Now I've read about a problem of the hd2 having digitizer problems and that only a replacement will fix the unresponsive touchscreen issue. But why is it that when I can get my touchscreen to work that it works flawlessly until it goes to sleep? Then i have to continually wake and swype and sleep over and over until it responds. It just seems very weird that after it wakes that it never seems to have a problem. I'm using the miui rom right now and have set the screen to never go to sleep. So I want to see how long it will go without this problem. Has anyone else seen this happening with their phone as well?
Make sure the kernel, and Rom are up to date.
I have that too on an AOSP Gingerbread rom. The screen is not unresposive per se but calibration seems off some times, strage for a capacitive screen.
ive had the problem with android before and there were a few different fixes ...
one fix was to turn off compatibility mode
another was kernel
ive also had the problem with wp7 ( nothing a few hard resets and patience couldnt cure )
either way good luck
well since my first post, i hadn't let the phone go to sleep once and it worked perfectly fine. so i decided to turn off compatibility mode and let it go to sleep.... and when i woke it and i slid my fingers down it actually worked. so far it's worked every time. why would compatibility mode mess up the touchscreen though?
i have NO earthly idea! just a little tidbit i picked from a dev. i would speculate but would end up looking and sounding foolish. so im going to quit while im ahead and have actually been of help :-D cheers
Where can i disable compatibility mode?
I get the same problem. I've used a ICS rom for a day or so and suddenly the lockscreen was unresponsive. I thought it was ROM problem, so I flashed Cyanogen 7, but the screen didn't respond as well... I flashed everything to stock (removing magldr and hspl) and the problem stayed... After several restarts the screen started to respond and now it works (sort of). The tricky thing is: sometimes when I go out from some app in android, the screen doesn't respond again. Locking and unlocking the screen fixes this, but only temporarily.
Did this ICS rom screw something (...hardware?!) or is it a pure coincidence that a few people encounters the same problem for the first time in such a short period of time...
And one more thing... my warranty expired 5 days ago... please help!!!
I had this same problem with my phone before my warranty expired; before I flashed any android roms on it, and while it still had stock WM6.5. I called HTC customer support and they had me send in the phone for repair. They replaced the digitizer and I haven't had the same problem since. It was wierd because in my mind is seemed like a software problem because it would respond nicely as long as the screen was unlocked and the instant it was locked the response was very crappy, sometimes it took forever to unlock my phone. So it might somehow be a hardware issue
WaspVL1
Machupichu2 said:
Where can i disable compatibility mode?
Click to expand...
Click to collapse
spare parts!
I repair phone myself and i can say that i get A LOT of hd2's with this problem. For the most part it is the hardware because no matter what software you put on the phone it is just a matter of the luck you have to get it working. My hd2 broke 2 times b4 and it was always hardware. Htc must of messed up with the hd2 digitizer
cmacia06 said:
I repair phone myself and i can say that i get A LOT of hd2's with this problem. For the most part it is the hardware because no matter what software you put on the phone it is just a matter of the luck you have to get it working. My hd2 broke 2 times b4 and it was always hardware. Htc must of messed up with the hd2 digitizer
Click to expand...
Click to collapse
from what ive seen in photos of the leo mobo it looks like the connection for the screen/digitizer (not sure on hardware) is located right behind red end call/power button and from being mashed off,on,off,on,etc loosens/damages connection.
or is the hardware screen issue just a complete shot in the darks chance?
OH ... ive had the software issue (fixed as i mentioned earlier) AND unrepairable (with my limited tools and balls to physically tear into this badboy) hardware issues.
well, it's been a few days and my phone still seems to be fine. it hasn't once locked up on me yet. i don't know why turning compatibility mode would fix this. or maybe the phones connectors were loose and are now miraculously back in at the same time i unchecked compaibility mode. the only bad thing was that this was happening the last couple weeks and i had given up and already ordered a sensation 4g. or well, guess i have 2 phones now
Its seems possible. Every since I replaced my digitizer with a non OEM one its has never failed on me again. And I hope it never does. There dam expensive.
rubledub said:
from what ive seen in photos of the leo mobo it looks like the connection for the screen/digitizer (not sure on hardware) is located right behind red end call/power button and from being mashed off,on,off,on,etc loosens/damages connection.
or is the hardware screen issue just a complete shot in the darks chance?
