plz help p8 lite hang logo - P8lite Q&A, Help & Troubleshooting

i have p8 ale-l21 hang logo no recovery bootloader lock only go fastboot
cant flash with dload file any help plz

Use THIS instruction to extract the needed files from the UPDATE.APP file, and follow THIS instruction to flash them via fastboot.
Use your already downloaded UPDATE.APP file, and it should work fine, after flashing at least the BOOT, RECOVERY and SYSTEM partitions. If the UPDATE.APP has a CUST image, flash that too.

thx about quick reply
but how to flash recovery and boot with bootloader locked
sending 'boot' (22796 KB)...
FAILED (unknown status code)
finished. total time: 0.651s

mandolen said:
thx about quick reply
but how to flash recovery and boot with bootloader locked
sending 'boot' (22796 KB)...
FAILED (unknown status code)
finished. total time: 0.651s
Click to expand...
Click to collapse
Keep the phone in fastboot/bootloader mode and Try this command adb fastboot oem unlock.
Sent from my SM-J500F using XDA-Developers mobile app

im not have code unlock bootloader and product id and imie

Do you have the packaging of the phone? The box should have a label on the bottom, with your S/N and your IMEI.
If you send those two numbers to me in Private Message, I'll give you your bootloader unlock code in the reply.
If the S/N number is not present on the box itself, it still can be obtained. Connect the phone to your PC via fastboot, and type fastboot devices.
There should be only 1 list item, which is your phone, identified by it's S/N number.
The IMEI is often written on the invoice as well.
If you don't have these numbers, the only way you can get your phone back to life, is via repair.
If the phone got bricked while you was updating, the warranty should cover that. In this case, just return it, and you'll get a new one.
But if your phone was rooted without unlocking the bootloader, your warranty is void.
Note: please don't use colored, or formatted fonts if not necessary to do so. Thanks.
Note2: There should be a way to obtain all these information, even more, with fastboot, using the fastboot getvar all command, but seems like Huawei disabled this, for unkown reasons...

this my imie and s/n plz any one give me code unlock bootloader
imie1--869510020795934
imie2--869510020822670
s/n--W3D7N15B20006862

Related

Huawei Software installing Loop!

