to expand...
Click to collapse
Looks like he already has:
http://forum.xda-developers.com/showpost.php?p=34296746&postcount=5342
zeratos said:
hrm... that sucks, maybe someone can send it to neko95, he wanted to port it or something IIRC ._.
Click to expand...
Click to collapse
> Already did
Ah, that's awesome , are you going to add the blackberry unlock too? Or just that one?
Btw, I was messing with the lock screen and IT DOES UNLOCK THE SCREEN you just have to slowly drag it to your upper right corner.
zeratos said:
Ah, that's awesome , are you going to add the blackberry unlock too? Or just that one?
Btw, I was messing with the lock screen and IT DOES UNLOCK THE SCREEN you just have to slowly drag it to your upper right corner.
Click to expand...
Click to collapse
Can you do softkeys only without battery line as in original thread? It would be nice.
I tried lg 4x lock screen but it's not optimized for our screen size this is the reason why it doesn't work now
Sent from my LG-P500 using Tapatalk 2
myawan said:
Can you do softkeys only without battery line as in original thread? It would be nice.
Click to expand...
Click to collapse
Already did, the link is on the main post.
zeratos said:
Already did, the link is on the main post.
Click to expand...
Click to collapse
Thanks, is it working with GenetICS? Can we have home key instead of menu?
Sent from my LG-P500 using xda premium
myawan said:
Thanks, is it working with GenetICS? Can we have home key instead of menu?
Sent from my LG-P500 using xda premium
Click to expand...
Click to collapse
No, none of these mods work on hehappy's last update (GenetICS).
Unless the developer of the mod shares the method to implement the keys it can't be done, sorry.
tapatalk said:
:thumbup::thumbup:
:beer::beer:
Sent from my GT-P3110 using Tapatalk HD
Click to expand...
Click to collapse
What? D:
I things its working just try.make backup first.
Hi everybody,
First of all, thanks to all the dev who have work in amount of me. All the gratifications go them.(but Thanks are welcome, and critics too, and also you can rate and/or vote poll) And sorry for bad english.
First thanks to :
OldDroid for his awesome PAC-ROM and Paranoid Android, psndna88 for his awesome PSN, Rashed97 for his lightweight Gapps, all Xda for tuto I found to help me, and all of you who support me (even those who don't but give me some constructive reasons )
In the second post, you'll find MuSPaH : Slim PA with sd-ext script implement : PSN Kernel Patcher.
H is for the awesome feature Halo.
In the third post, you'll find MuSPaC : Slim PAC with sd-ext script implement : PSN Kernel Patcher.
Here you'll find a Slim PAC version. Like this from OldDroid, you'll find ParanoidAndroid , Aokp, and CyanogenMod in one Rom. But more light.
If I can make some suggestions :
for those who want to have more PIE options take a look at LMT Launcher
Waze is a very good alternative to Google Maps
Here you'll find a little app named Divider... Cool to help you to seperate widgets, apps, on your homescreen. See screenshot.
Floating touch : a button floating on your screen over other apps, and you can move it anywhere. You can put a photo as button.
14 inverted G-APPS
Camera Ace : transform mobile phone photography into something more meaningful.
Theme your Ace with this awesome Hue theme
, there's a color for all of you and he purpose also another themes.
MuSPaC Bootanimation
You'll find all my work in my signature.
You will test with the latest release Android camera and gallery from android 4.3, and in MuSPaH you'll have the taste of GoogleNow with widget running.
There's also a UltraSlim S-PAC : no launcher, no keyboard, no browser, etc. The base is PAC, the rest to customize . The goal : YOUR ACE LIKE YOU
So, there's no launcher, no browser, no music app, no calc... To let you choose the "best" for you. ContactProvider is the same as in S-PAC.
For the first use you have 2 solutions :
- open the zip file with Winrar or another, then put in system/app, the apk of a launcher you already have ;
- or once you'll have flashed Gapps, you'll have a notification to update SuperSu on Playstore. Click on, and during the update, chose a launcher on Playstore.
Two easy ways, don't worry.
After that, just enjoy...
Maybe there's some question about PAC-Rom that you'll find an answer on development thread. Idem for Paranoid Android. But do not disturb his development with question which have there answers here in the general section. Use that last link if not an ask directly linked to development, or use my thread. I'll try to help you at the best I'll can. Or you can can help you maybe
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
MuSPaH
Here you find a ParanoidAndroid Rom by OldDroid, moded by me.
MuSPaH is The Mukiai Style on th PA with Halo. And sure, on the same work from my halo.
Pre Install :
To be useable, you'll need a little work before : take your sd-card and your PC.
On PC open Minitool Partition Wizard and create 2 partitions on your sdcard : first a ext4 (only ext4 if you want it works , second as a swap partition. Mines are 1000mb for ext4 and 128mb for swap if it can help somebody. For those who not know how to make it , use this guide, and all will be good.
That's all.
Then Install :
> Copy MuSPaH v1 on the root of your sd-card
> Wipe data / cache / dalvik cache
> Format /system
>>>>>>>>>> Flash the Rom.
> Wipe cache & dalvik cache
>>> Reboot
Installation is little bit longer, like bootime, but it's for good cause
The first use may be a little laggy, so take your time without be angry, put all your settings (like disable boot animation,.... ), then reboot. I suggest to reboot once again after. And now? ENJOY
__________________________________________________ __________________________________________________ ______
changelog:
Initial release : it's the first taste, Do not forget to go on OldDroid page to give him a thanks for his awesome work, please
then my touch with sd-ext soution with PSN kernel patcher (please give him a thanks too)
slimmed by me
last version of camera and gallery said from android 4.3 : WORKING
one of the last version of google now with widget : WORKING
some other google app with lib
some tweaks to help battery, smothness, etc
MuSPaC
So here , my little jewel I think.