OH ... ive had the software issue (fixed as i mentioned earlier) AND unrepairable (with my limited tools and balls to physically tear into this badboy) hardware issues.
Click to expand...
Click to collapse
Sent from my HTC HD2 using XDA App
Compatibility Mode
I also have this issue, therefore I just recently flashed my hd2 with Tytung's 4.0 ICS Rom. As expected, this didn't help very much.. What I am now going to try before I send my phone to HTC is to disable compatiblity mode. BUT, I can't seem to find this compatibility mode check anywhere. Could someone please guide me there?
..
Windows 7
I will be flashing my phone with w7 now, to see wether this is an android kernel bug / softare issue or if this relates to hardware. I also see a lot of people saying that after fixing the digitizer it works again, so it might actually be a hardware issue. I will post my feedback when I have tried with w7.
Related
Hello everyone,
Lately I'm having a lot of issues with my HTC TyTN while in the past I didn't have any. I believe they all started when I upgraded to WM6, but the thing is I don't want to downgrade. However, what makes me think twice about it is the fact that I dropped it down few weeks back and there's a major scratch down at the bottom of the screen where touch screen there doesn't work and when you press there it goes a bit to the left or right accordingly...! The screen needs calibration like all the time because it's not accurate.
Moreover, sometimes the hardware keyboard doesn't work and I need to make my phone sleep and then wake it up again and it would work. Last night I also got a key locked.. and it wouldn't work until I made my phone sleep and then work again.
Additionally, if my phone is locked, and I receive a phone call, and while talking to the phone I receive a message, when the phone call ends the phone is like crashed and I need to make it sleep and wake up so that it works well again.
Anyone who can give me any kind of suggestions or advices on how to solve or decrease the problems please?
Thank you.
None of those problems are WM6 problems.
You said you dropped your phone so i think its a hardware fault? Coz for me WM6 save's my HTC 8525 from bricked and now works fine.
You think? I think the screen alignment problems might be due to dropping the device on the ground once but I doubt the rest are. I believe they are driver bugs from WM6.
Do you think I should take it to get fixed? Would my warranty cover that?
Anymore have an opinion on the matter, please reply. Thanks.
Moreover, sometimes the hardware keyboard doesn't work and I need to make my phone sleep and then wake it up again and it would work.
Click to expand...
Click to collapse
I had the same, when I used WM 5.0 (it happens on three diffrent devices - all of them comes from T-Mobile UK) - after upgrade WM 6.0 (Schaps) it's still happens, but very rarely.
Drivers might be part of the problem, but I think dropping it has played a big part.
If it was me I'd downgrade to the original setup (follow MrVanx's guide) and try that. If the problems persist they are hardware related, but you are in a position to try for warranty because of original set-up. If the problems go away, upgrade again and try to isolate which bit of software caused the problems.
But the reality is that if you've dropped your phone hard enough to scratch the screen that's probably the root of the problem which is probably not covered under warranty anyway...
Well it wasn't that hard hit on the ground, it's the fact that there was a tiny rock on the ground and that's where the screen hit...!
I have the same problem. Dropped it for about six months ago. The problems started just a couple of weeks ago. Strange. I'm gonna try the waranty. Even if I have a few scratches. Also my speaker doesn't work anymore.
Any more suggestions/ideas?
My first response is the definitive response.
