Related
Hello I'm trying to flash stock ROM via adb, specifically cust.img, boot.img, system.img, Because I've bricked my phone and it stuck on huawei logo, but when i try to flash, i got the following error "FAILED (remote: Command not allowed)"
Code:
C:\adb>fastboot flash cust cust.img
target reported max download size of 471859200 bytes
sending 'cust' (304183 KB)...
OKAY [195.875s]
writing 'cust'...
FAILED (remote: Command not allowed)
finished. total time: 195.899s
c:\adb>fastboot flash boot boot.img
target reported max download size of 471859200 bytes
sending 'boot' (21690 KB)...
OKAY [ 13.671s]
writing 'boot'...
FAILED (remote: Command not allowed)
finished. total time: 13.694s
c:\adb>fastboot flash system system.img
target reported max download size of 471859200 bytes
sending sparse 'system' (460798 KB)...
OKAY [314.622s]
writing 'system'...
FAILED (remote: Command not allowed)
finished. total time: 314.665s
Please how I can unbrick my phone and reinstall the firmware
Obs. My bootloader is unlocked and I'm using TWRP recovery
Is your phone really shows Unlocked in red color when it's in fastboot mode?
Was your phone rooted, if yes, with which method?
You should try doing:
fastboot erase cache
fastboot erase userdata
These commands perform the same thing as Factory Reset do.
If it's not working, try to do the "dload" method with your original firmware your phone was shipped with.
Create a folder, called "dload" in your sdcard root, put the UPDATE.APP file of the firmware in it, and without connecting it to PC, press Vol + and Vol - and Power button until it starts flashing the firmware, and see what happens.
In later days, we've got a lot of troubleshooting topic opened up with your problem, the users cannot flash even with unlocked bootloader, and yet, there's no real solution to them.
I suggest that you use Windows 10? If I'm right sometimes this version of Windows cannot be used to flash via adb
I recommend you to use Windows 8.1 or 7 . My best way is of course using Linux
daviddosa said:
Is your phone really shows Unlocked in red color when it's in fastboot mode?
Was your phone rooted, if yes, with which method?
You should try doing:
fastboot erase cache
fastboot erase userdata
These commands perform the same thing as Factory Reset do.
If it's not working, try to do the "dload" method with your original firmware your phone was shipped with.
Create a folder, called "dload" in your sdcard root, put the UPDATE.APP file of the firmware in it, and without connecting it to PC, press Vol + and Vol - and Power button until it starts flashing the firmware, and see what happens..
Click to expand...
Click to collapse
Yes, it shows PHONE unlocked in red name, and I've made the root using an app called kingroot
I've tried to erase cache and userdata using adb but I can't, still got the same error "FAILED (remote: Command not allowed)"
I can't make dload method because I don't have stock recovery, and I can't flash the stock recovery using adb because its keep saying "FAILED (remote: Command not allowed)".
I don't know what to do
sokkoban said:
I suggest that you use Windows 10? If I'm right sometimes this version of Windows cannot be used to flash via adb
I recommend you to use Windows 8.1 or 7 . My best way is of course using Linux
Click to expand...
Click to collapse
I'm using windows 7 is this moment, maybe I try to flash using Linux later
Seems like all the guys with the same problem used KingRoot to root...that is the common thing amongst all.
I dont't think you need the stock recovery to update via the "dload" method, but I'm not sure.
If you don't have your original firmware's UPDATE.APP yet, download it, as well as the Huawei Update Extractor.
Load your file into the program, select ONLY BOOT.IMG, CUST.IMG(if it has one), SYSTEM.IMG and RECOVERY.IMG(optional, if selected, restores original recovery) right click on one, and press Create Flashable Zip.
Copy this to your sdcard and try to flash it.
I did not thest this above method, and don't know it the created flashable zip is really flashable, but I'm running out of possible solutions slowly.
Let us know what happens.
daviddosa said:
Seems like all the guys with the same problem used KingRoot to root...that is the common thing amongst all.
I dont't think you need the stock recovery to update via the "dload" method, but I'm not sure.
If you don't have your original firmware's UPDATE.APP yet, download it, as well as the Huawei Update Extractor.
Load your file into the program, select ONLY BOOT.IMG, CUST.IMG(if it has one), SYSTEM.IMG and RECOVERY.IMG(optional, if selected, restores original recovery) right click on one, and press Create Flashable Zip.
Copy this to your sdcard and try to flash it.
I did not thest this above method, and don't know it the created flashable zip is really flashable, but I'm running out of possible solutions slowly.
Let us know what happens.
Click to expand...
Click to collapse
So I tried to create a flashable zip using the Huawei Update Extractor however, was not possible, it's showing the following message "no suitable files selected. Check profiles.xml"
I've tried also creating flashable zip manually and flash it using TWRP, but TWRP reboot every time I try to flash theses files, that's why I think dload method work only with stock recovery
Hello,
I created the script for flash via fastboot if you want try this method
Extract BOOT.img, Cust.img, Recovery.img, System.img and copy to fastboot folder.(attachment)
Enable developer options and USB debugging
Simply run file FLASH-ALL.bat file
sokkoban said:
Hello,
I created the script for flash via fastboot if you want try this method
Extract BOOT.img, Cust.img, Recovery.img, System.img and copy to fastboot folder.(attachment)
Enable developer options and USB debugging
Simply run file FLASH-ALL.bat file
Click to expand...
Click to collapse
Thanks for the help but this method didn't work, everytime I try to flash the files, I got the same error "FAILED (remote: Command not allowed)” I don't know what is happening my bootloader is unlocked, why I can't flash the files with adb
Code:
target max-download-size: 450MB
sending 'boot' (21690 KB)...
OKAY [ 13.912s]
writing 'boot'...
FAILED (remote: Command not allowed)
finished. total time: 13.919s
target max-download-size: 450MB
sending 'recovery' (34264 KB)...
OKAY [ 21.963s]
writing 'recovery'...