Hey, i tried to install the android 6.0 beta from this forum, but i was rooted, now its stuck in a loop where it turns off, turns on and tries to install it and fails at 0%, and again. I can enter Fastboot/rescue mode and thats it. I tried to flash recovery boot and system.img in adb and fastboot, but it shows this:
C:\Program Files\Minimal ADB and Fastboot>fastboot flash recovery recovery.img
target reported max download size of 471859200 bytes
sending 'recovery' (31630 KB)...
OKAY [ 1.265s]
writing 'recovery'...
FAILED (remote: Command not allowed)
finished. total time: 1.265s
C:\Program Files\Minimal ADB and Fastboot>fastboot flash boot boot.img
target reported max download size of 471859200 bytes
sending 'boot' (22796 KB)...
OKAY [ 0.858s]
writing 'boot'...
FAILED (remote: Command not allowed)
finished. total time: 0.874s
C:\Program Files\Minimal ADB and Fastboot>fastboot flash system.img
unknown partition 'SYSTEM.img'
error: cannot determine image filename for 'SYSTEM.im
C:\Program Files\Minimal ADB and Fastboot>fastboot flash system system.img
target reported max download size of 471859200 bytes
Help pls. I tried everything...
System.img flash failed after 2 mins now too. Still no idea.
Looks like you've used the KingRoot method to root your phone.
Flashing via fastboot requires the fastboot to be unlocked.
The message "FAILED (remote: Command not allowed)" indicates, that the script tried to execute the command, but because the bootloader is still locked, it cannot do such thing.
There are 2 solutions:
Download the original firmware and try to update to it via the "dload" method. (sdCard>dload>UPDATE.APP)
Try to unlock the bootloader. But for unlocking, you'll need the Product ID, which as of now, only obtainable, when the phone is able to boot up.
I really recommend trying to download the firmware, and give the "dload" method a shot, because without an unlocked bootloader, nothing you can do at home.
Right, it's almost nothing. There's this site called DC-Unlocker, and with a fast runthrough, it should be able to unlock the bootloader, but I haven't tried, or tested it in any way. Still an interesting program, though.
Edit:
Just saw your post under the other similar topic.
You should try to do a Factory Reset, by hand, via fastboot, and then updating with the "dload" method again.
The commands are:
fastboot erase cache
fastboot erase userdata
Maybe this helps.
daviddosa said:
Looks like you've used the KingRoot method to root your phone.
Flashing via fastboot requires the fastboot to be unlocked.
The message "FAILED (remote: Command not allowed)" indicates, that the script tried to execute the command, but because the bootloader is still locked, it cannot do such thing.
There are 2 solutions:
Download the original firmware and try to update to it via the "dload" method. (sdCard>dload>UPDATE.APP)
Try to unlock the bootloader. But for unlocking, you'll need the Product ID, which as of now, only obtainable, when the phone is able to boot up.
I really recommend trying to download the firmware, and give the "dload" method a shot, because without an unlocked bootloader, nothing you can do at home.
Right, it's almost nothing. There's this site called DC-Unlocker, and with a fast runthrough, it should be able to unlock the bootloader, but I haven't tried, or tested it in any way. Still an interesting program, though.
Click to expand...
Click to collapse
Ive got all the informations for getting the bootloader unlock code, but when i type it in the thing by huawei to get the unlock code it tells me that its wrong... I could get it here if you could help me with it?
Hello,
I'd like to request a bootloader unlock code for my Huawei device
Information:
Product: HUAWEI ALE-L21
SN:
IMEI:Nvm
Product IDups.
Thank you!
So, this is the e-mail i sent to Huawei, they couldnt help me. Everything here is directly from the phone itself, so i dont think its wrong.
With the Product ID, you can get the code, but the details above are wrong, more precisely one of them, which is the Phone Name
Try it without the HUAWEI, it should look like this: "ALE-L21" (without the " of course).
If it somehow would not work for you, I sent you a PM with your unlock code in it.
Note: I recommend not to publish your information like this. The phone is blockable with the IMEI remotely by the service providers or the police. Please remove them for your own safety.
Tried the update again, now flashing doesnt even work.

Blasted kingroot - bricked my phone?