In one flashable zip, you'll have SlimPAC, light Gapps, and sdext. We can thanks a lot pnadna88 for his awesome work (take a look at here), and give him a thank.
Pre Install :
To be useable, you'll need a little work before : take your sd-card and your PC.
On PC open Minitool Partition Wizard and create 2 partitions on your sdcard : first a ext4 (only ext4 if you want it works , second as a swap partition. Mines are 1000mb for ext4 and 128mb for swap if it can help somebody. For those who not know how to make it , use this guide, and all will be good.
That's all.
Then Install :
> Copy MuSPaC v2.5 or v2.6 on the root of your sd-card
> Wipe data / cache / dalvik cache
> Format /system
>>>>>>>>>> Flash the Rom.
> Wipe cache & dalvik cache
>>> Reboot
Installation is little bit longer, like bootime, but it's for good cause
The first use may be a little laggy, so take your time without be angry, put all your settings (like disable boot animation,.... ), then reboot. I suggest to reboot once again after. And now? ENJOY
On PAC thread from OldDroid, you'll find PAC changelog.
There's also a general thread. With this two pages, you'll find all answers for PacRom based. But but at my point of view, there's only two missings (whiwh are known, and work in progress, so don't disturb PacTeam with that) : Tiles adding and Aokp weather. For all the rest, it's pretty useful, I think a daily use. But tell me what you're tinking of.
DO NOT FORGET : IF YOU PRESS THANKS FOR ME , PLEASE PRESS THANKS ON THE DEV THREADS!!! Without them, nothing possible.
MuSPaC bootanimation
__________________________________________________ __________________________________________________ ______
changelog :
14.07.2013 : v2.6 = v2.5 + some new txeaks for battery, speed, smoothness
14.07.2013 : v2.5 = really, it was an update from the end of april, but as I purpose you just today...
PAC 22
twrp recovery
activo speed and reload
psn kernel patcher
very small mod of system and framework
Donwloading xD , And Test
Gilmar Mess said:
Donwloading xD , And Test
Click to expand...
Click to collapse
You? Again? Thanks. Hope it will give you more enjoy that my PAS
Mukiai said:
You? Again? Thanks. Hope it will give you more enjoy that my PAS
Click to expand...
Click to collapse
hahaha Yep me Again ...
xD
I'm dubious. S-PAC or ULTRASLIM-PAC? Which do you recommend for me? xD
Gilmar Mess said:
hahaha Yep me Again ...
xD
I'm dubious. S-PAC or ULTRASLIM-PAC? Which do you recommend for me? xD
Click to expand...
Click to collapse
XD
I've install the S-Pac because I didin't want to all customize. But it's for some days, just the time that I can really see its perf. If you want to add your apks, without enoying with delete the other files, Ultraslim is for you.
In S-Pac, you'll have Apollo, Naked browser, LightningHome, the calc...
Not really most difference , just the size.... So as you want!??
Re: [ROM] [MOD] >>>> S-PAC <<<< [slimmed PacRom] 21.02.2013
Thanks guys, downloading :thumbup:
Sent from my GT-S5830 using xda premium
Mukiai said:
XD
I've install the S-Pac because I didin't want to all customize. But it's for some days, just the time that I can really see its perf. If you want to add your apks, without enoying with delete the other files, Ultraslim is for you.
In S-Pac, you'll have Apollo, Naked browser, LightningHome, the calc...
Not really most difference , just the size.... So as you want!??
Click to expand...
Click to collapse
S-Pac is fine
Hey Man Download Link Broken =x
Gilmar Mess said:
S-Pac is fine
Hey Man Download Link Broken =x
Click to expand...
Click to collapse
how about with the ram usage ??
Re: [ROM] [MOD] >>>> S-PAC <<<< [slimmed PacRom] 21.02.2013
I like the sound of this,simply because I like slim roms.
When I get home from work I will flash it and try.
Thanks
Sent from my GT-S5830 using xda app-developers app
Gilmar Mess said:
S-Pac is fine
Hey Man Download Link Broken =x
Click to expand...
Click to collapse
test this
-----------------------------------------------------------------
mirror
EricSoedarmadji said:
how about with the ram usage ??
Click to expand...
Click to collapse
attachment
Mukiai said:
test this
i'm uploading on dropbox, so if needed , in few min there's a mirror. (I'll update this message)
Click to expand...
Click to collapse
Broken Yet =x
EDIT: Mirror Work Fine Thx
Gilmar Mess said:
Broken Yet =x
EDIT: Mirror Work Fine Thx
Click to expand...
Click to collapse
ok sorry for inconvenience I'll update this on my posts
S_PAC update
Link in the 2nd post,
The new features of 4.2.2, PA 3.0.0, near all settings parameters OK (add custom tiles always broken i.e.)
If you want all changelog, go here (in the same time you'll can tick thanks to OldDroid, who works on it and permitt that slim versions )
i'd like to install ultraslim, cause it's barebone ROM right ?
I can add some system apps freely that i want to, can't I ?
downloading both (SPAC and ultraSPAC) now :3
icampbara said:
i'd like to install ultraslim, cause it's barebone ROM right ?
I can add some system apps freely that i want to, can't I ?
downloading both (SPAC and ultraSPAC) now :3
Click to expand...
