Database Users

plz help p8 lite hang logo

i have p8 ale-l21 hang logo no recovery bootloader lock only go fastboot
cant flash with dload file any help plz

Use THIS instruction to extract the needed files from the UPDATE.APP file, and follow THIS instruction to flash them via fastboot.
Use your already downloaded UPDATE.APP file, and it should work fine, after flashing at least the BOOT, RECOVERY and SYSTEM partitions. If the UPDATE.APP has a CUST image, flash that too.

thx about quick reply
but how to flash recovery and boot with bootloader locked
sending 'boot' (22796 KB)...
FAILED (unknown status code)
finished. total time: 0.651s

mandolen said:
thx about quick reply
but how to flash recovery and boot with bootloader locked
sending 'boot' (22796 KB)...
FAILED (unknown status code)
finished. total time: 0.651s
Click to expand...
Click to collapse
Keep the phone in fastboot/bootloader mode and Try this command adb fastboot oem unlock.
Sent from my SM-J500F using XDA-Developers mobile app

im not have code unlock bootloader and product id and imie

Do you have the packaging of the phone? The box should have a label on the bottom, with your S/N and your IMEI.
If you send those two numbers to me in Private Message, I'll give you your bootloader unlock code in the reply.
If the S/N number is not present on the box itself, it still can be obtained. Connect the phone to your PC via fastboot, and type fastboot devices.
There should be only 1 list item, which is your phone, identified by it's S/N number.
The IMEI is often written on the invoice as well.
If you don't have these numbers, the only way you can get your phone back to life, is via repair.
If the phone got bricked while you was updating, the warranty should cover that. In this case, just return it, and you'll get a new one.
But if your phone was rooted without unlocking the bootloader, your warranty is void.
Note: please don't use colored, or formatted fonts if not necessary to do so. Thanks.
Note2: There should be a way to obtain all these information, even more, with fastboot, using the fastboot getvar all command, but seems like Huawei disabled this, for unkown reasons...

this my imie and s/n plz any one give me code unlock bootloader
imie1--869510020795934
imie2--869510020822670
s/n--W3D7N15B20006862

[SOLVED] P9 Lite (L31) bricked? Please help...

Hi,
I think my P9 Lite is bricked (L31) :crying:
It happened because I've tried to downgrade from Android N EMUI 5 beta to Android M (EMUI 4.1.1) with the dload folder method. I've extracted and put update.app of my B151 firmware inside then 3 buttons and update said successful, but now bootloop and I can't enter recovery or fastboot (vol down + pwr).... I'm stuck in eRecovery and Wifi check for update fails....
>>> EDIT: Okay, good, I can enter fastboot but it says:
"Please connect usb cable, blah blah" (My phone is connected)
Android boot reason
AP_S_COLDBOOT
NA
Volume_down_press_process_func
PHONE locked
FRP Unlock
----
Do I have to unlock the bootloader? If yes, how can I do since I can't boot on Android?
Can I unlock it with fastboot commands or other ways? How?
----
Currently, with fastboot commands, I can't flash system.img or recovery.img. For instance, trying to flash system.img or recovery.img, it says:
C:\Users\Supergren>fastboot flash system "d:/system.img"
target reported max download size of 471859200 bytes
sending sparse 'system' (451070 KB)...
OKAY [ 19.381s]
writing 'system'...
FAILED (remote: Command not allowed)
finished. total time: 19.395s
I guess it's because my bootloader is locked...
I'm a bit lost
>>> EDIT 2: to solve the bootloop after downgrading from N beta to M (b151), I just had to:
1- Shutdown my phone
2- Plug to my computer. That's what I forgot previously to be able to start fastboot mode!
3- Press Volume down + PWR
4- Once in fastboot/rescue mode, open cmd window on my PC and type:
fastboot oem unlock <unlock code> . (For instance: fastboot oem unlock 1234567890123456)
5- Follow unlock procedure instructions and then the phone does a factory reset.
6- The phone reboots and it's done

