DZ09 Smartwatch requires both Simcard from Cellphone provider and the SDC Micro Memory chip in order to access all the features on the Smartphone and to update it. I found this out after extensive attempts without having the Memory chip installed. Hope this help some that have been experiencing issues with their DZ09 Smartwatch.
Related
So I bought this chines watch it's called v360 the system runs on a soc Its from mtk the problem is I can't connect it to android wear it keeps saying updating and most apps don't go to the watch and the watch faces isn't even there
Hello everyone, I recently bought an erisin es3009f lollipop with Android 5.1.1. I found some small problems like the bluetooth that often disconnected from the radio unit, the radio reception is not very good and you have to put an amplified antenna ... (but these things happen to most car radios made in China). A more serious problem is that the radio unit does not read any usb pen nor the front slot nor by the two rear slots ..... The usb flash drive is recognized by the system (only for a while) only if I unplug the power supply unit and then I plug in again ... Is there anyone who has the same problems ??? There is someone to share something on this Android system ??? Thank you all!!!
castellino61 said:
Hello everyone, I recently bought an erisin es3009f lollipop with Android 5.1.1. I found some small problems like the bluetooth that often disconnected from the radio unit, the radio reception is not very good and you have to put an amplified antenna ... (but these things happen to most car radios made in China). A more serious problem is that the radio unit does not read any usb pen nor the front slot nor by the two rear slots ..... The usb flash drive is recognized by the system (only for a while) only if I unplug the power supply unit and then I plug in again ... Is there anyone who has the same problems ??? There is someone to share something on this Android system ??? Thank you all!!!
Click to expand...
Click to collapse
Hello,
I have bought this device and installed successfully in my Mondeo 2007. I connected only the FAKRA connector, I did not use any additional cables. I set all DIP switches to OFF ( I do not have camera at the back). I have checked the radio, the sd card in the front slots, bith are OK no issue. I cheked the BT for phones and A2DP works fine. I recommend to review the Factory settings where you can check several options. Radio signal sounds OK so far but I need more time to check. Concerning the SD cards, these are FAT32, better to insert to the device 1st and let Android to detect. I have installed microSDHC 32 GB without any issue.
rgds,
Lacxx
it seems that there is another 5.1 watch but if you look at the link - it seems that this one has the capability to answer calls from the watch, but i'm not sure about the water resistant and the sd card slot (contact the seller).
http://www.aliexpress.com/item/Andr..._8&btsid=e5e02225-9cf3-438a-b420-de058d1b190a
Hi all,
can someone help me identify this headunit and perhaps help me fixing its severe slowness.
as far as i can investigate it seems that its an android 7.1.1 allwinner t3 with 2gb ram and 16GB of storage, however the form of the headunit is different from what i can found on the internet, i have volume
i managed to install cpu z from its playstore and somewhat update its google services but its slow enough to put you on madness
please help, i tried to install google maps its slow but working. the bluetooth app for call is a problem on it self only basic dialer options. the mic is terrible and when i install voice assistant it says that the device isn't compatible...can someone identify this headunit and perhaps help me rooting it. the headunit take 30s before starting
the radio is good however but i can't change the default radio app eitheir
Hello dear friends. My headunit is this one https://www.aliexpress.com/item/32972656000.html?spm=a2g0o.order_list.0.0.21ef1802BpouAa
Specs:
9212B_00020_V001 / Android 9.1 Car Edition / XY AUTO J7.3 / 1GB-16GB / CAN Pro 9.0.2 .
My big problem is that i can't install CanBus (CAN PRO: 9.0.2 disconnect).
I ordered from Ali this one : https://www.aliexpress.com/item/1005004121186291.html?spm=a2g0o.order_list.0.0.21ef1802H1XVko
But , in factory settings -> Protocol, there isn't any option to select for this CanBus (OUDI).
I sent message to both sellers to help me , but i haven't any answer yet.
My car is Opel Combo C (2005) and the. factory stereo was CD30. Pleaseeeee , can anyone help me with that?
1. Do i have to change the pins in harness?
2. Can anyone upload/share the Canbus folder with host and plugins?
3. I have upgrade the software from 1.000 to 1.008 and the model list, but when I try to confirm Opel (OUDI doesn't have Combo model), just loading and appears a message about connection.
We had the same problem, you just had to go into settings, hard manager, and there's a CANBus file where you have one or two apps to install. Now in your situation, you have nothing to do but reinstall your Android. Alone is very hard (I say it from my own experience), many applications drivers to install, pc laptop performance, and if you did something wrong.... He's gone. You need to look for a company that does that in your city or nearby, or if not like I did. Contact the people from whom you bought the device and agree to reinstall it for free or in exchange for a sum of money.I just have reinstalled my Android on two devices... Free... It only cost me to send them to China, and a lot of patience. From July 5 only two days ago I received the two motherboards. One more thing you need to have basic knowledge to know how to dismantle the motherboard. I hope it was helpful to you with something... Good luck. Michael