Click to collapse
Yes feel free to add your apps UltraSlim is just the base with Pac 20.0. You have libs and principals files. Then you make your Ace like you. Jst put apk in system/app in zip file
Re: [ROM] [MOD] >>>> S-PAC <<<< [slimmed PacRom] 23.02.2013
I flashed it twice and always setup wizard fc
Enviado desde mi Transformer TF101 usando Tapatalk 2
maxidad35 said:
I flashed it twice and always setup wizard fc
Enviado desde mi Transformer TF101 usando Tapatalk 2
Click to expand...
Click to collapse
I was also so, simply uploading the rom wipe all and flash gapps, and configuration started.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Hi! I want to share my mod and I hope it will be useful to someone!
FEATURES
1. Based on CyanogenMod.
2. One ROM for the two devices: Galaxy S I9000 and Captivate I897.
3. ROM is based on the AROMA installer, you can choose the necessary kernel, modem, additional apps and other options:
Kernel:
Semaphore JB.
Devil Kernel.
CyanCore.
Modem:
Galaxy S I9000 - JW4, JVU or ZSJPG.
Captivate I897 - UGKG3, BVJJW2 or TUBJV6.
Launcher:
Nova Launcher.
TouchWizUX.
Trebuchet.
Bootanimation:
CyanogenMod 10.2.
Jelly Bean.
Galaxy S.
Nexus.
Apps:
Samsung: SamsungApps.
Themes: TouchWiz 4.5, UBER Jelly, BlackedOut Black, MIUIv4 by Z25, MIUI Dark, MIUI Holo.
Google: YouTube, Maps, Street view, Hangouts, Google Chrome, Google Keyboard, Google Keep.
Useful apps: Adobe Flash Player, MX Player, ES Explorer, Screen Off and Lock, Feedly, Titanium Backup, Smart Voice Recorder.
Additional options:
Swap on zRam (for CyanCore only).
CrossBreeder (RNGD Havege only).
ViPER4Android FX.
Die-Hard launcher (from V6 Supercharger).
OpenPDroid patch.
Face Unlock.
GPS conf - you can choose your country for installing the best configuration.
4. Deleted apps: Apollo.apk, CMFileManager.apk, CMUpdater.apk (replaced with OTA Updater), SoundRecorder.apk, Term.apk, VoiceDialer.apk, VoicePlus.apk.
5. Added apps: Google Play Books, Google Play Games, Google Play Movies, Google Play Music, Voodoo Sound.
6. Added Gapps (updated if possible).
7. Hugemem patch.
8. Tweaks, addons:
Build.prop tweaks.
CrossBreeder tweaks (optional, RNGD Havege only).
Zipalign and Fix permissions (from V6 SuperCharger) will run weekly by crond.
Detailing (from V6 SuperCharger) will run daily by crond.
Drop caches will run every 3 hours by crond.
Battery will be calibrated once after the first charge to 100%.
GPS fix.
9. You can receive updates via OTA Updater.
Click to expand...
Click to collapse
DISCLAIMER
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
By using the rom you agree with the above terms!
Click to expand...
Click to collapse
Q/A
Q. How to install this ROM?
A. To install ROM:
1. Be sure you have installed any ROM with CyanogenMod 10.2 partition layout at now, e.g. CyanogenMod 10.2, if you are not sure just flash CyanogenMod 10.2.
2. Backup your data! All data will be wiped!
3. Put zip file to /sdcard, reboot to recovery and choose install zip from sdcard -> choose zip from sdcard and select zip file - AROMA installer wil be started.
4. Follow installation wizard instruction.
Q. Why is this ROM so big?
A. Because it includes many kernels, modems, apps etc., but you can choose only necessary ones.
Click to expand...
Click to collapse
INSTALLATION SCRENSHOTS (MAY VARY IN ACTUAL INSTALLATION)
Click to expand...
Click to collapse
Download from Android File Host
Click to expand...
Click to collapse
MD5:
c74923f0ffcb498c850b2525d3886161 *Optimum JellyBean by Likeman v.6.1.zip
CREDITS
CM developers
stratosk
DerTeufel1980
ts1506
Chainfire
amarullz
zeppelinrox
idcrisis
pikachu01
mateorod
FFU5y
ViPER520 and zhuhang
thomassafca
Fabian Cruz
Mr.Nigma...
Blackout1911
ZduneX25
jasonevil
Android File Host project
OTA-UpdateCenter.pro project
Click to expand...
Click to collapse
CHANGELOG
v.6.1
Base updated to CyanogenMod 10.2.1.
I/O, VM tweaks corrected a little.
ViPER4Android FX updated to v.2.3.2.2. Fixed a glitch that caused driver installation when you first start the app.
Apps updated, stock Calendar.apk and Email.apk returned, CMUpdater.apk replaced with OTA Updater.
System partition cleaned once again.
v.6.0
Base updated to CyanogenMod 10.2.0.
Kernels updated to the latest versions.
CrossBreeder Ads- feature replaced (temp) with hosts file. RNGD Havege updated. Added some I/O, VM tweaks.
GPS is working a bit better - little more satellites, little higher signal level.
Beats replaced with ViPER4Android FX.
Zipalign, Fix permissions and Detailing scripts updated.
System partition cleaned once again.
Apps updated.
v.5.3
Base updated to CyanogenMod 10.1 20130804 nightly.
Fixed the bug with 720p video recording.
Fixed the bug with SMS sending (by CM developers).
Fixed the bug with Wi-Fi at Devil kernel.
Kernels updated to the latest versions.
CrossBreeder Ads- list updated.
System partition cleaned once again.
Apps updated.
v.5.2
Base updated to CyanogenMod 10.1 20130712 nightly (includes all the latest security patches).
Kernel and I/O tweaks replaced to CrossBreeder.
Kernels updated to the latest versions.
Now drop caches will run daily.
System partition cleaned up a bit.