Ahh, hind sight is a wonderful thing.
After trying to use kingroot to get root access, it failed. And a few days later after rebooting.
I'm now stuck at bootup with Start Up Failed.
hab check failed for boot
Failed to verify hab image boot
failed to validate boot image
I've now tried lot's of different things, over the last few hours.
RSDLite (show device brings no thing up)
Unlock bootloader (request key, but error regarding OEM unlock not being set - no access to now set it LOL)
Downloaded stock X_Play_UK_Retail_XT1562_LPD23.118-10_CFC.xml.zip, and tried using various guides on fastboot but keep getting remote failed.
I'm on stock recovery (obviously still locked).
Any thoughts, or hope from anyone?
Obviously, not sure what support Motorola would provide for what is essentially my own fault?
Have you tried manually flashing each bit of the stock firmware/image. That might help. There's a good guide here which I followed to unbrick my device. Just follow the instructions http://theunlockr.com/2015/09/22/how-to-unroot-the-motorola-moto-x-play/
Or try this one.
http://forum.xda-developers.com/showthread.php?t=2499926
Tried the first fastboot oem lock begin but get ... (althought my phone is locked already)
(bootloader) Not supported command in current status!
FAILED (remote failure)
finished. total time: 0.063s
So stepping to next command, I get:
C:\Program Files (x86)\Minimal ADB and Fastboot>fastboot flash partition gpt.bin
(bootloader) has-slotartition: not found
target reported max download size of 268435456 bytes
sending 'partition' (32 KB)...
OKAY [ 0.166s]
writing 'partition'...
(bootloader) Preflash validation failed
FAILED (remote failure)
finished. total time: 1.078s
sharebubbles said:
Tried the first fastboot oem lock begin but get ... (althought my phone is locked already)
(bootloader) Not supported command in current status!
FAILED (remote failure)
finished. total time: 0.063s
So stepping to next command, I get:
C:\Program Files (x86)\Minimal ADB and Fastboot>fastboot flash partition gpt.bin
(bootloader) has-slotartition: not found
target reported max download size of 268435456 bytes
sending 'partition' (32 KB)...
OKAY [ 0.166s]
writing 'partition'...
(bootloader) Preflash validation failed
FAILED (remote failure)
finished. total time: 1.078s
Click to expand...
Click to collapse
I think you need to unlock the bootloader and then start with the 'fastboot oem lock begin' command. You can't flash a system image with a locked bootloader. Let me know how it goes!
DTLblaze said:
I think you need to unlock the bootloader and then start with the 'fastboot oem lock begin' command. You can't flash a system image with a locked bootloader. Let me know how it goes!
Click to expand...
Click to collapse
I run the unlock command, with my unique key but I get ..
...
(bootloader) Check 'Allow OEM Unlock' in Developer Options.
FAILED (remote failure)
finished. total time: 0.013s
And since I can't get into the phone, I can't therefore check the "allow OEM unclock"
Have you tried any erase data commands or reset commands? Perhaps you could reset the phone so kingroot is un-installed and then try to turn on the phone. Short of that I'm stuck for ideas really, accept booting into 'fastboot and then erasing all data and factory reset in there. Let me know.
DTLblaze said:
Have you tried any erase data commands or reset commands? Perhaps you could reset the phone so kingroot is un-installed and then try to turn on the phone. Short of that I'm stuck for ideas really, accept booting into 'fastboot and then erasing all data and factory reset in there. Let me know.
Click to expand...
Click to collapse
I tried the wipe data/factory reset and wipe cache partition from the stock recovery.
And if I try from fastboot:-
C:\Program Files (x86)\Minimal ADB and Fastboot>fastboot erase userdata
(bootloader) has-slot:userdata: not found
erasing 'userdata'...
OKAY [ 0.196s]
finished. total time: 0.198s
And then a fastboot reboot.
Back to the now standard "start up failed"
And the
AP Fastboot Flash Mode (Secure)
hab check failed for boot
Failed to verify hab image boot
failed to validate boot image
ERROR: Failed to pass validation, backup to fastboot
Fastboot reason: Fall-through from normal boot mode
Sickaxis79 said:
Or try this one.
http://forum.xda-developers.com/showthread.php?t=2499926
Click to expand...
Click to collapse
Have downloaded, and tried that - but the crux appears to be the fact that my bootloader is locked and I can't access the OEM checkbox. And therefore the tool itself can't unlock or equally install TWRP.
