Your warranty is now void, don't blame me if your phone blows up blahblahblah. Make sure to have latest TWRP as well (current: 3.0.2-1). Should have removed encryption as well.
BACKUP! Both Stock and Ultra have the untouched stock kernel, so if you want color control you need to flash one of the kernels below after ROM.
*If you run into error 7 while flashing, just restart TWRP and flash again.
ROM Info:
Only system and kernel are being flashed, no Modem, BL, etc.
Based off of 20A Complete zip from @autoprime. Only things touched are bootanimation (pixel black), removed poweron.ogg & it has also been zip-aligned.
Flash in recovery, wipe cache/dalvik(art), profit??
SuperSu and Busybox included. Only /system is wiped, data left alone.
Can dirty flash over current 20A if you like.
Any errors, etc, would be related to deodexing, as all files are stock.- Haven't had any problems myself.
Link: H830_20A_DeOdexed
MD5: f5cae3d2a5d9ebf58f04aa1ba3065487
Enjoy.
Credits:
@tungkick, @wolfu11 and @arjuna_ for root! @autoprime for stock zip. @Chainfire for supersu. @SuperR. for the kitchen. @Tilde88 for pointing me in the right direction. @PlayerZ_ZawZaw for bootanimation. @jcadduono for TWRP. @osm0sis for busybox installer and AIK.
....somebody I'm sure I forgot.
It's people like them that make Android great!
Finally, thanks to Google/LG & XDA.
...whew.
Modded NotSoStock Kernel for H830 (Thanks to @Tilde88 for permission to use this and basically walking me through the process!:highfive:, Thanks go here, [H918][ROM + Kernel] NRD90M Modded NotSoStock)
Features
*Based off 3.18.31 from @Tilde88 source.
*Compiled using gcc-linaro-6.1.1-2016.08-x86_64_aarch64-linux-gnu toolchain.
*The kernel includes Westwood (set by default) TCP Congestion
*blu_active cpu governor (not set by default, you can use an app like Kernel Adiutor)
*Tons of battery improvements within the kernel, bluetooth and FM also tweaked up a bit.
*KCAL Color Control & Color Control app! Thanks to @savoca for KCAL & app! Thanks to @freeza for the updated KCAL.c source file.
( Good starting point for color: All 3 colors at 256, Saturation 64, Value 127, Contrast 129.)
"Know that I love deep, rich, vibrant colors. Also, changing colors will not change effects on pictures taken! This is post-processing. Your phone's screen is what changes, not the files that you create.
Note: Adding saturation (vibrance) will always give some sort of color banding -especially since KCAL is post-processing. You can minimize color banding by ever-so-slightly reducing gamma (read as "Value" in the Color Control app), and by ever-so-slightly fine-tuning Contrast. The value changes would be minimal, and the color banding will only be reduced ever-so-slightly, but this is just how it is. Nonetheless, the device looks friggin amazing with the color options set." -Tilde88
Link: H830-NSS-5.5
MD5: dc1ec15a02116df3f21917d4663b19cb
Stock+ Kernel
*Built using https://github.com/jcadduono/android_kernel_lge_msm8996 as source.
*Compiled using gcc-linaro-6.1.1-2016.08-x86_64_aarch64-linux-gnu
*Added Westwood as default TCP Congestion
*Color Control
*That's it*
Link:20A_Stock_Westwood+ColorControl
MD5: 08b9b9c9694ad8f591d6a15cf5129bf4
Source: (NSS)-https://github.com/Tilde88/nss
(Stock+)-https://github.com/lordodin912/H830-20A-
Thanks again to @jcadduono for the scripts used for compiling as well as the original source! https://github.com/jcadduono/android_kernel_lge_msm8996
Ultra Lite v1 --- Warning--- Not For Everyone---
Basically just wanted to remove whatever I felt like and don't use, you've been warned.
Link:Ultra Lite v1
MD5: 4d005c6d0dc404d257f1a4f7b11e2a1d
Backup:Ultra Lite v1 Backup Files
MD5: 4e68a2c6c4d693d08382466e55456439
Stuff Removed:
\system\app
\AndroidPay
\BookmarkProvider
\Chrome
\CloudPrint
\CtsShimPrebuilt
\Drive
\DriveActivator
\DrmService
\EasterEgg
\EditorsDocsStub
\EditorsSheetsStub
\EditorsSlidesStub
\Facebook_AppManager
\FaceLock
\FidoASM
\FidoAuthenticator
\FidoClient
\Gmail2
\GooglePrintRecommendationService
\GoogleTTS
\Hangouts
\LGAccount
\LGAirDrive
\LGATCMDService
\LGBackupLauncher
\LGDrm
\LGFOTA
\LGMusicShare
\LGSpringCleaning
\LGStk
\LGVRAgent
\Maps
\Music2
\Photos
\PrintSpooler
\QuicksetSDK
\SmartMessagingEngine
\SmartShare
\SmartShareProvider
\talkback
\Upsell
\Videos
\YouTube
\priv-app
\AdaptClient
\BackupRestoreConfirmation
\CloudHub
\CtsShimPrivPrebuilt
\EdenService
\EodEngine
\Facebook_Installer
\GCUV
\GoogleFeedback
\HotwordEnrollment
\LG360Wallpaper
\LGActionManager
\LGAirDriveSetting
\LGApplicationManager
\LGBackup
\LGCalendar
\LGCalendarProvider
\LGConciergeBoard
\LGCover
\LGEasyHome
\LGEmail
\LGExchange
\LGFileManager
\LGIFTTT
\LGLDB
\LGMapUI
\LGMusic
\LGMusicWidget
\LGNLPService
\LGP2pService
\LGPartnerBookmarksProvider
\LGPCSuiteService
\LGQHelp
\LGQHelpService
\LGSignBoard
\LGSignBoardProvider
\LGSignBoardSettings
\LGSmartSharePush
\LGSnapPage
\LGTTSPAService
\LGUpdateCenter
\LGVoiceCare
\LGVoiceRecorder
\LGVRPlayer
\LGWeatherService
\LGWernickeManager
\LGWifiHotspotWidget
\LIAInformant
\LIAS4URecommender
\LicenseProvider
\Lookout
\MyPlacesEngine
\MyPlacesSettings
\NameID
\PromoHelper
\SmartSetting
\Tag
\TMO_MyAccount
\TMO_Simlock
\UnifiedEULA
\Velvet
system\vendor\overlay
\com.lge.appbox.client
\com.lge.concierge
\com.lge.email
\com.lge.lgworld
\com.lge.lifetracker
\com.lge.provider.signboard
\com.lge.qhelp
\com.lge.qmemoplus
\com.lge.qremote
\com.lge.signboard
\com.lge.signboard.settings
\com.lge.sizechangable.weather
\com.lge.sizechangable.weather.platform
\com.lge.sizechangable.weather.theme.optimus
system\etc\mrg_default_forms\ConciergeBoard
system\etc\mrg_default_forms\QvoicePlus
system\etc\permissions\com.lge.fota.xml
& Deleted most ringtones, etc in media. That's it.
These files have not been removed. If you feel like removing NFC for some reason, ha, remove files below manually. Also there are a couple other things that can be removed as well, that I forgot.
app\LgNfc
priv-app\NfcSettings
system\etc\nfc
system\etc\permissions\android.hardware.nfc.hce.xml
system\etc\permissions\android.hardware.nfc.hcef.xml
system\etc\permissions\android.hardware.nfc.xml
system\etc\permissions\com.gsma.services.nfc.xml
system\lib\libLGnfc_config.so
system\lib\libLGnfc_jni.so
system\lib\libnfc_ndef.so
system\lib\libnfc-nxp-nci.so
system\lib\hw\nfc_lg.default.so
Repeat for lib64
system\priv-app\NfcSettings
system\vendor\overlay\com.lge.NfcSettings
Other
system\etc\permissions\com.lge.lgdrm.xml
system\etc\permissions\com.lge.sizechangable.weather.platform.xml
system\etc\recovery-resource.dat
If anyone can find anything more to remove, please share. Want to remove as much as possible, because why not, and prolly missed some libs and stuff.[emoji15]
Can I flash this if I'm on CM right now (with factory reset ofc) or would I need to go through LG Up and flash a vanilla rom first?
M3rsh said:
Can I flash this if I'm on CM right now (with factory reset ofc) or would I need to go through LG Up and flash a vanilla rom first?
