We are working with USB over Ethernet device. When we plug it into the phone, Android tries to use DHCP to get an IP address. We want to turn this off for our device.
Anyone know how to do this?
Thanks,
y-
latitudes
haven't used android in few years.... but ...what comes to mind.
1. simplest is 'within android of course, the 'network settings. within the settings, 'hopefully would be a 'manual field 'ip address editable. (sometimes ' non editable,' dhcp, with a 'check box,' which then makes the field editable)
or additionally, a '2nd available below for static manual inputs.
2. since your 'attempting Ethernet, ' seems you may be on a 'router,' if that's the case, you could initiate within the 'router's settings, 'go to the 'port forwarding fields,' manually assign the physical port, for use, and assign it to port forward to the 'static address,' (much of such settings have become standard editable on equipment within the last10 or so years.
hope success to you.
Thanks for the reply.
Related
When I plug my JasJar into my PC, I get a message "Pocket PC Networking: Unable to obtain a server-assigned IP address. Try again later or enter an IP address in network settings"
Please could someone with a JasJar go to Settings>ConnectionsNetwork Cards and tell me if every adaptor is set to "Use server assigned IP address" EXCEPT "Remote-NDIS Host" which is set to server assigned, but has an IP address in the lower box.
If yours is any different, please tell me what's different so I can fix mine up.
Everything set to be Obtain Automatically only... I changed only DNS entry for WLan NE2000 card.. rest all left as automatically updatin...
thanks dude!
can sum1 please post step by step instructions on how to connect to another computer on a home wireless network, network is 100% would love to get this working!
thanks
Make sure both wifi adapters are ON (both PC and PDA)
1. On your PDA, go to Start->settings->Connections->Network cards
You should find two tabs "Wireless" & "Network Adapters"
2. Click on Add New (in the wireless tab)
3. Give a convinient name, and select "This is a device-to-device (ad-hoc) connection"
4. Complete it by hitting OK
5. Go to "Network Adapters" tab, and choose "tiacxwln Compatible Wireless Ethernet..." adapter
6. Provide a specific IP address (eg. 192.168.1.2) & subnet mask (eg. 255.255.255.0)
7. Press OK to complete it!
8. Now, on your desktop, double click on your wireless connection tray icon, and then click on "Properties" button
9. Double click on "Internet Protocol (TCP/IP)" in the list to get the tcpip properties
10. Select "Use following IP address, and specify an IP (eg. 192.168.1.1) & subnet (eg. 255.255.255.0)
11. Press Ok, and close all dialogs
12. Now, right click on your wireless tray icon and select "View available wireless networks"
13. If you've got all the above steps right, you should find the Adhoc network you created on your PDA (...you should find the name you provided in step 3!)
14. Connect to it, and you have your wifi adhoc connection established!
Now you can do the following -
1. You can browse the contents of your desktop through Resco by setting up a simple Network drive (as long as you have a username and password for a user account on your desktop, it should be pretty straight forward to do it in resco!)
2. You can use Terminal services client
a. Fire up TSC, and type in your computer's name and press connect
(you can find out by right clicking on your "My Computer" icon and then clicking on properties) Eg. "Laptop" (without the quotes)
b. press connect, and you should see a login screen!
c. Enter your username and password that u use on ur desktop, and you should get things rolling Wink
Cheers!
San
ok, don't want to use adhoc, have a netgear dg834g, are the instructions the same for the adhoc, as in the ip setup?
One point to note, at least on my setup...
If I try TSC and enter my servers name it attempts to connect via GPRS,3G. If however I enter the IP address it connects with Wifi perfectly.
Not sure why but I can live with it...
Regards
gooroo said:
One point to note, at least on my setup...
If I try TSC and enter my servers name it attempts to connect via GPRS,3G. If however I enter the IP address it connects with Wifi perfectly.
Not sure why but I can live with it...
Regards
Click to expand...
Click to collapse
My bet would be that your wifi might not be giving you DNS services and your GRPS is.
You would think so, but my laptop and all the other PC's in the house happily connect using TSC to my server using its NAME instead of it's IP. I just thought it was some thing to do with the Universal.
Anyone knows how is possible to set a different port of 3389 default?
I try to write 192.168.1.X:XXXXX but it's impossible..it says The server name is invalid.
Thankx
No one?
Klaus said:
No one?
Click to expand...