Wood Man said:
Hi,
I think my P9 Lite is bricked (L31) :crying:
I can enter fastboot but it says:
"Please connect usb cable, blah blah" (My phone is connected)
Android boot reason
AP_S_COLDBOOT
NA
Volume_down_press_process_func
PHONE locked
FRP Unlock
----
Do I have to unlock the bootloader? If yes, how can I do since I can't boot on Android?
Can I unlock it with fastboot commands or other ways? How?
----
Currently, with fastboot commands, I can't flash system.img or recovery.img. For instance, trying to flash system.img or recovery.img, it says;
...
FAILED (remote: Command not allowed)
...
I guess it's because my bootloader is locked...
I'm a bit lost
Click to expand...
Click to collapse
Maybe unlocking the bootloader may help. On fastboot you type fastboot oem unlock

Wood Man said:
Hi,
I think my P9 Lite is bricked (L31) :crying:
I can enter fastboot but it says:
"Please connect usb cable, blah blah" (My phone is connected)
Android boot reason
AP_S_COLDBOOT
NA
Volume_down_press_process_func
PHONE locked
FRP Unlock
----
Do I have to unlock the bootloader? If yes, how can I do since I can't boot on Android?
Can I unlock it with fastboot commands or other ways? How?
----
Currently, with fastboot commands, I can't flash system.img or recovery.img. For instance, trying to flash system.img or recovery.img, it says;
...
FAILED (remote: Command not allowed)
...
I guess it's because my bootloader is locked...
I'm a bit lost
Click to expand...
Click to collapse
To unlock bootloader type ,,fastboot oem unlock.......,,(.....is your unlock code)

To unlock the bootloadee you have to type :
fastboot oem unlock 1234567891234
Sent from my HUAWEI VNS-L31 using XDA Labs

You are all gods! It's solved!
Thanks a lot guys! I really appreciate your fast answers :good:
I've read on the web about the "fastboot oem unlock" method but I didn't know if it worked with P9 Lite. I was afraid to totally brick the phone.
See you later!
Edit: I've updated the thread title with [SOLVED] and wrote what I did to achieve this.

Hey ! You got the same problem as me, excuse me how did you get the unlock code if you couldn't boot the phone... I read and read and your problem was the same i have ... but when i got to fastboot i can't unlock, i dont have the unlock code sh**. Thank you and sorry for my english everybody i hope your eyes didn't hurt hehe
EDIT: I just got the unlock code but I think i'm screwed up... When in fastboot&rescue mode it says FRP Lock... sh**

1francis said:
Hey ! You got the same problem as me, excuse me how did you get the unlock code if you couldn't boot the phone... I read and read and your problem was the same i have ... but when i got to fastboot i can't unlock, i dont have the unlock code sh**. Thank you and sorry for my english everybody i hope your eyes didn't hurt hehe
EDIT: I just got the unlock code but I think i'm screwed up... When in fastboot&rescue mode it says FRP Lock... sh**
Click to expand...
Click to collapse
Frp lock means Factory Reset Protection. If it says Phone UNLOCKED means ur bootloader is unlocked.

1francis said:
Hey ! You got the same problem as me, excuse me how did you get the unlock code if you couldn't boot the phone... I read and read and your problem was the same i have ... but when i got to fastboot i can't unlock, i dont have the unlock code sh**. Thank you and sorry for my english everybody i hope your eyes didn't hurt hehe
EDIT: I just got the unlock code but I think i'm screwed up... When in fastboot&rescue mode it says FRP Lock... sh**
Click to expand...
Click to collapse
go to developer option and activate oem unlocking
this will unlock frp

Right. The issue is that phone is stuck on huawei logo

1francis said:
Right. The issue is that phone is stuck on huawei logo
Click to expand...
Click to collapse
Buy DC phoenix 15euros and flash it same happen to me last day

My phone it's blocked into huawei start screen

Hello,
Yesterday when I Wanting to charge the battery of my phone, it's suddenly turned off, and since it is stuck on the startup screen..
I have traveled dozens of French forums in search of a solution, I come back to you now because I am a little desperate
As for my phone, he was never rooted, and I never change firnware, I do not have access to recovery, there is only fastboot mode that works
In the fastboot mode, i can read "ap-s-abnormal-n/a et phone locked frp lock".
If I understand correctly, I can not flash my phone because it is blocked..
Please help me

Do you have Access to the huawei E-Recovery? Try doing a factory reset there.
Or try to unlock your Bootloader with ADB, Flash TWRP and then Flash a customrom or another Firmware.
I hope I was able to help you.
Greetings from Germany.