Click to expand...
Click to collapse
If you've already upgraded to N (20a), then yes.
Will this work with dualboot? I need stock to play pokemonGo but won't throw root away in my main setup
tavocabe said:
Will this work with dualboot? I need stock to play pokemonGo but won't throw root away in my main setup
Click to expand...
Click to collapse
You can try.
lordodin912 said:
^You can try.
Click to expand...
Click to collapse
I guess it won't work anyway as I see a supersu file in the zip?
EDIT: will try removing it and flashing and see if it works. Thanks!
tavocabe said:
I guess it won't work anyway as I see a supersu file in the zip?
EDIT: will try removing it and flashing and see if it works. Thanks!
Click to expand...
Click to collapse
Remove "rootzip" & "busybox" folders before patching/flashing.
P.S. If you haven't already updated to N(20A) it may not boot regardless.
lordodin912 said:
Remove "rootzip" & "busybox" folders before patching/flashing.
P.S. If you haven't already updated to N(20A) it may not boot regardless.
Click to expand...
Click to collapse
Yeah it didn't boot, I'm still in MM because of xposed. How much of a trouble is to replicate this deodexed rom but on 10j?
tavocabe said:
Yeah it didn't boot, I'm still in MM because of xposed. How much of a trouble is to replicate this deodexed rom but on 10j?
Click to expand...
Click to collapse
You can take the system.img and boot.img from either the kdz with LG Firmware Extractor or from autoprime complete zip.
Then you need to Google "superR kitchen xda", if your using windows there is a VM iso in the thread you can use with VirtualBox etc.
Once you have the kitchen working just remember to use smali for deodexing when it asks and don't sign the zip or let it remove the meta-inf folders from apps, again it will ask.
Once its built, remove the assert from the very top of the updater-script.
Hope you figure it out. If not, maybe tomorrow I can whip it up for ya.
PM me if you have trouble. Ill try to help best I can.
I installed autoprime's 10j complete zip as secondary and it booted fine, unfortunately I couldn't pass safetynet I guess it has something to do with modifying the boot partition, oh well. I'll install your zip as soon as xposed for nougat becomes available.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Stock debloated/deodexed nougat....no tweaks.
Another one, moving on up. Ha. Would like 150,000 though.
tavocabe said:
I installed autoprime's 10j complete zip as secondary and it booted fine, unfortunately I couldn't pass safetynet I guess it has something to do with modifying the boot partition, oh well. I'll install your zip as soon as xposed for nougat becomes available.
Click to expand...
Click to collapse
I think the deal is that its game over if even your bootloader is unlocked.
z28james said:
I think the deal is that its game over if even your bootloader is unlocked.
Click to expand...
Click to collapse
Nah it works fine if I don't touch anything ( i.e. root, dm verity, encryption, xposed, etc.) and leave 100% stock even when bootloader is unlocked
Update: added separate flashable "Modded NotSoStock" kernel.
lordodin912 said:
Update: added separate flashable "Modded NotSoStock" kernel.
Click to expand...
Click to collapse
Can it be used on stock MM 10j?
About to go home and flash ..care to share your kcal values
Sent from my LG-H830 using Tapatalk
tavocabe said:
Can it be used on stock MM 10j?
Click to expand...
Click to collapse
Its for N, so I think its safe to say no.
pilo99 said:
About to go home and flash ..care to share your kcal values
Click to expand...
Click to collapse
In OP.
I flashed and it does run smooth and i like the vibrant color profile ...looking fwd to more tweaks and debloat ...geat job
Sent from my LG-H830 using Tapatalk
Related
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Greetings all S3 users!
Most of you know me from Omega rom thread, where I help users resolve their problems. In this thread I will join all my mods and fixes, accompanied by some usefull general hints.
Should you have any questions/praises/critics, please give me your feedback, either here or through pm.
And don't forget to thank me.
Apps, mods & fixes
Transparent statusbar for S3 (Android 4.1.2)
Transparent statusbar only for 4.1.2, compatible with Omega v47, v48...
I made these flashable zips as backup-reversable. Backups are stored in folder /sdcard/Universal Flasher. Enjoy!
Transparent statusbar - 25%
Transparent statusbar - 50%
Transparent statusbar - 75%
Transparent statusbar - 100%
NOTICE: If you flash these mods with TWRP recovery, your backups will become corrupted. For now I am posting a fixed META-INF folder, that you have to copy-paste into your latest UNDO.zip backup file, then flash it again.
Fix for twrp corrupted backups: http://www.mediafire.com/download/05eovyxdp8xruii/
Transparent statusbar for S3 (Android 4.2.2)
Transparent statusbar only for 4.2.2, compatible with Omega v46.1.
I made this flashable zip as backup-reversable. Backups are stored in folder /sdcard/Universal Flasher. Enjoy!
Transparent statusbar - 100%
NOTICE: If you flash this mod with TWRP recovery, your backup will become corrupted. For now I am posting a fixed META-INF folder, that you have to copy-paste into your latest UNDO.zip backup file, then flash it again.
Fix for twrp corrupted backups: http://www.mediafire.com/download/05eovyxdp8xruii/
Fix for telephone numbers instead of contacts + extra features - Omega v53 (XXUGML2)
(For older 4.1.2 fix, follow this link: http://forum.xda-developers.com/showpost.php?p=35646453&postcount=39138)
This is a possible solution! I say possible because it works for most users, but you might be an exeption. Only way to know for sure, is to flash it in cwm recovery.
If the problem remains, you should remove your Google account, wipe data for Phone.apk and Contacts.apk, reboot and create Google account again.
Another option is to open Contacts app, in the Menu press Import/Export, choose Export and save the *.vcf file. You then delete all your contacts and import the saved *:vcf file back. Similar can be done with other apps: like TitaniumBackup, Go Backup etc.
Removers
These flashable zip files will delete all instances of apps and mods. This way you don't have to full wipe your phone or reinstall a rom.
Note: None of developers' scripts have been changed in making the removers.
AC!D Audio Engine v5.0 Remover
(Also available here:http://forum.xda-developers.com/showpost.php?p=36214740&postcount=41298)
This removes AC!D 5.0 & restores XXEMRG (4.1.2) audio files: http://www.mediafire.com/download/2qeec2tgabq4dsn/AC!DAudioEnginev5.0_remover_XXEMRG.zip
This removes AC!D 5.0 & restores UFME7 (4.2.2) audio files: http://www.mediafire.com/download/26tma5ygrfvrryp/AC!DAudioEnginev5.0_remover_UFME7.zip
Remove AC!D Noozxoide: for 4.1.2 based roms / for leaked 4.2.2 roms
Remove AC!D Awesome Beats: for 4.1.2 based roms / for leaked 4.2.2 roms
Remove AC!D Walkman Player, Clearaudio, Xloud, Clearbass: for 4.1.2 based roms / for leaked 4.2.2 roms
1. Please wipe chache & dalvik cache after you flash the mod to avoid complications.
2. In case you have any force closes of other audio mods (like DSP manager), just reflash them.
3. If you still don't hear camera sounds, remove them from /system/media/audio/ui and flash or push them again, followed by a reboot.