If you are still concerned that WM6 is the problem, then go back to WM5.
hi all, i bought a tytn at ebay, but
the after a short time of using the bottom buttons, they stop working.
touch screen and buttons on the side are stíll working, but the bottom buttons are dead.
sometimes after turning off amd turning on they are working for a short time again. a restart also helps to make them work.
but its not funny to restart every 10 minutes.....
it is an e-plus tytn from germany with wm5.
do u guys think that it is a hardware or a software error?
I seem to have this problem on and off myself and think it's related to either the rom on the phone or the radio rom but am not sure which. It seems sometimes I have this problem and it seems to come and go depending on what combination of rom/radio rom I have installed. If I was smart I'd find a combination that works well for me and stick to it but I always like to play with things so typically every day or two I'm reseting
yeah, i have the same problem.... i hate to restart the phone every now and then, but I need to figure this out sometime soon, or I'm gonna upgrade to WM6 to see if that solves my problem. lol...
did anybody else have an idea to solve the problem?
crutav said:
did anybody else have an idea to solve the problem?
Click to expand...
Click to collapse
http://cnn.cn/shop/8525tytn-flex-cable-p-1732.html
I opened up my tytn, to find out the problem, and I found a small crack in the flexcable mentioned above.
Before it was never opened nor did anything strange happen with it, so this seems to be yet an other production problem/fault..
More and more people seem to have the same problem, time to presure htc for a repair....
Ok for me this is too late, but all for the good cause.. will just order myself a new cable and try to swap it..
Any ideas where to get the flex cable these days? Not finding it at the link above and internet searches aren't panning out either.
FYI:
Just got back my HTC TyTN from service under warranty, sent for exactly the same problem.
The technician I spoke to directly said that maybe about 90% of the lower keys malfunctions are caused by the lower keyboard board behaving erratically and it is a well-known hardware problem.
A board replacement solved it, my TyTN is working perfectly again, they also replaced the stylus holding rubber (which was broken already from the early days) and, surprise, they upgraded my WM5 device (I had to revert everything to the initial versions before handing it to them) to the latest official HTC WM6 Rom. Even bigger surprise, although what I gave them was a WWE device, when I got it back they had upgraded it to the localized (official Greek) version. Life is good.
Anyways, seems the only real solution to this is a visit to the repair store, hopefully under warranty and reverted back to the original settings...
Hi Guys, i have a strange Problem since a couple of days.
The touch HD turns itself off after some minutes. I have to take out the battery and put it back in, otherwise it will not turn on...
i have:
- deactivated automatic shut down in power settings
- deactivated today timeout
- tried hardreset
- tried another rom (currently dutties final)
no success :-(
i have absolutlely no clue what could cause this and how i can fix it...
help is highly appreciated.
hello there , actually maby its a virus or there is problem in SPL
Try to install again the SPL modified and tell me
best regards
ms4cah
unlikely it has anything to do with SPL. it was fine for months, i had not flashed or installed anything.
it seams dead now by the way. i cannot turn it on again.
i also tried a new battery. it doesnt even charge, no light at the power button. nothing.
Surrido said:
unlikely it has anything to do with SPL. it was fine for months, i had not flashed or installed anything.
it seams dead now by the way. i cannot turn it on again.
i also tried a new battery. it doesnt even charge, no light at the power button. nothing.
Click to expand...
Click to collapse
Sounds like a warranty claim
I am getting the same problem!! is there anything i can do to fix this? anyone figured out the reason?
I had this sort of problem.
The HD would hang, then switch off, then to get back on I had to remove the battery for a while. Sometimes it worked after a minute, other times I had to leave the battery disconnected for longer.
So I performed a hard reset and it switched itself off during boot (after successfully resetting).
Battery out for a while.
H/R once more. Again crashed during boot but not at the same point as previous.
Tried a different battery with a full charge - same result.
Tried to re-flash a "very popular" custom ROM with USPL. Got to 1% and error. This was because the HD had crashed..
Tried to flash the official HTC ROM and it got to 15% and error. HD crash.
So I have contacted HTC and they are sending a courier to collect it so they can take a look with a view to repairing it.
