Due to the problem of Opel Astra H having the 2-Din slot quite low, I want to try to install a head unit in the place of the standard Opel display on top of the dash panel. Since there is not enough space behind that display, I'd have to install only the display of the head unit and then put the unit somewhere else - maybe behind the actual 2-Din slot or the glove compartment. Since I don't have a head unit yet (partly because it depends on whether I can do the above), I thought I'd ask here.
1. Looking at pictures of various HUs, it seems removing the front panel with display should be no problem, for example on this unit - https://de.aliexpress.com/store/pro...ith-Octa-Core-2GB-Ram/600991_32805474302.html . Is this the case or are there HUs with the display glued to the HU or otherwise unable to be removed?
2. Is there just one flat cable connecting the display to the HU or are there more? I'm talking about HUs with touch buttons, like the Dasaita unit linked above, not ones with rotary knobs for Vol/Tuner and mechanical buttons for Home, Nav, Radio, etc. Maybe someone can upload a picture of his HU with the front removed?
Related
I have one of the latest Joying 2GB Sofia headunits, don't think it really matters which one.
What I do not have is a reversing camera and as I am not driving a bus or heavy goods vehicle I don't intend to get one.
So my questions are
1. Can change or tweak something so when I put the car in reverse the screen doesn't change (I know I could cut the reverse wire to the headunit but I like the feature which reduces the volume when reversing)
2. If the above is not possible is there a way to remove the reversing lines which show on the black screen when I am reversing? I am aware that there is an option for this but if I disable the revering lines in the settings I get a black screen with green text saying "no signal" when reversing.
Thanks
Test the wire, maybe is defective
FOr me works perfectly with Opel Joying 2gb
I have encountered the same issue. I do realize that if I leave the car in reverse long enough eventually there will be signal. The weathet has became cold I am not sure if there's anything to do with it
Sent from my Vivo 5R using Tapatalk
Hi All,
I just got this unit from amazon. I have the quad core 2GB RAM 16GB ROM 10.1" version which came with Android 8.1. Installation was easy and the unit seems very nice and fast enough but when ever I try to open an app like spotify or youtube or even OBD apps the screen goes black with "DO NOT operate while driving" error. I tried installing a third party launcher and it caused this error every time I tried to go to the home screen. Google maps does not cause this issue.
I currently wired the rear cable to ground just in case wiring causing the issue but that did not help. Under the settings there is no option in the video section which would allow me to turn off this error. Overall the rom on this as is looks half baked missing bunch of options. I do not even have a system update option for me to flash a different firmware.
Any suggestions that could help me get rid of this annoying issue and use this unit properly?
Thank you all.
Seems nobody cares but I finally figured out the solution. Under settings>car options>about there is another settings button. If you select that and enter "8888" it will take you to the deep settings menu where in drive options you change "Break" to "0". This will get rid of this bug permanently.
Thanks in anyways.
I care
I just had the same exact problem with the same radio
thanks so much for taking the time to update your post!
Do you have anymore information on tips and tricks for this radio?
Hi, tried this on my mekede head unit, took a few minutes to figure out which menu to follow and the part to alter but it worked great. Awesome. Cheers
Eonon ga2168k
Good job on figuring it out... I went through this with the same exact head unit...
Let me expand on this "problem" a little further please...
So most head units now are more than just a radio/CD player ..specifically ones with DVD players (or ones that can play any video really) the manufacturers can be held liable for people getting into an accident while driving because they were watching a movie or had a movie playing (Cant fix stupid) on their head unit located on the dash (as well as it being illegal in most (if not all) states in the USA).
REAR DVD players are exempt from this because... well they are in the rear... and not in the driver's line of sight.
With that being said, one wire on the harness that came with this unit (wire #23 I think) is labeled " BRAKE CONTROL" - IF (a big IF here) EONON set this up like most other head unit manufacturers that make an in dash DVD/video display, this wire needs to be connected to the brake switch so that it receives a signal saying that the brake is "on" and the vehicle is not moving...therefore "SAFE" to operate this unit (watch a movie, video, make setting changes, brew you a cup of coffee, paint your nails etc etc etc......)
Because there is NO REALLY good diagram for wiring this to the brake switch... you are left with a guess as to how it is to be done. (Should just be a positive connection from parking brake to wire.... I think... I guess...)???
This brake safety feature has been in other units for years and a LOT of people negate this circuit (I wont list the ways... it's easy to figure out) I even know of some car installers that worked for a national electronic retail store that would "bypass" this circuit in the customer's cars.
I am glad Eonon put this programming control into the back end of the unit because I, (having installed a few radios in numerous vehicles I have owned) REALLY didnt want to go through the trouble of bypassing the circuit... so shutting it off, on The unit was just as well for me. 1 less wire to worry about.
Just go into the root menu as stated above, and select "BRAKE" then adjust to 0. This removes all enable/disable requirements for that circuit.
Great unit so far... wish Eonon would spend more time writing a more informative instruction manual.. and maybe hire an American or British to actually write the darn thing so people could understand it.