If AC!D Audio Engine v5.0 lines were not added to build.prop, flash this in recovery: http://www.mediafire.com/download/g94yu9ylq1w6m1u/AC!DAudioEngine[v5.0]_add_lines.zip
To make bootanimation/camera sounds work with AC!D Audio Engine, flash this fix: http://www.mediafire.com/download/sniycmx97soaiez/AC!DAudioEnginev5.0_Omega_fix.zip
AC!D Audio Engine v7.0 Remover
This removes AC!D v7.0 & restores XXEMRG (4.1.2) audio files: http://www.mediafire.com/download/x...udio_Engine_v7build_2802r2_remover_XXEMRG.zip
This removes AC!D v7.0 & restores UFME7 (4.2.2) audio files: http://www.mediafire.com/download/4...Audio_Engine_v7build_2802r2_Remover_UFME7.zip
If AC!D Audio Engine v7.0 lines were not inserted in your build.prop file, flash this: http://www.mediafire.com/download/d9mg94g12dkgn5d/AC!DAudioEngine[v7.0]_add_lines.zip
MegaBassBeats v3.0 Remover
Original thread of the MBB mod (my removers works for both versions): V2 / V3
Remover for Stock Samsung Roms (Omega v48 as base): http://www.mediafire.com/download/5s9hoe6nijo0fa1/MegaBassBeatsV3_remover_stock_UBEMH2.zip
Remover for Leaked Samsung Rom (Omega v46.1 as base): http://www.mediafire.com/download/epp49i49cg4div4/MegaBassBeatsV3_remover_stock_UFME7.zip
Remover for AOKP Milestone 2 Roms (Omega v8.1 as base): http://www.mediafire.com/download/2c5kvx4648y8zg1/MegaBassBeatsV3_remover_aokp_milestone2.zip
Pimp my Beats Remover
http://www.mediafire.com/?9dqumxzhd2wm6xd
Remove S-Note v12 for GS3
You installed S-Note (from Galaxy Note 2) on your S3 and don't like it? I'm talking about this: http://forum.xda-developers.com/showthread.php?t=1997286
Depending on which version you installed, use my mods to remove the app and its dependent files:
If you flashed Latest SNote from XXDME1 by Or1m: http://www.mediafire.com/download/3ezq656j9rdv5yo/SNotes_LangPack_CWM_Remover.zip
If you flashed any of the language packs (mini, mega): http://www.mediafire.com/download/t4zdz6vzrrkz7ff/Note2_S-Note_v12_remover.zip
Remove 3Minit Framework Mod
gharrington's OP: MC3/MD2 4.1.2 / ME7 4.2.2
Remover only for Omega v48 (md5: A021F64BD71DC60F240FC45EFD8073A1)
Remover only for Omega v46.x (md5: EF088B4D4734906520247E99B34A4A07)
Tips & tricks
Change CSC
With this method you can set your service provider's CSC (Customer Sales Code) without a full wipe. Similar can be done directly on your phone by using an app (search Google Play), but your phone will be factory reset.
I used DBT csc as an example, because it has feature.xml. Most other csc folders do not, so you can simply copy them as described in the video.
This guide is suitable for any rom, providing you have multi-csc option.
How to copy .obb files to your phone
This video is for anybody, who receives an error when copying .obb files from PC to /Android/obb folder in S3. Apparently it is a 4.2 Android issue and here is how you do it:
Author: TheAndroidMeda
really good job of hero
[FONT="<font><font>Century Gothic</font></font>"][SIZE="<font><font>5</font></font>"]hi bro, congratulations for your excellent work to help us. Whenever I have a problem I see what solution we offer, keep it up bro. greetings from Mexico[/SIZE][/FONT]
Thoughts & ideas
Reserved
Can you add a way to "delete" megabassbeats too?
Appreciated
Re: MMWolverine's mods, tips & tricks
MMWolverine said:
Change CSC
With this method you can set your service provider's CSC (Customer Sales Code) without a full wipe. Similar can be done directly on your phone by using an app (search Google Play), but your phone will be factory reset.
I used DBT csc as an example, because it has feature.xml. Most other csc folders do not, so you can simply copy them as described in the video.
This guide is suitable for any rom, providing you have multi-csc option.
Click to expand...
Click to collapse
Well mate i opened the folder of INU csc n it doesnt contain any file named feature.xml. so how can i change my csc to inu before flashing?
Sent from my GT-I9300 using xda app-developers app
abhibnl said:
Well mate i opened the folder of INU csc n it doesnt contain any file named feature.xml. so how can i change my csc to inu before flashing?
Sent from my GT-I9300 using xda app-developers app
Click to expand...
Click to collapse
Don't worry about feature.xml, you already have it on your phone. Simply drag system folder from INU to the root of the opened zip. Then flash the rom with no wipe.
erto90 said:
Can you add a way to "delete" megabassbeats too?
Appreciated
Click to expand...
Click to collapse
Added to the 3rd post...
Re: MMWolverine's mods, tips & tricks
I installed pimp my beats on omega v40 n now no option to remove it. Just found it's nothing but a modded version of dsp eqializer
Is there any solution without flashing rom again?
Sent from my GT-I9300 using xda app-developers app
Re: MMWolverine's mods, tips & tricks
You can flash pimp my rom rescue package, it should remove beats tweaks, but you will also lose other settings you made. Hopefully I will make a remover only for beats later today.
Sent from my GT-I9300 using Tapatalk 2
Re: MMWolverine's mods, tips & tricks
Tried rescue package mate, but didn't helped.
Edit: tried transparent status bar from vegeta's thread but I guess it isn't updated for omega v40, didn't worked at all. Worked fine for v39 though. Can you provide any flashable zip for 100% system transparency bro?
Sent from my GT-I9300 using xda app-developers app
abhibnl said:
Tried rescue package mate, but didn't helped.
Edit: tried transparent status bar from vegeta's thread but I guess it isn't updated for omega v40, didn't worked at all. Worked fine for v39 though. Can you provide any flashable zip for 100% system transparency bro?
Sent from my GT-I9300 using xda app-developers app
Click to expand...
Click to collapse
I added remover to 3rd post.
Regarding 100% transparency, did you flash from here?: http://forum.xda-developers.com/showpost.php?p=30465102&postcount=3
First you need vegeta's modified SystemUI for v40, then flash transparend bar.
Also look here: http://forum.xda-developers.com/showpost.php?p=34200119&postcount=3
Re: MMWolverine's mods, tips & tricks
MMWolverine said:
I added remover to 3rd post.
Regarding 100% transparency, did you flash from here?: http://forum.xda-developers.com/showpost.php?p=30465102&postcount=3
First you need vegeta's modified SystemUI for v40, then flash transparend bar.
Also look here: http://forum.xda-developers.com/showpost.php?p=34200119&postcount=3
Click to expand...
Click to collapse
Yup mate tried from same thread by vegeta. First installed systemui.apk then 100% transparency mod. But didn't worked at all. Didn't tried the other thread though.
Sent from my GT-I9300 using xda app-developers app
Re: MMWolverine's mods, tips & tricks
MMWolverine said:
I added remover to 3rd post.
Regarding 100% transparency, did you flash from here?: http://forum.xda-developers.com/showpost.php?p=30465102&postcount=3
First you need vegeta's modified SystemUI for v40, then flash transparend bar.
Also look here: http://forum.xda-developers.com/showpost.php?p=34200119&postcount=3
Click to expand...
Click to collapse
You're becoming quite the uninstaller here. Thanks for all your help around here. I hate it when devs leave users hanging without an uninstaller. To me, that's just irresponsible. Again, thanks for your help!
Hi Buddy, I know this is not the right place to ask this question, but believe me, I searched for a solution for my problem everywhere. And this is related to 7-zip archiving software. 7-zip was working fine for me all theses last few months since I installed it. But now, it does not allow me to modify any .zip archives. It comes up with the error "not implemented" while trying to insert or delete any file(s) from any .zip archive using 7-zip. Have you ever faced this issue? I have searched 7-zip forums and the official site for any clue. They all discuss about removal of "solid mode" for .7z format, nothing for .zip format.
I am asking you since you are using archiver on a daily basis and perhaps you have some experience with 7-zip... Please point me to some solution, if you can...
Well at the moment I'm using winrar and winmount. I've also tried 7zip portable version and it didn't give me any issues modifying zips. Did you maybe try unistalling 7zip and reinstalling it? Other than that at the moment I don't know a solution, will look around for any info I may find.
MMWolverine said:
Well at the moment I'm using winrar and winmount. I've also tried 7zip portable version and it didn't give me any issues modifying zips. Did you maybe try unistalling 7zip and reinstalling it? Other than that at the moment I don't know a solution, will look around for any info I may find.
Click to expand...
Click to collapse
Hi, thanks for the feed back. I think my issue was specific to one particular file. I upgraded my 7-zip to the latest beta and was able to edit some other zip files, and not this one. And yet, I am able to modify even this file using winrar. My concern with 7-zip started when it failed to let me modify a zip file which I was able to, before.
:good: It would be great if you can do Remover also for MegaBassBeats V2 !
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Hi! I want to share my mod and I hope it will be useful to someone!
FEATURES
1. Based on CyanogenMod.
2. One ROM for the two devices: Galaxy S I9000 and Captivate I897.
3. ROM is based on the AROMA installer, you can choose the necessary kernel, modem, additional apps and other options:
Kernel:
Semaphore JB.
Devil Kernel.
CyanCore.
Modem:
Galaxy S I9000 - JW4, JVU or ZSJPG.