Unless I'm missing something in it's usage.
sharebubbles said:
I tried the wipe data/factory reset and wipe cache partition from the stock recovery.
And if I try from fastboot:-
C:\Program Files (x86)\Minimal ADB and Fastboot>fastboot erase userdata
(bootloader) has-slot:userdata: not found
erasing 'userdata'...
OKAY [ 0.196s]
finished. total time: 0.198s
And then a fastboot reboot.
Back to the now standard "start up failed"
And the
AP Fastboot Flash Mode (Secure)
hab check failed for boot
Failed to verify hab image boot
failed to validate boot image
ERROR: Failed to pass validation, backup to fastboot
Fastboot reason: Fall-through from normal boot mode
Click to expand...
Click to collapse
That really does sound like you bricked the device. If you where on lollipop software you wouldn't have the issue with check bootloader OEM unlock. If it was me I would either contact Motorola or go to a repair shop and have a motd experienced person take a look at it.
Try this, not necessary for unlock bootloader
Recognized Contributor3,144 posts Thanks: 1,591
Quote:
Originally Posted by sheikh.sami17
but i have locked bootloader. can i flash stock firmware with locked bootloader?
YES you can flash stock Moto roms meant for your model and carrier only.
Also, Never attempt to downgrade.
In this page
http://forum.xda-developers.com/moto-x/moto-x-qa/q-how-to-flash-to-stock-firmware-t3041813
I edit and made one firmware autoflasher for my x play Indian version and flashed successfully . everybody should check sparsechunk files no in flash file of your extracted stock firmware and edit my autoflasher files according to number of sparsechunk files and flash your firmware. It is definitely safe and I flashed my firmware by this but use at your own risk .
https://mega.nz/#!aoETEL7b!6WUe8tXeh...HHohpfYf2duoLc
First you have to download your phone's correct firmware and extract in fastboot folder , and add my autoflasher and check your sparsechunk files number and make changes according to that in autoflasher then save ..Enter your phone in fastboot mode or in bootloader and not in stock recovery and run autoflasher.
IF YOU HAVE ANY DOUBT AT TAKING RISK , CONTACT Motorola AND MAKE EVERYTHING EASY.
sharebubbles said:
Have downloaded, and tried that - but the crux appears to be the fact that my bootloader is locked and I can't access the OEM checkbox. And therefore the tool itself can't unlock or equally install TWRP.
Unless I'm missing something in it's usage.
Click to expand...
Click to collapse
Strange. This is the tool I used to unlock my bootloader.
drmuruga said:
Try this, not necessary for unlock bootloader
Recognized Contributor3,144 posts Thanks: 1,591
Quote:
Originally Posted by sheikh.sami17
but i have locked bootloader. can i flash stock firmware with locked bootloader?
YES you can flash stock Moto roms meant for your model and carrier only.
Also, Never attempt to downgrade.
In this page
http://forum.xda-developers.com/moto-x/moto-x-qa/q-how-to-flash-to-stock-firmware-t3041813
I edit and made one firmware autoflasher for my x play Indian version and flashed successfully . everybody should check sparsechunk files no in flash file of your extracted stock firmware and edit my autoflasher files according to number of sparsechunk files and flash your firmware. It is definitely safe and I flashed my firmware by this but use at your own risk .
https://mega.nz/#!aoETEL7b!6WUe8tXeh...HHohpfYf2duoLc
First you have to download your phone's correct firmware and extract in fastboot folder , and add my autoflasher and check your sparsechunk files number and make changes according to that in autoflasher then save ..Enter your phone in fastboot mode or in bootloader and not in stock recovery and run autoflasher.
IF YOU HAVE ANY DOUBT AT TAKING RISK , CONTACT Motorola AND MAKE EVERYTHING EASY.
Click to expand...
Click to collapse
I've ben used the latest rom so far why trying to flash (and failing) when I look at recovery I have a LPD23.118-10 number that matches to an earlier 5.1.1 rom (I had been upgraded to 6.0.1 via OTA updates) - do I therefore take that LPD ID to mean that I should actually use the 5.1.1 rom - I'm in the UK, so I'm assuming I'd use the UK one rather than Europe (I'm looking at roms on https://github.com/motoxplay/stock).
Thanks
Dooh!!
Looking back at what I was doing yesterday, within the mix of downloading various roms - appears that I was actually using the LPD23.118-10 and NOT the latest.
I figured, I'd give it one last whirl using the latest not expecting much - and hey presto, it's worked. Just in the process of resetting it all up again.
