i have p8 ale-l21 hang logo no recovery bootloader lock only go fastboot
cant flash with dload file any help plz
Use THIS instruction to extract the needed files from the UPDATE.APP file, and follow THIS instruction to flash them via fastboot.
Use your already downloaded UPDATE.APP file, and it should work fine, after flashing at least the BOOT, RECOVERY and SYSTEM partitions. If the UPDATE.APP has a CUST image, flash that too.
thx about quick reply
but how to flash recovery and boot with bootloader locked
sending 'boot' (22796 KB)...
FAILED (unknown status code)
finished. total time: 0.651s
mandolen said:
thx about quick reply
but how to flash recovery and boot with bootloader locked
sending 'boot' (22796 KB)...
FAILED (unknown status code)
finished. total time: 0.651s
Click to expand...
Click to collapse
Keep the phone in fastboot/bootloader mode and Try this command adb fastboot oem unlock.
Sent from my SM-J500F using XDA-Developers mobile app
im not have code unlock bootloader and product id and imie
Do you have the packaging of the phone? The box should have a label on the bottom, with your S/N and your IMEI.
If you send those two numbers to me in Private Message, I'll give you your bootloader unlock code in the reply.
If the S/N number is not present on the box itself, it still can be obtained. Connect the phone to your PC via fastboot, and type fastboot devices.
There should be only 1 list item, which is your phone, identified by it's S/N number.
The IMEI is often written on the invoice as well.
If you don't have these numbers, the only way you can get your phone back to life, is via repair.
If the phone got bricked while you was updating, the warranty should cover that. In this case, just return it, and you'll get a new one.
But if your phone was rooted without unlocking the bootloader, your warranty is void.
Note: please don't use colored, or formatted fonts if not necessary to do so. Thanks.
Note2: There should be a way to obtain all these information, even more, with fastboot, using the fastboot getvar all command, but seems like Huawei disabled this, for unkown reasons...
this my imie and s/n plz any one give me code unlock bootloader
imie1--869510020795934
imie2--869510020822670
s/n--W3D7N15B20006862
Is there somehow I can RE-lock the bootloader, UN-root my mate 8 - L09 and reset everything like it was when it was new?
edit:
This is what I have done until now.
- flashed to stock recovery (phone is not rooted any more)
- factory reset
Then when I try to relock the the bootloader , I get message FAILED (remote: root type is risk)
fastboot oem relock ****************
...
FAILED (remote: root type is risk)
finished. total time: 0.970s
Someone know how to resolve this issue?
Could this be fixed by installing fresh and untouched complete firmware from huawei?
If yes, some know which link to use for my device and version?
Model number: HUAWEI NXT-L09
Buld number: NXT-L09C432B152
All help is highly apprechiated.
Can someone please delete this thread - I created a new thread in the troubleshooting section.
http://forum.xda-developers.com/mate-8/help/problem-lock-bootloader-remote-root-t3363216
I have tried downgraded my phone from nougat, but has ended in at bootloop only showing the red Huawei Logo.
Now i can´t enter recovery, can´t update using 3 button method only thing i can access is fastboot.
My problem is my bootloader is locked and therefore i can´t flash an recovery. And now i cannot figure out how to obtain my product key, so i can unlock the bootloader.
Any1 who can help me with this would be much appreciate.
What did you do exactly to end with endless bootloop?
I used the rollback file from this Thread:
https://forum.xda-developers.com/hu...torial-rollback-n-to-mm-c432-devices-t3563955
Update went fine but afterwards it ended in a bootloop. The only thing i can access is fastboot.
The weird thing is that in fastboot it says my bootlader is unlocked with red, but i cant install an recovery. Its says acess denied and ask if i'm sure my bootloader is unlocked.
And thats why im back to trying to unlock the bootloader but i cant get the product id for my phone when i can't turn in on.. seems hopeless
I suppose that you did 3 button update metod. You have to factory reset phone. Press volume up and power button together and keep pressed until you see erecovery option for factory reset phone. Do it.
KAngelo said:
I have tried downgraded my phone from nougat, but has ended in at bootloop only showing the red Huawei Logo.
Now i can´t enter recovery, can´t update using 3 button method only thing i can access is fastboot.
My problem is my bootloader is locked and therefore i can´t flash an recovery. And now i cannot figure out how to obtain my product key, so i can unlock the bootloader.
Any1 who can help me with this would be much appreciate.
Click to expand...
Click to collapse
Post here IMEI+SN and i can try to get you bootloader unlock code.
gtdaniel said:
Post here IMEI+SN and i can try to get you bootloader unlock code.
Click to expand...
