Database Users

[8/6/16] Unbrick RN3 from HS USB 900E with modified fastboot file

Found a way to reboot to edl mode from fastboot
All credits to @emuzychenko
1) Download modified fastboot file
2) Reboot your phone to fastboot
3) Double click on edl.cmd
4) You are on 9008/edl mode
5) Flash any fastboot image from Mi flash
You successfully unbricked your device

Hi
Try with that method also. It seams to work .

Next time I brick it again (trust me, it will happen) I will give those a try.

This is the solution www(dot)htcmania.com(/)showthread(dot)php?t=1163463
Cheked by me, the brick was to try to unlock the bootloader without the Xiaomi message.
Sorry for my english, bu ti hope to be helpful.
To restore the default Bootloader copy paste the emmc_appsboot.mbn from Fastboot Rom to the Adb foldee
and type command on cmd
fastboot flash aboot emmc_appsboot.mbn
fastboot flash abootbak emmc_appsboot.mbn
fastboot reboot

For those who have failed and stuck on "HS USB 900E" and the bootloader stick locked here is the solution :
1. Enter fastboot by holding vol down + power
2. Plug your RN3Pro to PC
2. Flash original bootloader from official fastboot firmware
fastboot flash aboot emmc_appsboot.mbn
fastboot flash abootbak emmc_appsboot.mbn
3. Type again :
fastboot reboot
and quickly hold volume up untuk it enter "sideload" mode
4. Install Mi PC Suite from this link en.miui.com/thread-225600-1-1.html
5. Let the Mi PC Suite download the latest chinese firmware, just sit and wait until it done
6. Lets Brick the beast again

parfetto said:
Hi
Try with that method also. It seams to work .
Click to expand...
Click to collapse
this method only works for few very people, everyone cant access adb through recovery.

apixbuanget said:
For those who have failed and stuck on "HS USB 900E" and the bootloader stick locked here is the solution :
1. Enter fastboot by holding vol down + power
2. Plug your RN3Pro to PC
2. Flash original bootloader from official fastboot firmware
fastboot flash aboot emmc_appsboot.mbn
fastboot flash abootbak emmc_appsboot.mbn
3. Type again :
fastboot reboot
and quickly hold volume up untuk it enter "sideload" mode
4. Install Mi PC Suite from this link en.miui.com/thread-225600-1-1.html
5. Let the Mi PC Suite download the latest chinese firmware, just sit and wait until it done
6. Lets Brick the beast again
Click to expand...
Click to collapse
Have you tested this method yourself? I think this is for people who bricked the device but had stock recovery inside, what about people who has twrp and bricked the device? Also I dont think you can flash anything through fastboot in locked bootloader

IT WORKS
apixbuanget said:
For those who have failed and stuck on "HS USB 900E" and the bootloader stick locked here is the solution :
1. Enter fastboot by holding vol down + power
2. Plug your RN3Pro to PC
2. Flash original bootloader from official fastboot firmware
fastboot flash aboot emmc_appsboot.mbn
fastboot flash abootbak emmc_appsboot.mbn
3. Type again :
fastboot reboot
and quickly hold volume up untuk it enter "sideload" mode
4. Install Mi PC Suite from this link en.miui.com/thread-225600-1-1.html
5. Let the Mi PC Suite download the latest chinese firmware, just sit and wait until it done
6. Lets Brick the beast again
Click to expand...
Click to collapse
Worked like a magic. I can confirm for sure. Was stuck at HS USB 900E with locked bootloader.

Rajdip said:
Have you tested this method yourself? I think this is for people who bricked the device but had stock recovery inside, what about people who has twrp and bricked the device? Also I dont think you can flash anything through fastboot in locked bootloader
Click to expand...
Click to collapse
Yeah i bricked mine with twrp .. and i cannot enter into recovery mode now.. only fastboot works and i cannot flash stock recovery too because the bootloader is locked :/ stupid Mi :/

Dharani_V said:
Yeah i bricked mine with twrp .. and i cannot enter into recovery mode now.. only fastboot works and i cannot flash stock recovery too because the bootloader is locked :/ stupid Mi :/
Click to expand...
Click to collapse
So, did you try above mentioned method?

amsmu said:
So, did you try above mentioned method?
Click to expand...
Click to collapse
Yes i did .. and its not allowing me to flash anything .. Getting Error Device is locked :/

failed bro, getting error device is locked using QFIL.:crying:

Guys, please mention the reason behind your device getting bricked too when you are reporting what worked and what didn't. Like whether during unlock bootloader process(without xiaomi's permission) or flashing custom ROM(most probably MIUI official updates) via twrp.

