I have m9plus it is the mt6795 , and I was dumb enough to Try to flash with sp flash....The phone does not vibrate, light up, power up, nothing. The only thing it does is led lights up when plugged in. Is not recognized by pc in linux, or windows. is there no way of TP? is it truly dead? thanks for answering.
BTW; It was bootloader unlocked and s-offed.
Thank you.
Have you tried holding using the combinations:
> Power + VOL UP
> Power + VOL DOWN
> Power
Usually, you only need to do it for around 5seconds, but I heard of many people holding for around 30-40 seconds and it finally boots.
---------- Post added at 06:45 PM ---------- Previous post was at 06:45 PM ----------
Have you tried holding using the combinations:
> Power + VOL UP
> Power + VOL DOWN
> Power
Usually, you only need to do it for around 5seconds, but I heard of many people holding for around 30-40 seconds and it finally boots.
I tried every button config I can think of, and nothing works. I believe I formatted the bootloader.
I see SP flash tool has the risk of bricking your device. What did you flash exactly?
Sent from my iPhone using Tapatalk
Found brom log
Not exactly sure. its been bricked for a few weeks now. I have been playing with my regular m9.
Seeing as Its pretty much bricked i dont knw what else to do. I thought of the uh oh program, but its not supported. anybody know how much HTC would charge to fix it?
Here is the brom log and such. It looks like I erased the preloader.
I had to delete some of the brom to fit the 512kb limit but I think the most important part is at the bottom
Have you tried pushing VOL+ VOL- and Power at once for a few seconds?
Yes.. I have tried every button config i can find and have held it for up to 2 minutes. Nada. Ziltch.
Related
HTC HD2
Android version: 4.0.3
Rom: Gingerbread / IcecreamTosti
Description:
My HD2 suddenly had startup problems. When I pressed the power (end call) button, I got:
"cedesmith's LK (CLK) v1.4.0.1
... ... ...
[240] -- suspend --"
Now the only way I can start my phone is by pressing the windows (middle) button and at the same time the power (end call) button.
I then first get the HTC logo (white background) and after that de cedesmith text, then I let go of the buttons.
Sometimes I get the recovery menu and sometimes the HTC logo (black background) and the HD2 boots and I get the lockscreen
Also, the return button (<--) doesn't work and I can't turn of my phone by holding the power on/off (end call) button. Only the short press works, holding it pressed longer doesn't function.
Is the cause for this known and is this software- or hardware related?
Please let me know what the solution to this problem is
Ramon
factory reset wipe in recovery If it does not work u need setup again android
rom
all rom here http://android.hd2roms.com/
Are you able to get to the tri colored screen? You do this by holding the volume down button as the phone is being powered on. If you can, I would suggest Task29 wiping it. You can do that with the Hd2 toolkit pretty easily.
I can use the windows key plus the power key to startup, however I cannot get in the boot menu (with this). Using the volume down key while the phone powers on doesn't do a thing.
So I can't get in boot menu, nor in tri color menu ... I was able to get in the boot menu however. Strange, but I can't anymore for some reason (tried it 10+ times)
http :// youtu . be/_5W6LLP4xdM
These types of issues often tend to be hardware keys related, i've seen a few threads where disconnecting the bottom keys suddenly allowed you to get into bootloader again. WHether its the keys themselves, teh ribbon, or teh mainboard, who knows.
Not the kind of answer you were hoping to hear, im sure, and i cant swear that would work, it may not even be teh problem in your case, so im not advising you to start dismantling it, just sharing a few points gleaned from reading.
See my previous post
Going to dismantle it now
EDIT:
Removed four screws, heated front display. Started phone and was able to access recovery console (That's right, I have no idea why). Did a factory restore and the return key works. So now the power on off button only turns of teh screen and is not able to power off.
If you can somehow get adb to work try re-flashing the boot image from your kernel
> adb reboot bootloader
> fastboot flash boot boot.img
> fastboot reboot
just my 2 cents worth...
shanman-2 said:
If you can somehow get adb to work try re-flashing the boot image from your kernel
> adb reboot bootloader
> fastboot flash boot boot.img
> fastboot reboot
just my 2 cents worth...
Click to expand...
Click to collapse
The problem is, I can't load the bootloader (three color screen).
So:
> adb reboot bootloader
Doesn't work. I get the white HTC screen and than cLK screen.
To rule out software issue try putting leoimg.nbh on the root of your sdcard and boot phone this will try to install clk 1.5 and cwm recovery if pressing the power key initiates the install ..