Captivate I897 - UGKG3, BVJJW2 or TUBJV6.
Launcher:
Nova Launcher.
TouchWizUX.
Trebuchet.
Bootanimation:
CyanogenMod 10.2.
Jelly Bean.
Galaxy S.
Nexus.
Apps:
Samsung: SamsungApps.
Themes: TouchWiz 4.5, UBER Jelly, BlackedOut Black, MIUIv4 by Z25, MIUI Dark, MIUI Holo.
Google: YouTube, Maps, Street view, Hangouts, Google Chrome, Google Keyboard, Google Keep.
Useful apps: Adobe Flash Player, MX Player, ES Explorer, Screen Off and Lock, Feedly, Titanium Backup, Smart Voice Recorder.
Additional options:
Swap on zRam (for CyanCore only).
CrossBreeder (RNGD Havege only).
ViPER4Android FX.
Die-Hard launcher (from V6 Supercharger).
OpenPDroid patch.
Face Unlock.
GPS conf - you can choose your country for installing the best configuration.
4. Deleted apps: Apollo.apk, CMFileManager.apk, CMUpdater.apk (replaced with OTA Updater), SoundRecorder.apk, Term.apk, VoiceDialer.apk, VoicePlus.apk.
5. Added apps: Google Play Books, Google Play Games, Google Play Movies, Google Play Music, Voodoo Sound.
6. Added Gapps (updated if possible).
7. Hugemem patch.
8. Tweaks, addons:
Build.prop tweaks.
CrossBreeder tweaks (optional, RNGD Havege only).
Zipalign and Fix permissions (from V6 SuperCharger) will run weekly by crond.
Detailing (from V6 SuperCharger) will run daily by crond.
Drop caches will run every 3 hours by crond.
Battery will be calibrated once after the first charge to 100%.
GPS fix.
9. You can receive updates via OTA Updater.
Click to expand...
Click to collapse
DISCLAIMER
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
By using the rom you agree with the above terms!
Click to expand...
Click to collapse
Q/A
Q. How to install this ROM?
A. To install ROM:
1. Be sure you have installed any ROM with CyanogenMod 10.2 partition layout at now, e.g. CyanogenMod 10.2, if you are not sure just flash CyanogenMod 10.2.
2. Backup your data! All data will be wiped!
3. Put zip file to /sdcard, reboot to recovery and choose install zip from sdcard -> choose zip from sdcard and select zip file - AROMA installer wil be started.
4. Follow installation wizard instruction.
Q. Why is this ROM so big?
A. Because it includes many kernels, modems, apps etc., but you can choose only necessary ones.
Click to expand...
Click to collapse
INSTALLATION SCRENSHOTS (MAY VARY IN ACTUAL INSTALLATION)
Click to expand...
Click to collapse
Download from Android File Host
Click to expand...
Click to collapse
MD5:
c74923f0ffcb498c850b2525d3886161 *Optimum JellyBean by Likeman v.6.1.zip
CREDITS
CM developers
stratosk
DerTeufel1980
ts1506
Chainfire
amarullz
zeppelinrox
idcrisis
pikachu01
mateorod
FFU5y
ViPER520 and zhuhang
thomassafca
Fabian Cruz
Mr.Nigma...
Blackout1911
ZduneX25
jasonevil
Android File Host project
OTA-UpdateCenter.pro project
Click to expand...
Click to collapse
CHANGELOG
v.6.1
Base updated to CyanogenMod 10.2.1.
I/O, VM tweaks corrected a little.
ViPER4Android FX updated to v.2.3.2.2. Fixed a glitch that caused driver installation when you first start the app.
Apps updated, stock Calendar.apk and Email.apk returned, CMUpdater.apk replaced with OTA Updater.
System partition cleaned once again.
v.6.0
Base updated to CyanogenMod 10.2.0.
Kernels updated to the latest versions.
CrossBreeder Ads- feature replaced (temp) with hosts file. RNGD Havege updated. Added some I/O, VM tweaks.
GPS is working a bit better - little more satellites, little higher signal level.
Beats replaced with ViPER4Android FX.
Zipalign, Fix permissions and Detailing scripts updated.
System partition cleaned once again.
Apps updated.
v.5.3
Base updated to CyanogenMod 10.1 20130804 nightly.
Fixed the bug with 720p video recording.
Fixed the bug with SMS sending (by CM developers).
Fixed the bug with Wi-Fi at Devil kernel.
Kernels updated to the latest versions.
CrossBreeder Ads- list updated.
System partition cleaned once again.
Apps updated.
v.5.2
Base updated to CyanogenMod 10.1 20130712 nightly (includes all the latest security patches).
Kernel and I/O tweaks replaced to CrossBreeder.
Kernels updated to the latest versions.
Now drop caches will run daily.
System partition cleaned up a bit.
Added MIUI Dark and MIUI Holo themes.
Apps updated.
v.5.1
Base updated to CyanogenMod 10.1 20130624 nightly.
No more support for Vibrant T959 (size is reduced a little)
Kernels updated to the latest versions.
No more LMK from V6 Supercharger (stock values are better).
Kernel and I/O tweaks changed a little.
OpenPDroid patch added.
Face Unlock installation is optional now, not available for Captivate I897.
Now drop caches will run every 12 hours.
Hangouts installation is optional now (because it's big and laggy).
If you didn't choose ES Explorer in installation wizard CM Filemanager will be installed.
Apps updated.
v.5.0
First release at XDA.
Click to expand...
Click to collapse
Reserved
Hey Likeman, thanks for sharing your work! :good:
Is the ROM itself any different than CM10.1 RC4?
Re: Optimum Jellybean v.5.0
a-id said:
Click to expand...
Click to collapse
Thanks for another ROM to try, downloading now
Sounds very well, thanks for giving us a New rom
Sent from my SGH-I897 using xda app-developers app
another new rom for our cappy:laugh:
happy to try it
and by the way, it is the first with aroma installer
I was a little skeptical about this ROM at first but I'm glad I tried it. It has been pretty good so far not to mention the fact that I could customize the ROM in a way that cm10.1 for example won't let you during installation. As far as performance I can see no notable difference between this and cm10.1. Maybe a little faster. Anyways great ROM much appreciated!
Val D. said:
Hey Likeman, thanks for sharing your work! :good:
Is the ROM itself any different than CM10.1 RC4?
Click to expand...
Click to collapse
No, it has no any difference in code, almost all of the changes listed in the features.
mx828 said:
I was a little skeptical about this ROM at first but I'm glad I tried it. It has been pretty good so far not to mention the fact that I could customize the ROM in a way that cm10.1 for example won't let you during installation. As far as performance I can see no notable difference between this and cm10.1. Maybe a little faster. Anyways great ROM much appreciated!
Click to expand...
Click to collapse
Thanks for sharing your thoughts!
a-id said:
No, it has no any difference in code, almost all of the changes listed in the features.
Click to expand...
Click to collapse
OK, your package basically offers custom installation of CM 10.1 RC4, correct?
Val D. said:
OK, your package basically offers custom installation of CM 10.1 RC4, correct?
Click to expand...
Click to collapse
Basically, yes, it does, but not completely, if you need completely original CM, you have to flash CM and what you need else (kernel, modem etc).
a-id said:
Basically, yes, it does, but not completely, if you need completely original CM, you have to flash CM and what you need else (kernel, modem etc).
Click to expand...
Click to collapse
I'm trying to figure out why I need to download this >500MB universal package if I already have RC4 running (as per instructions). All I need to do is to download and flash my preferred kernel, modem, gapps, bootanimation, etc... a total of 50MB or less. In other words, starting from RC4 after Optimum JellyBean installation I'm going to have this same RC4 with very same configuration I prefer. It does make sense only in case the user is not very comfortable with flashing kernel, modem, etc. In the same time this inexperienced user is expected to flash a kernel (as recommended) in order to proceed with installation, also to know what exactly he wants to have and select it during installation process. As I understand, this package is not a new ROM. It's user-friendly (kind of) custom installation of CM 10.1 RC4. It is good though, I've tried it and it works. Thanks again!