Thanks for everyone who contributed, and a lesson learnt about always rechecking what you attempt (and not to try to root if you're not 100% sure of what I'm doing)
sharebubbles said:
Dooh!!
Looking back at what I was doing yesterday, within the mix of downloading various roms - appears that I was actually using the LPD23.118-10 and NOT the latest.
I figured, I'd give it one last whirl using the latest not expecting much - and hey presto, it's worked. Just in the process of resetting it all up again.
Thanks for everyone who contributed, and a lesson learnt about always rechecking what you attempt (and not to try to root if you're not 100% sure of what I'm doing)
Click to expand...
Click to collapse
And also never try kingroot.
sharebubbles said:
Dooh!!
Looking back at what I was doing yesterday, within the mix of downloading various roms - appears that I was actually using the LPD23.118-10 and NOT the latest.
I figured, I'd give it one last whirl using the latest not expecting much - and hey presto, it's worked. Just in the process of resetting it all up again.
Thanks for everyone who contributed, and a lesson learnt about always rechecking what you attempt (and not to try to root if you're not 100% sure of what I'm doing)
Click to expand...
Click to collapse
Most in the threads suggesting using rsdlite or manual flash/root and you decided to use kingroot,haha.
Welcome back.
Guys I have been searching EVERYWHERE on how to unbrick my moto x play, I used kingroot and it bricked, been a week and I TRIED everything. CAN ANYONE HELP PLEASE!!!!!!
---------- Post added at 05:26 AM ---------- Previous post was at 05:14 AM ----------
Guys I have been searching EVERYWHERE on how to unbrick my moto x play, I used kingroot and it bricked, been a week and I TRIED everything. CAN ANYONE HELP PLEASE!!!!!!
Tried restoring it, deleted everything and the phone is still on bootloader (LOCKED) and i dont even know how to fix it, I know nothing on how to root, friend suggested it, downloaded it, installed it, didnt work and then i restarted my phone and now its stuck on bootloader screen and the screen has the message "Start up failed: your device didnt start up successfully. Use the software repair assisstant on computer to repair your device. Connect your device to your computer to get the Software Repair Assistant." <- Downloaded it, tried it and it was stuck on 6% on repairing, left it over night and it was still on 6%.
ALSO under the message "AP Fastboot Flash Mode(Secure) is there)
Hai same problem for my moto x play ple.......s help contact.7708892303(WhatsApp no.)
pravin kkr said:
Hai same problem for my moto x play ple.......s help contact.7708892303(WhatsApp no.)
Click to expand...
Click to collapse
Download and flash this firmware
https://mega.nz/#!H5YlDCrD!T8tAAW7nHVS-erizRiqg5-Yp_p23hKParMjjHD4diQA credits @kumeipark
Use RSD lite to flash the firmware
http://rsdlite.com/rsd-lite-download/
Moto drivers
http://motorola-mobility-en-in.custhelp.com/app/answers/detail/a_id/88481
If you have problems installing device drivers using Windows 8.1 or Windows 10 follow this guide
https://www.youtube.com/watch?v=gmw86KplqmU
And don't post your contact no. in public forums for everyone to see.
what is the decryption key for the mega link
drmuruga said:
Try this, not necessary for unlock bootloader
Recognized Contributor3,144 posts Thanks: 1,591
Quote:
Originally Posted by sheikh.sami17
but i have locked bootloader. can i flash stock firmware with locked bootloader?
YES you can flash stock Moto roms meant for your model and carrier only.
Also, Never attempt to downgrade.
In this page
http://forum.xda-developers.com/moto-x/moto-x-qa/q-how-to-flash-to-stock-firmware-t3041813
I edit and made one firmware autoflasher for my x play Indian version and flashed successfully . everybody should check sparsechunk files no in flash file of your extracted stock firmware and edit my autoflasher files according to number of sparsechunk files and flash your firmware. It is definitely safe and I flashed my firmware by this but use at your own risk .
https://mega.nz/#!aoETEL7b!6WUe8tXeh...HHohpfYf2duoLc
First you have to download your phone's correct firmware and extract in fastboot folder , and add my autoflasher and check your sparsechunk files number and make changes according to that in autoflasher then save ..Enter your phone in fastboot mode or in bootloader and not in stock recovery and run autoflasher.
IF YOU HAVE ANY DOUBT AT TAKING RISK , CONTACT Motorola AND MAKE EVERYTHING EASY.
Click to expand...
Click to collapse
provide the decryption key