Hope this helps.
I have the same unit but I can't get the panel to light up. Anyone knows how to wire to the car to get the panel to light up?
syung61 said:
I have the same unit but I can't get the panel to light up. Anyone knows how to wire to the car to get the panel to light up?
Click to expand...
Click to collapse
Panel as in the buttons not on the touch screen? (Ie power, volume up volume down )
Wire (I believe its orange or blue in color if my memory serves me well) regardless it has a tag on it that says "ILL" or ILLUM... that's for illumination. You need to figure out what wire in your car is for illumination for the stereo... if you cant, run a wire from your headlight switch that controls the parking light. USUALLY, there is a wire for the stereo to make it light up when the headlights are turned on. You just need to find it.
Wyatte Steel said:
Panel as in the buttons not on the touch screen? (Ie power, volume up volume down )
Wire (I believe its orange or blue in color if my memory serves me well) regardless it has a tag on it that says "ILL" or ILLUM... that's for illumination. You need to figure out what wire in your car is for illumination for the stereo... if you cant, run a wire from your headlight switch that controls the parking light. USUALLY, there is a wire for the stereo to make it light up when the headlights are turned on. You just need to find it.
Click to expand...
Click to collapse
Yep. In the Eonon harness, it's an Orange wire with a tag on it that says "ILL". just hook it to any wire that feeds your dash lights.
Dears,
anybody tried Eonon GA2178 - 10" Android 9 Head Unit?
I'm actually on Eonon GA2168K - 10" Android 8 Head Unit, it's a good device with minor problems.
Anytime developers fix a problem they introduce an other problem and there's no community support for MTK chipsets.
Because of this I'm evaluating the new Eonon GA2178, that is quite similar but based on Rockchip chipset.
Tks!
Brake setting
On my Ga2172 the brake setting shows open close or speed, so which is it to watch video on the move?
Hi all,
I bought an Android HU from Aliexpress for my 2016 Volvo S60.
It is a PX3 device but I am not sure if it is a MTCD/E or something like it.
It is only a display unit with an android/MCU board and has no amplifier etc.
Normally it shows the original car menus (stretched to >8 inch wide) on it and when you push and hold the menu
button on original car console it switches to Android UI. In short, it is a little different then usual Android HUs.
I am pretty satisfied with the unit but there is one deal breaker for me. When I stop the engine and remove the key from car,
Android HU shuts off instead off sleeping. So when I want to use the car again, it takes 40-50 seconds the unit to boot.
I have also a Px5 unit in my VW car and it instantly awakes when I start the engine.
What I want to ask is if it is a software option? Can I somehow make the unit sleep.
Do you think this unit compatible with Hal9K or Malaysk Px3 roms?
If PX3 sleeping not possible can I use a PX5 board to upgrade the unit?
Thanks in advance...
P.S: I attached a couple of photos of the unit. There is also some factory setting page shots.
Factory setting password of the unit is 1314....
No one no help?
I did it again....
Since last weekend I have the new Pumpkin here and test it extensively at my test place before I install it in the car.
Link to the radio: https://www.autopumpkin.de/autoradi...a-ram-4gb-rom-32gb-unterstutzt-fast-boot.html
Data
Scope of delivery:
2 DIN Unit
10.1 inch glossy screen, with metal frame
Cable set with 2 USB ports
User manual English/German
PX5
64-bit 8-Core Cortex-A53 1.5GHz
Android 9, build number 201907251651
MCU: CSN2_06252ß19_163051 (Despite this MCU the device is obviously a KLYDE device)
Here again an information to the MCU:
It is a PX5, but with a newer mainboard. The CSN2 devices are not firmware-compatible to the known PX5 boards, so there are no custom-roms at the moment.
First impression:
I must say, the first impression is very good.
The first startup was done after about 20 seconds.
The original launcher is as usual from Punpkin, as well as the apps included.
What's new:
Additional USB on the front panel
2 micro SD trays on the front panel
Volume control knob (illuminated)
Knob for App switching (illuminated)
App called "Tachograph," a new app for the Pumpkin USB-Dashcam.
Caravan, an app that supports rear view camera and front camera and you can switch between both cams. (did not try it...)
Sync (I don't know what it's for yet)
CD player for external CD players
An app called "Joykey Study" for certain OEM-Key-Pads, I have to do some research myself...
VoiceControl App Looks like an app for Apple's friends. The app doesn't work for Android phones (at least for mine).
The Settings menu was cleaned up, also the menu for the "factory settings". Here you don't find the strange menu anymore, but it's neatly clean arranged. Unfortunately not in German, but I think you can live with that.
Display of the battery voltage in the status bar is now possible in the "Personal settings".
Also the settings of the phone can be displayed now. Here you can see the field strength and the battery status at the top of the status bar.
The radio runs very smoothly and I was able to install all the apps I needed without any problems. Root was possible with the well-known ADB method without any problems.
The screen is connected to the radio with a flat cable plug, just slide it on and click into place.
You can turn the screen with a little effort in all directions and the holder makes a very stable impression.