Click to collapse
No way to redirect on the client side but you could redirect on the server side with a port forwarding type app. Kind of defeats the purpose of obscuring port 3389 though.
the problem with wifi gprs umts vpn and tsc all relate to the same issues, namely "." in the addresses.
the full stop and name issues usually relate in some way to the "my work" and "internet" designations of your connection types.
to cut a long story short, if you are having difficulty using IP addresses (I have never got a name to work), then place the IP address you are trying to use in the exceptions section of your connection type.
this way, the OS allows the "." in the addressing.
I think the "." issue is not allowed when you are the "my work" connection type, as this is designed or expects to a name for the connection. this is so even if you are using myserver.mydomain.com as the addressing.
if it detects the fullstop, it assumes you want to use the "internet" connection, disconnects what you are looking for and starts using the "internet" designated connection, and if it cant find one uses the 3g/gprs and auto launches.
what a wonderful system, and I dont really fully understand the need for "my work" versus "internet" but it is at operating system level from microsoft, and occurs on all the WM2005 devices as far as I can establish.
if you search on "my work" vpn gprs or similar through the forums, you will find a detailed outline and explanations.
i encountered the problems when trying to use TSC over a VPN over either WIFI or 3G, it simply kept cutting out after 2 seconds, or couldnt find it.
IP addresses are far better, far faster if you can use them and know them, add these into your exceptions as you will find that they rarely change and it should all start coming together.
hasnt been mentioned and dont know if it is different for the m5000 on WM5 (iam using an m1000 with SDIO WIFI)
If i have the PDA Connected on the Wireless network to enable me to connect through TSC i always have to ensure that my work network is selected for both of the two options in Network Management, (start/settings/connections/connections/advanced/select networks)
The top one 'programs that connect to the internet should connect using' is the key one for me, i have an orange gprs connection i need to ensure this has orange gprs or it will not connect, and vise versa if connecting through wireless it has to be My Work Network
I posted this question in the Networking Forum but got no replies. But here is my problem:
I messed around with the Network adapters settings, while trying to get WiFi to work properly.
Now everytime I connect to ActiveSync via USB, I get the error message, "Unable to obtain Server Assigned IP address". I am sure this is because I set one of the adapters to "Automatic IP", but I don't know which one. Moreso, my Wizard does not access the internet properly when connected via USB.
Could someone please tell me which adapter I wronged, and what setting its supposed to be?
i get this error message randomly. jus wen i wake it up the pop up will be there, i thaught it was jus a gprs error or something.
Same here :?
i´ve been getting the same message each time i plug my phone in to sync with my pc.
But now i put a IP adress in with my Wireless networkcard settings on the phone and the last time i synced the message didn´t show up anymore. Try that maybe it´ll help you too.
edit:
ok sorry, it didn´t work. Just got the same message when i synced the phone on my home pc.
Solution
Hi, make this:
Start > settings > connections > Network cards > Remote-NDIS Host > Click Use specific IP address
Enter 169.254.2.1 for IP address
Enter 255.255.0.0 for subnet
Enter 169.254.2.2
It functions on my Wizard...
Solution
Hi, make this:
Start > settings > connections > Network cards > Remote-NDIS Host > Click Use specific IP address
Enter 169.254.2.1 for IP address
Enter 255.255.0.0 for subnet
Enter 169.254.2.2
It functions on my Wizard...
My Wizard loves to give me this error message at random too. I'm curious as to exactly where it's trying to get a server assigned IP address from, and why.
Re: Solution
viking111 said:
Hi, make this:
Start > settings > connections > Network cards > Remote-NDIS Host > Click Use specific IP address
Enter 169.254.2.1 for IP address
Enter 255.255.0.0 for subnet
Enter 169.254.2.2
It functions on my Wizard...
Click to expand...
Click to collapse
Thanx Viking. Someone had replied my post in the Networking Forum with the same IPs as yours.
Thanx again
i would check you firewall aswell, cus that would block it out if it is not setup right. My does this everytime i get a update for the firewall!!!
2Hiazle...
Enjoy I had the same problem and found this solution in another discussion...
I found that this problem appears when you make ANY configuration changes in "Network Card"((
Hi, all,
I'm having the same problem with a Universal. Would this "fix" work also on my ppc?
Thanks
vmiguel
2vmiguel
Yes, it should... It's a WM problem, not a problem of concrete machine.
tried this fix but it still does it.
Anyone got any other suggestions?
I did the same as you, messing around with settings.....
Anyway I think this is the procedure I did to screw it up.
Click Start, Settings, Connections, Network Cards, Network Adapters.
Then select Remote-NDIS host. The radio button to 'Use specific IP address' is selected but no IP address is entered. You can't exit this screen without either adding an IP address or selecting the 'Use server-assigned IP address' radio button'. If you select 'Use server-assigned IP address' the problem appears thereafter.
