Related
Don´t know if anybody had this kind of Problem before. Couldnt find anything.
Was on Stock V image with cutom kernel flashed via fastboot and SU flashed via fastboo boot to root.
Problem:
bootet TWRP via fastboot with newest drivers. Flashed RC via booted TWRP.
Wanted to reboot system, but was stuck in a TWRP bootloop. No chance to boot into bootloader also. Even tried changing slots in twrp but still only bootloop to twrp.
Than I thought about sideload because that's what I did with latest ota image from Google.
Here is what I did:
sideloaded the ota.zip via TWRP from PC "adb sideload ota_file.zip" ota_file should be the name of your ota file
It gave me an error, but after rebooting system all fine again. Back to stock V and bootloader is there again.
Easier thing to do is flash boot.img from the factory image to boot_a and boot_b if you are having issues.
This problem occurs when you flash TWRP if you have root installed. To avoid, remove root before installing TWRP.
Oh, I should mention to get into bootloader from TWRP, simply use the adb command "adb reboot bootloader". Should work, worked for me.
I just have avoided flashing TWRP altogether. I rarely need to flash anything, so it can wait until I am at work or home to use a PC to BOOT TWRP each time I need it, instead of flashing it.
Nitemare3219 said:
I just have avoided flashing TWRP altogether. I rarely need to flash anything, so it can wait until I am at work or home to use a PC to BOOT TWRP each time I need it, instead of flashing it.
Click to expand...
Click to collapse
Until it gets a little more stable on the Pixel, this is probably a good idea.
Good idea. But I M sometimes flashing when I am at or on the way to work.
Flash junkie needs his daily dosis
mikaole said:
Don´t know if anybody had this kind of Problem before. Couldnt find anything.
Was on Stock V image with cutom kernel flashed via fastboot and SU flashed via fastboo boot to root.
Problem:
bootet TWRP via fastboot with newest drivers. Flashed RC via booted TWRP.
Wanted to reboot system, but was stuck in a TWRP bootloop. No chance to boot into bootloader also. Even tried changing slots in twrp but still only bootloop to twrp.
Than I thought about sideload because that's what I did with latest ota image from Google.
Here is what I did:
sideloaded the ota.zip via TWRP from PC "adb sideload ota_file.zip" ota_file should be the name of your ota file
It gave me an error, but after rebooting system all fine again. Back to stock V and bootloader is there again.
Click to expand...
Click to collapse
I know its already solved, but here is what helps (for future):
Just flash SuperSU (latest Version)
Done. This will patch the boot.img so your phone boots in the OS again.
Shadow of Destiny said:
I know its already solved, but here is what helps (for future):
Just flash SuperSU (latest Version)
Done. This will patch the boot.img so your phone boots in the OS again.
Click to expand...
Click to collapse
I have this issue and flashing supersu didn't fix my problem. Will go to factory image flashing.
Shadow of Destiny said:
I know its already solved, but here is what helps (for future):
Just flash SuperSU (latest Version)
Done. This will patch the boot.img so your phone boots in the OS again.
Click to expand...
Click to collapse
Thanks! This worked for me.
EDIT: Never mind, I missed the comment guiding ppl to flash SuperSU. I suppose that when this thread was posted, that SuperSU was still being used instead of Magisk, so solution is essentially the same thing I'm recommending.
I think this thread is missing the much easier solution here:
I just ran into this issue with my Pixel 2 XL when I tried to update my TWRP version from 3.2.1-2 to 3.2.3-0. Here's how it went:
1. Downloaded the TWRP zip, md5 and so on from the official TWRP website for the Pixel 2 XL
2. Booted to TWRP and installed / flashed the zip of TWRP 3.2.3-0
3. Wiped dalvik and then chose Reboot to System from TWRP -- the phone booted right back into TWRP
4. Tried again to reboot the same way. Same result.
5. Installed / Flashed the 3.2.1-2 TWRP zip which was still on my phone, in order to revert to the previous version, and then Rebooted to System -- same result
6. Flashed 3.2.3-0 zip again, then flashed the Flash Kernel that I've been using, and then Flashed the Magisk v16.0 zip that I used to root, then chose Reboot to System -- AND IT WORKED; the phone booted normally and now I'm updated to the latest TWRP successfully.
tl;dr - The solution is to flash Magisk again after updating TWRP. Pretty sure this goes for kernel updates too.
cognitivedissonance said:
EDIT: Never mind, I missed the comment guiding ppl to flash SuperSU. I suppose that when this thread was posted, that SuperSU was still being used instead of Magisk, so solution is essentially the same thing I'm recommending.