Dharani_V said:
Yes i did .. and its not allowing me to flash anything .. Getting Error Device is locked :/
Click to expand...
Click to collapse
What were you doing when it bricked?

Go to service center. They will repair it

mine happened same..... hard bricked my mobile after restoring original bootloader.......
QFIL cannot do a thing ..... all the eror i get is unable to go to EDl mode......
nothing for me except download mode and fastboot......
so toook to service centre and got it repaired for free in 2hrs

puli where do u live[emoji14]
Sent from my Redmi Note 3 using XDA-Developers mobile app

Rajdip said:
Have you tested this method yourself? I think this is for people who bricked the device but had stock recovery inside, what about people who has twrp and bricked the device? Also I dont think you can flash anything through fastboot in locked bootloader
Click to expand...
Click to collapse
i've tried this myself. In HS USB 900E you can flash aboot through fastboot whether you stock recovery or twrp before bricked.

Rajdip said:
I have found few ways by which people may unbrick from HS USB 900E state without test point, but those guides are for other devices, needs thorough testing for Redmi note 3.
Tools needed:-
1) QPST http://www.androidbrick.com/downloa...qcn-for-lollipop-android-5-0-6-0-marshmallow/
2)Nubia tool studio https://drive.google.com/folderview?id=0BwtoIMKf470SRUxfdHA5cU14ZTQ#
Now follow these guides for reference,
1)http://www.androidbrick.com/ultimat...ide-snapdragons-are-unbrickable-qhsusb_dload/
2)http://www.androidbrick.com/unbrick...-you-have-the-right-kind-of-rom-qhsusb_dload/
Only people with hardbrick(900E) and locked bootloader can this test methods, Please try and leave your feedback, maybe we will find a way to unbrick without opening the phone and voiding warranty. Good Luck
Click to expand...
Click to collapse
Does anyone success ? Please share a guide !

apixbuanget said:
i've tried this myself. In HS USB 900E you can flash aboot through fastboot whether you stock recovery or twrp before bricked.
Click to expand...
Click to collapse
wow!!! thats great, but before you flashed aboot through fastboot did you check whether your bootloader was locked or not?

[SOLVED] P9 Lite (L31) bricked? Please help...

Hi,
I think my P9 Lite is bricked (L31) :crying:
It happened because I've tried to downgrade from Android N EMUI 5 beta to Android M (EMUI 4.1.1) with the dload folder method. I've extracted and put update.app of my B151 firmware inside then 3 buttons and update said successful, but now bootloop and I can't enter recovery or fastboot (vol down + pwr).... I'm stuck in eRecovery and Wifi check for update fails....
>>> EDIT: Okay, good, I can enter fastboot but it says:
"Please connect usb cable, blah blah" (My phone is connected)
Android boot reason
AP_S_COLDBOOT
NA
Volume_down_press_process_func
PHONE locked
FRP Unlock
----
Do I have to unlock the bootloader? If yes, how can I do since I can't boot on Android?
Can I unlock it with fastboot commands or other ways? How?
----
Currently, with fastboot commands, I can't flash system.img or recovery.img. For instance, trying to flash system.img or recovery.img, it says:
C:\Users\Supergren>fastboot flash system "d:/system.img"
target reported max download size of 471859200 bytes
sending sparse 'system' (451070 KB)...
OKAY [ 19.381s]
writing 'system'...
FAILED (remote: Command not allowed)
finished. total time: 19.395s
I guess it's because my bootloader is locked...
I'm a bit lost
>>> EDIT 2: to solve the bootloop after downgrading from N beta to M (b151), I just had to:
1- Shutdown my phone
2- Plug to my computer. That's what I forgot previously to be able to start fastboot mode!
3- Press Volume down + PWR
4- Once in fastboot/rescue mode, open cmd window on my PC and type:
fastboot oem unlock <unlock code> . (For instance: fastboot oem unlock 1234567890123456)
5- Follow unlock procedure instructions and then the phone does a factory reset.
6- The phone reboots and it's done