The last ROM I successfully loaded about 2 weeks prior to the start of my problems was a custom win mo 6.5 rom. As I couldn’t get it to a stable state - I couldn’t flash the official HTC ROM.
I’ve convinced myself it’s a hardware fault rather than any software damage..
Although I fear I’ll be in for some bad news.
mine too
Hi,
I have the same problem.
Mine was doing hard reset and after a day or two the same problem.
Now I cannot turn it on.
I will send it to htc...
Crossing my fingers.
I had the same problem with mine...
While turned on, it automaticly tryed to turn of, as if something was pressing the on/off buttom. Everytime that message for turning it off poped up and I just couldn't control the on/off button anymore.
I tryed everything and nothing worked. It really seemed a hardware and warranty claim issue. However, since I bought it abroad and it does not have warranty here in Brazil, I just decided to sell it (obviously warning the buyer about the issue) and to buy another one (which is working as a charm).
It is a hardware issue, for sure...
So my HD has been away at HTC for nearly a week, and im currently tracking its return journey, due to land back here at some point this morning.
I have had no contact from HTC so its going to be a suprise as to whether anything has been repaired.
My hope was they couldn't turn it on at all - thus replacing the bits n bobs inside, replacing the main board containing my 6.5 ROM.
So for now im hoping "no news will be good news", but I will update this when I have it back.
... I've the same problem...
Hi, I've the same problem. Do you have any solutions?
Nasher79 said:
So my HD has been away at HTC for nearly a week, and im currently tracking its return journey, due to land back here at some point this morning.
I have had no contact from HTC so its going to be a suprise as to whether anything has been repaired.
My hope was they couldn't turn it on at all - thus replacing the bits n bobs inside, replacing the main board containing my 6.5 ROM.
So for now im hoping "no news will be good news", but I will update this when I have it back.
Click to expand...
Click to collapse
Just recieved delivery. The service report states:
1. Diagnosis
2. Replace Main Board
3. Function Test
Result
Confirms it was a H/W fault and my "flashing" did not effect the warranty status. That may have been because they couldnt get far enough to confirm so.
Mega75 said:
Hi, I've the same problem. Do you have any solutions?
Click to expand...
Click to collapse
Other than a Warranty repair, im afraid not. Try your best to get it back to HTC official software, then report it as no power / cant boot.
Nasher79 said:
Just recieved delivery. The service report states:
1. Diagnosis
2. Replace Main Board
3. Function Test
Result
Confirms it was a H/W fault and my "flashing" did not effect the warranty status. That may have been because they couldnt get far enough to confirm so.
Click to expand...
Click to collapse
Good to know, confirmed h/w issue
i simply deactivated automatic shut down in power settings as mentioned in the first post and unistalled a couple of new programs i had recently installed!!
Not quite sure which of the above worked.. but atleast for now it seems to be working fine!! the screen has not turned off by itself and i have not had to remove battery etc to get it to work again!
I'm not quite sure if the problem is properly fixed but it has been a few days since anything occurred!! so fingers crossed!!
mine was doing this last tuesday, each time i went into my pocket for it, it was turned off, then i hard to do the reset pin or remove the battery, it has been ok since, i just thought, maybe it was me, pushing it in my jeans i might be turning it off.
also using duttys popular 6.5 latest rom, i dont think its fair to blame his rom, as mines ok now, maybe i should reflash it again?? im still waiting for a new version to be released.... JESUS!!! just looked it up to r12, im on r9 .
oh no... no it not..... says to go here, and it will be released here and not on dutty throy???
http://htcpedia.com/forum/forumdisplay.php?f=79
iamdarren said:
mine was doing this last tuesday, each time i went into my pocket for it, it was turned off, then i hard to do the reset pin or remove the battery, it has been ok since, i just thought, maybe it was me, pushing it in my jeans i might be turning it off.
also using duttys popular 6.5 latest rom, i dont think its fair to blame his rom, as mines ok now, maybe i should reflash it again?? im still waiting for a new version to be released.... JESUS!!! just looked it up to r12, im on r9 .
oh no... no it not..... says to go here, and it will be released here and not on dutty throy???
http://htcpedia.com/forum/forumdisplay.php?f=79
Click to expand...