I think this thread is missing the much easier solution here:
I just ran into this issue with my Pixel 2 XL when I tried to update my TWRP version from 3.2.1-2 to 3.2.3-0. Here's how it went:
1. Downloaded the TWRP zip, md5 and so on from the official TWRP website for the Pixel 2 XL
2. Booted to TWRP and installed / flashed the zip of TWRP 3.2.3-0
3. Wiped dalvik and then chose Reboot to System from TWRP -- the phone booted right back into TWRP
4. Tried again to reboot the same way. Same result.
5. Installed / Flashed the 3.2.1-2 TWRP zip which was still on my phone, in order to revert to the previous version, and then Rebooted to System -- same result
6. Flashed 3.2.3-0 zip again, then flashed the Flash Kernel that I've been using, and then Flashed the Magisk v16.0 zip that I used to root, then chose Reboot to System -- AND IT WORKED; the phone booted normally and now I'm updated to the latest TWRP successfully.
tl;dr - The solution is to flash Magisk again after updating TWRP. Pretty sure this goes for kernel updates too.
Click to expand...
Click to collapse
This is a Pixel XL forum.
Homeboy76 said:
This is a Pixel XL forum.
Click to expand...
Click to collapse
Aren't the two systems (Pixel OG and Pixel 2) extremely similar? If they're not, then my advice should be ignored for anyone using the Pixel OG.
So I just updated to the latest xt1644 Nougat JP25.93.14-4 and am having an issue installing TWRP and getting it to stick. I installed it and even did a backup, but once I boot to System and then back to bootloader, and finally to recovery, it goes back to stock recovery. Also I am unsure of how to root this device now with Nougat. I've seen on a few sites differing methods. One site had a download for what they called a root package and it was a SuperSU 2.76 version. Another site said to use Phh SU and just install TWRP and then flash Phh. I don't want to mess anything up, can someone point me in the right direction since it seems everything in this forum is for a device other than the XT1644. Lastly, is it possible to revert back to Marshmellow using fastboot, or is that now not possible? I have unlocked my bootloader, obviously. Thanks.
After flashing TWRP you have to manually boot to TWRP without booting to system first. For rooting you have to flash ElementalX or Vegito Kernel and then flash SuperSU v2.79 SR3 or Magisk v12
.
tywinlannister7 said:
After flashing TWRP you have to manually boot to TWRP without booting to system first. For rooting you have to flash ElementalX or Vegito Kernel and then flash SuperSU v2.79 SR3 or Magisk v12
.
Click to expand...
Click to collapse
I did manually boot it. I went back to bootloader, then choose recovery again and it goes back to TWRP. After I boot to system is when the issue occurs. If I go back to bootloader after booting to system, that is when I have the problem. Once I try to go into recovery again it goes to stack recovery. I am trying to install TWRP 3.0.2.0 Athene.
robn30 said:
I did manually boot it. I went back to bootloader, then choose recovery again and it goes back to TWRP. After I boot to system is when the issue occurs. If I go back to bootloader after booting to system, that is when I have the problem. Once I try to go into recovery again it goes to stack recovery. I am trying to install TWRP 3.0.2.0 Athene.
Click to expand...
Click to collapse
try latest twrp 3.1.0
I got it working. I had originally set it to read only and I think that was the issue. Reinstalled it and mounted system and then choose to allow modifications. It then worked. Now onto root, we will see how that goes.
Sent from my XT1575 using Tapatalk
tywinlannister7 said:
try latest twrp 3.1.0
Click to expand...
Click to collapse
When rooting do you still do the little systemless trick or is that already accounted for. Does the elemental X kernel play well and is it nice and stable? Thanks for the info.
Sent from my XT1575 using Tapatalk
robn30 said:
When rooting do you still do the little systemless trick or is that already accounted for. Does the elemental X kernel play well and is it nice and stable? Thanks for the info.
Sent from my XT1575 using Tapatalk
Click to expand...
Click to collapse
If you're using SuperSU v2.79 SR3 beta ( https://forum.xda-developers.com/apps/supersu/2014-09-02-supersu-v2-05-t2868133), this already is configured for systemless, and if you're going for SuperSU, that's the version I recommend. Any versions below 2.79 SR3 appear to have created boot issues on Nougat (or required the echo systemless command to work).
ElementalX (1.0.4 stock is what you want) is stable and is essential for rooting. Don't try to root your device without flashing a custom kernel like ElementalX or vegito, else if you try to root the stock Nougat kernel, you'll likely trip anti-root kit/anti-rooting security (dm-verity, I recall?) and will prevent your device from booting. By flashing ElementalX or vegito, you'll bypass that security.