Added MIUI Dark and MIUI Holo themes.
Apps updated.
v.5.1
Base updated to CyanogenMod 10.1 20130624 nightly.
No more support for Vibrant T959 (size is reduced a little)
Kernels updated to the latest versions.
No more LMK from V6 Supercharger (stock values are better).
Kernel and I/O tweaks changed a little.
OpenPDroid patch added.
Face Unlock installation is optional now, not available for Captivate I897.
Now drop caches will run every 12 hours.
Hangouts installation is optional now (because it's big and laggy).
If you didn't choose ES Explorer in installation wizard CM Filemanager will be installed.
Apps updated.
v.5.0
First release at XDA.
Click to expand...
Click to collapse
Reserved
Hey Likeman, thanks for sharing your work! :good:
Is the ROM itself any different than CM10.1 RC4?
Re: Optimum Jellybean v.5.0
a-id said:
Click to expand...
Click to collapse
Thanks for another ROM to try, downloading now
Sounds very well, thanks for giving us a New rom
Sent from my SGH-I897 using xda app-developers app
another new rom for our cappy:laugh:
happy to try it
and by the way, it is the first with aroma installer
I was a little skeptical about this ROM at first but I'm glad I tried it. It has been pretty good so far not to mention the fact that I could customize the ROM in a way that cm10.1 for example won't let you during installation. As far as performance I can see no notable difference between this and cm10.1. Maybe a little faster. Anyways great ROM much appreciated!
Val D. said:
Hey Likeman, thanks for sharing your work! :good:
Is the ROM itself any different than CM10.1 RC4?
Click to expand...
Click to collapse
No, it has no any difference in code, almost all of the changes listed in the features.
mx828 said:
I was a little skeptical about this ROM at first but I'm glad I tried it. It has been pretty good so far not to mention the fact that I could customize the ROM in a way that cm10.1 for example won't let you during installation. As far as performance I can see no notable difference between this and cm10.1. Maybe a little faster. Anyways great ROM much appreciated!
Click to expand...
Click to collapse
Thanks for sharing your thoughts!
a-id said:
No, it has no any difference in code, almost all of the changes listed in the features.
Click to expand...
Click to collapse
OK, your package basically offers custom installation of CM 10.1 RC4, correct?
Val D. said:
OK, your package basically offers custom installation of CM 10.1 RC4, correct?
Click to expand...
Click to collapse
Basically, yes, it does, but not completely, if you need completely original CM, you have to flash CM and what you need else (kernel, modem etc).
a-id said:
Basically, yes, it does, but not completely, if you need completely original CM, you have to flash CM and what you need else (kernel, modem etc).
Click to expand...
Click to collapse
I'm trying to figure out why I need to download this >500MB universal package if I already have RC4 running (as per instructions). All I need to do is to download and flash my preferred kernel, modem, gapps, bootanimation, etc... a total of 50MB or less. In other words, starting from RC4 after Optimum JellyBean installation I'm going to have this same RC4 with very same configuration I prefer. It does make sense only in case the user is not very comfortable with flashing kernel, modem, etc. In the same time this inexperienced user is expected to flash a kernel (as recommended) in order to proceed with installation, also to know what exactly he wants to have and select it during installation process. As I understand, this package is not a new ROM. It's user-friendly (kind of) custom installation of CM 10.1 RC4. It is good though, I've tried it and it works. Thanks again!
:good:
Val D. said:
I'm trying to figure out why I need to download this >500MB universal package if I already have RC4 running (as per instructions). All I need to do is to download and flash my preferred kernel, modem, gapps, bootanimation, etc... a total of 50MB or less. In other words, starting from RC4 after Optimum JellyBean installation I'm going to have this same RC4 with very same configuration I prefer. It does make sense only in case the user is not very comfortable with flashing kernel, modem, etc. In the same time this inexperienced user is expected to flash a kernel (as recommended) in order to proceed with installation, also to know what exactly he wants to have and select it during installation process. As I understand, this package is not a new ROM. It's user-friendly (kind of) custom installation of CM 10.1 RC4. It is good though, I've tried it and it works. Thanks again!
:good:
Click to expand...
Click to collapse
Yes, you're right this package is not a new ROM, it's custom installation of CM 10.1 RC4 with tweaks, some patches (libsqlite.so, services,jar, systemui.apk) and useful automated functions (zipalign, detailing, drop caches which is running by crond).
Re: Optimum Jellybean v.5.0 install
Hi Likeman, I would like to share that I was having issues with the Aroma installer aborting because I had wiped my /system before starting the installation. I had to do an advanced Nandroid restore of a System folder and then the Aroma installer proceeded correctly. I had been receiving an error "Installation wizard has found that you have an incompatible ROM!" until I had /system in place, and then I properly received "Detected Samsung Captivate SGH-i897, is this correct?" Perhaps you could add to the OP that wiping /system before install is not recommended?
Thanks again, I am trying out the ROM now
They Drew First Blood said:
Hi Likeman, I would like to share that I was having issues with the Aroma installer aborting because I had wiped my /system before starting the installation. I had to do an advanced Nandroid restore of a System folder and then the Aroma installer proceeded correctly. I had been receiving an error "Installation wizard has found that you have an incompatible ROM!" until I had /system in place, and then I properly received "Detected Samsung Captivate SGH-i897, is this correct?" Perhaps you could add to the OP that wiping /system before install is not recommended?
Thanks again, I am trying out the ROM now
Click to expand...
Click to collapse
I think there is no need to wipe /system anyway because when you flash any ROM (with or without wipe) /system partition will be formated anyway. You got that message because AROMA installer wasn't be able to detect what ROM version you were using. I think I need to find another way to detect is the original ROM compatible. Thanks for sharing your experience!