First Tests:
The working temperature is important for me. With active route guidance, DAB+ active in the background, Blitzer.de active, the temperature stays ~60°C... and that without any optimization.
Yesterday I installed the radio. The first thing I noticed was, that Pumpkin is finally keeping the usual EUR installation dimensions for this radio. My previous radios always needed a reworked installation frame. A new frame is therefore due because the existing frame was reworked to fit my other units....
Potential for improvement:
Developer menu is password protected. The PW is even not known at Pumpkin. It's marked as secret... But i´m on it.
I got the information from Pumpkin that the new Android 9 design from Pumpkin is still in work. I'm curious when that will come. So I'll show you some pictures as soon I will get it from them.
On my car the phone keys don't work right now, they are not recognized by the app. So I had to change my voice key so that I can answer a call via the steering wheel and hang up (double assignment of the actions goes via long click).
Recommendation:
For me its´s a clear YES, because I don´t need any custom rom. I just use another launcher.
Please comment on the 10-inchness implementation
Did you have to cut into your car plastics? Or does it stick out an leave a gap? Was there a snug adapter with no gaps and no cutting?
Does it tilt/rotate? If it does, does it stay in place when you are operating it or wiggle under your fingers? Does it stay still on bumpy roads? Etc.
Aadieu said:
Please comment on the 10-inchness implementation
Did you have to cut into your car plastics? Or does it stick out an leave a gap? Was there a snug adapter with no gaps and no cutting?
Does it tilt/rotate? If it does, does it stay in place when you are operating it or wiggle under your fingers? Does it stay still on bumpy roads? Etc.
Click to expand...
Click to collapse
The unit is exactly 2-DIN large so there is no gap and nothing has to be cut from cockpit plastic at all.
The screen stays completely in place even when placing the hand on the top and using the thumb for a screen touch on bumpy roads.
... and yes, it stays still on bumpy roads.
For my car (Mitsubishi ASX) I need a car specific adapter, because the OEM unit is 2-DIN high but about 6cm wider than 2-DIN but with just a 6" screen and lousy firmware/UI and OS. The adapter I buyed needed to get cut, because nearly all 2-DIN chinese units are not really 2-DIN, they are a bit larger. To get the chinese units in my car, I had to cut the hole larger.
With the new unit I would be able to use the original size... so I have to buy a new one.... unfortunately...
You can tilt and rotate the screen to get rid of any glare and you can move the screen up and down, to get the right position at your dashboard.
Until now I don´t see any bad behavior.
I picked up an Ali Express "Sadocom" 4GB /64GB head unit for a 2000-2006 Toyota Corolla and several other related Toyotas. It's slightly wider than a regular 2din Android, but it retains the 7" screen and has two knobs and several buttons on each side. I'm putting it into a 1998 Dodge truck, and it is replacing an older 1GB/16GB unit. The new unit came with ZERO documents, there is no wiring diagram on the unit. It takes several days for the seller to respond, and they are lackluster at best- example I asked for a wiring diagram, and the response was "Which one?". In the about the unit screen, it says it is a 8259, or 8259 pro depending on which screen you are on.
I found a pinout site that had data for the Corolla, and used it by cross-referencing the connectors on the new unit. Most of the wires were the common yellow= battery, red= accessory, black= ground etc. It powered up right away and the illumination lights up when I turn on the parking lights. Speaker balance is correct. The main connector is a 16-pin connector. The only wire I did not use was the blue antenna/amp power since the truck has neither. There is a small gauge black wire with small ring terminal coming from the area of the accessory connectors. It's only a couple of inches long.
Problems I need help with solved (no thanks to vendor):
1. Steering wheel controls. There are two unidentified wires (plus the small black one on a different part of the radio), so I presumed they were the SWC wires. One was Orange/Black and the other White/Black (it was smaller and not next to the white speaker wire, that W/B wire was larger). The older Android I had in the truck worked OK with the factory SWC. My truck uses a +/- SWC system. I tried connecting the Orange/Black to + and the White/Black to - but could not program any button. I also reversed these and the radio sees no SWC input when I try to program them.
Solution: Use OR/BK radio wire to truck SWC + wire, and truck SWC - wire to radio ground wire. Both sets of controls working properly. See attached PDF for diagram.
2. (solved, see update below) I can't change the logo or any other password-protected menu functions. I Googled Sadocom and 8259 and password w/o any success. I read through several threads here, and tried the following codes w/o success (the input limit is 4 numbers- no letters)
Solution: 5678 works.
UPDATE- I did more reading and 5678 worked to unlock the radio.
UPDATE 2- The accessory power problem was user error! I forgot on these older vehicles accessory is one position back from off, not one position forward (I thought accessory was off). I was used to it being one forward after working on some newer vehicles. I have deleted that problem from the post and title for brevity.
UPDATE 3- I measured the two wires in question, and both are putting out about 3.2V positive. I wired the OR/BK to my RD/BK SWC positive wire, and my BK/BR SWC negative to the radio's ground wire. Voila! Working SWC. PDF diagram attached.