A useful checklist to follow is in this guide here: https://forum.xda-developers.com/mo...de-root-moto-g4-plus-supersu-android-t3587918 Having a newer version of TWRP shouldn't matter (and in fact may present less issues). With step 6, you may choose to flash either magisk or SuperSU as mentioned by tywinlannister7 (I've not had experience with phh superuser, so cannot comment). If, at some point in the future, you wish to swap rooting methods, I'd suggest following the recommended unrooting procedure for your existing root manager (e.g. unrooting from the SuperSU app settings, or flashing the magisk uninstaller, check their respective pages on XDA) before changing root managers. I've used the aforementioned checklist to root a XT1642 on Nougat without issue.
As for downgrading your system to Marshmallow if you so choose, that is possible. Verify the MM firmware you need (a selection for XT1644, retus channel devices, is here https://mirrors.lolinet.com/firmware/moto/athene/official/RETUS/) and use that firmware with a guide like this: https://forum.xda-developers.com/moto-g4-plus/how-to/guide-downgrade-to-marshmallow-nougat-t3515961 If you're using fastboot rather than mfastboot, replace mfastboot in the provided script with fastboot.
EDIT - no worries @pastorbob62 - good to have another member verifying information
robn30 said:
When rooting do you still do the little systemless trick or is that already accounted for. Does the elemental X kernel play well and is it nice and stable? Thanks for the info.
Sent from my XT1575 using Tapatalk
Click to expand...
Click to collapse
NO! NO! NO! Do not use the systemless root method. That is for Marshmallow ONLY!. You will not be able to boot into the system after trying that and you may have to go all of the way back to flashing stock from fastboot to fix it.
ElementX-G4 kernel plays well with Nougat stock. I ran it with stock Nougat for a couple of weeks on my XT1625 without any major issues. So flash it from TWRP. Be sure you have the correct version. Then boot to system to check it out. Next reboot to TWRP and flash SuperSU 2.79. Boot back to the system. It will probably boot a couple of times before the system comes up. Don't panic. You should be good to go.
Edit: Sorry echo92. I was typing my reply at the same time you were. :good:
echo92 said:
If you're using SuperSU v2.79 SR3 beta ( https://forum.xda-developers.com/apps/supersu/2014-09-02-supersu-v2-05-t2868133), this already is configured for systemless, and if you're going for SuperSU, that's the version I recommend. Any versions below 2.79 SR3 appear to have created boot issues on Nougat (or required the echo systemless command to work).
ElementalX (1.0.4 stock is what you want) is stable and is essential for rooting. Don't try to root your device without flashing a custom kernel like ElementalX or vegito, else if you try to root the stock Nougat kernel, you'll likely trip anti-root kit/anti-rooting security (dm-verity, I recall?) and will prevent your device from booting. By flashing ElementalX or vegito, you'll bypass that security.
A useful checklist to follow is in this guide here: https://forum.xda-developers.com/mo...de-root-moto-g4-plus-supersu-android-t3587918 Having a newer version of TWRP shouldn't matter (and in fact may present less issues). With step 6, you may choose to flash either magisk or SuperSU as mentioned by tywinlannister7 (I've not had experience with phh superuser, so cannot comment). If, at some point in the future, you wish to swap rooting methods, I'd suggest following the recommended unrooting procedure for your existing root manager (e.g. unrooting from the SuperSU app settings, or flashing the magisk uninstaller, check their respective pages on XDA) before changing root managers. I've used the aforementioned checklist to root a XT1642 on Nougat without issue.
As for downgrading your system to Marshmallow if you so choose, that is possible. Verify the MM firmware you need (a selection for XT1644, retus channel devices, is here https://mirrors.lolinet.com/firmware/moto/athene/official/RETUS/) and use that firmware with a guide like this: https://forum.xda-developers.com/moto-g4-plus/how-to/guide-downgrade-to-marshmallow-nougat-t3515961 If you're using fastboot rather than mfastboot, replace mfastboot in the provided script with fastboot.
EDIT - no worries @pastorbob62 - good to have another member verifying information
Click to expand...
Click to collapse
Thanks for all the information, it is very much appreciated. Thanks to pastorbob62 as well. This information will be very useful.
Sent from my XT1575 using Tapatalk
pastorbob62 said:
NO! NO! NO! Do not use the systemless root method. That is for Marshmallow ONLY!. You will not be able to boot into the system after trying that and you may have to go all of the way back to flashing stock from fastboot to fix it.
ElementX-G4 kernel plays well with Nougat stock. I ran it with stock Nougat for a couple of weeks on my XT1625 without any major issues. So flash it from TWRP. Be sure you have the correct version. Then boot to system to check it out. Next reboot to TWRP and flash SuperSU 2.79. Boot back to the system. It will probably boot a couple of times before the system comes up. Don't panic. You should be good to go.