Re: Optimum Jellybean v.5.0
They Drew First Blood said:
Thanks again, I am trying out the ROM now
Click to expand...
Click to collapse
I see that Face Unlock is running- Captivates do not have a front-facing camera
They Drew First Blood said:
I see that Face Unlock is running- Captivates do not have a front-facing camera
Click to expand...
Click to collapse
You're right, I'll correct the behavior of the installer in the next version of AROMA configuration.
What's the bugs in this Build ??
Master-ZizO said:
What's the bugs in this Build ??
Click to expand...
Click to collapse
All the bugs CM 10.1 RC4 has (if it has)
Отправлено с моего GT-I9000 через Tapatalk
a-id said:
All the bugs CM 10.1 RC4 has (if it has)
Отправлено с моего GT-I9000 через Tapatalk
Click to expand...
Click to collapse
i don't know what is the bugs in cm10.1 rc4 ... please tell me
i am on GB 2.3.5 ..... in ur opinion JB is laggy or its good ?
Master-ZizO said:
... in ur opinion JB is laggy or its good ?
Click to expand...
Click to collapse
In my opinion CM10.1 RC4 is more stable than your stock Samsung ROM.
There is no comparison between JB and GB. JB is better in every single detail, including speed.
Your warranty is now void, don't blame me if your phone blows up blahblahblah. Make sure to have latest TWRP as well (current: 3.0.2-1). Should have removed encryption as well.
BACKUP! Both Stock and Ultra have the untouched stock kernel, so if you want color control you need to flash one of the kernels below after ROM.
*If you run into error 7 while flashing, just restart TWRP and flash again.
ROM Info:
Only system and kernel are being flashed, no Modem, BL, etc.
Based off of 20A Complete zip from @autoprime. Only things touched are bootanimation (pixel black), removed poweron.ogg & it has also been zip-aligned.
Flash in recovery, wipe cache/dalvik(art), profit??
SuperSu and Busybox included. Only /system is wiped, data left alone.
Can dirty flash over current 20A if you like.
Any errors, etc, would be related to deodexing, as all files are stock.- Haven't had any problems myself.
Link: H830_20A_DeOdexed
MD5: f5cae3d2a5d9ebf58f04aa1ba3065487
Enjoy.
Credits:
@tungkick, @wolfu11 and @arjuna_ for root! @autoprime for stock zip. @Chainfire for supersu. @SuperR. for the kitchen. @Tilde88 for pointing me in the right direction. @PlayerZ_ZawZaw for bootanimation. @jcadduono for TWRP. @osm0sis for busybox installer and AIK.
....somebody I'm sure I forgot.
It's people like them that make Android great!
Finally, thanks to Google/LG & XDA.
...whew.
Modded NotSoStock Kernel for H830 (Thanks to @Tilde88 for permission to use this and basically walking me through the process!:highfive:, Thanks go here, [H918][ROM + Kernel] NRD90M Modded NotSoStock)
Features
*Based off 3.18.31 from @Tilde88 source.
*Compiled using gcc-linaro-6.1.1-2016.08-x86_64_aarch64-linux-gnu toolchain.
*The kernel includes Westwood (set by default) TCP Congestion
*blu_active cpu governor (not set by default, you can use an app like Kernel Adiutor)
*Tons of battery improvements within the kernel, bluetooth and FM also tweaked up a bit.
*KCAL Color Control & Color Control app! Thanks to @savoca for KCAL & app! Thanks to @freeza for the updated KCAL.c source file.
( Good starting point for color: All 3 colors at 256, Saturation 64, Value 127, Contrast 129.)
"Know that I love deep, rich, vibrant colors. Also, changing colors will not change effects on pictures taken! This is post-processing. Your phone's screen is what changes, not the files that you create.
Note: Adding saturation (vibrance) will always give some sort of color banding -especially since KCAL is post-processing. You can minimize color banding by ever-so-slightly reducing gamma (read as "Value" in the Color Control app), and by ever-so-slightly fine-tuning Contrast. The value changes would be minimal, and the color banding will only be reduced ever-so-slightly, but this is just how it is. Nonetheless, the device looks friggin amazing with the color options set." -Tilde88
Link: H830-NSS-5.5
MD5: dc1ec15a02116df3f21917d4663b19cb
Stock+ Kernel
*Built using https://github.com/jcadduono/android_kernel_lge_msm8996 as source.
*Compiled using gcc-linaro-6.1.1-2016.08-x86_64_aarch64-linux-gnu
*Added Westwood as default TCP Congestion
*Color Control
*That's it*
Link:20A_Stock_Westwood+ColorControl
MD5: 08b9b9c9694ad8f591d6a15cf5129bf4
Source: (NSS)-https://github.com/Tilde88/nss
(Stock+)-https://github.com/lordodin912/H830-20A-
Thanks again to @jcadduono for the scripts used for compiling as well as the original source! https://github.com/jcadduono/android_kernel_lge_msm8996
Ultra Lite v1 --- Warning--- Not For Everyone---
Basically just wanted to remove whatever I felt like and don't use, you've been warned.