FAILED (remote: Command not allowed)
finished. total time: 21.985s
target max-download-size: 450MB
sending 'cust' (304183 KB)...
OKAY [191.580s]
writing 'cust'...
FAILED (remote: Command not allowed)
finished. total time: 191.603s
target max-download-size: 450MB
Sparse-Flash is enabled!
sending sparse 'system' (460798 KB)...
OKAY [366.120s]
writing 'system'...
FAILED (remote: Command not allowed)
finished. total time: 366.144s
ROM flashed , if all went well
You must be restarted.
If you leave the recovery to hard reset and restart the phone
Created by sokoban. Thank you for using my release
rebooting...
finished. total time: 0.054s
Pressione qualquer tecla para continuar. . .
This is very strange. May be you really have locked bootloader
Post answer from this command in fastboot mode:
Code:
fastboot oem get-bootinfo
sokkoban said:
This is very strange. May be you really have locked bootloader
Post answer from this command in fastboot mode:
Code:
fastboot oem get-bootinfo
Click to expand...
Click to collapse
This was the result
Code:
C:\adb>fastboot oem get-bootinfo
...
(bootloader) unlocked
OKAY [ 0.016s]
finished. total time: 0.016s
As you can see the ADB says that the bootloader is unlocked, but I'm still having trouble
Same issue with Huawei G6-U10
I'm having the same problem with Huawei Ascend G6-U10
Currently running on ROM b146, since it has some issues I was trying to downgrade or upgrade ( there is a b330 out).
I'm not an expert.
This morning I've unlocked the boot loader and then tried to flash a couple of different ROMs and I always get the same error message:
c:\adb>fastboot flash BOOT ./G6-U10verb330/boot.img
target reported max download size of 536870912 bytes
sending 'BOOT' (9696 KB)...
OKAY [ 0.310s]
writing 'BOOT'...
FAILED (remote: Command not allowed)
finished. total time: 0.321s
c:\adb>fastboot oem get-bootinfo
(bootloader) Bootloader Lock State: UNLOCKED
(bootloader) System State: Bootloader in UNLOCKED state
(bootloader) Bootloader Version: 001.001.000
I'm guessing this is not a G6-U10 specific issue so if anyone can give any hint it'll be very appreciated.
Thanks.
I have the same problem with a honor 4x.
Rooted with kingroot. We haven't writing permission in /system. That's why we can't install the recovery. If you try to install superSU and update the binary I guess you get an error.
Now the question is: how we can do to make writeble /system with fast boot?
"mount -o rw,remount -t ext3 /dev/block/xxxxxxxxx /system" in terminal doesn't work...
Similar thing happened to me. Even if command for showing unlocked bootloader said it was unlocked that was false because I used Kingroot previously. Only thing that helped was to unlock the bootloader through fastboot again. Then it was really unlocked and I could flash recovery (in my case TWRP) which before I was unable to.
Diego Sousa said:
This was the result
Code:
C:\adb>fastboot oem get-bootinfo
...
(bootloader) unlocked
OKAY [ 0.016s]
finished. total time: 0.016s
As you can see the ADB says that the bootloader is unlocked, but I'm still having trouble
Click to expand...
Click to collapse
Have you tried it with linux yet?
And have you used the Update.APP and dload method?
Maybe a driver problem? Have administrator rights? And debug mode on?
Try to connect your phone (power on) to the pc and wait to be recognized. In cmd type this:
Code:
adb devices
It has to show you your serial number right? If doesn't your device is not being recognized by adb.
Next type:
Code:
adb reboot-bootloader
This will restart your phone into fastboot and now you can type "fastboot devices" like first command and it has to show you your serial number again.
Try rebooting into bl with this, not by plugin in the phone, and install the rom again
Huawei P8 Lite
Hello I have a problem with my phone. I do not know how to hell I fix it.
It says error cannot load system.img but still I can install boot.img and others.
I¨d tryed that "dload" with update.app doesnt work.
phone is Huawei P8 Lite
this is my first time here
Have you tried install it in twrp? You don't have a twrp backup of stock rom?
In this case if you go in the Huawei eRecovery you can restore stock rom and twrp will be overwrited downloading the last rom , i tried it with my p8 lite 2017 .
Tuki2 said:
Hello I have a problem with my phone. I do not know how to hell I fix it.
It says error cannot load system.img but still I can install boot.img and others.
I¨d tryed that "dload" with update.app doesnt work.
phone is Huawei P8 Lite
this is my first time here
Click to expand...
Click to collapse
What are you using to go into fastboot mode? Is it ADB from Android SDK?? It turns out that using ADB from Android SDK lets you flash small files but not large files... I suggest you try flashing the file through Minimal ADB & Fastboot
sokkoban said:
Hello,
I created the script for flash via fastboot if you want try this method
Extract BOOT.img, Cust.img, Recovery.img, System.img and copy to fastboot folder.(attachment)
Enable developer options and USB debugging
Simply run file FLASH-ALL.bat file
Click to expand...
Click to collapse
i have the same issue as well, but just with Cust.img
Ahh, hind sight is a wonderful thing.
After trying to use kingroot to get root access, it failed. And a few days later after rebooting.
I'm now stuck at bootup with Start Up Failed.
hab check failed for boot
Failed to verify hab image boot
failed to validate boot image
I've now tried lot's of different things, over the last few hours.
RSDLite (show device brings no thing up)
Unlock bootloader (request key, but error regarding OEM unlock not being set - no access to now set it LOL)
Downloaded stock X_Play_UK_Retail_XT1562_LPD23.118-10_CFC.xml.zip, and tried using various guides on fastboot but keep getting remote failed.
I'm on stock recovery (obviously still locked).
Any thoughts, or hope from anyone?
Obviously, not sure what support Motorola would provide for what is essentially my own fault?
Have you tried manually flashing each bit of the stock firmware/image. That might help. There's a good guide here which I followed to unbrick my device. Just follow the instructions http://theunlockr.com/2015/09/22/how-to-unroot-the-motorola-moto-x-play/
Or try this one.
http://forum.xda-developers.com/showthread.php?t=2499926
Tried the first fastboot oem lock begin but get ... (althought my phone is locked already)
(bootloader) Not supported command in current status!