Edit: Sorry echo92. I was typing my reply at the same time you were. :good:
Click to expand...
Click to collapse
One other thing, can I back up the stock kernel? Or at least find it somewhere for download. Is this something I can backup using TWRP? Thanks again.
Sent from my XT1575 using Tapatalk
robn30 said:
One other thing, can I back up the stock kernel? Or at least find it somewhere for download. Is this something I can backup using TWRP? Thanks again.
Sent from my XT1575 using Tapatalk
Click to expand...
Click to collapse
Got it figured out. Backing up my boot.img via TWRP ensures my stock kernel is safe. Already installed elemental X and SuperSU and all went perfectly smooth. Thanks again for the links.
Sent from my XT1575 using Tapatalk
robn30 said:
Got it figured out. Backing up my boot.img via TWRP ensures my stock kernel is safe. Already installed elemental X and SuperSU and all went perfectly smooth. Thanks again for the links.
Sent from my XT1575 using Tapatalk
Click to expand...
Click to collapse
You are very welcome. Glad you got it figured out and all is working well. :good:
Hey guys... I know I am late to the thread but if you see this, can you inform me how can I receive updates afterwards? I currently have twrp with elementx kernel and Magisk. And there is a security patch out for the phone. How can I install that?
1emrys1 said:
Hey guys... I know I am late to the thread but if you see this, can you inform me how can I receive updates afterwards? I currently have twrp with elementx kernel and Magisk. And there is a security patch out for the phone. How can I install that?
Click to expand...
Click to collapse
Generally you'd have to revert back to a clean stock ROM, no TWRP, no ElementalX, no magisk. The stock ROM also needs to be in a read only state (no modifications allowed in TWRP) and cannot be debloated (OEM partition needs to be untouched).
You could revert back to a TWRP backup made before you flashed ElementalX, provided you did not let TWRP make modifications. You'd also have to find a stock recovery (if you flashed TWRP), and restore a stock logo.bin as well if you flashed a custom logo.bin to hide the bootloader warning. Then, you should be able to apply OTA/security updates. Attempts to apply OTA updates with TWRP on your device will likely fail and leave you in a soft bootloop unless you boot via the bootloader. You could try this to break the bootloop: https://forum.xda-developers.com/moto-g4/help/troubleshooting-twrp-boot-loop-ota-t3714325
The easiest and safest method I've found is to re-flash the stock ROM you have. Ensure this is the same firmware as you currently have and the latest firmware that you've flashed onto your device (don't downgrade your firmware if possible). You can re-flash without erasing your data by omitting the fastboot erase userdata command. However, I would recommend you back up your device anyway (e.g. in TWRP) and any important files, as although this procedure should not affect your data with that command omitted, any firmware flash has the possibility of affecting your device stability. That may require a factory reset/device wipe to fix. Backing up your data should be standard policy when it comes to flashing anything affecting your device's system/underlying firmware.
After re-flashing the stock ROM, you should be able to apply the OTA update.
Thanks a lot for the detailed answer. I really appreciate people like you. [emoji3]
Sent from my Redmi Note 3 using Tapatalk
I've had my 6P since Nov of 15, and I have always run it with a stock rom that is rooted. I've used Heisenberg's guide since day one, and never run into any considerable trouble.
Today though, after not updating the rom for a while, I am running into two issues. I went from angler nmf26f to the most current one, n2g47o.
Thing 1 - after I install twrp through fastboot, I can load into it and everything is fine. However, after I reboot, I can no longer load it again. When I go into the bootloader and select Recovery, after a few moments I get a screen saying 'No command'
I have reinstalled twrp a few times but it has done nothing to help.
Thing 2 - Root is no longer working. I have installed the newest SuperSU through twrp and while the app is present on the phone, it says root undetected.
Any of you folks run into anything similar? The phone/rom works fine otherwise. Thanks!
I had the same issue from 7.0 and forward. SUpersu causes a bootloop even on a fresh rom. You could give Magisk a try it worked for me at least.
DirtyHennessy said:
I had the same issue from 7.0 and forward. SUpersu causes a bootloop even on a fresh rom. You could give Magisk a try it worked for me at least.
Click to expand...
Click to collapse
Thanks! I will try that.
Seamus1 said:
I've had my 6P since Nov of 15, and I have always run it with a stock rom that is rooted. I've used Heisenberg's guide since day one, and never run into any considerable trouble.
Today though, after not updating the rom for a while, I am running into two issues. I went from angler nmf26f to the most current one, n2g47o.
Thing 1 - after I install twrp through fastboot, I can load into it and everything is fine. However, after I reboot, I can no longer load it again. When I go into the bootloader and select Recovery, after a few moments I get a screen saying 'No command'
I have reinstalled twrp a few times but it has done nothing to help.