Click to collapse
Imei1: 863066034949799
Imei2: 863066034975810
Can't remember which is the right one
Sn: FUH7N16A08001972
Thank you so much for the help
maka1105 said:
I suppose that you did 3 button update metod. You have to factory reset phone. Press volume up and power button together and keep pressed until you see erecovery option for factory reset phone. Do it.
Click to expand...
Click to collapse
I cant. Have tried all the button combinations to enter both recovery and update mode but nothing works, only vibrates and showing huawei logo. Only thing i can access is fastboot through computer
With huawei extractor extract (from B160 or what ever firmware is your phone) system, boot, and recovery img and flash with adb. Than you have to do reset.
maka1105 said:
With huawei extractor extract (from B160 or what ever firmware is your phone) system, boot, and recovery img and flash with adb. Than you have to do reset.
Click to expand...
Click to collapse
Thanks for the suggestion.
When i try flashing it with adb it starts writing but then says "Failed (remote: Command not allowed)
Should have installed the proper drivers but still not working.
Same thing if try flashing with the L31 toolkit. Here it says "Something went wrong! - Maybe your boot-loader is locked?"
The only thing i can think of, is trying to unlock my bootloader again and see if its work. Even though it says unlocked in fastboot mode. But for that i still need the product id for my phone which i can´t get???
KAngelo said:
Imei1: 863066034949799
Imei2: 863066034975810
Can't remember which is the right one
Sn: FUH7N16A08001972
Thank you so much for the help
Click to expand...
Click to collapse
Your bootloader unlock code is: 1216684107248235
PS: until you unlock bootloader you can not flash anything...
Need Correct Firmware
i downgraded set 7.0 to 6.0 than this problem came
huawei
VNS-L31
imei
869315022035713
866655025440904
i have set not going in fastboot for install TWRP etc
set only going in upgrade mode when i Power UP but i tried but cant install UPDATE.APP via SD card because it always stop at 5% installing update
maplegsm said:
i downgraded set 7.0 to 6.0 than this problem came
huawei
VNS-L31
imei
869315022035713
866655025440904
i have set not going in fastboot for install TWRP etc
set only going in upgrade mode when i Power UP but i tried but cant install UPDATE.APP via SD card because it always stop at 5% installing update
Click to expand...
Click to collapse
You need corect oeminfo...
i restore set in fastboot mode but i cant install twrp or any other recovery
i also need bootloader unlock code
C:\>fastboot devices
3DN7N16427001072 fastboot
C:\>fastboot flash recovery twrp.img
target reported max download size of 471859200 bytes
sending 'recovery' (27434 KB)...
OKAY [ 0.938s]
writing 'recovery'...
FAILED (remote: Command not allowed)
finished. total time: 0.944s
C:\>
C:\>fastboot oem get-bootinfo
...
(bootloader) unlocked
OKAY [ 0.006s]
finished. total time: 0.006s
C:\>
dc unlocker info
Found Phone : HUAWEI VNS-L31
Model : Huawei phone in fastboot mode
IMEI : 869315022035713
Serial NR. : 3DN7N16427001072
Firmware : NRD90M test-keys
IMEI:866655025440904
FB LockState: LOCKED
USER LockState: LOCKED
unlocked
Battery state: 0
delete
gtdaniel said:
Your bootloader unlock code is: 1216684107248235
PS: until you unlock bootloader you can not flash anything...
Click to expand...
Click to collapse
Thanks man! my bootloader is now unlocked
But now i ran in to the next problem. Im able to flash now in adb but i cant seem to enter recovery? I tried flashing many different recoveries and the button combinations to enter them but i cant?
Any idea what to do
I Have the same problem. I cannot flash any recovery and files .img How to fix that?
I can boot to fastboot.
bootloop also, can do nothing
gtdaniel said:
Your bootloader unlock code is: 1216684107248235
PS: until you unlock bootloader you can not flash anything...
Click to expand...
Click to collapse
hello sir, could i also get the unlock bootloader code. RIGHT know, my phone in bootloop state. I have my bootloader lock, I can't enter fastboot. Nothing can do. here is my imei and sn:
imei: 860514035314136
sn : FKC4C16916001923
denduro said:
hello sir, could i also get the unlock bootloader code. RIGHT know, my phone in bootloop state. I have my bootloader lock, I can't enter fastboot. Nothing can do. here is my imei and sn:
imei: 860514035314136
sn : FKC4C16916001923
Click to expand...
Click to collapse
unlock bootloader code is not eligible for that IMEI (14 days limit...)
anyway, if you can not enter in fastboot mode, you can do anything...
go to service center or try DC Phoenix via a small fee (10-20 euros)...
i can enter fastboot, what next?
gtdaniel said:
unlock bootloader code is not eligible for that IMEI (14 days limit...)
anyway, if you can not enter in fastboot mode, you can do anything...
go to service center or try DC Phoenix via a small fee (10-20 euros)...