:good:
Val D. said:
I'm trying to figure out why I need to download this >500MB universal package if I already have RC4 running (as per instructions). All I need to do is to download and flash my preferred kernel, modem, gapps, bootanimation, etc... a total of 50MB or less. In other words, starting from RC4 after Optimum JellyBean installation I'm going to have this same RC4 with very same configuration I prefer. It does make sense only in case the user is not very comfortable with flashing kernel, modem, etc. In the same time this inexperienced user is expected to flash a kernel (as recommended) in order to proceed with installation, also to know what exactly he wants to have and select it during installation process. As I understand, this package is not a new ROM. It's user-friendly (kind of) custom installation of CM 10.1 RC4. It is good though, I've tried it and it works. Thanks again!
:good:
Click to expand...
Click to collapse
Yes, you're right this package is not a new ROM, it's custom installation of CM 10.1 RC4 with tweaks, some patches (libsqlite.so, services,jar, systemui.apk) and useful automated functions (zipalign, detailing, drop caches which is running by crond).
Re: Optimum Jellybean v.5.0 install
Hi Likeman, I would like to share that I was having issues with the Aroma installer aborting because I had wiped my /system before starting the installation. I had to do an advanced Nandroid restore of a System folder and then the Aroma installer proceeded correctly. I had been receiving an error "Installation wizard has found that you have an incompatible ROM!" until I had /system in place, and then I properly received "Detected Samsung Captivate SGH-i897, is this correct?" Perhaps you could add to the OP that wiping /system before install is not recommended?
Thanks again, I am trying out the ROM now
They Drew First Blood said:
Hi Likeman, I would like to share that I was having issues with the Aroma installer aborting because I had wiped my /system before starting the installation. I had to do an advanced Nandroid restore of a System folder and then the Aroma installer proceeded correctly. I had been receiving an error "Installation wizard has found that you have an incompatible ROM!" until I had /system in place, and then I properly received "Detected Samsung Captivate SGH-i897, is this correct?" Perhaps you could add to the OP that wiping /system before install is not recommended?
Thanks again, I am trying out the ROM now
Click to expand...
Click to collapse
I think there is no need to wipe /system anyway because when you flash any ROM (with or without wipe) /system partition will be formated anyway. You got that message because AROMA installer wasn't be able to detect what ROM version you were using. I think I need to find another way to detect is the original ROM compatible. Thanks for sharing your experience!
Re: Optimum Jellybean v.5.0
They Drew First Blood said:
Thanks again, I am trying out the ROM now
Click to expand...
Click to collapse
I see that Face Unlock is running- Captivates do not have a front-facing camera
They Drew First Blood said:
I see that Face Unlock is running- Captivates do not have a front-facing camera
Click to expand...
Click to collapse
You're right, I'll correct the behavior of the installer in the next version of AROMA configuration.
What's the bugs in this Build ??
Master-ZizO said:
What's the bugs in this Build ??
Click to expand...
Click to collapse
All the bugs CM 10.1 RC4 has (if it has)
Отправлено с моего GT-I9000 через Tapatalk
a-id said:
All the bugs CM 10.1 RC4 has (if it has)
Отправлено с моего GT-I9000 через Tapatalk
Click to expand...
Click to collapse
i don't know what is the bugs in cm10.1 rc4 ... please tell me
i am on GB 2.3.5 ..... in ur opinion JB is laggy or its good ?
Master-ZizO said:
... in ur opinion JB is laggy or its good ?
Click to expand...
Click to collapse
In my opinion CM10.1 RC4 is more stable than your stock Samsung ROM.
There is no comparison between JB and GB. JB is better in every single detail, including speed.
Introduction
Hello everyone,
As we all know, performance in CM11 isn't good when compared to stock. I was wondering why, so I started searching the internet. I searched for real improvements, not mostly placebo init.d or build.prop tweaks. I found some really neat things, so I want to share them with the xda community.:good:
Click to expand...
Click to collapse
Improvements:
- Dalvik perfomance boost
- a little GPU performance boost
- increased smoothness( mostly in games)
Results may vary between phones.
Click to expand...
Click to collapse
Let's get started!
Warning! Don't flash anything from this thread unless you have CM11 installed on your phone!
Click to expand...
Click to collapse
I am going to update the post with more explanations, etc.
Click to expand...
Click to collapse
1.Dalvik performance boost
1. Download this: http://forum.xda-developers.com/attachment.php?attachmentid=2620732&d=1394316359
2. Mount /system and flash via recovery.
3. Important! Wipe cache and dalvik cache after flashing!
Now we have optimized Dalvik, so our phone's performance will be a lot better.
Click to expand...
Click to collapse
2. GPU performance boost
1. Download this: https://mega.co.nz/#!6YxCXbSa!4_lERzfyXFs7IgQv3A4LOXCwq3nW337icJIAYEdQxYU
2. Mount /system and flash with your favourite recovery.
The performance boost isn't big, but it should be noticeable under heavy load.
Click to expand...
Click to collapse
3. Another GPU performance boost
This part is really weird, and theoretically shouldn't do anything. I found it when I decided to try GTA:SA in 1080p on our phones. I thought it will totally murder the performance. I was wrong.
Click to expand...
Click to collapse
1. Open terminal emulator.
2. Type:
Code:
su
wm size 720x1280
You can use other values like 1080x1920. I'm still trying to figure out why it boosts the perfomance, so it should be considered as experimental.
Credits/thanks to
@kszaq for this thread http://forum.xda-developers.com/nexus-4/general/4-4-4-4-x-qualcomm-optimized-dalvik-t2546120
- CyanogenMod team for Nexus 4 CM nightlies
- Polish android community for testing
- Sony for sources and making our Xperia SP
- FXP team, AdFad666, uberlaggydarwin and all the other people who created CM11 for our device
I've tried new Adreno drivers but they keep the screen flickering while loading the ROM and then, the ROM doesn't load.
EDIT: I think the proper version for our SP's is this: http://forum.xda-developers.com/nexus-4/general/qualcomm-adreno-gpu-binaries-t2667759 (Disclaimer: I haven't tried it yet)
lanluckez said:
I've tried new Adreno drivers but they keep the screen flickering while loading the ROM and then, the ROM doesn't load.
EDIT: I think the proper version for our SP's is this: http://forum.xda-developers.com/nexus-4/general/qualcomm-adreno-gpu-binaries-t2667759 (Disclaimer: I haven't tried it yet)
Click to expand...
Click to collapse
I flashed the adreno drivers on 4.4.2 slimkat for locked bootloader and it's working fine
Sent from my C5303 using XDA Free mobile app
noahvt said:
I flashed the adreno drivers on 4.4.2 slimkat for locked bootloader and it's working fine
Sent from my C5303 using XDA Free mobile app
Click to expand...
Click to collapse
What drivers. Nexus 5? Nexus 4?
Tried both and anyone worked for me. Just keep booting forever.
To be sure it worked you have to check the files within filesystem and compare with the files in the .zip. Both must be same.
I have a pre-rooted 4.3 rom.Can I install adreno drivers on top?
If yes how?
UltraWelfare said:
I have a pre-rooted 4.3 rom.Can I install adreno drivers on top?
If yes how?
Click to expand...
Click to collapse
You don't need to install them as they are already installed because you're using the stock rom
@lanluckez
I don't know why Adreno drivers aren't working for everyone. They were tested on SlimKat, Vanir, CM11 LBL and CM11 and they were working fine. Drivers from that thread you linked won't work (for now, because they require some changes in display libs).
MrSteve555 said:
@lanluckez
I don't know why Adreno drivers aren't working for everyone. They were tested on SlimKat, Vanir, CM11 LBL and CM11 and they were working fine. Drivers from that thread you linked won't work (for now, because they require some changes in display libs).
Click to expand...
Click to collapse
You're right, mate. Sorry.
But the thing is... I looked over the drivers included in the latest CM package and in SlimKat and I've found the drivers are already updated.
lanluckez said:
You're right, mate. Sorry.
But the thing is... I looked over the drivers included in the latest CM package and in SlimKat and I've found the drivers are already updated.
Click to expand...
Click to collapse
Yeah, you're right. These drivers are already included in locked bootloader KitKat ROMs. Idk if they are updated in unlocked BL versions, because I have my bootloader forever locked by my carrier.
noahvt said:
You don't need to install them as they are already installed because you're using the stock rom
Click to expand...
Click to collapse
Oh okay...I thought there was something like a "developer" or "test" drivers to install :silly:
MrSteve555 said:
Yeah, you're right. These drivers are already included in locked bootloader KitKat ROMs. Idk if they are updated in unlocked BL versions, because I have my bootloader forever locked by my carrier.