Click to collapse
FYI, Throy is releasing roms exclusively to HTCPedia now, so no future roms will be released on either XDA or www.duttythroy.com
wow!!! i never knew!!!! thats crazy as his own site duttythroy wont be used.
im getting it now, but only 11 when it says 12 is out, either way, i will still flash i love the roms, i will be sure to be on all the site, incase theres another change of heart??
anyway guys i will report if i noticed the shutdown thing happening again with the version. 4mins till downloaded.....
I think theres a couple of different issues here. My own problem was due to faulty parts in the hardware itself. Absolutley nothing to do with any ROM, only reason I mentioned them was because of the invalid warranty possibility.
If your problem was ROM related, Im sure in the relevant ROM thread, there would be many people (everyone) with the same issue. Thats not to say that its not some sort of conflicting software you may have installed after the ROM flash.
Some simple troubleshooting steps:
1. Hard reset - If it still has a problem...
2. Flash Official HTC ROM - If still a problem...
Phone HTC.
All the best, hope you manage to get something to work for you. I know how lost I felt without mine!
Nasher79 said:
I think theres a couple of different issues here. My own problem was due to faulty parts in the hardware itself. Absolutley nothing to do with any ROM, only reason I mentioned them was because of the invalid warranty possibility.
If your problem was ROM related, Im sure in the relevant ROM thread, there would be many people (everyone) with the same issue. Thats not to say that its not some sort of conflicting software you may have installed after the ROM flash.
Some simple troubleshooting steps:
1. Hard reset - If it still has a problem...
2. Flash Official HTC ROM - If still a problem...
Phone HTC.
All the best, hope you manage to get something to work for you. I know how lost I felt without mine!
Click to expand...
Click to collapse
Your exactly right. Some people experience similar symptoms which are rom related others have same problem which is hardware related. One can only be fixed by HTC as motherboard problem, other can be rectified by different means without having to send device back for repairs
Hi again,
Today I have received an sms from HTC service informing me that my HD has a circuit problem and they will fix it without any charge.
I have to wait.
Starting today, my touchscreen just doesn't register anything. It's not cracked or damaged at all. It just stopped responding. I can still use my dpad but my phone is extremely limited at this point.
I'm currently running Myn's Warm Eclair: http://forum.xda-developers.com/showthread.php?t=691174
I really don't want to format my phone to figure out if it's a software problem but does anyone know if this is just a problem with this android build or with android on our phone in general?
thehelios said:
Starting today, my touchscreen just doesn't register anything. It's not cracked or damaged at all. It just stopped responding. I can still use my dpad but my phone is extremely limited at this point.
I'm currently running Myn's Warm Eclair: http://forum.xda-developers.com/showthread.php?t=691174
I really don't want to format my phone to figure out if it's a software problem but does anyone know if this is just a problem with this android build or with android on our phone in general?
Click to expand...
Click to collapse
It has been a problem for me with some builds. I suggest you to make a backup with some app like Titanium Backup and reinstall Android. Try with different kernels if you still have the problem. Don't worry for the moment!
I have had this problem a few times. I still can't quite figure out exactly what makes it happen but it seems to be something to do with sleep. My solution is to restart and go into NAND then do a backup apps and then quit. something gets woken up in the screen and it starts to work again. No idea why, it just does. Good luck.
So I guess my touchscreen is just dead. I reinstalled android, reflashed my phone for the froyo rom, and I even flashed a windows rom onto my phone but nothing. I even opened my phone to see if it was connected properly to the mobo but all seems right.
On the windows rom, when it does the screen calibration, I can mash the crap out of my screen and I guess it picks up some sort of signal every now and then because the crosshair moved.