Details here....http://forum.xda-developers.com/showthread.php?t=1402975...
go to post 3 .. download is there too..
otherwise
could be a stuck key.....
---------- Post added at 11:21 PM ---------- Previous post was at 11:17 PM ----------
Ramusters said:
See my previous post
Going to dismantle it now
EDIT:
Removed four screws, heated front display. Started phone and was able to access recovery console (That's right, I have no idea why). Did a factory restore and the return key works. So now the power on off button only turns of teh screen and is not able to power off.
Click to expand...
Click to collapse
didn't see this...
Doing this
Pressing power key causes clk: suspend
LEOIMG.NBH is in root
"enter SPL by holding VOL DOWN key while powering/resting the phone.
Press power button to install the nbh and then take out the battery for a second and power the device up."
The volume down key thing doesnt work with the phone. The only thing that works is the windows key + on/off key
sorry might of misled you just boot phone wait for prompt, it should see the nbh file and ask do you want to install...
---------- Post added at 11:51 PM ---------- Previous post was at 11:43 PM ----------
ya my mistake, really looks like a hardware problem
shanman-2 said:
sorry might of misled you just boot phone wait for prompt, it should see the nbh file and ask do you want to install...
---------- Post added at 11:51 PM ---------- Previous post was at 11:43 PM ----------
ya my mistake, really looks like a hardware problem
Click to expand...
Click to collapse
The keys work, i've tested this in the recovery console. However in the operating system, they don't all work. Return doesn't (always) work.
How can i suddenly have boot problems along with key problems ?? Could it be a result of repeatedly dropping the phone ??
Ramusters said:
Could it be a result of repeatedly dropping the phone ??
Click to expand...
Click to collapse
lol.
..........
samsamuel said:
lol.
..........
Click to expand...
Click to collapse
Yeah well, I dropped it a couple of times but if the phone is being able to start, access the internet, the camera works etc etc., then I find it strange that dropping the phone causes (only) boot problems
Could be a hairline crack in the ribbon or the mainboard, could be a slightly unseated ribbon connector, could be a single solder that has come lose but is still half connecting, could be an issue with the power delivery where the switchover from initial boot power to controlled power management is causing problems.
samsamuel said:
Could be a hairline crack in the ribbon or the mainboard, could be a slightly unseated ribbon connector, could be a single solder that has come lose but is still half connecting, could be an issue with the power delivery where the switchover from initial boot power to controlled power management is causing problems.
Click to expand...
Click to collapse
Going to open up the entire phone tomorrow, to check everything (as far as possible)
EDIT: The key problem was most likely caused by a fracture in the ribbon. The ribbon broke when disassembled. Before I order a new ribbon, can someone tell me why then I get bootloader messages? Is this or could this be related to the ribbon problem? Because if it is not, there is no use in ordering a new ribbon
Lg G2 AT&T, The power button and volume down button does not work, when i try to get into download mode it goes to "[2130] Fastboot mode started" . I flashed the wrong rom for my device, usually i can go to recovery but for some reason this time it wont let me. At this point i'm pretty hopeless, I have looked on Google for solutions but you either need recovery or download mode. Please help
Have you tried entering recovery by turning off the phone...pressing power and vol. down...then, while still holding the vol. down, release and press again the power button once the LG logo appears...then release the vol. down button once it asks if u want to factory reset and pressed the power button three times to attempt to enter recovery?
---------- Post added at 06:43 PM ---------- Previous post was at 06:36 PM ----------
Read this entire post and follow VERY carefully if your symptoms sound the same (two different sets of symptoms with different solutions). I was able to bring my phone back without recovery, download mode, etc. However, I did not have the fastboot error. http://forum.xda-developers.com/showthread.php?t=2681089
uiuc08 said:
Have you tried entering recovery by turning off the phone...pressing power and vol. down...then, while still holding the vol. down, release and press again the power button once the LG logo appears...then release the vol. down button once it asks if u want to factory reset and pressed the power button three times to attempt to enter recovery?
---------- Post added at 06:43 PM ---------- Previous post was at 06:36 PM ----------
Read this entire post and follow VERY carefully if your symptoms sound the same (two different sets of symptoms with different solutions). I was able to bring my phone back without recovery, download mode, etc. However, I did not have the fastboot error. http://forum.xda-developers.com/showthread.php?t=2681089
Click to expand...
Click to collapse
I have tried the power button and volume down button. Ill read the thread and try that. I will let you know how it goes
Good luck!!!
uiuc08 said:
Good luck!!!
