Camera focus problem - Samsung Galaxy S8 Questions and Answers

Hi al.. I have my s8 from around 2 mounts with no problem but from about 2_3 Days i se that my back camera if i dont use it or close it în task manager when i turn IT up again i have to shake my phone to focalize.. Than it works fine but next time i use it i have to shake again to focus.
Does others have this problem.. Its my phone camera or software?
PS.. When i shake i hear a focus sound in the back.. Like a click.

I think it's your phone camera, mine is still great... Did you drop it?

I dif not drop it... I have found others with this problem.. In order to make the camera focus you need to shake it.. It's very annoying..

Lightly whack the phone and the focus comes back on.
https://us.community.samsung.com/t5/forums/v3_1/forumtopicpage/board-id/GS8QA/thread-id/5524/page/2
Wife's complaining about the same issue. This is a COMMON problem with the S8(+). Sigh.. Samsung are useless.. cannot get a phone done properly these days.

I had the same problem on my Samsung Galaxy S6. Annoyi ng focus problem. Last week i update the S6 to Nougat and the problem was not everytime but sometimes. Its a strange problem. My S8 dont have this problem. I hope my S8 dont come with this problem. What you can do is reset everything wipe everything and try it again. I hope this solved your cam problem

Yes it is pretty common problem on many S8 and S8+ devices. There are thousands of users which have this problem, and it is HW problem, not SW. This will be new #cameragate issue. To test if it's caused by HW simply enter service mode by typing code *#0*# and select MEGA CAM button. If there is problem with focusing too, you have problem with camera module which is stuck and not properly lubricated.

Yeah I notice mine is blurry from time to time. Annoying when I'm trying to take pictures of my kids, ordered the Pixel XL 2 and cant wait to get rid of Samsung.

Related

Main camera not working

I have O2 xda exec, Its main camera stopped working , camera program starts after a long pause and blank screen appears showing only camera function buttons. I can start the secondary camera from that screen and it works fine. there is no other problem. help needed please.
Camera
Hey there,
I'm having the same camera problem... Did you drop yours? Were you able to fix it?
Thanks ahead,
N
same issue
Meekseeker said:
Hey there,
I'm having the same camera problem... Did you drop yours? Were you able to fix it?
Thanks ahead,
N
Click to expand...
Click to collapse
I just started having this exact same problem when I flashed to jwright's ROM (which is really quite nice). Given the amount of time it takes for the camera to load up, I'm betting this is a permissions problem in the registry and it might be solved by the copy, rename, copy back solution that seems to work for the other things. Anybody know what registry folders have to do with the camera?
Hmmm, now that I think about it. I dropped my camera a few weeks ago and I don't know that I ever checked the camera afterwards. I'm wondering if I wrecked the camera. I just finished putting it back together and the camera looks fine physically but that means nothing really.
Time to poll the board for a new camera part.

Boring Error

i tried 3 different roms same here.
when i got sms touch screen is not responding. when i reset it no problem. but i cant unlock i cant answer calls.
any people have same error ?
or
any offers to solve this problem ?
there is a thread about this somewhere around. it seems to have to do with a defect of the touchscreen panel especially if you place it in your pocket facing your leg. place it facing outside you should have no problem. also screen calibration via bootmenu is supposed to solve the problem (partly?). happened to me once, calibrated the screen, never happened again
Recalibrate the screen that fixed the issue for me
Sent from my Dell Streak using XDA App
i made re-calibration lets wait for one day or two. bec here time is 11 pm so no body calls me after now lol lets wait for tomarrow
yeah now i have no more problems
re-calibration fixed every problem thanks all.