Thing 2 - Root is no longer working. I have installed the newest SuperSU through twrp and while the app is present on the phone, it says root undetected.
Any of you folks run into anything similar? The phone/rom works fine otherwise. Thanks!
Click to expand...
Click to collapse
Have you made sure to update your radio, bootloader and vendor to the most recent version? Make sure to also try flashing twrp again but do everything through fastboot flash commands on your pc.
Seamus1 said:
I've had my 6P since Nov of 15, and I have always run it with a stock rom that is rooted. I've used Heisenberg's guide since day one, and never run into any considerable trouble.
Today though, after not updating the rom for a while, I am running into two issues. I went from angler nmf26f to the most current one, n2g47o.
Thing 1 - after I install twrp through fastboot, I can load into it and everything is fine. However, after I reboot, I can no longer load it again. When I go into the bootloader and select Recovery, after a few moments I get a screen saying 'No command'
I have reinstalled twrp a few times but it has done nothing to help.
Thing 2 - Root is no longer working. I have installed the newest SuperSU through twrp and while the app is present on the phone, it says root undetected.
Any of you folks run into anything similar? The phone/rom works fine otherwise. Thanks!
Click to expand...
Click to collapse
Flash root in TWRP before your first boot into the stock rom. On Nougat 7.0+, stock recovery replaces TWRP on boot if you do not. This solves both of your problems. When you clean flash and install a custom rom, with or without root, TWRP will remain. If you just use stock unrooted, then you should flash root before first boot each month when you update.
Sent from my Nexus 5X using Tapatalk
SuperSu 2.80 & 2.81 broke root for most phones - including mine. I had to flash 2.79 SR3 to get root again. Chainfire released 2.82 this morning but I haven't tried it yet.
https://forum.xda-developers.com/apps/supersu/stable-2016-09-01supersu-v2-78-release-t3452703
If you boot to twrp first time mount system and use the filemanager to delete recovery-from-boot.p under system. Use magisk instead of supersu for root.
Hi,
I've downgraded my phone ZE520KL couple months ago but I've forgotten that VOLTE is only available on 7.0...
I've recieved the OTA notification, downloaded the package on the phone, but when it reboots it is going on TWRP & then if I'm rebooting it doesn't continue the upgrade process.
What am I missing? (on my previous phones this wasn't so tricky...) Should I use the Install method directly from TWRP? If Yes on which zip? Is it possible to find the one that I've downloaded directly with my phone?
bibile said:
Hi,
I've downgraded my phone ZE520KL couple months ago but I've forgotten that VOLTE is only available on 7.0...
I've recieved the OTA notification, downloaded the package on the phone, but when it reboots it is going on TWRP & then if I'm rebooting it doesn't continue the upgrade process.
What am I missing? (on my previous phones this wasn't so tricky...) Should I use the Install method directly from TWRP? If Yes on which zip? Is it possible to find the one that I've downloaded directly with my phone?
Click to expand...
Click to collapse
Same like me before. Have you rooted your phone yet? if yes then try this, it work for me though (Backup your phone is recommended)
1. Download busybox, supersu and no-verity file
2. Using flashfire app, choose flash zip or ota option
3. Add ota 'WW-ZE520Kl-.....'
4. Add firmware 'UL-ASUS-....'
5. Remove tickmark from 'Inject supersu'
And flash, it will reboot but do not boot to system. You must boot to twrp, flash no-verity file, busybox and supersu or your phone will not boot. Then reboot, done.
If this method is helpful, do reply to me
Btw, sorry for my poor english.
[email protected]@ said:
Same like me before. Have you rooted your phone yet? if yes then try this, it work for me though (Backup your phone is recommended)
1. Download busybox, supersu and no-verity file
2. Using flashfire app, choose flash zip or ota option
3. Add ota 'WW-ZE520Kl-.....'
4. Add firmware 'UL-ASUS-....'
5. Remove tickmark from 'Inject supersu'
And flash, it will reboot but do not boot to system. You must boot to twrp, flash no-verity file, busybox and supersu or your phone will not boot. Then reboot, done.
If this method is helpful, do reply to me
Btw, sorry for my poor english.
Click to expand...
Click to collapse
Thanks, works wonderfully! Flashfire flashed the new OTAs successfully but the phone didn't then boot (or it bootlooped). A quick Google search led me to your response and the dm-verity file fixed the boot!
I also didn't flash Busybox in case you needed to know and before flashing the OTAs I checked the "Automount" and "Mount systeam as R/W" in Flashfire otherwise the app would just get stuck in a blank screen.