Click to expand...
Click to collapse
Alright so none of it was working. Linux would not read my phone. I traded in my phone and got a Nexus 6 instead. Thank you for your help!
Hi All, i transferred some files into my phone memory. Lollipop rom. I think now internal memory is full and it's not booting up.
Not even rebooting in recovery. is it some hardware issue or memory full so not booting up.
LED light does flashes sometimes when I hold power button. Guys any idea, please help out.
When I am putting phone for charging its led blinking continuously. Is it dead/brick.
Thanks in advance
Since you said its not even charging properly, I'll say it's not because of memory issues. Maybe something went wrong.
Anyway try getting into fastboot mode and then to recovery.
If recovery doesn't open then flash stock LP firmware through fastboot and then try booting.
-z3r0- said:
Since you said its not even charging properly, I'll say it's not because of memory issues. Maybe something went wrong.
Anyway try getting into fastboot mode and then to recovery.
If recovery doesn't open then flash stock LP firmware through fastboot and then try booting.
Click to expand...
Click to collapse
Yeah agree not a memory issue.
While charging its only LED blinking. No battery sign. Googled and found that may be putting on charging will help. Dont know if this method will work or not.
I am not even able to go recovery while pressing both volume and power button. Its dead only. No screen showing up. how to go into fastboot mode.
divijeet said:
Yeah agree not a memory issue.
While charging its only LED blinking. No battery sign. Googled and found that may be putting on charging will help. Dont know if this method will work or not.
I am not even able to go recovery while pressing both volume and power button. Its dead only. No screen showing up. how to go into fastboot mode.
Click to expand...
Click to collapse
Also the phone was 95% charged when this happened. If less than 10% battery I wouldn't have been worried.
Try this combination -
Press Power Button + Volume down (at the same time).
Keep them pressed for about 10 seconds.
Then first leave volume down and then Power button.
If something shows up then your phone can be fixed. It's the fastboot mode. Try this and post here I'll guide you further on.
If nothing shows up (no fastboot mode) then I guess you're hard bricked or at very least there's battery issue.
---------- Post added at 09:26 PM ---------- Previous post was at 09:21 PM ----------
Which ROM were you on?
-z3r0- said:
Try this combination -
Press Power Button + Volume down (at the same time).
Keep them pressed for about 10 seconds.
Then first leave volume down and then Power button.
If something shows up then your phone can be fixed. It's the fastboot mode. Try this and post here I'll guide you further on.
If nothing shows up (no fastboot mode) then I guess you're hard bricked or at very least there's battery issue.
---------- Post added at 09:26 PM ---------- Previous post was at 09:21 PM ----------
Which ROM were you on?
Click to expand...
Click to collapse
Its not going in fastboot mode. so yeah i found out its bricked. connecting USB cable it shows devices as QHSUSB_BULK.
It was resurrection remix Resurrection-Remix-LP-v5.5.9-20151120-condor.zip
Now searching for unbricking it I haven't found any solution or files for condor yet.
divijeet said:
Its not going in fastboot mode. so yeah i found out its bricked. connecting USB cable it shows devices as QHSUSB_BULK.
It was resurrection remix Resurrection-Remix-LP-v5.5.9-20151120-condor.zip
Now searching for unbricking it I haven't found any solution or files for condor yet.
Click to expand...
Click to collapse
The symptoms make it appear to be hard-bricked How come?
You were on a custom ROM, and transferred your files to the internal memory right?
After that, did the phone turn off with a warning or did you turn it off?
Rohitagni said:
The symptoms make it appear to be hard-bricked How come?
You were on a custom ROM, and transferred your files to the internal memory right?
After that, did the phone turn off with a warning or did you turn it off?
Click to expand...
Click to collapse
Yeah actually wanted to try CM13.1; Freed up some internal memory by uninstalling few apps. Puts ROMS and GAPPS in both internal and SD. I remember still it was few MBs free.
Powered it off and then wanted to take it in fastboot/reovery while pressing power-up and volume down. And since then its hard-bricked.
I think lost my precious device as no solution yet.
Found a solution but no files available for moto-e yet. If anyone have please let me know.
http://forum.xda-developers.com/moto-e/general/unbrick-hard-bricked-moto-e-t2974093
divijeet said:
Yeah actually wanted to try CM13.1; Freed up some internal memory by uninstalling few apps. Puts ROMS and GAPPS in both internal and SD. I remember still it was few MBs free.
Powered it off and then wanted to take it in fastboot/reovery while pressing power-up and volume down. And since then its hard-bricked.