Click to expand...
Click to collapse
Also updated in cm11 based carbon rom (ubl).
@MrSteve555
Do you have any idea where this "16bit transparency" setting is saved to? (CM11-LBL; in "Performance" tab). Maybe any build.prop setting to change it?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I'm asking this because, in slimkat-lbl the gaming quality looks like as if this 16bit setting is on (by default), and no "performance" tab in slimkat to switch it off. As you seem to have much knowledge about the sources I thought I'd ask from you. Appreciate your input. Thanks.
@mrhnet
You can try adding this:
Code:
persist.sys.use_dithering=0
to your build.prop.
Or, if you want to do it in more clean clean way, you can make an init.d script with this:
Code:
#!/system/bin/sh
#disable 16bit dithering
setprop persist.sys.use_dithering 0
If I want to use stock ROM again,what to do?
I mean to say,again some files related gpu I have to flash for stock ROM?
Sent from my C5302 using XDA Premium 4 mobile app
MrSteve555 said:
@mrhnet
You can try adding this:
Code:
persist.sys.use_dithering=0
to your build.prop.
Or, if you want to do it in more clean clean way, you can make an init.d script with this:
Code:
#!/system/bin/sh
#disable 16bit dithering
setprop persist.sys.use_dithering 0
Click to expand...
Click to collapse
Thanks for the tip! Your suggestion prompted me to search a bit, and found this.. http://review.cyanogenmod.org/#/c/19567/
No idea what it means, but applying your settings didn't seem to change things. There it's mentioned "branch:jellybean", so dunno whether it's not there in CM11?
**(Is there any way to search through the sources without downloading it??)
Anyway found another setting..
Code:
persist.sys.use_16bpp_alpha=1
And it's mentioned here... https://github.com/chenxiaolong/CM_...settings/cyanogenmod/PerformanceSettings.java
And in CM-11(LBL), changing "16bit transparency" setting changes this (checked with getprop) :victory:
I'm yet to test this in Slimkat.. Thanks for your idea bro!
[Highlight]Edit:[/highlight] In addition to the 16bit setting, the above dithering setting does cause a change in graphics quality. Setting it to 2 results in awesome graphics; eg:can see a clear difference on the car/windshield reflection quality (asphalt8, maxed). Maybe this is the High Quality graphics setting which is there in cm11-UBL.
Ankit Gajera said:
If I want to use stock ROM again,what to do?
I mean to say,again some files related gpu I have to flash for stock ROM?
Sent from my C5302 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
No need. Just flash the ROM as usual.
mrhnet said:
No need. Just flash the ROM as usual.
Click to expand...
Click to collapse
Okay...Thanks.
Root with CM 11
Hi everyone,
First of all sorry if it's not the correct section to post my thread.
I've just flashed the CM 11 on my sony xperia sp and now I'd like to root it (I've the bootloader unlocked).
How can I root my xperia?
thank you
mrhnet said:
Thanks for the tip! Your suggestion prompted me to search a bit, and found this..
Anyway found another setting..
Code:
persist.sys.use_16bpp_alpha=1
And it's mentioned here... https://github.com/chenxiaolong/CM_...settings/cyanogenmod/PerformanceSettings.java
And in CM-11(LBL), changing "16bit transparency" setting changes this (checked with getprop) :victory:
I'm yet to test this in Slimkat.. Thanks for your idea bro!
[Highlight]Edit:[/highlight] In addition to the 16bit setting, the above dithering setting does cause a change in graphics quality. Setting it to 2 results in awesome graphics; eg:can see a clear difference on the car/windshield reflection quality (asphalt8, maxed). Maybe this is the High Quality graphics setting which is there in cm11-UBL.
Click to expand...
Click to collapse
hi all .. I made this manipulation but my xperia sp with the Roma slimKat, Does not start Properly .. it stuck on the logo. you managed to do it, you?
Envoyé de mon C5303 en utilisant Tapatalk
NYGGAZ said:
hi all .. I made this manipulation but my xperia sp with the Roma slimKat, Does not start Properly .. it stuck on the logo. you managed to do it, you?
Envoyé de mon C5303 en utilisant Tapatalk
Click to expand...
Click to collapse
I've tried all the setting combinations (16bit on/off with dithering 0/1/2), on SlimKat-LBL, but didn't have a problem like that. (I usually keep a cwm /system backup before editing build.prop or other meddling). You edited build.prop or applied via a script?
---------- Post added at 11:38 PM ---------- Previous post was at 11:36 PM ----------
RicoSpampi said:
Hi everyone,
First of all sorry if it's not the correct section to post my thread.
I've just flashed the CM 11 on my sony xperia sp and now I'd like to root it (I've the bootloader unlocked).
How can I root my xperia?
thank you
Click to expand...
Click to collapse
Cm11 is pre-rooted. Just have to use it
Here's a very short guide how I managed to install XPosed on M9+ on S-on. On s-off don't try, it bootloops, no fix found that for yet, you must be s-on
It's not with latest release by rovo, I didnt try it yet at all. But anyway, here's what I did.
First of all, you take all responsibility if following this guide, installing these things on your phone.
Second I have no credit regarding the framework or anything, so I'm just sharing how it worked out for me. All credits to rovo86.
Third: make a damned backup in custom recovery before even bothering installing it
Had an odexed ROM on my phone, and it worked. So e.g. CleanSlate 1.1 I had installed, without deodexation.
Downloaded:
xposed-sdk21-arm64-20150430.zip
XposedInstaller_3.0-alpha2.apk
From custom recovery (TWRP), I installed the framework xposed-sdk21-arm64-20150430.
Then rebooted. After about 30 minutes of App optimization with a dozen or more soft and hard reboots, the process finished with the optimization and phone started.
Then I installed the alpha2 3.0 XposedInstaller APK from file manager (Unkown Sources enabled).
Then started it, Downloaded a mod, ticked it and soft rebooted from Xposed installer. Then it was showing that the XPosed bridge is working fine and I could install mods and they mostly work.
- Unfortunately Sense Toolbox 2.0 for Sense 7.0 does not start because M9+ has another framework structure than M9 Android 5.0.2. The com.htc.resources.apk is gone, and thus the mod cannot work.
- Xtended Settings do work most parts, no crashes, very good!
- Sygic crashes with XPosed, you need to install an older version of Sygic to avoid crashes with XPosed, download APK here: http://forum.xda-developers.com/xposed/xposed-lollipop-sygic-causing-problems-t3114229/page4
That's all.
All credits to @rovo89
Also check out Sense Toolbox 2.1.1+, it's a perfect completion of customized Sense 7 experience on m9+
===========
UPDATE: tried latest installer from official thread http://forum.xda-developers.com/showthread.php?t=3034811 (xposed-v66-sdk21-arm64.zip - [(5.55 MB, 250 views) and XposedInstaller_3.0_alpha4.apk - (611.8 KB, 72418 views)
it works, but same VERY slow process after installation of framework, optimization takes about 1 HOUR with countless soft and hard reboots.
Known issue (with these alphas, and latest too): Sygic is crashing with XPosed installed
Does it work xtended settings
cimbom said:
Does it work xtended settings
Click to expand...
Click to collapse
i've since removed XPosed since I want to use Sygic in the coming days.
Maybe someone else can try and answer.
Probably it might work partially, and at least it will start, because it's using stock android UI for the settings part, while Sense Toolbox is using HTC framework and does not start on Android 5.1 HTC M9 and Android 5.0.2 M9+ (because of the missing com.htc.resources.apk).
I may try it later tho when I get back from this vacation in about a week, if no one else tries till then. I'm curious too
tbalden said:
i've since removed XPosed since I want to use Sygic in the coming days.
Maybe someone else can try and answer.
Probably it might work partially, and at least it will start, because it's using stock android UI for the settings part, while Sense Toolbox is using HTC framework and does not start on Android 5.1 HTC M9 and Android 5.0.2 M9+ (because of the missing com.htc.resources.apk).
I may try it later tho when I get back from this vacation in about a week, if no one else tries till then. I'm curious too
Click to expand...
Click to collapse
Actually i've tried it, i was too curious, and Xtended Settings does work Installed latest from here too: XPosed http://forum.xda-developers.com/showthread.php?t=3034811 (new installers compared to the ones i detailed in my original how-to.