EDIT: WiFI isn't working, tried already deleting the files in /data/misc/wifi, /persist and /data/misc/dhcp as suggested in various threads but still nothing. Anyone know how to fix it before I attempt to do a full backup and wipe?
vEEGAZ said:
Thanks, works wonderfully! Flashfire flashed the new OTAs successfully but the phone didn't then boot (or it bootlooped). A quick Google search led me to your response and the dm-verity file fixed the boot!
I also didn't flash Busybox in case you needed to know and before flashing the OTAs I checked the "Automount" and "Mount systeam as R/W" in Flashfire otherwise the app would just get stuck in a blank screen.
EDIT: WiFI isn't working, tried already deleting the files in /data/misc/wifi, /persist and /data/misc/dhcp as suggested in various threads but still nothing. Anyone know how to fix it before I attempt to do a full backup and wipe?
Click to expand...
Click to collapse
Deleting files in /data/misc is not helped. Try this:
1. Check your selinux permissive or enforcing. If permissive, you should re-root your phone. Remember to flash busybox too or it will may some crash. Still not working follow step 2.
2. Re-flash the ROM using twrp. No data will be lost. Don't forget to re-root or it will not boot.
3. Try the lastest fw .68 or .75 though someone told that the .28 ota file had issue on wifi.
[email protected]@ said:
Deleting files in /data/misc is not helped. Try this:
1. Check your selinux permissive or enforcing. If permissive, you should re-root your phone. Remember to flash busybox too or it will may some crash. Still not working follow step 2.
2. Re-flash the ROM using twrp. No data will be lost. Don't forget to re-root or it will not boot.
3. Try the lastest fw .68 or .75 though someone told that the .28 ota file had issue on wifi.
Click to expand...
Click to collapse
Reflashing through TWRP worked Although I did it after backing up all the apps and did a factory reset which didn't even fix the wi-fi problem. But then Flashfire is useless if TWRP is capable of flashing OTAs right?
vEEGAZ said:
Reflashing through TWRP worked Although I did it after backing up all the apps and did a factory reset which didn't even fix the wi-fi problem. But then Flashfire is useless if TWRP is capable of flashing OTAs right?
Click to expand...
Click to collapse
Not really. Since OTA file can't flash through twrp. It really annoying for someone (like me ), so for the easiest way is just flash it using Flashfire, no need to use computer to flash stock recovery .
@vEEGAZ
yep, that's what I've been saying for months. I've never used anything but TWRP to flash my phone. I've downgraded, gone custom and back to stock many times.
@[email protected]@
I flash OTA's through TWRP every time there's an update.
wang1chung said:
@vEEGAZ
yep, that's what I've been saying for months. I've never used anything but TWRP to flash my phone. I've downgraded, gone custom and back to stock many times.
@[email protected]@
I flash OTA's through TWRP everything there's an update.
Click to expand...
Click to collapse
When my phone still in 6.0.1, flashed OTA's throgh twrp it said 'not correct phone...' but after upgraded 7.0 it succeeded although i don't need it anymore.
[email protected]@ said:
When my phone still in 6.0.1, flashed OTA's throgh twrp it said 'not correct phone...' but after upgraded 7.0 it succeeded although i don't need it anymore.
Click to expand...
Click to collapse
edit your updater-script and it'll flash no problem.
[email protected]@ said:
When my phone still in 6.0.1, flashed OTA's throgh twrp it said 'not correct phone...' but after upgraded 7.0 it succeeded although i don't need it anymore.
Click to expand...
Click to collapse
Yeah that's what I encountered aswell back 2-3 years ago, I remember I couldn't flash any OTAs via TWRP but apparently now you can. That's why I also used Flashfire in the first place but after running out of all options for the wi-fi problem I decided to give TWRP a try et voilà, it worked
wang1chung said:
edit your updater-script and it'll flash no problem.
Click to expand...
Click to collapse
I've tried that and still not working.
@[email protected]@
I JUST did it....on 1711.75 now. There was no recovery partition update either so I didn't have to reflash TWRP after :good:
I did have a bootloop issue after but fixed that by flashing the no-verity file. I'm not sure if that's related to having magisk installed though.
wang1chung said:
@[email protected]@
I JUST did it....on 1711.75 now. There was no recovery partition update either so I didn't have to reflash TWRP after :good:
I did have a bootloop issue after but fixed that by flashing the no-verity file. I'm not sure if that's related to having magisk installed though.
Click to expand...
Click to collapse
1. After reflashing rom through twrp, i lost my twrp. Oh, but when i use Flasfire, it isn't lost.
2. Not sure but after flashing ROM your boot will change to normal so it may not related to magisk or supersu. Maybe it beacause of the twrp, i've tried reflash stock recovery once and i can updated it without flash no-verity file though i've installed magisk.