Wood Man said:
Hi,
I think my P9 Lite is bricked (L31) :crying:
I can enter fastboot but it says:
"Please connect usb cable, blah blah" (My phone is connected)
Android boot reason
AP_S_COLDBOOT
NA
Volume_down_press_process_func
PHONE locked
FRP Unlock
----
Do I have to unlock the bootloader? If yes, how can I do since I can't boot on Android?
Can I unlock it with fastboot commands or other ways? How?
----
Currently, with fastboot commands, I can't flash system.img or recovery.img. For instance, trying to flash system.img or recovery.img, it says;
...
FAILED (remote: Command not allowed)
...
I guess it's because my bootloader is locked...
I'm a bit lost
Click to expand...
Click to collapse
Maybe unlocking the bootloader may help. On fastboot you type fastboot oem unlock

Wood Man said:
Hi,
I think my P9 Lite is bricked (L31) :crying:
I can enter fastboot but it says:
"Please connect usb cable, blah blah" (My phone is connected)
Android boot reason
AP_S_COLDBOOT
NA
Volume_down_press_process_func
PHONE locked
FRP Unlock
----
Do I have to unlock the bootloader? If yes, how can I do since I can't boot on Android?
Can I unlock it with fastboot commands or other ways? How?
----
Currently, with fastboot commands, I can't flash system.img or recovery.img. For instance, trying to flash system.img or recovery.img, it says;
...
FAILED (remote: Command not allowed)
...
I guess it's because my bootloader is locked...
I'm a bit lost
Click to expand...
Click to collapse
To unlock bootloader type ,,fastboot oem unlock.......,,(.....is your unlock code)

To unlock the bootloadee you have to type :
fastboot oem unlock 1234567891234
Sent from my HUAWEI VNS-L31 using XDA Labs

You are all gods! It's solved!
Thanks a lot guys! I really appreciate your fast answers :good:
I've read on the web about the "fastboot oem unlock" method but I didn't know if it worked with P9 Lite. I was afraid to totally brick the phone.
See you later!
Edit: I've updated the thread title with [SOLVED] and wrote what I did to achieve this.

Hey ! You got the same problem as me, excuse me how did you get the unlock code if you couldn't boot the phone... I read and read and your problem was the same i have ... but when i got to fastboot i can't unlock, i dont have the unlock code sh**. Thank you and sorry for my english everybody i hope your eyes didn't hurt hehe
EDIT: I just got the unlock code but I think i'm screwed up... When in fastboot&rescue mode it says FRP Lock... sh**

1francis said:
Hey ! You got the same problem as me, excuse me how did you get the unlock code if you couldn't boot the phone... I read and read and your problem was the same i have ... but when i got to fastboot i can't unlock, i dont have the unlock code sh**. Thank you and sorry for my english everybody i hope your eyes didn't hurt hehe
EDIT: I just got the unlock code but I think i'm screwed up... When in fastboot&rescue mode it says FRP Lock... sh**
Click to expand...
Click to collapse
Frp lock means Factory Reset Protection. If it says Phone UNLOCKED means ur bootloader is unlocked.

1francis said:
Hey ! You got the same problem as me, excuse me how did you get the unlock code if you couldn't boot the phone... I read and read and your problem was the same i have ... but when i got to fastboot i can't unlock, i dont have the unlock code sh**. Thank you and sorry for my english everybody i hope your eyes didn't hurt hehe
EDIT: I just got the unlock code but I think i'm screwed up... When in fastboot&rescue mode it says FRP Lock... sh**
Click to expand...
Click to collapse
go to developer option and activate oem unlocking
this will unlock frp

Right. The issue is that phone is stuck on huawei logo

1francis said:
Right. The issue is that phone is stuck on huawei logo
Click to expand...
Click to collapse
Buy DC phoenix 15euros and flash it same happen to me last day

Help please, endless bootloop

I have tried downgraded my phone from nougat, but has ended in at bootloop only showing the red Huawei Logo.
Now i can´t enter recovery, can´t update using 3 button method only thing i can access is fastboot.
My problem is my bootloader is locked and therefore i can´t flash an recovery. And now i cannot figure out how to obtain my product key, so i can unlock the bootloader.
Any1 who can help me with this would be much appreciate.