Anyway, Sygic still crashes with the new version
Actually now I've reverted Sygic back to this version here: http://forum.xda-developers.com/xposed/xposed-lollipop-sygic-causing-problems-t3114229/page4 and it works without crash. Turned out Auto update for sygic in play store. Xtended Settings seems to be so good, it's worth the wait with the old sygic version
If you actually install Xposed framework: on an odexed rom (like CleanSlate 1.1) this time it took me about an HOUR till it finished the optimization process (many soft and hard reboots), but after that I have no issues, apart from the fact that it always Optimizes 3 packages on every reboot, but that's not too much time...annoying, but it's bearable, if you really like XPosed
tbalden said:
I may try it later tho when I get back from this vacation in about a week, if no one else tries till then. I'm curious too
Click to expand...
Click to collapse
Have a nice vacation. Relax it. Take more photos.........
tbalden said:
Actually i've tried it, i was too curious, and Xtended Settings does work Installed latest from here too: XPosed http://forum.xda-developers.com/showthread.php?t=3034811 (new installers compared to the ones i detailed in my original how-to.
Anyway, Sygic still crashes with the new version
Actually now I've reverted Sygic back to this version here: http://forum.xda-developers.com/xposed/xposed-lollipop-sygic-causing-problems-t3114229/page4 and it works without crash. Turned out Auto update for sygic in play store. Xtended Settings seems to be so good, it's worth the wait with the old sygic version
If you actually install Xposed framework: on an odexed rom (like CleanSlate 1.1) this time it took me about an HOUR till it finished the optimization process (many soft and hard reboots), but after that I have no issues, apart from the fact that it always Optimizes 3 packages on every reboot, but that's not too much time...annoying, but it's bearable, if you really like XPosed
Click to expand...
Click to collapse
thanx bruh
before i start goin crazy and lead my phone to sh*t... i wanted to ask
u flashed arm64 right?
and the xposed apk same as before alpha 2?
T3snake said:
thanx bruh
before i start goin crazy and lead my phone to sh*t... i wanted to ask
u flashed arm64 right?
and the xposed apk same as before alpha 2?
Click to expand...
Click to collapse
Just use the ones here: http://forum.xda-developers.com/showthread.php?t=3034811 and yes arm64, sdk 21
And be prepared for an hour of watching optimization going on with reboot after reboot... but in the end it finished and worked for me
yvtc75 said:
Have a nice vacation. Relax it. Take more photos.........
Click to expand...
Click to collapse
Yes I'm taking, and it's amazing... don't know why I was sceptic.. with a little care cam is doing a fantastic job
tbalden said:
Just use the ones here: http://forum.xda-developers.com/showthread.php?t=3034811 and yes arm64, sdk 21
And be prepared for an hour of watching optimization going on with reboot after reboot... but in the end it finished and worked for me
Click to expand...
Click to collapse
Is the optimization reboot effect caused by the ROM (CleanSlate) being Odexed? Am just curious as most ROM's (all I have used) have been Deodexed on past devices.
Would be interested to see if a Deodexed version of CleanSlate ROM would have the same effect when installing Xposed?
Bit of a noob when it comes to Odexed and Deodexed ROM's and it might just be a hardware thing on the M9+ but I'm reading up to learn more.
Cheers
Sent from my HTC One M8x using Tapatalk.
Sojourner353 said:
Is the optimization reboot effect caused by the ROM (CleanSlate) being Odexed? Am just curious as most ROM's (all I have used) have been Deodexed on past devices.
Would be interested to see if a Deodexed version of CleanSlate ROM would have the same effect when installing Xposed?
Bit of a noob when it comes to Odexed and Deodexed ROM's and it might just be a hardware thing on the M9+ but I'm reading up to learn more.
Cheers
Sent from my HTC One M8x using Tapatalk.
Click to expand...
Click to collapse
No. On deodexed same but I hit more issues, for example facebook force closed with my deodexed rom (didn't check if it's because of xposed) Anyway it reboots many times on the deodexed too while optimization goes on. Most probably HTC MTK framework specific issue
If u have xposed installed
this will help http://forum.xda-developers.com/android/general/guide-extreme-battery-life-t3095884
T3snake said:
If u have xposed installed
this will help http://forum.xda-developers.com/android/general/guide-extreme-battery-life-t3095884
Click to expand...
Click to collapse
The Sony like mod looks quite promising. My friend has a z3 compact and it lasts 3-5 days. Incredible.
Have you tried that?
Sense toolbox 2.1 out, compatible with m9+ framework (material design fallback)
Sense toolbox in action
5 rows sense Home, transparent google now.
5X6 app drawer with no footer
Blinkfeed without dock
Perfect notification bar mod like battery icon with percentage
And many more
Just donated to the developer for bringing the greatest sense customization to sense 7 and m9+
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
tbalden said:
The Sony like mod looks quite promising. My friend has a z3 compact and it lasts 3-5 days. Incredible.
Have you tried that?
Click to expand...
Click to collapse
Yes tho sot drain still exists when the screen is off the battery lasts much longer than before
---------- Post added at 02:36 AM ---------- Previous post was at 02:27 AM ----------
tbalden said:
Sense toolbox in action
5 rows sense Home, transparent google now.
5X6 app drawer with no footer
Blinkfeed without dock
Perfect notification bar mod like battery icon with percentage
And many more
Just donated to the developer for bringing the greatest sense customization to sense 7 and m9+
Click to expand...
Click to collapse
For me the home screen grid and hide dock on blinkfeed arent working...
Urs is beta version or the stable version?
T3snake said:
For me the home screen grid and hide dock on blinkfeed arent working...
Urs is beta version or the stable version?
Click to expand...
Click to collapse
Had to do a full reboot and it started to work. Soft reboot was not enough.
I'm using 2.1.1 latest, I think it is a stable version
tbalden said:
Had to do a full reboot and it started to work. Soft reboot was not enough.
I'm using 2.1.1 latest, I think it is a stable version
Click to expand...
Click to collapse
Mine is the stable 1 (last update)
Didnt try full reboot. Thnx
Btw did u need to toggle selinux to permissive?
Or are all the modules workin w/o it
T3snake said:
Mine is the stable 1 (last update)
Didnt try full reboot. Thnx
Btw did u need to toggle selinux to permissive?
Or are all the modules workin w/o it
Click to expand...
Click to collapse
i have SElinux Enforcing. I don't like the idea of permissive for security reasons, so I'm glad they work. Im using PowerNap , Sense Toolbox and Youtube mods
tbalden said:
i have SElinux Enforcing. I don't like the idea of permissive for security reasons, so I'm glad they work. Im using PowerNap , Sense Toolbox and Youtube mods
Click to expand...
Click to collapse
SENSE TOOLBOX
APPOPS
POWERNAP
GREENIFY
AMPLIFY
COOLIFY FLAT
my modules
Hello M.F.s(Mix Fans)
I've been using the latest Marsmallow based Epic rom for a long time, which is quite enough to be having beloved Xposed. So call it boredom or BS, I've managed to get Dual-boot patcher work on my mix although figuring it out was a PITA. Before you think like 'Mayte wot the fooh is Dual boot ey?' >>here<< is it's site that you can getcho arse up and take a quick look and download the
>> Dual boot patcher APK( Working one for me is 9.2.0.r230.g2a0b58a9 Fri, 14 Jul 2017 21:12:40 -0400, latest one FC's)
>> Dual boot Utilities ZIP(To be able to switch roms through TWRP)
NOTE: So before you doing anything crazy like trying this app, you must know:
>>>>Your device must be Decrypted. If it's encrypted, not even a single fuğk for you today.
>>>> Take the responsibility of doing this kind of sh1t. I am nobody.