[email protected]@ said:
1. After reflashing rom through twrp, i lost my twrp. Oh, but when i use Flasfire, it isn't lost.
2. Not sure but after flashing ROM your boot will change to normal so it may not related to magisk or supersu. Maybe it beacause of the twrp, i've tried reflash stock recovery once and i can updated it without flash no-verity file though i've installed magisk.
Click to expand...
Click to collapse
1. You will only lose TWRP if there is a recovery partition update in the stock firmware, yes, but that doesn't happen with every update. I think I read of a way to block it from updating the recovery partition but can't find the article right now. If flashfire works, use it, I just like TWRP for the other features like making and restoring nandroid backups.
2. I dirty flashed the update again through TWRP, verified the bootloop issue and then installed magisk (through TWRP) and it resolved the bootloop issue. No-verify file not required.
wang1chung said:
1. You will only lose TWRP if there is a recovery partition update in the stock firmware, yes, but that doesn't happen with every update. I think I read of a way to block it from updating the recovery partition but can't find the article right now. If flashfire works, use it, I just like TWRP for the other features like making and restoring nandroid backups.
2. I dirty flashed the update again through TWRP, verified the bootloop issue and then installed magisk (through TWRP) and it resolved the bootloop issue. No-verify file not required.
Click to expand...
Click to collapse
1.Ok, i got it.
2. The way using TWRP is keep the root ( root or not boot) and stock recovery is contrary ( can't root but will boot) or just flash custom kernel through twrp (not root required).
simple question :
- you are talking about OTA & Firmware...
I've downloaded again from asus website Version WW-V14.2020.1711.75 (I assume it is the latest firmware). Are you simply giving the example of an OTA that is released post the firmware version I have to install to have the 7.0 base?
Or is it anything that I'm missing...
From your explanations I should only :
- install flashfire
- flash the latest firmware
- boot into TWRP & flash no verity
- reboot the system
Right?
bibile said:
simple question :
- you are talking about OTA & Firmware...
I've downloaded again from asus website Version WW-V14.2020.1711.75 (I assume it is the latest firmware). Are you simply giving the example of an OTA that is released post the firmware version I have to install to have the 7.0 base?
Or is it anything that I'm missing...
From your explanations I should only :
- install flashfire
- flash the latest firmware
- boot into TWRP & flash no verity
- reboot the system
Right?
Click to expand...
Click to collapse
Yep, you can also flash the latest .zip via TWRP instead of using Flashfire, it's 100% working for me. Just REMEMBER to flash the no-verity file otherwise you'll end up in a bootloop.
I have newest oreo fw from asus website. Ive unlocked bootloader with official app. Now i want WTRP and root with magisk. I want to know how to flash updates to get all wroking?
1. Flash TWRP via fastboot?
2. Flash Magisk via TWRP?
3. When update will release i must flash whole fw from asus website with TWRP and then no-verity file to boot?
4. Or can i use flashfire app to flash fw from asus website and then no-verity zip?
What is the best solution to have updated system without use PC? Step by step guide will be great THX
Im confuse.
Im using 1711.75 with magisk 15.3 and twrp 3.2.1.0
I have the full firmware of initial oreo
I just have to install flashfire
Flash the full firmware oreo that i have then rboot to twrp to flash no verify zip?
ktl20 said:
I have newest oreo fw from asus website. Ive unlocked bootloader with official app. Now i want WTRP and root with magisk. I want to know how to flash updates to get all wroking?
1. Flash TWRP via fastboot?
2. Flash Magisk via TWRP?
3. When update will release i must flash whole fw from asus website with TWRP and then no-verity file to boot?
4. Or can i use flashfire app to flash fw from asus website and then no-verity zip?
What is the best solution to have updated system without use PC? Step by step guide will be great THX
Click to expand...
Click to collapse
iamROOTX said:
Im confuse.
Im using 1711.75 with magisk 15.3 and twrp 3.2.1.0
I have the full firmware of initial oreo
I just have to install flashfire
Flash the full firmware oreo that i have then rboot to twrp to flash no verify zip?
Click to expand...
Click to collapse
The safest and true way to flash any ota update without any issues by using stock recovery, don't use twrp or flashfire or any other apps.
follow the steps below:
1. When you are rooted and twrp installed, to getback to full stock boot and recovery without wiping data, flash the latest raw image available. For oreo the latest available one for ze520kl is WW_ZE520KL_15.0410.1712.31_M3.10.47.16_Phone-user.raw.zip.
2. Now flash the ota update available normally via stock recovery.
3. Flash oreo support twrp-3.2.1-0 and magisk zip.
4. Done.
I'm periodically upload the latest available ota update for ze520kl in the ze520kl ota update links thread.