Help please, endless bootloop

I have tried downgraded my phone from nougat, but has ended in at bootloop only showing the red Huawei Logo.
Now i can´t enter recovery, can´t update using 3 button method only thing i can access is fastboot.
My problem is my bootloader is locked and therefore i can´t flash an recovery. And now i cannot figure out how to obtain my product key, so i can unlock the bootloader.
Any1 who can help me with this would be much appreciate.
What did you do exactly to end with endless bootloop?
I used the rollback file from this Thread:
https://forum.xda-developers.com/hu...torial-rollback-n-to-mm-c432-devices-t3563955
Update went fine but afterwards it ended in a bootloop. The only thing i can access is fastboot.
The weird thing is that in fastboot it says my bootlader is unlocked with red, but i cant install an recovery. Its says acess denied and ask if i'm sure my bootloader is unlocked.
And thats why im back to trying to unlock the bootloader but i cant get the product id for my phone when i can't turn in on.. seems hopeless
I suppose that you did 3 button update metod. You have to factory reset phone. Press volume up and power button together and keep pressed until you see erecovery option for factory reset phone. Do it.
KAngelo said:
I have tried downgraded my phone from nougat, but has ended in at bootloop only showing the red Huawei Logo.
Now i can´t enter recovery, can´t update using 3 button method only thing i can access is fastboot.
My problem is my bootloader is locked and therefore i can´t flash an recovery. And now i cannot figure out how to obtain my product key, so i can unlock the bootloader.
Any1 who can help me with this would be much appreciate.
Click to expand...
Click to collapse
Post here IMEI+SN and i can try to get you bootloader unlock code.
gtdaniel said:
Post here IMEI+SN and i can try to get you bootloader unlock code.
Click to expand...
Click to collapse
Imei1: 863066034949799
Imei2: 863066034975810
Can't remember which is the right one
Sn: FUH7N16A08001972
Thank you so much for the help
maka1105 said:
I suppose that you did 3 button update metod. You have to factory reset phone. Press volume up and power button together and keep pressed until you see erecovery option for factory reset phone. Do it.
Click to expand...
Click to collapse
I cant. Have tried all the button combinations to enter both recovery and update mode but nothing works, only vibrates and showing huawei logo. Only thing i can access is fastboot through computer
With huawei extractor extract (from B160 or what ever firmware is your phone) system, boot, and recovery img and flash with adb. Than you have to do reset.
maka1105 said:
With huawei extractor extract (from B160 or what ever firmware is your phone) system, boot, and recovery img and flash with adb. Than you have to do reset.
Click to expand...
Click to collapse
Thanks for the suggestion.
When i try flashing it with adb it starts writing but then says "Failed (remote: Command not allowed)
Should have installed the proper drivers but still not working.
Same thing if try flashing with the L31 toolkit. Here it says "Something went wrong! - Maybe your boot-loader is locked?"
The only thing i can think of, is trying to unlock my bootloader again and see if its work. Even though it says unlocked in fastboot mode. But for that i still need the product id for my phone which i can´t get???
KAngelo said:
Imei1: 863066034949799
Imei2: 863066034975810
Can't remember which is the right one
Sn: FUH7N16A08001972
Thank you so much for the help
Click to expand...
Click to collapse
Your bootloader unlock code is: 1216684107248235