Link:Ultra Lite v1
MD5: 4d005c6d0dc404d257f1a4f7b11e2a1d
Backup:Ultra Lite v1 Backup Files
MD5: 4e68a2c6c4d693d08382466e55456439
Stuff Removed:
\system\app
\AndroidPay
\BookmarkProvider
\Chrome
\CloudPrint
\CtsShimPrebuilt
\Drive
\DriveActivator
\DrmService
\EasterEgg
\EditorsDocsStub
\EditorsSheetsStub
\EditorsSlidesStub
\Facebook_AppManager
\FaceLock
\FidoASM
\FidoAuthenticator
\FidoClient
\Gmail2
\GooglePrintRecommendationService
\GoogleTTS
\Hangouts
\LGAccount
\LGAirDrive
\LGATCMDService
\LGBackupLauncher
\LGDrm
\LGFOTA
\LGMusicShare
\LGSpringCleaning
\LGStk
\LGVRAgent
\Maps
\Music2
\Photos
\PrintSpooler
\QuicksetSDK
\SmartMessagingEngine
\SmartShare
\SmartShareProvider
\talkback
\Upsell
\Videos
\YouTube
\priv-app
\AdaptClient
\BackupRestoreConfirmation
\CloudHub
\CtsShimPrivPrebuilt
\EdenService
\EodEngine
\Facebook_Installer
\GCUV
\GoogleFeedback
\HotwordEnrollment
\LG360Wallpaper
\LGActionManager
\LGAirDriveSetting
\LGApplicationManager
\LGBackup
\LGCalendar
\LGCalendarProvider
\LGConciergeBoard
\LGCover
\LGEasyHome
\LGEmail
\LGExchange
\LGFileManager
\LGIFTTT
\LGLDB
\LGMapUI
\LGMusic
\LGMusicWidget
\LGNLPService
\LGP2pService
\LGPartnerBookmarksProvider
\LGPCSuiteService
\LGQHelp
\LGQHelpService
\LGSignBoard
\LGSignBoardProvider
\LGSignBoardSettings
\LGSmartSharePush
\LGSnapPage
\LGTTSPAService
\LGUpdateCenter
\LGVoiceCare
\LGVoiceRecorder
\LGVRPlayer
\LGWeatherService
\LGWernickeManager
\LGWifiHotspotWidget
\LIAInformant
\LIAS4URecommender
\LicenseProvider
\Lookout
\MyPlacesEngine
\MyPlacesSettings
\NameID
\PromoHelper
\SmartSetting
\Tag
\TMO_MyAccount
\TMO_Simlock
\UnifiedEULA
\Velvet
system\vendor\overlay
\com.lge.appbox.client
\com.lge.concierge
\com.lge.email
\com.lge.lgworld
\com.lge.lifetracker
\com.lge.provider.signboard
\com.lge.qhelp
\com.lge.qmemoplus
\com.lge.qremote
\com.lge.signboard
\com.lge.signboard.settings
\com.lge.sizechangable.weather
\com.lge.sizechangable.weather.platform
\com.lge.sizechangable.weather.theme.optimus
system\etc\mrg_default_forms\ConciergeBoard
system\etc\mrg_default_forms\QvoicePlus
system\etc\permissions\com.lge.fota.xml
& Deleted most ringtones, etc in media. That's it.
These files have not been removed. If you feel like removing NFC for some reason, ha, remove files below manually. Also there are a couple other things that can be removed as well, that I forgot.
app\LgNfc
priv-app\NfcSettings
system\etc\nfc
system\etc\permissions\android.hardware.nfc.hce.xml
system\etc\permissions\android.hardware.nfc.hcef.xml
system\etc\permissions\android.hardware.nfc.xml
system\etc\permissions\com.gsma.services.nfc.xml
system\lib\libLGnfc_config.so
system\lib\libLGnfc_jni.so
system\lib\libnfc_ndef.so
system\lib\libnfc-nxp-nci.so
system\lib\hw\nfc_lg.default.so
Repeat for lib64
system\priv-app\NfcSettings
system\vendor\overlay\com.lge.NfcSettings
Other
system\etc\permissions\com.lge.lgdrm.xml
system\etc\permissions\com.lge.sizechangable.weather.platform.xml
system\etc\recovery-resource.dat
If anyone can find anything more to remove, please share. Want to remove as much as possible, because why not, and prolly missed some libs and stuff.[emoji15]
Can I flash this if I'm on CM right now (with factory reset ofc) or would I need to go through LG Up and flash a vanilla rom first?
M3rsh said:
Can I flash this if I'm on CM right now (with factory reset ofc) or would I need to go through LG Up and flash a vanilla rom first?
Click to expand...
Click to collapse
If you've already upgraded to N (20a), then yes.
Will this work with dualboot? I need stock to play pokemonGo but won't throw root away in my main setup
tavocabe said:
Will this work with dualboot? I need stock to play pokemonGo but won't throw root away in my main setup
Click to expand...
Click to collapse
You can try.
lordodin912 said:
^You can try.
Click to expand...
Click to collapse
I guess it won't work anyway as I see a supersu file in the zip?
EDIT: will try removing it and flashing and see if it works. Thanks!
tavocabe said:
I guess it won't work anyway as I see a supersu file in the zip?
EDIT: will try removing it and flashing and see if it works. Thanks!
Click to expand...
Click to collapse
Remove "rootzip" & "busybox" folders before patching/flashing.
P.S. If you haven't already updated to N(20A) it may not boot regardless.
lordodin912 said:
Remove "rootzip" & "busybox" folders before patching/flashing.
P.S. If you haven't already updated to N(20A) it may not boot regardless.
Click to expand...
Click to collapse
Yeah it didn't boot, I'm still in MM because of xposed. How much of a trouble is to replicate this deodexed rom but on 10j?
tavocabe said:
Yeah it didn't boot, I'm still in MM because of xposed. How much of a trouble is to replicate this deodexed rom but on 10j?
Click to expand...
Click to collapse
You can take the system.img and boot.img from either the kdz with LG Firmware Extractor or from autoprime complete zip.
Then you need to Google "superR kitchen xda", if your using windows there is a VM iso in the thread you can use with VirtualBox etc.