Weird HD2 unresponsive screen

Now I've read about a problem of the hd2 having digitizer problems and that only a replacement will fix the unresponsive touchscreen issue. But why is it that when I can get my touchscreen to work that it works flawlessly until it goes to sleep? Then i have to continually wake and swype and sleep over and over until it responds. It just seems very weird that after it wakes that it never seems to have a problem. I'm using the miui rom right now and have set the screen to never go to sleep. So I want to see how long it will go without this problem. Has anyone else seen this happening with their phone as well?
Make sure the kernel, and Rom are up to date.
I have that too on an AOSP Gingerbread rom. The screen is not unresposive per se but calibration seems off some times, strage for a capacitive screen.
ive had the problem with android before and there were a few different fixes ...
one fix was to turn off compatibility mode
another was kernel
ive also had the problem with wp7 ( nothing a few hard resets and patience couldnt cure )
either way good luck
well since my first post, i hadn't let the phone go to sleep once and it worked perfectly fine. so i decided to turn off compatibility mode and let it go to sleep.... and when i woke it and i slid my fingers down it actually worked. so far it's worked every time. why would compatibility mode mess up the touchscreen though?
i have NO earthly idea! just a little tidbit i picked from a dev. i would speculate but would end up looking and sounding foolish. so im going to quit while im ahead and have actually been of help :-D cheers
Where can i disable compatibility mode?
I get the same problem. I've used a ICS rom for a day or so and suddenly the lockscreen was unresponsive. I thought it was ROM problem, so I flashed Cyanogen 7, but the screen didn't respond as well... I flashed everything to stock (removing magldr and hspl) and the problem stayed... After several restarts the screen started to respond and now it works (sort of). The tricky thing is: sometimes when I go out from some app in android, the screen doesn't respond again. Locking and unlocking the screen fixes this, but only temporarily.
Did this ICS rom screw something (...hardware?!) or is it a pure coincidence that a few people encounters the same problem for the first time in such a short period of time...
And one more thing... my warranty expired 5 days ago... please help!!!
I had this same problem with my phone before my warranty expired; before I flashed any android roms on it, and while it still had stock WM6.5. I called HTC customer support and they had me send in the phone for repair. They replaced the digitizer and I haven't had the same problem since. It was wierd because in my mind is seemed like a software problem because it would respond nicely as long as the screen was unlocked and the instant it was locked the response was very crappy, sometimes it took forever to unlock my phone. So it might somehow be a hardware issue
WaspVL1
Machupichu2 said:
Where can i disable compatibility mode?
Click to expand...
Click to collapse
spare parts!
I repair phone myself and i can say that i get A LOT of hd2's with this problem. For the most part it is the hardware because no matter what software you put on the phone it is just a matter of the luck you have to get it working. My hd2 broke 2 times b4 and it was always hardware. Htc must of messed up with the hd2 digitizer
cmacia06 said:
I repair phone myself and i can say that i get A LOT of hd2's with this problem. For the most part it is the hardware because no matter what software you put on the phone it is just a matter of the luck you have to get it working. My hd2 broke 2 times b4 and it was always hardware. Htc must of messed up with the hd2 digitizer
Click to expand...
Click to collapse
from what ive seen in photos of the leo mobo it looks like the connection for the screen/digitizer (not sure on hardware) is located right behind red end call/power button and from being mashed off,on,off,on,etc loosens/damages connection.
or is the hardware screen issue just a complete shot in the darks chance?
OH ... ive had the software issue (fixed as i mentioned earlier) AND unrepairable (with my limited tools and balls to physically tear into this badboy) hardware issues.
well, it's been a few days and my phone still seems to be fine. it hasn't once locked up on me yet. i don't know why turning compatibility mode would fix this. or maybe the phones connectors were loose and are now miraculously back in at the same time i unchecked compaibility mode. the only bad thing was that this was happening the last couple weeks and i had given up and already ordered a sensation 4g. or well, guess i have 2 phones now
Its seems possible. Every since I replaced my digitizer with a non OEM one its has never failed on me again. And I hope it never does. There dam expensive.
rubledub said:
from what ive seen in photos of the leo mobo it looks like the connection for the screen/digitizer (not sure on hardware) is located right behind red end call/power button and from being mashed off,on,off,on,etc loosens/damages connection.
or is the hardware screen issue just a complete shot in the darks chance?
OH ... ive had the software issue (fixed as i mentioned earlier) AND unrepairable (with my limited tools and balls to physically tear into this badboy) hardware issues.
Click to expand...
Click to collapse
Sent from my HTC HD2 using XDA App
Compatibility Mode
I also have this issue, therefore I just recently flashed my hd2 with Tytung's 4.0 ICS Rom. As expected, this didn't help very much.. What I am now going to try before I send my phone to HTC is to disable compatiblity mode. BUT, I can't seem to find this compatibility mode check anywhere. Could someone please guide me there?
..
Windows 7
I will be flashing my phone with w7 now, to see wether this is an android kernel bug / softare issue or if this relates to hardware. I also see a lot of people saying that after fixing the digitizer it works again, so it might actually be a hardware issue. I will post my feedback when I have tried with w7.