I think lost my precious device as no solution yet.
Found a solution but no files available for moto-e yet. If anyone have please let me know.
http://forum.xda-developers.com/moto-e/general/unbrick-hard-bricked-moto-e-t2974093
Click to expand...
Click to collapse
I don't think it is hard bricked though...
Do one thing.... Use the method to get to fastboot by holding power and vol down.... but this time, press BOTH VOL DOWN AND UP.
Give this a try for a long time (10-15 secs).... and remove ONLY POWER AND VOL UP!
Rohitagni said:
I don't think it is hard bricked though...
Do one thing.... Use the method to get to fastboot by holding power and vol down.... but this time, press BOTH VOL DOWN AND UP.
Give this a try for a long time (10-15 secs).... and remove ONLY POWER AND VOL UP!
Click to expand...
Click to collapse
Tried it. But just LED flashing for few moments and no fastboot. Even I am not able to believe it's hardbrick
But when I put on charging LED blinks sometimes randomly, in some minutes gaps. No battery sign while charging.
And connecting USB cable it shows devices as QHSUSB_BULK. So all these symptoms are like its hard-bricked.
Thanks for your suggestion. Please let me know if anything else I need to try
divijeet said:
Tried it. But just LED flashing for few moments and no fastboot. Even I am not able to believe it's hardbrick
But when I put on charging LED blinks sometimes randomly, in some minutes gaps. No battery sign while charging.
And connecting USB cable it shows devices as QHSUSB_BULK. So all these symptoms are like its hard-bricked.
Thanks for your suggestion. Please let me know if anything else I need to try
Click to expand...
Click to collapse
Have u tried holding the power button only for a long time?
Do this .... Plug into the charger, and hold the power on for a long time.... check the proximity sensor.... it will glow for a short time (.5 secs only) so observe carefully.
Try this
Rohitagni said:
Have u tried holding the power button only for a long time?
Do this .... Plug into the charger, and hold the power on for a long time.... check the proximity sensor.... it will glow for a short time (.5 secs only) so observe carefully.
Try this
Click to expand...
Click to collapse
Yes tried this one also. No proximity sensor glow. Just LED glows.
Trying one method where moto-g hard bricked issue mentioned:
http://forum.xda-developers.com/moto-g/help/how-to-revive-hard-bricked-moto-g-t2833798
But then I am stuck at blank flash issue. Same like mentioned here
http://forum.gsmhosting.com/vbb/f783/help-moto-e-boot-repair-solution-2002535/
Need blank flash files for moto e xt 1022. if anyone have please do point me.
divijeet said:
Yes tried this one also. No proximity sensor glow. Just LED glows.
Trying one method where moto-g hard bricked issue mentioned:
http://forum.xda-developers.com/moto-g/help/how-to-revive-hard-bricked-moto-g-t2833798
But then I am stuck at blank flash issue. Same like mentioned here
http://forum.gsmhosting.com/vbb/f783/help-moto-e-boot-repair-solution-2002535/
Need blank flash files for moto e xt 1022. if anyone have please do point me.
Click to expand...
Click to collapse
I am extremely sorry for ur situation bro
Well only transferring files to internal storage may not have caused this issue. It must be something else.
Maybe emmc got corrupted. In that case it's hopeless now. Take it to a service centre and see what do they say.
I have a soft bricked Z1. Recovery doesn't work. System doesn't work. Now I cannot find any way to force it into fastboot mode to flash a new, working recovery. Any tips?
power off
than press and hold vol+ and vol-
connect y phone to pc .
Thanks and I tried that, but I can't power it off. It's stuck in a boot loop and when Iong-press the power button, it just restarts
Press and hold until it go black , after 1 reboot .
Gonzaman said:
Press and hold until it go black , after 1 reboot .
Click to expand...
Click to collapse
It just keeps going back into the boot loop . Doesn't remain turned off, but reboots instead.
Than connect cabel wile hold vol+ and vol- you will get in fastboot .
---------- Post added at 02:54 PM ---------- Previous post was at 02:53 PM ----------
Hold +- vibro connect .
Gonzaman said:
Than connect cabel wile hold vol+ and vol- you will get in fastboot .
---------- Post added at 02:54 PM ---------- Previous post was at 02:53 PM ----------
Hold +- vibro connect .
Click to expand...
Click to collapse
So I followed these steps:
1) Long-press the power button. Phone restarts.
2) While restart, hold +vol and -vol.