Once you have the kitchen working just remember to use smali for deodexing when it asks and don't sign the zip or let it remove the meta-inf folders from apps, again it will ask.
Once its built, remove the assert from the very top of the updater-script.
Hope you figure it out. If not, maybe tomorrow I can whip it up for ya.
PM me if you have trouble. Ill try to help best I can.
I installed autoprime's 10j complete zip as secondary and it booted fine, unfortunately I couldn't pass safetynet I guess it has something to do with modifying the boot partition, oh well. I'll install your zip as soon as xposed for nougat becomes available.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Stock debloated/deodexed nougat....no tweaks.
Another one, moving on up. Ha. Would like 150,000 though.
tavocabe said:
I installed autoprime's 10j complete zip as secondary and it booted fine, unfortunately I couldn't pass safetynet I guess it has something to do with modifying the boot partition, oh well. I'll install your zip as soon as xposed for nougat becomes available.
Click to expand...
Click to collapse
I think the deal is that its game over if even your bootloader is unlocked.
z28james said:
I think the deal is that its game over if even your bootloader is unlocked.
Click to expand...
Click to collapse
Nah it works fine if I don't touch anything ( i.e. root, dm verity, encryption, xposed, etc.) and leave 100% stock even when bootloader is unlocked
Update: added separate flashable "Modded NotSoStock" kernel.
lordodin912 said:
Update: added separate flashable "Modded NotSoStock" kernel.
Click to expand...
Click to collapse
Can it be used on stock MM 10j?
About to go home and flash ..care to share your kcal values
Sent from my LG-H830 using Tapatalk
tavocabe said:
Can it be used on stock MM 10j?
Click to expand...
Click to collapse
Its for N, so I think its safe to say no.
pilo99 said:
About to go home and flash ..care to share your kcal values
Click to expand...
Click to collapse
In OP.
I flashed and it does run smooth and i like the vibrant color profile ...looking fwd to more tweaks and debloat ...geat job
Sent from my LG-H830 using Tapatalk
Hi all, any estimation dates on when pixel experience will be available for Mi9T? I'm so excited for it.
In this thread i added Pixel Experience GSI
Been using it since yesterday and all is working fine, as if i was using my old Xiaomi mi6 with the offical PixelExperience rom.
Only thing fond not working is bluetooth audio. I can make Google assistant communications and phone calls but no media audio is comming thru.
capoeirabg said:
Been using it since yesterday and all is working fine, as if i was using my old Xiaomi mi6 with the offical PixelExperience rom.
Only thing fond not working is bluetooth audio. I can make Google assistant communications and phone calls but no media audio is comming thru.
Click to expand...
Click to collapse
Wait... Does the FPR and The popup selfie cam work as well???
Hows battery life?
LucienL said:
Wait... Does the FPR and The popup selfie cam work as well???
Hows battery life?
Click to expand...
Click to collapse
Battery life is just as good as MIUI (I've had it for only 2 days now so let's see how it works long term...). FPR works but is kinda slow. Also, you have to wake the screen first unlike in MIUI where FPR works while the screen is off. The popup selfie cam, unfortunately, requires you to send it commands via terminal in order to work (that is if you opt to flash the auto-retract patch. Otherwise, your front cam will stay popped-out forever.)
UPDATE: The Pixel Experience ROM I was referring to above was from the GSI forums.
The Pixel Experience GSI from this thread was apparently made specifically for the K20 Pro. Being a GSI, of course, it should work like just as flawlessly with the standard K20... And it did. I tried it this morning and was nearly perfect! Audio isn't distorted, the selfie camera works, FP was satisfactory though you still have to wake up the screen.
Yes camera work as it should. And audio is good but no bluetooth media is a bummer and will wait till some one fix it.
haakufurou said:
The Pixel Experience GSI from this thread was apparently made specifically for the K20 Pro. Being a GSI, of course, it should work like just as flawlessly with the standard K20... And it did. I tried it this morning and was nearly perfect! Audio isn't distorted, the selfie camera works, FP was satisfactory though you still have to wake up the screen.
Click to expand...
Click to collapse
capoeirabg said:
Yes camera work as it should. And audio is good but no bluetooth media is a bummer and will wait till some one fix it.
Click to expand...
Click to collapse
Pixel experience from here https://forum.xda-developers.com/mi-9t/how-to/index-roms-misc-9t-t3950115 from 4pda it is in zip, so we just install it in twrp, or we have to do unpack and install as other gsi rom?
slavke1976 said:
Pixel experience from here https://forum.xda-developers.com/mi-9t/how-to/index-roms-misc-9t-t3950115 from 4pda it is in zip, so we just install it in twrp, or we have to do unpack and install as other gsi rom?
Click to expand...
Click to collapse
You have to unpack the .zip first to get the .img file. You then flash that as a System Image like you would any other GSI.
Very interesting about firmwares. on 4pda forum. They say that we can use firmware from k20pro but it needs to be edit.
https://4pda.ru/forum/index.php?showtopic=960347&st=0#entry87372355 Maybe it is on russian, but i use google translate Here are some discussions :
Native firmwares from the older brother are suitable for our smart, with some edits, but they are launched, the Wi-Fi access point does not work from the RR and Lineage OS bugs, and the Wi-Fi in general, plows everything in a pixel, checked it and the NFC prog, the card saw only I do not have the right card to bind for payment, so this moment is not particularly interesting to me, otherwise the most successful of the three is a pixel ...
so what kind of jokes are there, then for jokes they will be smashed into trash)) you
download the necessary firmware from their (K20 pro) branch, unpacked it on your computer, replace boot.img and vbmeta with your own, I use xiaomi.eu_multi_HMK20MI9T_V10.3.12.0.PFJCNXM_v -9
and still need notepad ++ to edit the installation script in META-INF-com-google-android-updater-script
so the correct script looks like
#
as well as the original
#
Ie you need to delete the first two lines, save, pack everything back in zip and on firmware in TVRP
slavke1976 said:
Very interesting about firmwares. on 4pda forum. They say that we can use firmware from k20pro but it needs to be edit.