Here is the latest one.
Didn't see anyone else confirming that the Magisk OTA install works with Android 10, so... confirming that it does.
Let OTA finish but don't reboot.
Go to Magisk Manager and "Install" Magisk - select the bottom option (includes the OTA phrase)
Reboot
Profit.
No problems noticed in a half-day of use.
Did you do this from Pie or from Android Q beta? Also, did you uninstall Magisk from the manager before you did the OTA?
Anybody know if this worked smoothly with their Viper4Android app?
This worked form me going from Android 9 with Magisk to Android 10
I'm glad I waited and saw this before moving to Android 10. This worked like a charm for me as well.
gregoryx said:
Didn't see anyone else confirming that the Magisk OTA install works with Android 10, so... confirming that it does.
Let OTA finish but don't reboot.
Go to Magisk Manager and "Install" Magisk - select the bottom option (includes the OTA phrase)
Reboot
Profit.
No problems noticed in a half-day of use.
Click to expand...
Click to collapse
Is this working on Novemeber 2019? i am rooted with magisk and twrp , but the OTA says error to download, try again. and never downloads and installed it.
---------- Post added at 09:16 PM ---------- Previous post was at 09:16 PM ----------
gregoryx said:
Didn't see anyone else confirming that the Magisk OTA install works with Android 10, so... confirming that it does.
Let OTA finish but don't reboot.
Go to Magisk Manager and "Install" Magisk - select the bottom option (includes the OTA phrase)
Reboot
Profit.
No problems noticed in a half-day of use.
Click to expand...
Click to collapse
Is this working on Novemeber 2019? i am rooted with magisk and twrp , but the OTA says error to download, try again. and never downloads and install it.
Ota usually gives me error cant install so i flash factory image without (-w) wiping then i reflash kernel and magisk, result is updating to latest image with everything stays at it is
kmry said:
Is this working on Novemeber 2019? i am rooted with magisk and twrp , but the OTA says error to download, try again. and never downloads and install it.
Click to expand...
Click to collapse
Is your recovery stock? It may not be clearly stated as I haven't read the thread in its entirety, but the OTA will fail with TWRP installed. It likely will also fail if the system partition is modified.
EDIT: I re-read your post. You clearly note using TWRP.
Nightf0x_007 said:
Ota usually gives me error cant install so i flash factory image without (-w) wiping then i reflash kernel and magisk, result is updating to latest image with everything stays at it is
Click to expand...
Click to collapse
How do you flash it, with flash fire, trough TWRP or from fastboot?
kmry said:
How do you flash it, with flash fire, trough TWRP or from fastboot?
Click to expand...
Click to collapse
Factory image flash via adb using pc, then i boot to twrp and reflash kernel and magisk
Anyone know how to get the native led configuration without using a custom rom or the lightflow app?
Should I update Magisk and manager before I do this?
My Magisk installed is 18.1 and it lists 20.1 as available
Magisk Manager installed is 7.0 and 7.4 is listed as available
If you wanna follow the official instructions :
https://topjohnwu.github.io/Magisk/tutorials.html#ota-installation
Nightf0x_007 said:
Factory image flash via adb using pc, then i boot to twrp and reflash kernel and magisk
Click to expand...
Click to collapse
i decided to flash the complete ota trough TWRP, installed normally but TWRP was gone, so installed again, then magisk then EX kernel, thanks.
kmry said:
i decided to flash the complete ota trough TWRP, installed normally but TWRP was gone, so installed again, then magisk then EX kernel, thanks.
Click to expand...
Click to collapse
Yes this also works, this was the procedure i was following before, but i dont have twrp installed in my device, it causes bootloop and device sensors errors idk why so i fastboot it, once i tried updating by flashing ota zip via twrp but device didnt bootup maybe cause twrp is not installed so since that what i do is reflashing factory image without -w
Nightf0x_007 said:
Yes this also works, this was the procedure i was following before, but i dont have twrp installed in my device, it causes bootloop and device sensors errors idk why so i fastboot it, once i tried updating by flashing ota zip via twrp but device didnt bootup maybe cause twrp is not installed so since that what i do is reflashing factory image without -w
Click to expand...
Click to collapse
do i have to delete the "-w" command only on the "flash-all.bat" or on the "flash-all.sc" too?
kmry said:
do i have to delete the "-w" command only on the "flash-all.bat" or on the "flash-all.sc" too?
Click to expand...
Click to collapse
Just the flash-all.bat if your using Windows. :good:
kmry said:
do i have to delete the "-w" command only on the "flash-all.bat" or on the "flash-all.sc" too?
Click to expand...
Click to collapse
.bat file only