TheOldMan said:
Do you have Access to the huawei E-Recovery? Try doing a factory reset there.
Or try to unlock your Bootloader with ADB, Flash TWRP and then Flash a customrom or another Firmware.
I hope I was able to help you.
Greetings from Germany.
Click to expand...
Click to collapse
I don't have access to the recovery mode too
I tried to unlock my bootloader but to no avail, all of the flash commands are concluded with a "Writing **** FAILED", and ADB does not recognize my phone
Thanks for the reply !

Noflex said:
I don't have access to the recovery mode too
I tried to unlock my bootloader but to no avail, all of the flash commands are concluded with a "Writing **** FAILED", and ADB does not recognize my phone
Thanks for the reply !
Click to expand...
Click to collapse
Unlock bootloader again

Adi5 said:
Unlock bootloader again
Click to expand...
Click to collapse
With pleasure but how ?
When I try to do this in fastboot i have this
Code:
... FAILED (remote: Command not allowed)
My only solution at this time is DC phoenix unlocker but i'm not sure about the fiability, and I don't want pay for this..

My mate 9 has become a hard brick and I want to help for recovery.

My mate 9 has become a hard brick and I want to help for recovery.
I am Japanese and I am not good at English.
I apologize for being a difficult to read sentence
I purchased MATE 9(MHA-AL00 6GB/128GB).
However, the firmware was MHA-L29C636B183 from the beginning.
I tried updating to Android 8 but I failed.
Currently, it is in the following state.
1. When turn on the power,Huawei logo is not displayed
2. The screen is black and does not react even if the power button is pressed for a long time.
3. use Vol-Up + Power , Vol-Down + Power,3 Button does not respond.
4. However, when I run fastboot devices, The following is returned.
=====
C:\>fastboot devices
N8K021xxxxxxxxxx fastboot
=====
5. fastboot reboot-bootloader respond. but there is no change in the display.
=====
C:\>fastboot reboot-bootloader
rebooting into bootloader...
OKAY [ 0.023s]
finished. total time: 0.025s
=====
When Oreo update failed and turned on,
"ERROR 10 Boot.img" displayed on the screen where the droid doll is displayed,
and it can not start up.
I tried to recover with the following procedure No.1-4, but it got even worse.
https://forum.xda-developers.com/mate-9/how-to/guide-rebrand-chinese-al00-mate9-to-t3554656
Currently, fastboot may be usable. I installed TWRP but I can not use it.
eRecovery also does not work.
I am thinking that I can recover using FASTBOOT FLASH XXXX.IMG.
But I do not know which partition and how to update.
Please tell me about how to recover and related sites.
Thank you

have you tried turning it off and on?

;74563891 said:
My mate 9 has become a hard brick and I want to help for recovery.
I am Japanese and I am not good at English.
I apologize for being a difficult to read sentence
I purchased MATE 9(MHA-AL00 6GB/128GB).
However, the firmware was MHA-L29C636B183 from the beginning.
I tried updating to Android 8 but I failed.
Currently, it is in the following state.
1. When turn on the power,Huawei logo is not displayed
2. The screen is black and does not react even if the power button is pressed for a long time.
3. use Vol-Up + Power , Vol-Down + Power,3 Button does not respond.
4. However, when I run fastboot devices, The following is returned.
=====
C:\>fastboot devices
N8K021xxxxxxxxxx fastboot
=====
5. fastboot reboot-bootloader respond. but there is no change in the display.
=====
C:\>fastboot reboot-bootloader
rebooting into bootloader...
OKAY [ 0.023s]
finished. total time: 0.025s
=====
When Oreo update failed and turned on,
"ERROR 10 Boot.img" displayed on the screen where the droid doll is displayed,
and it can not start up.
I tried to recover with the following procedure No.1-4, but it got even worse.
https://forum.xda-developers.com/mate-9/how-to/guide-rebrand-chinese-al00-mate9-to-t3554656
Currently, fastboot may be usable. I installed TWRP but I can not use it.
eRecovery also does not work.
I am thinking that I can recover using FASTBOOT FLASH XXXX.IMG.
But I do not know which partition and how to update.
Please tell me about how to recover and related sites.
Thank you
Click to expand...
Click to collapse
Is Erecovery working?