To fix it (or at least restore the defaults) you need to edit the registry:
HKLM\Comm\RNDISFN1\Parms\TcpIp\
Change the value of 'EnableDHCP' from 1 to 0.
That fixed it for me.
HTH
Andy
Can someone please post a step by step procedure for putting a static IP into
my Tab 500?
instructions for static IP relevant on my tab version, android 3.1 (4.010.11_COM_GEN2):
open up wifi networks and settings. Find your network you wish to connect to and long hold it. Select Modify Network. Select IP Settings drop down and change from DHCP to Static. Scroll down again and type in your own IP addressing schema for the IP address and Gateway. Don't forget to add a network prefix length, even if you simply type in the suggested 24. I recommend using your ISP's DNS servers unless you are trying to use DNS for filtering and protection (such as opendns).
bmathison said:
instructions for static IP relevant on my tab version, android 3.1 (4.010.11_COM_GEN2):
open up wifi networks and settings. Find your network you wish to connect to and long hold it. Select Modify Network. Select IP Settings drop down and change from DHCP to Static. Scroll down again and type in your own IP addressing schema for the IP address and Gateway. Don't forget to add a network prefix length, even if you simply type in the suggested 24. I recommend using your ISP's DNS servers unless you are trying to use DNS for filtering and protection (such as opendns).
Click to expand...
Click to collapse
Thanks for prompt reply. What does 'long hold" mean? My Tab does not ever get
an IP assigned to it by DHCP, so I want to try a static IP to get wi fi working.
I will try your procedure when I get home from work today and will post results.
You're welcome. By long hold, i simply mean to tap the setting and hold it for a moment rather than let go right away. I am sure there is an official term for that, it just escapes me at the moment.
bmathison said:
You're welcome. By long hold, i simply mean to tap the setting and hold it for a moment rather than let go right away. I am sure there is an official term for that, it just escapes me at the moment.
Click to expand...
Click to collapse
Thanks again. I'll try a Factory Reset first. Then, if that doesn't work, I will try a static IP address.
Problem solved. Static IP not required.
I tried the Factory Reset from the settings menu. It took a few minutes to reset and reboot. A s soon as I went to the Wi-Fi settings, it found my router, got great signal strength, and was asked for my password. It then connected immediately.
I then went to settings, and looked for any updates. It found the latest update, so I downloaded and installed OS v3.1. It took about 1 hour to complete the download and installation. My tab works great now. I could not be more pleased with it.
Many thanks to all on this forum and elsewhere who contributed their suggestions and advice.
Been using this for a while with older fires but just got a 10 HD with 5.3.1. Was poking around here seeing if a rooting method already exists and noticed a lot of people stuck on 5.3.1, another update looming and everyone saying you can't block updates without root, but there's actually a fairly easy way.
Head on over to OpenDNS.com
Sign up for a Home Free account (completely free)
Login and go to the dashboard and click the "Settings" tab
There will be an area to "add a network" or something similar
Type your WAN IP address here ( whatsmyip.com can help you find that)
Click "Add this network" or whatever it says on the button
Your address will be added to the network list
Click on the drop down menu next to "Settings for:" and select the network you just added
Using the “Manage individual domains” area at the bottom of the page, add the following four domains set to “Always block”:
amzdigital-a.akamaihd.net
amzdigitaldownloads.edgesuite.net
softwareupdates.amazon.com
updates.amazon.com
Now, to use this service, you have to change the DNS settings in your router at home. This step will vary from brand to brand so Google it.
The two DNS IP addresses you need should be listed at the bottom of your OpenDNS dashboard page. Currently, they are 208.67.222.222 and 208.67.220.220
But they might have changed by the time you follow this. Simply add those DNS server IP addresses to your router, apply the changes and then check for a system update on your fire. It should say "Update check failed. " Voila!
.!!!!THINGS TO REMEMBER!!!!.
When using OpenDNS, you need to ensure you update the service if your home IP changes. They have utilities you can install on your PC to do this automatically. If your home IP changes and you don’t update OpenDNS, your Fire will be able to access updates.
If you take your Fire with you somewhere and connect to another network, your file will have access to updates.
There may be an app that lets you set DNS servers on the Fire itself or block domains, but since mine stays home, I've never looked into it.
Remember, not updating is half the battle.!
Thanks for sharing. Looks like you covered most of the caveats.
In the past Amazon has (on occasion) changed update server URLs. IP rotation is common and expected; no one should be using explicit addresses anyhow. I have not followed whether Amazon has stabilized source URLs responsible for OTA updates. Just noting some past behaviors that yielded nasty surprises.