What did you do exactly to end with endless bootloop?

I used the rollback file from this Thread:
https://forum.xda-developers.com/hu...torial-rollback-n-to-mm-c432-devices-t3563955
Update went fine but afterwards it ended in a bootloop. The only thing i can access is fastboot.
The weird thing is that in fastboot it says my bootlader is unlocked with red, but i cant install an recovery. Its says acess denied and ask if i'm sure my bootloader is unlocked.
And thats why im back to trying to unlock the bootloader but i cant get the product id for my phone when i can't turn in on.. seems hopeless

I suppose that you did 3 button update metod. You have to factory reset phone. Press volume up and power button together and keep pressed until you see erecovery option for factory reset phone. Do it.

KAngelo said:
I have tried downgraded my phone from nougat, but has ended in at bootloop only showing the red Huawei Logo.
Now i can´t enter recovery, can´t update using 3 button method only thing i can access is fastboot.
My problem is my bootloader is locked and therefore i can´t flash an recovery. And now i cannot figure out how to obtain my product key, so i can unlock the bootloader.
Any1 who can help me with this would be much appreciate.
Click to expand...
Click to collapse
Post here IMEI+SN and i can try to get you bootloader unlock code.

gtdaniel said:
Post here IMEI+SN and i can try to get you bootloader unlock code.
Click to expand...
Click to collapse
Imei1: 863066034949799
Imei2: 863066034975810
Can't remember which is the right one
Sn: FUH7N16A08001972
Thank you so much for the help

maka1105 said:
I suppose that you did 3 button update metod. You have to factory reset phone. Press volume up and power button together and keep pressed until you see erecovery option for factory reset phone. Do it.
Click to expand...
Click to collapse
I cant. Have tried all the button combinations to enter both recovery and update mode but nothing works, only vibrates and showing huawei logo. Only thing i can access is fastboot through computer

With huawei extractor extract (from B160 or what ever firmware is your phone) system, boot, and recovery img and flash with adb. Than you have to do reset.

maka1105 said:
With huawei extractor extract (from B160 or what ever firmware is your phone) system, boot, and recovery img and flash with adb. Than you have to do reset.
Click to expand...
Click to collapse
Thanks for the suggestion.
When i try flashing it with adb it starts writing but then says "Failed (remote: Command not allowed)
Should have installed the proper drivers but still not working.
Same thing if try flashing with the L31 toolkit. Here it says "Something went wrong! - Maybe your boot-loader is locked?"
The only thing i can think of, is trying to unlock my bootloader again and see if its work. Even though it says unlocked in fastboot mode. But for that i still need the product id for my phone which i can´t get???

KAngelo said:
Imei1: 863066034949799
Imei2: 863066034975810
Can't remember which is the right one
Sn: FUH7N16A08001972
Thank you so much for the help
Click to expand...
Click to collapse
Your bootloader unlock code is: 1216684107248235
PS: until you unlock bootloader you can not flash anything...

Need Correct Firmware
i downgraded set 7.0 to 6.0 than this problem came
huawei
VNS-L31
imei
869315022035713
866655025440904
i have set not going in fastboot for install TWRP etc
set only going in upgrade mode when i Power UP but i tried but cant install UPDATE.APP via SD card because it always stop at 5% installing update

maplegsm said:
i downgraded set 7.0 to 6.0 than this problem came
huawei
VNS-L31
imei
869315022035713
866655025440904
i have set not going in fastboot for install TWRP etc
set only going in upgrade mode when i Power UP but i tried but cant install UPDATE.APP via SD card because it always stop at 5% installing update
Click to expand...
Click to collapse
You need corect oeminfo...