FAILED (remote failure)
finished. total time: 0.063s
So stepping to next command, I get:
C:\Program Files (x86)\Minimal ADB and Fastboot>fastboot flash partition gpt.bin
(bootloader) has-slotartition: not found
target reported max download size of 268435456 bytes
sending 'partition' (32 KB)...
OKAY [ 0.166s]
writing 'partition'...
(bootloader) Preflash validation failed
FAILED (remote failure)
finished. total time: 1.078s
sharebubbles said:
Tried the first fastboot oem lock begin but get ... (althought my phone is locked already)
(bootloader) Not supported command in current status!
FAILED (remote failure)
finished. total time: 0.063s
So stepping to next command, I get:
C:\Program Files (x86)\Minimal ADB and Fastboot>fastboot flash partition gpt.bin
(bootloader) has-slotartition: not found
target reported max download size of 268435456 bytes
sending 'partition' (32 KB)...
OKAY [ 0.166s]
writing 'partition'...
(bootloader) Preflash validation failed
FAILED (remote failure)
finished. total time: 1.078s
Click to expand...
Click to collapse
I think you need to unlock the bootloader and then start with the 'fastboot oem lock begin' command. You can't flash a system image with a locked bootloader. Let me know how it goes!
DTLblaze said:
I think you need to unlock the bootloader and then start with the 'fastboot oem lock begin' command. You can't flash a system image with a locked bootloader. Let me know how it goes!
Click to expand...
Click to collapse
I run the unlock command, with my unique key but I get ..
...
(bootloader) Check 'Allow OEM Unlock' in Developer Options.
FAILED (remote failure)
finished. total time: 0.013s
And since I can't get into the phone, I can't therefore check the "allow OEM unclock"
Have you tried any erase data commands or reset commands? Perhaps you could reset the phone so kingroot is un-installed and then try to turn on the phone. Short of that I'm stuck for ideas really, accept booting into 'fastboot and then erasing all data and factory reset in there. Let me know.
DTLblaze said:
Have you tried any erase data commands or reset commands? Perhaps you could reset the phone so kingroot is un-installed and then try to turn on the phone. Short of that I'm stuck for ideas really, accept booting into 'fastboot and then erasing all data and factory reset in there. Let me know.
Click to expand...
Click to collapse
I tried the wipe data/factory reset and wipe cache partition from the stock recovery.
And if I try from fastboot:-
C:\Program Files (x86)\Minimal ADB and Fastboot>fastboot erase userdata
(bootloader) has-slot:userdata: not found
erasing 'userdata'...
OKAY [ 0.196s]
finished. total time: 0.198s
And then a fastboot reboot.
Back to the now standard "start up failed"
And the
AP Fastboot Flash Mode (Secure)
hab check failed for boot
Failed to verify hab image boot
failed to validate boot image
ERROR: Failed to pass validation, backup to fastboot
Fastboot reason: Fall-through from normal boot mode
Sickaxis79 said:
Or try this one.
http://forum.xda-developers.com/showthread.php?t=2499926
Click to expand...
Click to collapse
Have downloaded, and tried that - but the crux appears to be the fact that my bootloader is locked and I can't access the OEM checkbox. And therefore the tool itself can't unlock or equally install TWRP.
Unless I'm missing something in it's usage.
sharebubbles said:
I tried the wipe data/factory reset and wipe cache partition from the stock recovery.
And if I try from fastboot:-
C:\Program Files (x86)\Minimal ADB and Fastboot>fastboot erase userdata
(bootloader) has-slot:userdata: not found
erasing 'userdata'...
OKAY [ 0.196s]
finished. total time: 0.198s
And then a fastboot reboot.
Back to the now standard "start up failed"
And the
AP Fastboot Flash Mode (Secure)
hab check failed for boot
Failed to verify hab image boot
failed to validate boot image
ERROR: Failed to pass validation, backup to fastboot
Fastboot reason: Fall-through from normal boot mode
Click to expand...
Click to collapse
That really does sound like you bricked the device. If you where on lollipop software you wouldn't have the issue with check bootloader OEM unlock. If it was me I would either contact Motorola or go to a repair shop and have a motd experienced person take a look at it.
Try this, not necessary for unlock bootloader
Recognized Contributor3,144 posts Thanks: 1,591
Quote:
Originally Posted by sheikh.sami17
but i have locked bootloader. can i flash stock firmware with locked bootloader?
YES you can flash stock Moto roms meant for your model and carrier only.
Also, Never attempt to downgrade.
In this page
http://forum.xda-developers.com/moto-x/moto-x-qa/q-how-to-flash-to-stock-firmware-t3041813
I edit and made one firmware autoflasher for my x play Indian version and flashed successfully . everybody should check sparsechunk files no in flash file of your extracted stock firmware and edit my autoflasher files according to number of sparsechunk files and flash your firmware. It is definitely safe and I flashed my firmware by this but use at your own risk .
https://mega.nz/#!aoETEL7b!6WUe8tXeh...HHohpfYf2duoLc
First you have to download your phone's correct firmware and extract in fastboot folder , and add my autoflasher and check your sparsechunk files number and make changes according to that in autoflasher then save ..Enter your phone in fastboot mode or in bootloader and not in stock recovery and run autoflasher.
IF YOU HAVE ANY DOUBT AT TAKING RISK , CONTACT Motorola AND MAKE EVERYTHING EASY.
sharebubbles said:
Have downloaded, and tried that - but the crux appears to be the fact that my bootloader is locked and I can't access the OEM checkbox. And therefore the tool itself can't unlock or equally install TWRP.
Unless I'm missing something in it's usage.
Click to expand...
Click to collapse
Strange. This is the tool I used to unlock my bootloader.
drmuruga said:
Try this, not necessary for unlock bootloader
Recognized Contributor3,144 posts Thanks: 1,591
Quote:
Originally Posted by sheikh.sami17
but i have locked bootloader. can i flash stock firmware with locked bootloader?