>>Here<< is the original thread that you can read(I know you won't) and smash the thanks buttons(you won't too) of the beloved developer if you feel like. Either way I'm gonna show how i get it done:
Launch the DBP(Dual Boot Patcher) APK, give the Root acces and permissons,
[*]Tap to MENU button on the top left or right(Im using RTL Layout), > Select ROMs,
IMPORTANT TIP: If the app crashes when you tap ROMs; Just go Patch zip file tab and patch any zip file no matter what(a little sized zip file just to avoid crash of ROMs tab)
[*]Once you get there, it will ask for setting the Kernel, tap to SET NOW,
[*]Tap to 3 dots menu button right next to Primary rom,
[*]Tap to UPDATE RAMDISK then reboot the device,
[*] Launch the DBP again, MENU > Patch Zip File > Choose your rom zip from where you placed it,
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
[*]Change Partition configuration as DATA SLOT and type a name and tap to CONTINUE (I've tried Secondary, Multi Slot 1 etc, couldn't make it work)
[*]SAVE the patch zip somewhere, tap to CHECK/TICK button on the corner to patch it,
[*]MENU > ROMs > tap to Red FLOATING BUTTON on the bottom and select ADD PATCHED FILE > Select the zip you patched like: XXX.rom_data-slot_xxx.zip
[*] An annoying popup will ask some stuff, tap to CHANGE LOCATION > DATA SLOT, type an ID doesnt matter what,
[*] Tap to TICK, it will run an command window or some old looking arse stuff and you have to wait, DO NOT LEAVE the app until you see the script result like this:
]
[*] If you see an error, you're fk'd up Error is a new terror you know. Although it doesn't prevent you to boot; you better clean the f'n infected rom by ROMs > 3 dot button of the specific rom > WIPE ROM and select all the boxes.
[*] You can switch between the roms you patcher either in the app or flashing the Dualboot Utilities zip via TWRP.
Ps. I'll take a look at the flashing Gapps, mod zips for specific rom later on, probably easy to do. For now it's enough internet for me today.
[*]Yeah, flashed Gapps, Kernel etc by just Patching a zip file like Gapps-full.xxx_data-slot-xxx.zip which means you have to patch zip by selecting your target(Select your set ID for your rom).
NOTE: Resurrection Remix rom has got a modem verification string inside the updater-script, you can't(I couldn't) flash it until you remove that string and re-compress the rom zip as so then patch it or you already doing this multi booting process on RR rom. My primary rom is MM Epic, I succesfully booted into 8.2.4.0 Global stable and RR 0714(latest official i presume) roms, just saying.
SIDE NOTE: Can't get root to work on RR rom. The included magisk, previous versions, DX kernel, SuperSU nothing worked. What a pain in the arse.
Thanks to chenxiaolong for the app. Punch me if I have forgotten a sh1t or a credit or whatever. Peace :fingers-crossed:
best of luck in ur thread brother...keep it high
carlitobahsoun said:
best of luck in ur thread brother...keep it high
Click to expand...
Click to collapse
I feel like im trying and posting crazy stuffs which seem to be not attracting for anyone haha. Anyway, i like sharing my experiences.
Mi MIX
7.5.4 Épic
If u need some attractive picture to make ur post more... Oh damn, looks cool...
Tell me...
lesscro said:
If u need some attractive picture to make ur post more... Oh damn, looks cool...
Tell me...
Click to expand...
Click to collapse
LoL i know what you mean. I may send nukes later
Mi MIX
Epic 754/RR 0714
Mi Mix 6/256GB
Globe rom developer 7.7.15
When I tap on menu-->rom the app crashes
I've tried different versions. Same problem.
alberto8523 said:
Mi Mix 6/256GB
Globe rom developer 7.7.15
When I tap on menu-->rom the app crashes
I've tried different versions. Same problem.
Inviato dal mio MIX utilizzando Tapatalk
Click to expand...
Click to collapse
The app is being biatch most of the times. Latest version never worked on my end, always crashed. But the version i've stated in the OP, the one which also crashes sometimes, but works generally. Clean cache and data of the app, uninstall and reinstall, before launching it, give the permissions it needs from app settings. Launch it, grant root permission, if does work; follow the steps of OP. It may crash once though, close the app from recents and re-launch. There is a reason of I call it a pain in the arse lol. Hopefully works.
Mi MIX
Epic 754/RR 0714
XenonHD
I've tried all these methods, app still crashes.
I think it's depending on the base rom (Globe ROM). This rom has kernel mods and others system mods.
What's your base rom?
alberto8523 said:
I've tried all these methods, app still crashes.
I think it's depending on the base rom (Globe ROM). This rom has kernel mods and others system mods.
What's your base rom?
Click to expand...
Click to collapse
My primary is Epic 7.5.4(MM), has got some mods as yours. I see that the original thread is filled with crash reports but there is no(i didnt see) proper fix rather than using an another version but you've already tried, so.. Perhaps you can see the culprit though crash log.
Mi MIX
Epic 754/RR 0714
XenonHD
I've found a working version: 9.2.0.r37
I've flashed last resurrection remix rom: works fine, except root permissions.
Miui remains the best rom [emoji16]
alberto8523 said:
I've found a working version: 9.2.0.r37
I've flashed last resurrection remix rom: works fine, except root permissions.
Miui remains the best rom [emoji16]
Click to expand...
Click to collapse
Yeah, couldn't get root either on RR, on XenonHD. Haven't tried another one though.
Sent from my Xiaomi MIX using XDA Labs
@Konsstantine34
HI thanks for your hard work bro
can you please tell me how to delete the modem verification string?
its giving me that error again and again
Thanks for your help
darudedudedocta said:
@Konsstantine34
HI thanks for your hard work bro
can you please tell me how to delete the modem verification string?
its giving me that error again and again
Thanks for your help
Click to expand...
Click to collapse
Hi man, thanks.
Through root explorer(or Es file whatever you use) Get into your rom zip;
» META-INF » com » google » android »» Open ''updater-script'' as editable and remove second this line completely:
Code:
assert(xiaomi.verify_modem("2017-04-13") == "1");
Then save edited updater-script and re-compress rom files.
Mi MIX
Epic 754/RR 0714
XenonHD
grazie!!
@Konsstantine34
edit: sorry to sound like a noob..but I dunno how to recompress the edited updater script and rom..
thanks again for your help and patience..
I tried to google it but I didn't find any helpful links
Thnaks again
darudedudedocta said:
grazie!!
@Konsstantine34
edit: sorry to sound like a noob..but I dunno how to recompress the edited updater script and rom..
thanks again for your help and patience..
I tried to google it but I didn't find any helpful links
Thnaks again
Click to expand...
Click to collapse
I presume you're doing this on your device. Here is some visual content that may help you.
After Extracting(unzipping) remove script that mentioned before and:
Some file explorers don't need zip to be extracted, you can edit the content as you wish but, in my experience these explorers corrupt the zip. The clear way is what i just sent [emoji106]
thanks mate for going above and beyond in helping me out
darudedudedocta said:
thanks mate for going above and beyond in helping me out
Click to expand...
Click to collapse
Cheers, please let me know about it though.
thanks mate..its finally working
Konsstantine34 said:
Hi man, thanks.
Through root explorer(or Es file whatever you use) Get into your rom zip;
» META-INF » com » google » android »» Open ''updater-script'' as editable and remove second this line completely:
Code:
assert(xiaomi.verify_modem("2017-04-13") == "1");
Then save edited updater-script and re-compress rom files.
Mi MIX
Epic 754/RR 0714
XenonHD
Click to expand...
Click to collapse
Konsstantine34 said:
I presume you're doing this on your device. Here is some visual content that may help you.
View attachment 4219789
After Extracting(unzipping) remove script that mentioned before and:
View attachment 4219792
View attachment 4219794
Some file explorers don't need zip to be extracted, you can edit the content as you wish but, in my experience these explorers corrupt the zip. The clear way is what i just sent [emoji106]
Click to expand...
Click to collapse
Konsstantine34 said:
Cheers, please let me know about it though.
Click to expand...
Click to collapse
alberto8523 said:
except root permissions.
Miui remains the best rom [emoji16]
Click to expand...
Click to collapse
darudedudedocta said:
thanks mate..its finally working
Click to expand...
Click to collapse
@valerio.tosti
Hello gents, I don't like bragging like ''I was right...'' but I was
I've removed (Wiped in Dual boot patcher app) all the roms except primary(can't be removed lol).
Then clean flashed RR latest official, I have root priviledges on it(also xposed), then patched and flashed miui_MIMIXGlobal_V8.2.4.0.MAHMIDL which is not pre-rooted miui rom.
So, patched SR2-SuperSU v2.79 and flashed it too. Voila, both roms are running with root priviledges. So the key was being on clean flashed RR rom then patching multi-boot roms. Thing i may try next is xposed on both(or multiple) roms but for now i can sleep in peace lol.
Mi MIX
Epic 754/RR 0714
XenonHD
Fookin forgot to attach fookin screenshots, here are they as a fookin proof.