i restore set in fastboot mode but i cant install twrp or any other recovery
i also need bootloader unlock code
C:\>fastboot devices
3DN7N16427001072 fastboot
C:\>fastboot flash recovery twrp.img
target reported max download size of 471859200 bytes
sending 'recovery' (27434 KB)...
OKAY [ 0.938s]
writing 'recovery'...
FAILED (remote: Command not allowed)
finished. total time: 0.944s
C:\>
C:\>fastboot oem get-bootinfo
...
(bootloader) unlocked
OKAY [ 0.006s]
finished. total time: 0.006s
C:\>
dc unlocker info
Found Phone : HUAWEI VNS-L31
Model : Huawei phone in fastboot mode
IMEI : 869315022035713
Serial NR. : 3DN7N16427001072
Firmware : NRD90M test-keys
IMEI:866655025440904
FB LockState: LOCKED
USER LockState: LOCKED
unlocked
Battery state: 0

delete

gtdaniel said:
Your bootloader unlock code is: 1216684107248235
PS: until you unlock bootloader you can not flash anything...
Click to expand...
Click to collapse
Thanks man! my bootloader is now unlocked
But now i ran in to the next problem. Im able to flash now in adb but i cant seem to enter recovery? I tried flashing many different recoveries and the button combinations to enter them but i cant?
Any idea what to do

I Have the same problem. I cannot flash any recovery and files .img How to fix that?
I can boot to fastboot.

bootloop also, can do nothing
gtdaniel said:
Your bootloader unlock code is: 1216684107248235
PS: until you unlock bootloader you can not flash anything...
Click to expand...
Click to collapse
hello sir, could i also get the unlock bootloader code. RIGHT know, my phone in bootloop state. I have my bootloader lock, I can't enter fastboot. Nothing can do. here is my imei and sn:
imei: 860514035314136
sn : FKC4C16916001923

denduro said:
hello sir, could i also get the unlock bootloader code. RIGHT know, my phone in bootloop state. I have my bootloader lock, I can't enter fastboot. Nothing can do. here is my imei and sn:
imei: 860514035314136
sn : FKC4C16916001923
Click to expand...
Click to collapse
unlock bootloader code is not eligible for that IMEI (14 days limit...)
anyway, if you can not enter in fastboot mode, you can do anything...
go to service center or try DC Phoenix via a small fee (10-20 euros)...

i can enter fastboot, what next?
gtdaniel said:
unlock bootloader code is not eligible for that IMEI (14 days limit...)
anyway, if you can not enter in fastboot mode, you can do anything...
go to service center or try DC Phoenix via a small fee (10-20 euros)...
Click to expand...
Click to collapse
I have entered fastboot. It said phone unlocked, FRP unlock. Then, what else I have to do?

denduro said:
I have entered fastboot. It said phone unlocked, FRP unlock. Then, what else I have to do?
Click to expand...
Click to collapse
go to service center or try DC Phoenix...
for unlock code you have to login your Huawei ID atleast 14 days...
i suppose you can't do that...

frp lock

anyone know how to unlock FRP LOCK on fastboot & rescue mode

menggy71 said:
anyone know how to unlock FRP LOCK on fastboot & rescue mode
Click to expand...
Click to collapse
Same Problem...cannt enter TWRP and FRP is locked...how can i unlock FRP???
Please help!

hello any news , i have the same problem Mediapad will booting but can't .
frp is locked please Help

menggy71 said:
anyone know how to unlock FRP LOCK on fastboot & rescue mode
Click to expand...
Click to collapse
why u need to unlock FRP LOCK in fastboot mode?

Hi, i want to flash recovery twrp again ..
I become this error:
fastboot flash recovery twrp.img FAILED (remote: Command not allowed)
My Tab hangs in a boot loop
The problem starts with update to emu 5 ... dload etc..
after that i lost my twrp on the tab.
This is by tab state
FB LockState: LOCKED
USER LockState: UNLOCKED

burgi110 said:
Hi, i want to flash recovery twrp again ..
I become this error:
fastboot flash recovery twrp.img FAILED (remote: Command not allowed)
My Tab hangs in a boot loop
The problem starts with update to emu 5 ... dload etc..
after that i lost my twrp on the tab.
This is by tab state
FB LockState: LOCKED
USER LockState: UNLOCKED
Click to expand...
Click to collapse
first of all u need find ROLLBACK 7 to 6 android and official stock version for your mediapad version (c...b...) download it. open zip. unzip update.app copy it in SDcard\DLOAD then turn off your mediapad and start it with 3 button power vol+ and vol- at the same time. after that unzip update.zip from official stock version copy update.app to SDCARD\Dload and do the same 3 button metod then start your mediapad and unlock FRP in settings( rollback update must be nearly 100 mb . and stock version nearly 3-3.5 GB) MAYBE IT HELPS