YES you can flash stock Moto roms meant for your model and carrier only.
Also, Never attempt to downgrade.
In this page
http://forum.xda-developers.com/moto-x/moto-x-qa/q-how-to-flash-to-stock-firmware-t3041813
I edit and made one firmware autoflasher for my x play Indian version and flashed successfully . everybody should check sparsechunk files no in flash file of your extracted stock firmware and edit my autoflasher files according to number of sparsechunk files and flash your firmware. It is definitely safe and I flashed my firmware by this but use at your own risk .
https://mega.nz/#!aoETEL7b!6WUe8tXeh...HHohpfYf2duoLc
First you have to download your phone's correct firmware and extract in fastboot folder , and add my autoflasher and check your sparsechunk files number and make changes according to that in autoflasher then save ..Enter your phone in fastboot mode or in bootloader and not in stock recovery and run autoflasher.
IF YOU HAVE ANY DOUBT AT TAKING RISK , CONTACT Motorola AND MAKE EVERYTHING EASY.
Click to expand...
Click to collapse
I've ben used the latest rom so far why trying to flash (and failing) when I look at recovery I have a LPD23.118-10 number that matches to an earlier 5.1.1 rom (I had been upgraded to 6.0.1 via OTA updates) - do I therefore take that LPD ID to mean that I should actually use the 5.1.1 rom - I'm in the UK, so I'm assuming I'd use the UK one rather than Europe (I'm looking at roms on https://github.com/motoxplay/stock).
Thanks
Dooh!!
Looking back at what I was doing yesterday, within the mix of downloading various roms - appears that I was actually using the LPD23.118-10 and NOT the latest.
I figured, I'd give it one last whirl using the latest not expecting much - and hey presto, it's worked. Just in the process of resetting it all up again.
Thanks for everyone who contributed, and a lesson learnt about always rechecking what you attempt (and not to try to root if you're not 100% sure of what I'm doing)
sharebubbles said:
Dooh!!
Looking back at what I was doing yesterday, within the mix of downloading various roms - appears that I was actually using the LPD23.118-10 and NOT the latest.
I figured, I'd give it one last whirl using the latest not expecting much - and hey presto, it's worked. Just in the process of resetting it all up again.
Thanks for everyone who contributed, and a lesson learnt about always rechecking what you attempt (and not to try to root if you're not 100% sure of what I'm doing)
Click to expand...
Click to collapse
And also never try kingroot.
sharebubbles said:
Dooh!!
Looking back at what I was doing yesterday, within the mix of downloading various roms - appears that I was actually using the LPD23.118-10 and NOT the latest.
I figured, I'd give it one last whirl using the latest not expecting much - and hey presto, it's worked. Just in the process of resetting it all up again.
Thanks for everyone who contributed, and a lesson learnt about always rechecking what you attempt (and not to try to root if you're not 100% sure of what I'm doing)
Click to expand...
Click to collapse
Most in the threads suggesting using rsdlite or manual flash/root and you decided to use kingroot,haha.
Welcome back.
Guys I have been searching EVERYWHERE on how to unbrick my moto x play, I used kingroot and it bricked, been a week and I TRIED everything. CAN ANYONE HELP PLEASE!!!!!!
---------- Post added at 05:26 AM ---------- Previous post was at 05:14 AM ----------
Guys I have been searching EVERYWHERE on how to unbrick my moto x play, I used kingroot and it bricked, been a week and I TRIED everything. CAN ANYONE HELP PLEASE!!!!!!
Tried restoring it, deleted everything and the phone is still on bootloader (LOCKED) and i dont even know how to fix it, I know nothing on how to root, friend suggested it, downloaded it, installed it, didnt work and then i restarted my phone and now its stuck on bootloader screen and the screen has the message "Start up failed: your device didnt start up successfully. Use the software repair assisstant on computer to repair your device. Connect your device to your computer to get the Software Repair Assistant." <- Downloaded it, tried it and it was stuck on 6% on repairing, left it over night and it was still on 6%.
ALSO under the message "AP Fastboot Flash Mode(Secure) is there)
Hai same problem for my moto x play ple.......s help contact.7708892303(WhatsApp no.)
pravin kkr said:
Hai same problem for my moto x play ple.......s help contact.7708892303(WhatsApp no.)
Click to expand...
Click to collapse
Download and flash this firmware
https://mega.nz/#!H5YlDCrD!T8tAAW7nHVS-erizRiqg5-Yp_p23hKParMjjHD4diQA credits @kumeipark
Use RSD lite to flash the firmware
http://rsdlite.com/rsd-lite-download/
Moto drivers
http://motorola-mobility-en-in.custhelp.com/app/answers/detail/a_id/88481
If you have problems installing device drivers using Windows 8.1 or Windows 10 follow this guide
https://www.youtube.com/watch?v=gmw86KplqmU
And don't post your contact no. in public forums for everyone to see.
what is the decryption key for the mega link
drmuruga said:
Try this, not necessary for unlock bootloader
Recognized Contributor3,144 posts Thanks: 1,591
Quote:
Originally Posted by sheikh.sami17
but i have locked bootloader. can i flash stock firmware with locked bootloader?
YES you can flash stock Moto roms meant for your model and carrier only.
Also, Never attempt to downgrade.
In this page
http://forum.xda-developers.com/moto-x/moto-x-qa/q-how-to-flash-to-stock-firmware-t3041813
I edit and made one firmware autoflasher for my x play Indian version and flashed successfully . everybody should check sparsechunk files no in flash file of your extracted stock firmware and edit my autoflasher files according to number of sparsechunk files and flash your firmware. It is definitely safe and I flashed my firmware by this but use at your own risk .
https://mega.nz/#!aoETEL7b!6WUe8tXeh...HHohpfYf2duoLc
First you have to download your phone's correct firmware and extract in fastboot folder , and add my autoflasher and check your sparsechunk files number and make changes according to that in autoflasher then save ..Enter your phone in fastboot mode or in bootloader and not in stock recovery and run autoflasher.