If anyone knows anything about this, please reply. I don't really want this to be the end of my vogue. It's been a good 3 years so far!
http://cgi.ebay.com/Touch-Screen-Di...749473?pt=PDA_Accessories&hash=item439b537fa1
You may just need a new Digitizer.
Can get them pretty cheap on e-bay - just have to wait since coming international mail.
I am having similar problems. Usually when the phone goes to sleep and I wake it up the touch screen is unresponsive. Only way to get touch to respond is to reboot.
I have tried it on my vogue on both the fresh froyo and experimental fat free froyo using both the 10-9 and 9-29 kernel on nand. I have also used nbh editor to change the panel types (vogue uses auto detect so I changed it to Polaris) and still the same problem. I thought perhaps there was a problem with a program but I have no programs installed right now and the problem still persists.
Does anyone have any suggestions? My phone was working fine up to a few weeks ago and I would hate to be forced to use windows again. I have reinstalled windows and it works fine there so I don't think it is hardware related. It seems something happens when it goes to sleep.
Well there might be a driver issue. Try going back to the stock rom for your device and see if the touchscreen works, if it doesn't work, then it's probably broken. Try opening the vogue and disconnecting and reconnecting and then turning your device back on and test it again. if it still doesn't work, then yea you will have to get a new digitizer.
You can also try using other releases/roms with different kernels.
good luck!! and may your vogue live on!!
Thanks, I've installed a windows rom and the touchscreen has no issue there so it leads me to believe it is not the digitizer, especially because it seems to break when it goes to sleep.
I will try even older kernels and perhaps a donut build to see if the problem still exists.
Try to figure out when things broke for you by trying the kernels that have been released over the past month. Maybe we can isolate the change that broke things for you. Maybe not, but it's worth a try.
n2rjt said:
Try to figure out when things broke for you by trying the kernels that have been released over the past month. Maybe we can isolate the change that broke things for you. Maybe not, but it's worth a try.
Click to expand...
Click to collapse
Hi! I had this problem, that was the reason why I put back WM. I experienced it using .32. I think it was from 1-Oct-2010 approximately when it started to fail.
IT'S A CONSPIRACY!!!! Last week my screen broke as well. I was running "not so super froyo" and it would work for a second then just be completely unresponsive... needless to say I now have a droid x *fap**fap*
My screen suddenly became unresponsive and won't slide/unlock. The buttons work though, and I did the soft reset but after the boot it goes locked automatically. I am using this build http://forum.xda-developers.com/showthread.php?t=954030 but i don't think that's the problem since my phone worked 100% for a month while using that build. What should i do? should i get a new LCD? a new Digitizer?
abbadipod said:
My screen suddenly became unresponsive and won't slide/unlock. The buttons work though, and I did the soft reset but after the boot it goes locked automatically. I am using this build http://forum.xda-developers.com/showthread.php?t=954030 but i don't think that's the problem since my phone worked 100% for a month while using that build. What should i do? should i get a new LCD? a new Digitizer?
Click to expand...
Click to collapse
First try another build or possibly Windows Mobile and see if you still have no touch response.
If you don't its likely that the digitizer connection is faulty. This is a very common fault as the connector lays under the power/back buttons and if these are pressed excessively or over a period of time on some occasions you can break the digitizer connection.
Im having the same problem again and I don't know what to do...Has anyone had this happen to them and do something to fix it or know of something that could help...
Its guaranteed a hardware issue. Had to send my phone in on warranty and got sent a refurbed model. There are methods that you can attempt yourself towards the goal of fixing it, but disassembling the hd2, even with all the tutorial videos, seems incredibly daunting, especially the step that involves putting your phone into a special oven. Aside from that there are numerous reports from people who have gone through with the dis/reassemble process who manage to fix their issue, yet at the same time create a new issue that is equally unlikely to be repaired without causeing further problems