DenPim said:
first of all u need find ROLLBACK 7 to 6 android and official stock version for your mediapad version (c...b...) download it. open zip. unzip update.app copy it in SDcard\DLOAD then turn off your mediapad and start it with 3 button power vol+ and vol- at the same time. after that unzip update.zip from official stock version copy update.app to SDCARD\Dload and do the same 3 button metod then start your mediapad and unlock FRP in settings( rollback update must be nearly 100 mb . and stock version nearly 3-3.5 GB) MAYBE IT HELPS
Click to expand...
Click to collapse
thx , but it does not work i have format sd fat32 put in the file(UPDATE.APP) under /dload an press the buttons , but the tablet is doing nothing
i see the menue with
When i am in Fastboot is see red phone unlock and gree frp lock
Ive i try any fastboot commands to flash
fastboot flash recovery twrp.img FAILED (remote: Command not allowed)
1 to continue
2 press up key
3 your device will continue
... i see alwyas Your device is booting now ..

burgi110 said:
thx , but it does not work
OK need your version c....b..... this one can help u but it's not priceless, https://www.dc-unlocker.com/faq
Click to expand...
Click to collapse

DenPim said:
burgi110 said:
thx , but it does not work
OK need your version c....b..... this one can help u but it's not priceless, https://www.dc-unlocker.com/faq
Click to expand...
Click to collapse
I had try this but this is not working for media pad m3 15 euros for cat :crying:
My next problem is that the battery is low and tabled is not going out .so i cant load it and the battery is empty
It was overnight on 2A but battery is still empty
Click to expand...
Click to collapse

DC Phoenix Firmware write (valid for 72h/phone) this one works with my mediapad m3 i download my firmware c100b009, try to write in tech support to bring your money back

My phone it's blocked into huawei start screen

Hello,
Yesterday when I Wanting to charge the battery of my phone, it's suddenly turned off, and since it is stuck on the startup screen..
I have traveled dozens of French forums in search of a solution, I come back to you now because I am a little desperate
As for my phone, he was never rooted, and I never change firnware, I do not have access to recovery, there is only fastboot mode that works
In the fastboot mode, i can read "ap-s-abnormal-n/a et phone locked frp lock".
If I understand correctly, I can not flash my phone because it is blocked..
Please help me

Do you have Access to the huawei E-Recovery? Try doing a factory reset there.
Or try to unlock your Bootloader with ADB, Flash TWRP and then Flash a customrom or another Firmware.
I hope I was able to help you.
Greetings from Germany.

TheOldMan said:
Do you have Access to the huawei E-Recovery? Try doing a factory reset there.
Or try to unlock your Bootloader with ADB, Flash TWRP and then Flash a customrom or another Firmware.
I hope I was able to help you.
Greetings from Germany.
Click to expand...
Click to collapse
I don't have access to the recovery mode too
I tried to unlock my bootloader but to no avail, all of the flash commands are concluded with a "Writing **** FAILED", and ADB does not recognize my phone
Thanks for the reply !

Noflex said:
I don't have access to the recovery mode too
I tried to unlock my bootloader but to no avail, all of the flash commands are concluded with a "Writing **** FAILED", and ADB does not recognize my phone
Thanks for the reply !
Click to expand...
Click to collapse
Unlock bootloader again

Adi5 said:
Unlock bootloader again
Click to expand...
Click to collapse
With pleasure but how ?
When I try to do this in fastboot i have this
Code:
... FAILED (remote: Command not allowed)
My only solution at this time is DC phoenix unlocker but i'm not sure about the fiability, and I don't want pay for this..