IF YOU HAVE ANY DOUBT AT TAKING RISK , CONTACT Motorola AND MAKE EVERYTHING EASY.
Click to expand...
Click to collapse
provide the decryption key
Guide for installing new security update with fastboot and with a bootloader-unlocked Pixel XL.
This is basically the same thing as usual but with the new structure.
If you have modified a little the stock android (hosts file, root, kernel, etc.), you may experience a fail in OTA update;
If you have a bootloop/soft brick/not sure of the state of your android system;
This is the solution.
This WILL NOT delete your data and apps. This will remove your custom kernel/root/hosts/recovery through (which is a good thing because it will be clean then).
I assume you already have anything to do fastboot command. If not, see this good thread.
1) Download your system image for Marlin (Pixel XL) on google website.
For November update, there are 3 versions:
NDE63U Europe
NDE63V US, except Verizon
NDE63X Verizon
2) Unzip the file marlin-nde63v-factory-a66866ba.zip
3) Unzip inside the new directory (marlin-nde63v) the image-marlin-nde63v.zip
4) Reboot into bootloader
Code:
adb reboot bootloader
5) Execute fastboot commands (assuming the bin is on your PATH)
Code:
fastboot flash bootloader bootloader-marlin-*.img
fastboot reboot-bootloader
fastboot flash radio radio-marlin-*.img
fastboot reboot-bootloader
fastboot flash boot_a boot.img
fastboot flash boot_b boot.img
fastboot flash system system.img
fastboot flash system_b system_other.img
fastboot flash vendor vendor.img
fastboot flash modem modem.img
fastboot reboot
Here we go, you have a fresh unrooted vanilla android with latest security patch.
6) To add TWRP and Root:
Code:
fastboot boot /path/to/twrp.img
In TWRP, install twrp.zip
Reboot into the installed recovery
In TWRP, install supersu.zip
Root thread for more information.
TWRP thread for more information.
** Reserved **
cam30era said:
@firewave,
Thanks for posting the guide. Just like Nexus devices except for the slot files. After unzipping the factory image, I do notice 15 additional files (other than boot, system, vendor, etc) that I've never seen before on a Nexus device. Do you happen to know what those are for, and why we don't flash them if doing a manual fastboot flash?
Thanks, in advance....
Click to expand...
Click to collapse
Other files are more for complete reset. There are for example, time-zones data, default crypto key, default /sdcard, bootlocker state, etc.
Only aboot.img is obscure for me. I'm at work so I can't dig into it, but I updated my pixel xl without issue that way.
I'm also add EX kernel and root again without issue.
firewave said:
Other files are more for complete reset. There are for example, time-zones data, default crypto key, default /sdcard, bootlocker state, etc.
Only aboot.img is obscure for me. I'm at work so I can't dig into it, but I updated my pixel xl without issue that way.
I'm also add EX kernel and root again without issue.
Click to expand...
Click to collapse
aboot is actually part of the bootloader.
death2all110 said:
aboot is actually part of the bootloader.
Click to expand...
Click to collapse
yep, it's why I'm unsure what to do with. Probably nothing.
I will loopmount the file at home and see.
Will this FDR the phone or just apply the update? I am currently on a Verizon Pixel XL Rooted/Unlocked and on the P build. Thanks for any information.
wx9kvh said:
Will this FDR the phone or just apply the update? I am currently on a Verizon Pixel XL Rooted/Unlocked and on the P build. Thanks for any information.
Click to expand...
Click to collapse
In the op in bold, he said it will not erase your data or apps
C:\android>fastboot flash bootloader bootloader-marlin-*.img
error: cannot load 'bootloader-marlin-*.img'
C:\android>fastboot reboot-bootloader
rebooting into bootloader...
OKAY [ 0.047s]
finished. total time: 0.105s
C:\android>fastboot flash radio radio-marlin-*.img
< waiting for any device >
error: cannot load 'radio-marlin-*.img'
C:\android>fastboot reboot-bootloader
rebooting into bootloader...
OKAY [ 0.047s]
finished. total time: 0.048s
C:\android>fastboot flash boot boot.img
target didn't report max-download-size
sending 'boot' (26405 KB)...
FAILED (command write failed (No error))
finished. total time: 0.001s
C:\android>fastboot flash system system.img
< waiting for any device >
target reported max download size of 536870912 bytes
I am getting the above error but it proceeds to do all other commands. Then I get hung up at the Google screen. Any suggestions? I can get into the bootloader. I've tried the fastboot commands twice now...same result
dablitzkrieg said:
C:\android>fastboot flash bootloader bootloader-marlin-*.img
error: cannot load 'bootloader-marlin-*.img'
C:\android>fastboot reboot-bootloader
rebooting into bootloader...
OKAY [ 0.047s]
finished. total time: 0.105s
C:\android>fastboot flash radio radio-marlin-*.img
< waiting for any device >
error: cannot load 'radio-marlin-*.img'
C:\android>fastboot reboot-bootloader
rebooting into bootloader...
OKAY [ 0.047s]
finished. total time: 0.048s
C:\android>fastboot flash boot boot.img
target didn't report max-download-size
sending 'boot' (26405 KB)...
FAILED (command write failed (No error))
finished. total time: 0.001s
C:\android>fastboot flash system system.img
< waiting for any device >
target reported max download size of 536870912 bytes
I am getting the above error but it proceeds to do all other commands. Then I get hung up at the Google screen. Any suggestions? I can get into the bootloader. I've tried the fastboot commands twice now...same result
Click to expand...
Click to collapse
Yes! Your using an old ADB / Fastboot combo...
See my post here: http://forum.xda-developers.com/showpost.php?p=69578798&postcount=74
Post if that does not resolve.
Also stop using wildcards "*". Use absolute paths.
chapelfreak said:
In the op in bold, he said it will not erase your data or apps
Click to expand...