Sound on my galaxy note 2 is muted

I just bought the device yesterday new, and from the first use i had a weird issue, the sound is muted, all sounds , music play, calls with speakers on and screen sound, sometimes it works and sometimes not, when i plug the headset i can hear everything
Any solution ? i won't wast my time to go the warranty, is it software or hardware issue ? i did factory reset and still the issue come back
Seems much like software issue, have you downloaded and installed latest N7100 firmware? With odin you can do it "officially" without losing warranty.
Sent from my GT-N7100 using xda premium
I will do it hopefully it solve the problem
i did it and told me PASS, but after booting up the device i found the same background and all my settings still there like nothing happened , and now the the all mobile sounds are gone forever even with restart not working
Please guy i need a solution !!!
Still no one to help ?!!! where's the experts ... can anyone at least tell me for sure is it software or hardware issue ? and the warranty can detect that issue ? cause sometimes the sound working fine for hours
tantan911 said:
Still no one to help ?!!! where's the experts ... can anyone at least tell me for sure is it software or hardware issue ? and the warranty can detect that issue ? cause sometimes the sound working fine for hours
Click to expand...
Click to collapse
Wow, this stinks. If it were my brand-spanking new phone, I'd return it. It almost sounds like a solder issue. My Note 2 has a very loud speaker with excellent quality (nice bass) while listening to podcasts. When on a call using the earpiece, it's actually too loud. I haven't figured out how to turn it down yet, not a critical issue.
Do you get sound at the Samsung logo when you restart the phone? If not, it's a hardware fault and exchange it.
mi7chy said:
Do you get sound at the Samsung logo when you restart the phone? If not, it's a hardware fault and exchange it.
Click to expand...
Click to collapse
The weird thing , sometimes the sound of Samsung logo working at the start up and sometimes not ... when i just got the device and start to unbox it and turn it on .. it didn't make a logo sound .. but later sometimes it does !!!
i gave it to Samsung today and they told me it will take 5 days .. they will make new software format and then check the hardware . i hope they detect the problem cause sometimes it works fine for hour and the sound disable just happen for minutes !!
Any Ideas ?
Thanks for reply
Also, go into the dialer, type in *#0*# and go to the Speaker to see if it works.
I went to the warranty and they told me it will take 5 days for troubleshooting, they said first we are going to install new software then you will have 48 hours for testing, if the problem persist they will change it for me , i don't know if they can discover it, Also here's some link for some users have the same issue :
http://www.askmefast.com/Sound_on_my_galaxy_note_is_muted_without_my_setting_it_why-qna3532721.html
http://www.askmefast.com/No_sound_on_my_Galaxy_note_appears_to_be_muted-qna3527305.html
http://www.askmefast.com/Galaxy_note_turn_mute_automatically-qna2745005.html
http://www.askmefast.com/My_Galaxy_...len_did_not_have_this_problem-qna3975985.html
Thanks
I received it from Samsung Maintenance and they implemented new software installation and told me the problem solved, anyway i took it and just going to my car the issue happened again, i back to them they told me they will troubleshoot it again !!! to be sure that the problem persist !!! WTF
Any ideas will be appreciated
tantan911 said:
Any ideas will be appreciated
Click to expand...
Click to collapse
try pressing on the main speaker, the point of contacts of most phone speakers are just behind or sides of the actual speakers just to rule out loose contact. also try to master reset if it doesn't work try reinstalling the rom to rule out software problem. Otherwise, I would return it for a replacement. Good luck.
Edit:
If pressing on the speaker temporarily solves the problem, I would still ask for replacement.
nm8 said:
try pressing on the main speaker, the point of contacts of most phone speakers are just behind or sides of the actual speakers just to rule out loose contact. also try to master reset if it doesn't work try reinstalling the rom to rule out software problem. Otherwise, I would return it for a replacement. Good luck.
Edit:
If pressing on the speaker temporarily solves the problem, I would still ask for replacement.
Click to expand...
Click to collapse
I already asked for replacement but 5 days passed and they still trying to troubleshoot it before going to replace ... damn idiots !!!
Anyway , so you saying it's mostly a hardware issue , right ?
Thanks for your support
Did they get this issue fixed for you? Mine is doing basically the same thing, but only the media volume, it gets muted randomly and I can't adjust it, so I reset the phone and then it works.....any ideas???
tantan911 said:
Any ideas will be appreciated
Click to expand...
Click to collapse
my galaxy s3 get a issue like ur problem (( at now i have GalaxyNote2))
after 1 months work with GS3 sounds gone randomly, i flashed my cell with every rom costume and official but no success some nighte when i work with my s3 without sound i hear badly noise from speakers and i turn off my cell and phone gs3 dead complletly
i do everything for recover my cell and i found way to turning on my phone with sound !!! i must warming galaxy s3 to work perfectly when gs3 get cold at first sound gone and second complletly dead
iam so confused on this issue and i forget my s3 and bought galaxy note 2