what command that you use to flash twrp ??

le grande magnetto said:
have you tried turning it off and on?
Click to expand...
Click to collapse
wmfreak said:
Is Erecovery working?
Click to expand...
Click to collapse
Thank you for your reply.
I turned off the power, but it looks like the power is turned on automatically.
There is no screen display, but confirmed with fastboot devices.
I can not enter eRecovery screen.

superseventh said:
what command that you use to flash twrp ??
Click to expand...
Click to collapse
fastboot flash recovery TWRP8_3.0.3.img

;74565458 said:
fastboot flash recovery TWRP8_3.0.3.img
Click to expand...
Click to collapse
https://forum.xda-developers.com/mate-9/how-to/guide-mate-9-flash-update-package-t3593108
this link will guide you how to HWOTA to update ROM when you already have Oreo update.zip, update_data_public.zip, and update_all_hw.zip put these 3 files in to update folder
if this HWOTA that you download not work try this https://forum.xda-developers.com/mate-9/how-to/guide-mate-9-flash-oreo-update-package-t3699522
it is HWOTA8 to update to Oreo
if twrp won't work try this https://forum.xda-developers.com/mate-9/development/preliminary-twrp-3-1-1-0-mate-9-emui-8-t3687622

superseventh said:
https://forum.xda-developers.com/mate-9/how-to/guide-mate-9-flash-update-package-t3593108
this link will guide you how to HWOTA to update ROM when you already have Oreo update.zip, update_data_public.zip, and update_all_hw.zip put these 3 files in to update folder
if this HWOTA that you download not work try this https://forum.xda-developers.com/mate-9/how-to/guide-mate-9-flash-oreo-update-package-t3699522
it is HWOTA8 to update to Oreo
if twrp won't work try this https://forum.xda-developers.com/mate-9/development/preliminary-twrp-3-1-1-0-mate-9-emui-8-t3687622
Click to expand...
Click to collapse
Thank you for showing me three ways. Since I am going to work from now I will try after going home.
After that, as a result of investigation, I found out that the FRP is locked.
C:\>fastboot oem lock-state info
(bootloader) FB LockState: LOCKED
(bootloader) USER LockState: UNLOCKED
OKAY [ 0.008s]
finished. total time: 0.012s
I am looking for a way to unlock this using FASTBOOT.
If I erase a partition somewhere, will it be unlockd ?

;74570405 said:
Thank you for showing me three ways. Since I am going to work from now I will try after going home.
After that, as a result of investigation, I found out that the FRP is locked.
C:\>fastboot oem lock-state info
(bootloader) FB LockState: LOCKED
(bootloader) USER LockState: UNLOCKED
OKAY [ 0.008s]
finished. total time: 0.012s
I am looking for a way to unlock this using FASTBOOT.
If I erase a partition somewhere, will it be unlockd ?
Click to expand...
Click to collapse
when you rebrand and install ROM with dload and then sign in to Google account the FRP Locked will be dissappear
this following method be the same that you use it before
now try this
1- Unlock bootloader
2- install twrp,
3-do oeminfo backup in twrp,you should have a folder name twrp, inside this folder there is many subfolders.
In last folder there is 2-3 files,those files should be replaced with Oeminfo Al00 : https://www.mediafire.com/download/37n3jqv23j6erq5
Once replaced, put this folder on ur sd card and boot to twrp recovery than restore it.
4- download C00 offline firmware from third post here https://forum.xda-developers.com/ma...o-bootloop-t3534594/post70937310#post70937310 , Download B115 then extract the rar and copy dload folder to external sd card,turn off ur phone than press 3 buttons combination,power volume up and down till the update start.
5- when finished unlock bootloader again
6-install twrp again
7- flash hw_data for C00 in twrp http://update.hicloud.com:8180/TDS/.../v65567/f2/full/all/cn/update_full_all_cn.zip it will give an error, don't worry.
8-flash c00 offline firmware again to have locked bootloader and get rid of the warning message lol
9 factory rest from settings.
10-use system update to get the latest firmware, sometimes you need sim card inserted,and using the download latest package option.
11 done.