Click to collapse
That was not in the original post. I screenshot the OP, the part about adding a kernel or custom ROM at the bottom was also added. But thanks for the update.
wx9kvh said:
That was not in the original post. I screenshot the OP, the part about adding a kernel or custom ROM at the bottom was also added. But thanks for the update.
Click to expand...
Click to collapse
That makes sense, our posts are an hour apart or so.
Scott said:
Yes! Your using an old ADB / Fastboot combo...
See my post here: http://forum.xda-developers.com/showpost.php?p=69578798&postcount=74
Post if that does not resolve.
Also stop using wildcards "*". Use absolute paths.
Click to expand...
Click to collapse
I appreciate the help. The link you provided me, I've downloaded it, but for some reason cant launch the app after I unzip the file. I've been at this for like 4 hours. I've tried so many different things and can't get past the Google screen. Please help
I was able to utilize the old tool. I'm all set. Thanks
chapelfreak said:
That makes sense, our posts are an hour apart or so.
Click to expand...
Click to collapse
Lol. No big deal haha.
Scott said:
Yes! Your using an old ADB / Fastboot combo...
See my post here: http://forum.xda-developers.com/showpost.php?p=69578798&postcount=74
Post if that does not resolve.
Also stop using wildcards "*". Use absolute paths.
Click to expand...
Click to collapse
Scott...can I flash the radio.img from V to the Verizon X. This radio is horrible
ADB Sideload Works too
Alternatively, use the instructions found on this page followed by a re-flash of your preferred kernel and a fastboot boottoroot to regain root.
https://developers.google.com/android/nexus/ota
So i just followed all of these instructions, and when going into about phone, it shows that i am now on an N build and still with the October security patch. What did i miss?
Update :
I believe I fixed the issue. The little window with the commands in it for some reason had scrolled up and I missed the flashing the "bootloader-marlin-*" step.
Update 2 :
I am now on X with the November security update. GREAT GUIDE!
Followed it to a T and soft bricked mine so now trying to find a way to fix or toss it out the windows haha. Just a heads up guys.
Ended up using the skipsoft tool and pushing a factory update same results but lost data/apps no biggie.
This is odd i followed the instructions trying to flash X to my phone coming from NDE63P and somehow ended up on NDE63N (Ignore this i missed a command)
What steps do I need to add if I want to completely restore back to factory settings (format userdata)? Or would it be the same to just factory reset through the newly restored stock recovery?
hello friends I have the motorola g5 plus xt1680 by telcel. I have the bootloader blocked and I also have many files in memory that I do not want to lose.
I got a security patch which I downloaded and installed correctly, after updating my mistake I let the cell phone completely discharge, reaching the battery at 0%, after this I can not turn on the device stays in the motorola logo.
I have already tried to flash firmwares using adb but I can not mark me error, errors similar to this one:
fastboot flash partition gpt.bin
target reported max download size of 534773760 bytes
sending 'partition' (45 KB)...
OKAY [ -0.000s]
writing 'partition'...
(bootloader) Validating 'gpt.default.xml'
(bootloader) Security version downgrade
(bootloader) Image primary_gpt failed validation
(bootloader) Preflash validation failed
(bootloader) Cancelling
gpt.default.xml
FAILED (remote failure)
finished. total time: 0.066s
for more than download firmware images, all of them make me the same error and I can not find the solution on the internet.
I have been several days and can not find a solution, it is very important not to lose my files that I have on my cell phone.
Would any of you help me please?
Have u tried using the Moto Smart Assist to reflash the phone? It should automatically detect the correct firmware for you.
But if you want to flash one of the firmwares you have, leave out the "fastboot flash partition gpt.bin" and "fastboot flash bootloader bootloader.img" commands and the flash should work fine. Apparently the update you took updated the partition tables on your device so you either have to flash without downgrading or flash using the exact firmware that the gpt.bin file is using.
If you need to get your files off first, download TWRP here, and then copy it into the directory where you have fastboot and run
"fastboot flash recovery twrp-3.2.3-1-potter.img" and then scroll down with the vol keys until you get reboot to recovery. (If it doesn't flash correctly you may have to push vol key down to reboot bootloader and try flash again) After inside TWRP, you should be able to use your password to decrypt your data and then use a USB cable to get your things off the phone or take a TWRP backup of your data / internal storage partitions and restore those after a fresh flash.
Drkmatr1984 said:
Have u tried using the Moto Smart Assist to reflash the phone? It should automatically detect the correct firmware for you.
But if you want to flash one of the firmwares you have, leave out the "fastboot flash partition gpt.bin" and "fastboot flash bootloader bootloader.img" commands and the flash should work fine. Apparently the update you took updated the partition tables on your device so you either have to flash without downgrading or flash using the exact firmware that the gpt.bin file is using.
If you need to get your files off first, download TWRP here, and then copy it into the directory where you have fastboot and run
"fastboot flash recovery twrp-3.2.3-1-potter.img" and then scroll down with the vol keys until you get reboot to recovery. (If it doesn't flash correctly you may have to push vol key down to reboot bootloader and try flash again) After inside TWRP, you should be able to use your password to decrypt your data and then use a USB cable to get your things off the phone or take a TWRP backup of your data / internal storage partitions and restore those after a fresh flash.
Click to expand...
Click to collapse
thanks, I had already tried to revive my phone with moto smart assist but the software tells me that my phone is not compatible.
I can install twrp if I have the bootloader blocked or I need to open the bootloader to use twrp? but when I open the bootloader my phone restarts from the factory that will erase all my files
I think I've already got the most recent security patch that is updated, apparently this is:
https://mega.nz/#!jxUEXazJ!TVU8n458ZZwd5TfP12I_uEvslYgGc5vakyUaOeSqMOs
can I install that version on my cellphone without any risk ?
then I can flash it without losing my data by omitting the command fastboot erase userdata or is it more advisable to use the ocpion of twrp to recover my data as you explain my friend?
Thank you very much for the help
Well, if the bootloader is locked, then you can't flash TWRP until you unlock it, which you can't do because you can't get into the system to enable OEM unlocking from developer options. So you're pretty limited to what you can do...