Sensors and MCU not working

Hi guys,
New owner of a S4 (GT-I9505 international) here with a problem. 2 days ago I noticed the screen wasn't rotating anymore. I used to rotate it portrait/landscape in applications like Camera or Internet (browser). The moment when it started to bother me was when looking at pictures with the phone in portrait and the image was landscape. Trying to rotate the phone didn't help. It was frozen. I called a buddy of mine who has some experience with Samsung devices and told me to verify the "Auto-Rotation" settings. It was all OK and enabled. Then he suggested turning the phone off and pulling out the battery and SIM card for 5 minutes and putting it all back. This didn't help either. Finally we got to the point where he told me to enter *#0*# in the Phone dialing application. As you might already know, this code gives you access to the "testing" hidden utility. There I tested all the options available. Everything was fine except for the Sensors and SensorHub Selftest.
In the Sensors section, all the tests failed, starting with the Accelerometer and ending with the Temperature. I uploaded screenshots taken during the tests. Please remember this started 2 days ago. Before this it was working perfectly. I don't recall making and major changes like updating any OS components or installing/running stress utilities related to sensors or device behavior. After doing some research online and reading about other people's similar problems I got to the point where I started to suspect a problem with the MCU (Micro Controller Unit). This component, according to Samsung, controls all the sensors and reads raw data from them without accessing the AP (Application Processor) this way extending the battery life. I believe the problem is here because it seems odd that none of the sensors are working all of a sudden. Can this component put the sensors into a sleep state and shut them down completely? Might this be the case here?
Below are the solutions I tried in order to revive the MCU and finally the sensors. I was all without success:
1) Turned off the phone and pulled the battery and SIM out. Put the back in after about 5 minutes. Result: sensors not working.
2) Reset to factory-settings from the settings option while the phone was in the working state (turned on). Result: sensors not working.
3) Rooted the phone, installed Clockwork Recovery, made a full system and applications backup and then installed custom ROM (two actually: PACMan, Google Play Edition (4.3)). I did this in order to exclude a problem related to drivers in the stock Samsung ROM, even if it was logical that Samsung being the owner and manufacturer of the device might have the "best" drivers and applications for inquiring the device components/sensors. I am aware this ended the warranty for me, but can I know it can easily be undone. Result: sensors not working.
4) Restored the original stock Samsung ROM. Result: sensors not working.
The utilities used for sensor testing were: Sensor Kinetics and Sensor Tester. Both can be found in the Play Store. On my wives phone, which is an old HTC Desire, both utilities picked up the available sensors and created graphs with the results. On my S4, I only got blank charts/graphics/results. In Sensor Kinetics for the Gyro for example, the message was "Waiting for the Gyroscope sensor...", just that, stuck.
If there are any other guys (or ladies!) out there who encountered this awful experience, please reach out and tell me if you found any practical solution, any other then just taking the device back to warranty. I'm open to any suggestions.
Best regards,
Andrei
Most likely a defective device ... can't you claim warranty and sent it back?
Sounds like hardware failure. This would be an issue for Samsung to solve.
Sent from my GT-I9505
AvelonTs said:
Most likely a defective device ... can't you claim warranty and sent it back?
Click to expand...
Click to collapse
Unfortunately I bought it second-hand and it does not have any warranty. I guess it's one of those moments I wish I had patience and gathered more cash to buy a new one from the store. Anyway, it's my bad luck. I had it working perfectly for weeks after buying it. I will use it like this for the time being..
i´ve got the exact same problem since yesterday...
i think i´ll take it to the shop for warranty
I've got the exact same issue. All sensors are having the same issue. None are working,
I found out because my camera app was not switching between landscape and portait any more. All pictures are saved as landscape...