3) Immediately after restart, plugin USB cable to computer.
That didn't help. Did I miss anything?
No . than take off the cover and unplug buttery .
Gonzaman said:
No . than take off the cover and unplug buttery .
Click to expand...
Click to collapse
Not sure that's the way –*is there an easy way to remove the cover for the Z1?
Ok, I found a solution and am incredibly grateful to everyone who helped. See http://forum.cyanogenmod.org/topic/...zuk-is-bricked-without-salvation/page__st__20
Can you tell me the solution?
buhshubuh said:
Ok, I found a solution and am incredibly grateful to everyone who helped. See http://forum.cyanogenmod.org/topic/...zuk-is-bricked-without-salvation/page__st__20
Click to expand...
Click to collapse
'
What is the solution?
buhshubuh said:
Ok, I found a solution and am incredibly grateful to everyone who helped. See http://forum.cyanogenmod.org/topic/...zuk-is-bricked-without-salvation/page__st__20
Click to expand...
Click to collapse
this link is not opening
Okay guys so I had the exact same problem just hours ago.
I accidentally flashed a kernel in recovery partition (Ik lol xD)
So here's what i did.
I searched around a lot and didn't find an exact answer. Then i came across something.
If you can, remove the back cover and disconnect the battery and then connect it again.(Look it up on Youtube)
If you can't do so, wait for the battery to fully discharge.
Then, press the vol+ and vol- together and wait for 2-3 secs and then connect your USB cable.
Don't press the power button or you'll just end up in a bootloop.
My phone directly went into fastboot mode.
Hope I Helped.
hold voulme + button and power button , and then continuously press volume - button 10-15 times! it will boot twrp ! i was facing the same issue ! This worked for me!
buhshubuh said:
I have a soft bricked Z1. Recovery doesn't work. System doesn't work. Now I cannot find any way to force it into fastboot mode to flash a new, working recovery. Any tips?
Click to expand...
Click to collapse
Let your phone to discharge to 0% then it would automatically power off. Then press and hold volume up button and connect to pc. And you r there in fastboot.
hi guys i'm using Huawei P9 Lite VNS-L53
i rooted my phone two days ago and everything was ok, then i left my phone charging and in the morning my phone was turned off and when i tried turning it back on, it got stuck on the huawei logo and i cant get past it.
i had bootloader open, twrp and root
phone doesn't react to my key combinations (power, power+volume up, power+volume up+down vs.. you got it.).
then i cant connect my phone to my pc, it doesnt make any sound when i connect it and my computer doesn't say anything about about my phone being connected.
All my impressions are that's it. how can i fix it? or is it a hard brick or something unrepairable?
sheppir said:
hi guys i'm using Huawei P9 Lite VNS-L53
i rooted my phone two days ago and everything was ok, then i left my phone charging and in the morning my phone was turned off and when i tried turning it back on, it got stuck on the huawei logo and i cant get past it.
i had bootloader open, twrp and root
phone doesn't react to my key combinations (power, power+volume up, power+volume up+down vs.. you got it.).
then i cant connect my phone to my pc, it doesnt make any sound when i connect it and my computer doesn't say anything about about my phone being connected.
All my impressions are that's it. how can i fix it? or is it a hard brick or something unrepairable?
Click to expand...
Click to collapse
Can you get into fastboot?
You have to boot it into fastboot. You can't turn off it now, but you can reboot it. Connect to your pc,press the power button for 10 seconds, it will hard reboot, but when it turn off press the vol - pressing power. You will enter to fastboot.
Now unlock again the bootloader
---------- Post added at 12:48 PM ---------- Previous post was at 12:47 PM ----------
If all success, you can flash the twrp and flash the ROM
Ok, so i have to connect my phone turned off to the pc and then press the power button for 10 seconds? Then the volume down button?
Jinclaudio said:
You have to boot it into fastboot. You can't turn off it now, but you can reboot it. Connect to your pc,press the power button for 10 seconds, it will hard reboot, but when it turn off press the vol - pressing power. You will enter to fastboot.
Now unlock again the bootloader
---------- Post added at 12:48 PM ---------- Previous post was at 12:47 PM ----------
If all success, you can flash the twrp and flash the ROM
Click to expand...
Click to collapse
How do i know if I entered fastboot mode?.
because a tried what you said but it only turns off.
sheppir said:
How do i know if I entered fastboot mode?.
because a tried what you said but it only turns off.
Click to expand...
Click to collapse
You can know because there is a write and a robot icon.
So, try press power + vol - together for 10 seconds.