I believe fastboot flashing everything using the exact same firmware as your most recent update, but omitting the gpt.bin, bootloader, and userdata commands would work.
I tried to flash the last ota for the motorola g5 plus and now I can install almost everything but when it comes time to flash the following commands it marks me error:
fastboot erase customize
fastboot erase logo
and now how do I fix that I reboot the device and it keeps giving me boot on the motorola logo
c:\Herramientas ADB\platform-tools>fastboot erase customize
erasing 'customize'...
bootloader Permission denied
FAILED remote failure
finished. total time: 0.006s
c:\Herramientas ADB\platform-tools>fastboot erase clogo
erasing 'clogo'...
bootloader Permission denied
FAILED remote failure
finished. total time: 0.005s
and now how can I solve that someone help me
july48 said:
I tried to flash the last ota for the motorola g5 plus and now I can install almost everything but when it comes time to flash the following commands it marks me error:
fastboot erase customize
fastboot erase logo
and now how do I fix that I reboot the device and it keeps giving me boot on the motorola logo
c:\Herramientas ADB\platform-tools>fastboot erase customize
erasing 'customize'...
bootloader Permission denied
FAILED remote failure
finished. total time: 0.006s
c:\Herramientas ADB\platform-tools>fastboot erase clogo
erasing 'clogo'...
bootloader Permission denied
FAILED remote failure
finished. total time: 0.005s
and now how can I solve that someone help me
Click to expand...
Click to collapse
Why don't use ADB pull command to pull the data from device and run the all command of flashing except bootloader and gpt.
riyan65 said:
Why don't use ADB pull command to pull the data from device and run the all command of flashing except bootloader and gpt.
Click to expand...
Click to collapse
I think the problem is he can't get past bootloader so no ADB commands for him to have access to, and his bootloader is locked and since his system won't boot he can't turn on OEM unlocking to unlock it to flash TWRP or something similar to give him ADB commands.
july48 said:
I tried to flash the last ota for the motorola g5 plus and now I can install almost everything but when it comes time to flash the following commands it marks me error:
fastboot erase customize
fastboot erase logo
and now how do I fix that I reboot the device and it keeps giving me boot on the motorola logo
c:\Herramientas ADB\platform-tools>fastboot erase customize
erasing 'customize'...
bootloader Permission denied
FAILED remote failure
finished. total time: 0.006s
c:\Herramientas ADB\platform-tools>fastboot erase clogo
erasing 'clogo'...
bootloader Permission denied
FAILED remote failure
finished. total time: 0.005s
and now how can I solve that someone help me
Click to expand...
Click to collapse
Your problems are not related to the errors for "customize" and "clogo". These entries are for customazions made by Moto Maker and it's normal that they fail if you don't have any of these.
If your device doesn't boot you may have downgraded your bootloader in the past.
I have already tried to omit the bootloader and gpt commands, and I still have the same problems only in that part of the code, having the bootloader blocked limits me a lot, I do not know if I have to wait for the firmware of my phone company Telcel to flash it by adb and see if only so I retrieve the phone.
I do not know what else to try if there is any other solution
july48 said:
I have already tried to omit the bootloader and gpt commands, and I still have the same problems only in that part of the code, having the bootloader blocked limits me a lot, I do not know if I have to wait for the firmware of my phone company Telcel to flash it by adb and see if only so I retrieve the phone.
I do not know what else to try if there is any other solution
Click to expand...
Click to collapse
If you have the most recent firmware you don't need to omit the bootloader and gpt commands, and the clogo and customize commands almost always fail, you don't even really need them.
If it's still not booting I'm not sure what else to tell you to try. Someone in another one of my posts suggested trying to boot with "fastboot boot boot.img" and then possibly you could switch on OEM unlocking from the developer options, then reboot, unlock bootloader, and flash again or flash TWRP and use recovery to recover from there.
But I'm not guaranteeing that will do anything other than be stuck at boot logo.
Hey guys, I need help with this Asus Zenfone 2 Laser that:
Cannot boot to any OS (asus logo pops up, freezes, and then a blue screen flashes for a really short period, before it powers off, see video here.)
Can't download the unlock app to unlock bootloader
Can't access ADB
Cannot access Recovery mode
Can't "factory reset", apply update over ADB, etc.
Bootloader is locked
Can't flash custom recovery, boot TWRP, or really anything...
See fastboot reference below for more info
Code:
$ fastboot boot twrp-3.7.0_9-0-Z00T.img
Sending 'boot.img' (31066 KB) OKAY [ 0.987s]
Booting FAILED (remote: 'unlock device to use this command')
fastboot: error: Command failed
$ fastboot flash recovery twrp-3.7.0_9-0-Z00T.img
Sending 'recovery' (31066 KB) OKAY [ 0.987s]
Writing 'recovery' FAILED (remote: 'Permission denied, phone is protected')
fastboot: error: Command failed
$ fastboot flash boot boot.img # (Original boot.img from factory image)
Warning: skip copying boot image avb footer (boot partition size: 0, boot image size: 17980722).
Sending 'boot' (17559 KB) OKAY [ 1.478s]
Writing 'boot' FAILED (remote: 'Permission denied, phone is protected')
fastboot: error: Command failed
$ fastboot flashing unlock
FAILED (remote: 'unknown command')
fastboot: error: Command failed
$ fastboot oem device-info
(bootloader) Device unlocked: false
(bootloader) Charger screen enabled: false
(bootloader) Display panel:
OKAY [ 0.003s]
Finished. Total time: 0.003s
As someone who has only worked with Google Pixel phones in the past, I'm very frustrated for a few reasons.
Firstly, why the hell is the ONLY WAY to unlock a bootloader through an app that was released in such a clandestine, under-the-table way?
Second, why is the manufacturer gatekeeping the recovery files? The only way I was able to find the stock recovery.img is through a comment on a Reddit post (ironically posted by an ASUS Employee).