Currently, only FASTBOOT can be used,
FRP is preventing the overwriting of the partition,
so I can not try the suggested method.
I studied variously, but I can not find a good solution.
I am planning to use DC-Phoenix (paid service) in a few days.
It seems to be able to update ROM from FASTBOOT even when FRP is locked.

I tried DC-Phoenix, but as a result it failed. The FAST BOOT which I was able to use until now can not be used and the power can not be turned on.
I am disappointed that the method of recovery is gone.
Thank you for your support.

Bricked
GreenOcean said:
I tried DC-Phoenix, but as a result it failed. The FAST BOOT which I was able to use until now can not be used and the power can not be turned on.
I am disappointed that the method of recovery is gone.
Thank you for your support.
Click to expand...
Click to collapse
Well, with fastboot, adb, bootloader mode, and eRecovery gone there is not really a lot you can do short of returning the device to Huawei (hopefully you still have warranty) for a replacement. Just tell them your phone died.

error fastboot :/

hi anybody help me? im flashing non android rom such as luneos nexus gsm rom but not booted and not able to get recovery just fastboot mode but fastboot command is said remote: command not allowed. im unlocked bootloader. after fastboot oem unlock command fastboot says status mailformed 1 bytes. any body help solution for me? thank you for helping me.

im using debian on my computer

MolnarMilanDorian said:
hi anybody help me? im flashing non android rom such as luneos nexus gsm rom but not booted and not able to get recovery just fastboot mode but fastboot command is said remote: command not allowed. im unlocked bootloader. after fastboot oem unlock command fastboot says status mailformed 1 bytes. any body help solution for me? thank you for helping me.
Click to expand...
Click to collapse
Fastboot boot doesn't work for some reason on Huawei P8 lite. You need to flash the recovery first and then boot to it by holding vol + and power.

Botar230 said:
Fastboot boot doesn't work for some reason on Huawei P8 lite. You need to flash the recovery first and then boot to it by holding vol + and power.
Click to expand...
Click to collapse
I have the same issue and when i trying to flash the stock recovery it says command not allowed but when flashing custom recovery like TWRP it flashing but i cant get into it if anyone can help please because i go to a lot of services centers and they say that the phone is dead and i have to throw it in the trash:crying::crying::crying::crying:

Abdala2307 said:
I have the same issue and when i trying to flash the stock recovery it says command not allowed but when flashing custom recovery like TWRP it flashing but i cant get into it if anyone can help please because i go to a lot of services centers and they say that the phone is dead and i have to throw it in the trash:crying::crying::crying::crying:
Click to expand...
Click to collapse
Download this recovery , flash it by typing "fastboot flash recovery <path>.img", after flashing reboot the phone by typing "fastboot reboot", then unplug the USB cable and hold the power button to shut the phone down. Now hold the Vol+ and power button at the same time, release the buttons when the Huawei logo appears, and you should be in TWRP.

Botar230 said:
Download this recovery , flash it by typing "fastboot flash recovery <path>.img", after flashing reboot the phone by typing "fastboot reboot", then unplug the USB cable and hold the power button to shut the phone down. Now hold the Vol+ and power button at the same time, release the buttons when the Huawei logo appears, and you should be in TWRP.
Click to expand...
Click to collapse
I will give a try but i tell when i flashing any recovery i cant get into it

sorry but recovery.img is not working for me because fastboot says remote: command not allowed so im need p8 lite unlock bootloader code because badly installed luneos is relocking my bootloader so please send unlock code for me. thanks

MolnarMilanDorian said:
sorry but recovery.img is not working for me because fastboot says remote: command not allowed so im need p8 lite unlock bootloader code because badly installed luneos is relocking my bootloader so please send unlock code for me. thanks
Click to expand...
Click to collapse
You have to fill this , then Huawei will send the code to you in 24 hours.

Botar230 said:
You have to fill this , then Huawei will send the code to you in 24 hours.
Click to expand...
Click to collapse
thank you im feel this and sending code but not working for me fastboot says password wrong. im give product id with imei24.com but im think it is generated product id not original :/ can you help me? how can im find original product id for my bricked p8 lite?