Click to expand...
Click to collapse
I have entered fastboot. It said phone unlocked, FRP unlock. Then, what else I have to do?
denduro said:
I have entered fastboot. It said phone unlocked, FRP unlock. Then, what else I have to do?
Click to expand...
Click to collapse
go to service center or try DC Phoenix...
for unlock code you have to login your Huawei ID atleast 14 days...
i suppose you can't do that...
Hello, and I have mist built yesterday with my Huawei P8 Lite ALE-21 dual Sim.
I wanted to play this Rome yesterday
https://forum.xda-developers.com/showpost.php?p=73230358&postcount=2 b895_update.zip
This did not work and made a mistake.
After that, I re-imported the original ROM without any problems.
After all it was again, I booted into the bootloader / fastboot synonymous but works
as soon as I now the recovery (fastboot flash recovery recovery.img)
I always get the following message.
target reported max download size of 471859200 bytes
sending ´recovery´ (25152kb)...
OKAY [ 0,797s]
writing ´recovery´...
FAILED (remote: Command not allowed)
finished. total time: 0.797s
The bootloader / fastboot is unlocked.
Did I shoot this now?
What could I do about it because the Huawei site where you get
the bootloader unlock code did not work anymore in Germany!!
Would appreciate a response or help very much.
Sorry for the bad english, i have translated with google
EDIT: it work again!
same issue
Hi I have the exact same issue with my Huawei p8 lite I can only go into fast boot mode but it says Phone locked and all my commands give me the exact same error Failed (remote:command not allowed ) and advice for me ? Thank you
Unlock the bootloader again (fastboot oem unlock <code>) and try again
Hello xda,
my cousin owns the P8Lite (PRA-LX1) and gave it to me to attempt unbricking it.
The device is stuck in a permanent bootloop, showing the Huawei logo. When pressing the power button for ~10s, it simply turns itself on again (even when not connected to a PC or the wall socket), which to me is very strange behaviour but I do not own a Huawei device.
I can get to fastboot (https://ibb.co/ixPtAn).
ADB does not recognize the device.
Fastboot does not let me boot a temporary recovery (be it the stock one or twrp), neither does it allow me to flash any file.
I have tried downloading the update.app file onto the root directory of the sd card and force the phone into the update mode (power, vol+, vol- at the same time) but to no avail.
Since it is not my own device and I cannot boot into Android at all, I have no way of getting to the IMEI of the device, which I would need to unlock the bootloader.
Is this device permanently bricked and a lost cause or is there still hope?
dejavecue said:
I have no way of getting to the IMEI of the device, which I would need to unlock the bootloader.
Click to expand...
Click to collapse
Hi,
IMEI should be engraved on the lower SIM tray if it's the original one.
HTH
badhabitsdiehard said:
Hi,
IMEI should be engraved on the lower SIM tray if it's the original one.
HTH
Click to expand...
Click to collapse
Oh yes I got the original one. But since I cannot boot, I cannot get the S/N that is apparently required as well.
Edit: Got the SN through fastboot devices.
Now the phone won't accept the unlock code that I got from huawei's website. It still says
PS C:\Users\*\Downloads\unlock bootloader> fastboot oem unlock ************
...
FAILED (remote: Command not allowed)
finished. total time: 0.017s
PS C:\Users\*\Downloads\unlock bootloader>
Click to expand...
Click to collapse
dejavecue said:
Got the SN through fastboot devices.
Now the phone won't accept the unlock code that I got from huawei's website.
Click to expand...
Click to collapse
Hi, sorry for the delay.
Try this, if not already tried: fastboot oem emmc_diag
It should check the status of emmc and tell you if it's ok.
Does this command: fastboot oem lock-state info work on your phone?
And putting the code Huawei sent you in this one fastboot oem frp-unlock?
Thank you for your comment:
badhabitsdiehard said:
Try this, if not already tried: fastboot oem emmc_diag
It should check the status of emmc and tell you if it's ok.
Click to expand...
Click to collapse
Code:
$ fastboot oem lock-state info
...
(bootloader) FB LockState: LOCKED
(bootloader) USER LockState: LOCKED
OKAY [ 0.012s]
finished. total time: 0.014s
badhabitsdiehard said:
Does this command: fastboot oem lock-state info work on your phone?
And putting the code Huawei sent you in this one fastboot oem frp-unlock?
Click to expand...
Click to collapse
Code:
$ fastboot oem frp-unlock {password censored}
...
FAILED (remote: password matching failed!!)
finished. total time: 0.211s
It is definitely the code I got from the Huawei Website.