Third, I've been scouring the internet for many, many days trying to find any kind of emergency recovery method, but every single tutorial acts on the assumption that the bootloader is unlocked, and that boot.img, recovery.img, etc. can be flashed.
Enough about the frustration. Now let's talk about what I've tried so far.
I tried ASUS Flash Tool (Finding ADB drivers was a whole different fiasco for this device), and came up empty handed, as it doesn't detect the device when in fastboot mode.
I tried using fastboot to flash boot, recovery, system, fastboot, and dnx/ifwi, to no avail.
I tried booting into recovery via `fastboot reboot recovery`, `fastboot reboot-recovery`, `fastboot oem reboot-recovery`, and by holding Vol Down while booting up. They all give the same result, which is just an instant (<1 second) reboot. My best guess is that recovery.img is either missing or badly corrupt, so the bootloader just gives up and exits immediately.
Please help. I don't want an expensive paperweight sitting in my drawer just because of a bootloop that wasn't my fault (seriously this device just bootlooped itself one day, I didn't flash a custom rom, root or anything like that).
Any help is appreciated,
Thanks in advance
you can flash on locked bootloader in EDL mode. search in the forum, don't hesitate to ask for clarity on search results. I give you a starting point.
(don't read the whole thread, it will only confuse you)
https://forum.xda-developers.com/t/...image-dump-file-raw-bin.4543217/post-88139417
alecxs said:
you can flash on locked bootloader in EDL mode. search in the forum, don't hesitate to ask for clarity on search results. I give you a starting point.
(don't read the whole thread, it will only confuse you)
https://forum.xda-developers.com/t/...image-dump-file-raw-bin.4543217/post-88139417
Click to expand...
Click to collapse
Probably a dumb question, but how can I put my device into EDL mode?
I've tried many key combinations in conjunction with plugging it into the computer, and I've tried connecting it without a battery.
if nothing else works you need to figure out test points
https://forum.xda-developers.com/t/...ed-to-unlock-bootloader.4531349/post-87944673
you still have fastboot? try this for EDL mode.
Code:
fastboot oem enter-dload
Good news and bad news. Good news is: I was able to enter EDL mode.
Bad news is, apparently my entire partition scheme was messed up, and upon running "edl w gpt gptboth0.bin", fastboot no longer works.
I have tried flashing aboot using edl ("edl w aboot emmc_appsboot.mbn") and it's not working.
Not to mention that it is almost impossible to find the firmware file with all the factory files such as "emmc_appsboot.mbn". The place where I got my file seemed very sketchy and I'm not surprised if the reason it's not working is because it's the wrong file.
Once again, this is a result of ASUS gatekeeping their recovery files to service centers to drive up repair sales.
If anyone has a link, or would like to provide a donor file, it would be VERY much appreciated.
what is inside official download?
https://www.asus.com/supportonly/asus zenfone 2 laser (ze551kl)/helpdesk_bios
alecxs said:
what is inside official download?
https://www.asus.com/supportonly/asus zenfone 2 laser (ze551kl)/helpdesk_bios
Click to expand...
Click to collapse
So yes, I was able to get fastboot back. However, I am now facing another issue.
In order to get fastboot back, I had to run this command
Bash:
edl qfil rawprogram0.xml patch0.xml image_dir
This seemed fine at first, but now, running "edl printgpt" returns nothing. Somehow, the phone is able to boot to fastboot without any GPT partitions visible.
However, when I try to flash gpt_main0, or gpt_both0, the phone now becomes unbootable.
This means, if I try to create a partition table to flash recovery onto, appsboot (and by extension, fastboot) no longer works.
Code:
$ fastboot flash recovery recovery.img
Sending 'recovery' (18115 KB) OKAY [ 0.581s]
Writing 'recovery' FAILED (remote: 'partition table doesn't exist')
fastboot: error: Command failed
"partition table doesn't exist"
If I try to create the partition table, the phone refuses to boot...
OS were
sj-dan said:
So yes, I was able to get fastboot back. However, I am now facing another issue.
In order to get fastboot back, I had to run this command
Bash:
edl qfil rawprogram0.xml patch0.xml image_dir
This seemed fine at first, but now, running "edl printgpt" returns nothing. Somehow, the phone is able to boot to fastboot without any GPT partitions visible.
However, when I try to flash gpt_main0, or gpt_both0, the phone now becomes unbootable.
This means, if I try to create a partition table to flash recovery onto, appsboot (and by extension, fastboot) no longer works.
Code:
$ fastboot flash recovery recovery.img
Sending 'recovery' (18115 KB) OKAY [ 0.581s]
Writing 'recovery' FAILED (remote: 'partition table doesn't exist')
fastboot: error: Command failed
"partition table doesn't exist"
If I try to create the partition table, the phone refuses to boot...
Click to expand...
Click to collapse
So we're you able to find a fix in any way? I find myself in just about the same situation tho for different reasons. I have a radiant max 5g att device i moronicaly tried to download a gsi using the dsu updater, but forgot to unlock bootloader or even enable USB debugging before attempt. So OS system is crashing an saying 'device corrupted' on boot attempt. Recovery mode gets the same result. Was able to use the bugjaegar app to connect ad run the bootloader but every repair attempt is blocked by the fact the USB debugging isn't on. To make matters worse I accidentky hit boot fastbootd command instead of normal and whatever that did wiped out my ability to even connect with bootloader so I'm kind of stuck.
faisaliteb said:
Mod. edit: spammer gone. alecxs
I found many tutorials about fixing bootloops on the Nexus but they all seem to require an unlocked bootloader.
The bootloader on the device is locked. I can see the device in fastboot devices but I can't unlock it.
Any idea how to repair this? Can I somehow flash a factory image onto the device even though OEM unlock is disabled? There is no data on the device that would need to be preserved. I'm ideally looking for a Linux-based solution. more info... ***
Click to expand...
Click to collapse
Yeah man I've been looking at this problem for over a week now and can't find much online at all to help. Except for this EDLmode some devices can boot into, and apparently you can flash a locked system using this emergency download mode. I dunno still researching.