Called Samsung Netherlands and they told me to wipe my phone (still latest original stock ROM) and try again.
Making a backup now using Kies... and will hard reset it afterward and check the sensors.again.
Probably not going to work... So I have to send it in...
darklord said:
I've got the exact same issue. All sensors are having the same issue. None are working,
I found out because my camera app was not switching between landscape and portait any more. All pictures are saved as landscape...
Called Samsung Netherlands and they told me to wipe my phone (still latest original stock ROM) and try again.
Making a backup now using Kies... and will hard reset it afterward and check the sensors.again.
Probably not going to work... So I have to send it in...
Click to expand...
Click to collapse
Hi there. I had same problem with sensors and MCU test failed, so i took phone to service. They said its hardware failure and replaced main board. Im picking phone tommorow and we will see...
Hi guys,
I took mine to a local phone service, not the official one, but they are an affiliate. They could not figure out exactly what the problem was so they replaced the logic/main board just for testing. It was all working fine. They called and informed me of the findings. Given the fact I don't have warranty for it, they suggested to send it to our main service in Bucharest where they have a more sophisticated testing equipment. It is possible to get a more precise answer regarding the defective component and maybe a less pricey solution to the problem. At this time, the only viable option is to get a new logic board in place, which is about to set me back 250 USD. I will get an answer from Samsung in Bucharest by tomorrow or the day after tomorrow.
I will get back to you with my final solution... hopefully something not so expensive
@darklord, @eweu: please post back you findings. Maybe in the future when some other unfortunate owner finds his way in here, will have a better understanding of whats on the plate for him.
Thanks,
Hard reset did not work as expected. Going to drop it off at a local official repair center....
S4 Sensors failing
I have the same problem with my S4 GT-I9505 device not auto-rotate, air gestures with gyroscope and accelerometer tests failing. S4 been back for 3 weeks to Samsung for repair came back and failed again after 1 week
KSal7506 said:
I have the same problem with my S4 GT-I9505 device not auto-rotate, air gestures with gyroscope and accelerometer tests failing. S4 been back for 3 weeks to Samsung for repair came back and failed again after 1 week
Click to expand...
Click to collapse
After installing some other ROM's and playing with different CSC's I have no sound and even no wireless and only Edge speeds on some ROM's. Restoring from backups, wireless came back and HSDPA+ also, but no luck with sound what so ever. Now, I have a tablet more or less. Thanks Samsung, this is great!
canaris1780 said:
After installing some other ROM's and playing with different CSC's I have no sound and even no wireless and only Edge speeds on some ROM's. Restoring from backups, wireless came back and HSDPA+ also, but no luck with sound what so ever. Now, I have a tablet more or less. Thanks Samsung, this is great!
Click to expand...
Click to collapse
Flashed I9505XXUDMH8_I9505OXXDMHA_BTU, sound and wlan working again. Previous problem with MCU/sensors still there.
i'm tired
canaris1780 said:
Flashed I9505XXUDMH8_I9505OXXDMHA_BTU, sound and wlan working again. Previous problem with MCU/sensors still there.
Click to expand...
Click to collapse
really i'm tired to solve this issue.
when i install new stock software the sensors work fine just a few minutes only yhen return to fail again.
i think its software issue and i'll solve it :good::good::good:
Sensors work again
:laugh: :victory:
Its work right now by itself
:crying:
after uploading the pictures its fail again
abdali_m2 said:
:laugh: :victory:
Its work right now by itself
:crying:
after uploading the pictures its fail again
Click to expand...
Click to collapse
I have the same thing here
all sensors are broken because of SensorHub BIN FW Version: AT0199999
then i try to update firmware with *#2663# it failed.
I have the same problem with my S4 GT-I9505.
Suddenly the device do not auto-rotate, and no air gestures with gyroscope and accelerometer are working.
The SensorHubTest end with FAIL.
Mid december I got one OTA firmware update and I didn't notice any problems first.