PS: until you unlock bootloader you can not flash anything...
Need Correct Firmware
i downgraded set 7.0 to 6.0 than this problem came
huawei
VNS-L31
imei
869315022035713
866655025440904
i have set not going in fastboot for install TWRP etc
set only going in upgrade mode when i Power UP but i tried but cant install UPDATE.APP via SD card because it always stop at 5% installing update
maplegsm said:
i downgraded set 7.0 to 6.0 than this problem came
huawei
VNS-L31
imei
869315022035713
866655025440904
i have set not going in fastboot for install TWRP etc
set only going in upgrade mode when i Power UP but i tried but cant install UPDATE.APP via SD card because it always stop at 5% installing update
Click to expand...
Click to collapse
You need corect oeminfo...
i restore set in fastboot mode but i cant install twrp or any other recovery
i also need bootloader unlock code
C:\>fastboot devices
3DN7N16427001072 fastboot
C:\>fastboot flash recovery twrp.img
target reported max download size of 471859200 bytes
sending 'recovery' (27434 KB)...
OKAY [ 0.938s]
writing 'recovery'...
FAILED (remote: Command not allowed)
finished. total time: 0.944s
C:\>
C:\>fastboot oem get-bootinfo
...
(bootloader) unlocked
OKAY [ 0.006s]
finished. total time: 0.006s
C:\>
dc unlocker info
Found Phone : HUAWEI VNS-L31
Model : Huawei phone in fastboot mode
IMEI : 869315022035713
Serial NR. : 3DN7N16427001072
Firmware : NRD90M test-keys
IMEI:866655025440904
FB LockState: LOCKED
USER LockState: LOCKED
unlocked
Battery state: 0
delete
gtdaniel said:
Your bootloader unlock code is: 1216684107248235
PS: until you unlock bootloader you can not flash anything...
Click to expand...
Click to collapse
Thanks man! my bootloader is now unlocked
But now i ran in to the next problem. Im able to flash now in adb but i cant seem to enter recovery? I tried flashing many different recoveries and the button combinations to enter them but i cant?
Any idea what to do
I Have the same problem. I cannot flash any recovery and files .img How to fix that?
I can boot to fastboot.
bootloop also, can do nothing
gtdaniel said:
Your bootloader unlock code is: 1216684107248235
PS: until you unlock bootloader you can not flash anything...
Click to expand...
Click to collapse
hello sir, could i also get the unlock bootloader code. RIGHT know, my phone in bootloop state. I have my bootloader lock, I can't enter fastboot. Nothing can do. here is my imei and sn:
imei: 860514035314136
sn : FKC4C16916001923
denduro said:
hello sir, could i also get the unlock bootloader code. RIGHT know, my phone in bootloop state. I have my bootloader lock, I can't enter fastboot. Nothing can do. here is my imei and sn:
imei: 860514035314136
sn : FKC4C16916001923
Click to expand...
Click to collapse
unlock bootloader code is not eligible for that IMEI (14 days limit...)
anyway, if you can not enter in fastboot mode, you can do anything...
go to service center or try DC Phoenix via a small fee (10-20 euros)...
i can enter fastboot, what next?
gtdaniel said:
unlock bootloader code is not eligible for that IMEI (14 days limit...)
anyway, if you can not enter in fastboot mode, you can do anything...
go to service center or try DC Phoenix via a small fee (10-20 euros)...
Click to expand...
Click to collapse
I have entered fastboot. It said phone unlocked, FRP unlock. Then, what else I have to do?
denduro said:
I have entered fastboot. It said phone unlocked, FRP unlock. Then, what else I have to do?
Click to expand...
Click to collapse
go to service center or try DC Phoenix...
for unlock code you have to login your Huawei ID atleast 14 days...
i suppose you can't do that...