Maybe it is on russian, but i use google translate Here are some discussions :
Native firmwares from the older brother are suitable for our smart, with some edits, but they are launched, the Wi-Fi access point does not work from the RR and Lineage OS bugs, and the Wi-Fi in general, plows everything in a pixel, checked it and the NFC prog, the card saw only I do not have the right card to bind for payment, so this moment is not particularly interesting to me, otherwise the most successful of the three is a pixel ...
so what kind of jokes are there, then for jokes they will be smashed into trash)) you
download the necessary firmware from their (K20 pro) branch, unpacked it on your computer, replace boot.img and vbmeta with your own, I use xiaomi.eu_multi_HMK20MI9T_V10.3.12.0.PFJCNXM_v -9
and still need notepad ++ to edit the installation script in META-INF-com-google-android-updater-script
so the correct script looks like
#
as well as the original
#
Ie you need to delete the first two lines, save, pack everything back in zip and on firmware in TVRP
Click to expand...
Click to collapse
Wait, so does that mean we should be able to use custom roms built for the K20 Pro on our mi 9t, as long as we rebuild the rom with the correct boot.img?
Calthrop said:
Wait, so does that mean we should be able to use custom roms built for the K20 Pro on our mi 9t, as long as we rebuild the rom with the correct boot.img?
Click to expand...
Click to collapse
i just download pixelexperience from k20pro and will try to do that edit. will post later here.
only problem for me is i am using OS X, so dont have notepad++ i have to find alternative, dont want to instal windows now.
I am using Pixel Rom GSI for the K20 Pro + Magisk + Permissive since yesterday and everything works, the bluetooth works with the perfect fix.
Only two things to consider:
1- The fingerprint is activated only when the screen is turned on.
2- The camera LED does not activate when you exit or save.
Of the rest 100% stable.
I successfully boot into system and pixel experience rom for k20pro editing rom as it posted on 4pda forum.
For now camera works selfy also, and red led works when popup.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Sent from my Redmi K20 Pro using Tapatalk
slavke1976 said:
I successfully boot into system and pixel experience rom for k20pro editing rom as it posted on 4pda forum.
For now camera works selfy also, and red led works when popup.
View attachment 4797665View attachment 4797666View attachment 4797667
Sent from my Redmi K20 Pro using Tapatalk
Click to expand...
Click to collapse
Fingerprint works correctly?
did you encounter issues?
isman77 said:
Fingerprint works correctly?
did you encounter issues?
Click to expand...
Click to collapse
I will add fingerprint to see.
Sent from my Redmi K20 Pro using Tapatalk
slavke1976 said:
I will add fingerprint to see.
Sent from my Redmi K20 Pro using Tapatalk
Click to expand...
Click to collapse
ok I'll wait for your answer to give me an opinion
slavke1976 said:
I successfully boot into system and pixel experience rom for k20pro editing rom as it posted on 4pda forum.
For now camera works selfy also, and red led works when popup.
View attachment 4797665View attachment 4797666View attachment 4797667
Sent from my Redmi K20 Pro using Tapatalk
Click to expand...
Click to collapse
This is great news. Good work on getting it working! Was it difficult and can you tell us which files you edited and with what lines? I read the post on the Russian forum, but I'm not totally sure on what was edited/done.
gsi image PE
Hello everyone,I'm from the Russian forum,use the second method,in the end you get a clean gsi image that will eliminate all sorts of strange bugs,yet presented firmware,it's not for our phone.the method is very simple,pixel experience is very like ( RR,Lineage OS have wifi bug)
isman77 said:
ok I'll wait for your answer to give me an opinion
Click to expand...
Click to collapse
Finger print take finger scan, but as i have glass protector it often say it is dirty sensor, to clean it. but it take scan.
and while i try to unlock, it cant, saying that or i do quick, or sensor is not clean.
i will not put out screen protector to test scanner.
Calthrop said:
This is great news. Good work on getting it working! Was it difficult and can you tell us which files you edited and with what lines? I read the post on the Russian forum, but I'm not totally sure on what was edited/done.
Click to expand...
Click to collapse
Go here post 6 https://4pda.ru/forum/index.php?showtopic=960347&st=0#entry87372355 and use google translate to translate. I have addon on chrome browser (PC) so it translate automaticaly.
it is explained well, what we take from EU MIUI rom to put (replace) in pixel rom.
then to edit script, to delete firs 2 lines . and make again zip file to flash in twrp.
I will try to upload my pixel rom, but dont have fast internet.
slavke1976 said:
Finger print take finger scan, but as i have glass protector it often say it is dirty sensor, to clean it. but it take scan.
and while i try to unlock, it cant, saying that or i do quick, or sensor is not clean.
i will not put out screen protector to test scanner.
Go here post 6 https://4pda.ru/forum/index.php?showtopic=960347&st=0#entry87372355 and use google translate to translate. I have addon on chrome browser (PC) so it translate automaticaly.
it is explained well, what we take from EU MIUI rom to put (replace) in pixel rom.
then to edit script, to delete firs 2 lines . and make again zip file to flash in twrp.
I will try to upload my pixel rom, but dont have fast internet.
Click to expand...
Click to collapse
Hum thank you.