A few days after newyear I notice that my auto-brightness adjustment did not work properly.
Can't remember if auto-rotate didn't work when I notice the auto-brightness problem.
But finally I am here because I searched for sensors problems.
I did the SensorsHub Test with *#0*# and it ends with FAIL.
It seems that there is a problem with the 4.3x firmware.
With 4.2x all was fine.
Can anybody confirm my thoughts - that the firmware is broken and not the MCU itself?
What can we try? Downgrade? I read that one was lucky with "factory reset" but it didn't helped to revive the MCU of my device.
Thanks for reading
and answering
___
DK
Hi, i am a owner of a sch-i545 phone, and i have the same problem with the phone: no response of any sensor and a fail on test (or upgrade firmware) of the sensorhub.
At this time i was tried a lot of solutions: i was flashed stock firmware, custom firmware, and of course a factory reset (by the way, the first time with this problem was when i did it a single factory reset), its still broken the communication with the sensors.
I get back to life the phone when i upgrade the phone from 4.2 to 4.3 (sadly) and get lost when i update the binaries in super su (previously rooted with vroot).
Yesterday i give the phone to a technician (a close friend of another best friend), he will test the phone on this weekend to determine what is the problem to try to fix it.
When He fix this phone, i will post any news!
Regards.
remy1004 said:
At this time i was tried a lot of solutions: i was flashed stock firmware, custom firmware, and of course a factory reset (by the way, the first time with this problem was when i did it a single factory reset), its still broken the communication with the sensors.
I get back to life the phone when i upgrade the phone from 4.2 to 4.3 (sadly) and get lost when i update the binaries in super su (previously rooted with vroot).
Regards.
Click to expand...
Click to collapse
Thanks for your answer. I have hope that the next firmware will fix it.
What is strange that none of any reseller/privers know this problem. It seems that also Samsung has no knowledge about this special error.
Well if the next firmware didn't fix the problem, I can replace my model with a working one, that is what the guy at the phone shop offers to me.
___
DK
Same Problem Here
Hi guys, I'm new to this forum so be nice :angel:
I am having the same problem in that none of the sensors are working which indicates that it is a connection issue or the actual hub not working or the firmware and not the individual sensors themselves. I have thought about this and looked around and to me it seems like there are only 3 possibilities for the problem:
1) The SensorHub BIN FW Version is out of date and needs to be updated manually (not through *#2663 as it doesn't work)
2) There is a connection issue e.g. the cable from the sensorhub to the motherboard is loose or broken
3) The sensorhub is broken (not the sensors)
I will try to find the firmware files and see if I can do a manual update. If that fails I will open up the phone and see if the cable is connected/broken. If I still cannot solve the issue, I will have to take it to the shop and hope I can fix it off warranty (I bought it second hand)
Dan
shadowsoulxp said:
Hi guys, I'm new to this forum so be nice :angel:
I am having the same problem in that none of the sensors are working which indicates that it is a connection issue or the actual hub not working or the firmware and not the individual sensors themselves.
[...]
I will try to find the firmware files and see if I can do a manual update. If that fails I will open up the phone and see if the cable is connected/broken. If I still cannot solve the issue, I will have to take it to the shop and hope I can fix it off warranty (I bought it second hand)
Dan
Click to expand...
Click to collapse
Thanks Dan for your reply.
I assume that your S4 shows the same behaviour as my one and the phone is still working fine.
The sensorhubtest failed and your light sensor for automatic adjusting and the sensor for turning the display are not working.
What is really strange that I went to a vodafone shop in Hamburg and ask them if there is any other one having problems with the S4.
You know the answer? They where wondering and telling me that this is wierd and they heard the first time of such an issue from me.
I showed them the device and showed them how I test the sensors. *#0*# funny they didn't know this combo
I hope that you succeed and share your knowledge,
with best regards.
___
DK

Categories

Resources