PRA-LX1 stuck in bootloop, can't be turned off - locked, access to fastboot only!

Hello xda,
my cousin owns the P8Lite (PRA-LX1) and gave it to me to attempt unbricking it.
The device is stuck in a permanent bootloop, showing the Huawei logo. When pressing the power button for ~10s, it simply turns itself on again (even when not connected to a PC or the wall socket), which to me is very strange behaviour but I do not own a Huawei device.
I can get to fastboot (https://ibb.co/ixPtAn).
ADB does not recognize the device.
Fastboot does not let me boot a temporary recovery (be it the stock one or twrp), neither does it allow me to flash any file.
I have tried downloading the update.app file onto the root directory of the sd card and force the phone into the update mode (power, vol+, vol- at the same time) but to no avail.
Since it is not my own device and I cannot boot into Android at all, I have no way of getting to the IMEI of the device, which I would need to unlock the bootloader.
Is this device permanently bricked and a lost cause or is there still hope?
dejavecue said:
I have no way of getting to the IMEI of the device, which I would need to unlock the bootloader.
Click to expand...
Click to collapse
Hi,
IMEI should be engraved on the lower SIM tray if it's the original one.
HTH
badhabitsdiehard said:
Hi,
IMEI should be engraved on the lower SIM tray if it's the original one.
HTH
Click to expand...
Click to collapse
Oh yes I got the original one. But since I cannot boot, I cannot get the S/N that is apparently required as well.
Edit: Got the SN through fastboot devices.
Now the phone won't accept the unlock code that I got from huawei's website. It still says
PS C:\Users\*\Downloads\unlock bootloader> fastboot oem unlock ************
...
FAILED (remote: Command not allowed)
finished. total time: 0.017s
PS C:\Users\*\Downloads\unlock bootloader>
Click to expand...
Click to collapse
dejavecue said:
Got the SN through fastboot devices.
Now the phone won't accept the unlock code that I got from huawei's website.
Click to expand...
Click to collapse
Hi, sorry for the delay.
Try this, if not already tried: fastboot oem emmc_diag
It should check the status of emmc and tell you if it's ok.
Does this command: fastboot oem lock-state info work on your phone?
And putting the code Huawei sent you in this one fastboot oem frp-unlock?
Thank you for your comment:
badhabitsdiehard said:
Try this, if not already tried: fastboot oem emmc_diag
It should check the status of emmc and tell you if it's ok.
Click to expand...
Click to collapse
Code:
$ fastboot oem lock-state info
...
(bootloader) FB LockState: LOCKED
(bootloader) USER LockState: LOCKED
OKAY [ 0.012s]
finished. total time: 0.014s
badhabitsdiehard said:
Does this command: fastboot oem lock-state info work on your phone?
And putting the code Huawei sent you in this one fastboot oem frp-unlock?
Click to expand...
Click to collapse
Code:
$ fastboot oem frp-unlock {password censored}
...
FAILED (remote: password matching failed!!)
finished. total time: 0.211s
It is definitely the code I got from the Huawei Website.

image verification error, TWRP Install failed.

Hello, I'm new here so if I miss any Forum rules please let me know.
TL;DR: I unlocked the bootloader of my VNS-L31 with PotatoNV and now I get the Message FAILED (remote: 'image verification error')
So, i want to install a Custom ROM in order to get OTG Support for my Smartphone. I'm new to this but as I figured out I need to do the following Steps.
1. Unlock Bootloader using PotatoNV
2. Install TWRP
3. Root via SU
3. Install CustomRom via TWRP
I think I managed to unlock my bootloader as I get the "your device cant be trusted" message every time I boot. I can enter fastboot mode with ADB and my device is recognized when it's in fastboot mode. when I try now to install TWRP (i tried different versions) I get the following message:
J:\Smartphone\TWRP\platform-tools_r31.0.2-windows\platform-tools>fastboot flash recovery twrp-3.1.1-0-venus.img
Sending 'recovery' (24464 KB) OKAY [ 0.648s]
Writing 'recovery' FAILED (remote: 'image verification error')
fastboot: error: Command failed
Reading the Forums suggested to relock the Bootloader and then unlock it again in good old " did you turn it off and on again" manner. but when I googled how to relock and unlock I got the warning that a lot of devices cant be unlocked a second time. So should I try to relock it via fastboot ? if I do so, can I unlock it again with the new unlockcode i set in PotatoNV, or do I need to open my phone for Testpoint mode and unlock it with PotatoNV again?
so hopefully i didn't miss any necessary information and someone here can help me or point me in the right direction
greetings
Elfenfreund
PS: Pardon my Writing. It's late and my English is not very trained.
No need to relock. Just unlock it again using the code given by the Potato. Then try flashing again the image.

Categories

Resources