How to hard reset Huawei tablet S7 when turn on it ask for about email nad password
any recovery or flashing method to remove this /////
I tried to upload the file you need, but it wont let me, pm me I will send it to you I had the same problem I will send you the file and instructions on how to get it done
Hi Sapperpipo, can you send me the hard reset procedure too? Pls PM me thanks!
Not sure if this will help:
http://wiki.modaco.com/index.php/Huawei_Firmware_S7
http://www.taskjohann.com/2011/11/factory-reset-for-huawei-s7-tablet.html
I have tried to use the quoted 2nd link, downloaded the dload file and used it. somehow on the middle of the installation process it stops and all the button lights start to blink faster than their initial frequency when the progress bar is going. i don't know what the fix is for this. i have a feeling that this can help me get back my lost 8gb internal SD if i would have been able to flash it successfully on my ideos7.
has anybody tried this already, would be happy to know.
Blinkers
Do not use battery. Use only power connector. First press back and power on and after a few sec leave power button. You should see a white bar. Leave Back button and disconnect charger. Keep stock firmware in external sdcard formatted to FAT32 under dload and make sure you have only unlmt.cfg and along with UPDATA.APP and upg.
Reconnect charger and press power on. If the flashing does not start try again. Fast blinking happened to me, say after 5 bars or may be 6. After rooting device I tried some mod and ended up in a mess. Had to start all over again. But it started and went thru properly after two tries.
After trying this a few times, My S7 keeps rebooting. not stable, need to find another Rom..
---------- Post added at 05:34 PM ---------- Previous post was at 05:15 PM ----------
Link to new berlarus rom S7 slim.
Gonna flash and see now.
http://www.mediafire.com/?r98ck9f0l2d46x2
Nish4 said:
After trying this a few times, My S7 keeps rebooting. not stable, need to find another Rom..
---------- Post added at 05:34 PM ---------- Previous post was at 05:15 PM ----------
Link to new berlarus rom S7 slim.
Gonna flash and see now.
http://www.mediafire.com/?r98ck9f0l2d46x2
Click to expand...
Click to collapse
So have u try dis,stable or what ?? result ??
Hello I tried to flash dorimanx 11.2 kernel onto lgg2 with cloudy g2 2.2. It is the T-mobile LGG2 so D801.
I tried to flash using twrp. it said flash was successful. The screen came up with
[900] Fastboot mode started.
when I plug the phone into my computer it says
--reset--
--postchaerge--
When I go to devices on my computer it has under unspecified "Android" and it says there are no drivers installed for it, though lg g2 drivers are on my computer and I've been using them lately.
My phone does not stay off. It automatically boots to LG logo then to fastboot mode
If I hold down power and volume. It goes to LG screen and stays there for 5-10 seconds then the screen goes blank and the red LED indicator starts flashing. It seems to keep doing this until I release the power and volume down and then it goes to LG to fast boot.
If I reboot the phone by holding power+vol down and when the LG logo appears release both and then press them again it goes to factory data reset screen.
Thanks for any help, KipKipK
Okay, I waited overnight and no replies. Has no one seen this before. Is this phone dead. I will be sitting at my computer for the next few hours if someone would help walk me through something
*** update
tried to get into download mode this morning. power + vol up plugged into PC
IT WORKED! However it only had the download screen up for a few seconds when it changed to firmware update.
Going from the top of the screen down it says.
1 firmware update.
2 then has a connection symbol with rotating circles around it
3 it says DO not unplug the USB connection until the process is complete.
4 Then a progress bar at 0% that isn't moving
5 Lastly it has a panel that says USER B100 and a few lines down ROOTED
Under devices it is now detected as LG AndroidNet Phone
Under device manager it says under ports. LGE AndroidNet USB Serial Port (COM14)
you Are OK my friend don't worry ... now you should flash the original firmware for your phone ... read here carfully and you should be just fine
http://forum.xda-developers.com/showthread.php?t=2432476&highlight=can+i+use+kdz+files
there is 2 ways to flash the firmware
the best way is the tot file way its faster and always work fine
Good luck . don't worry
---------- Post added at 01:08 PM ---------- Previous post was at 01:02 PM ----------
your download mode is fine don't misss there just power of your phone and charge it
read the post carfully
download all what you need and last step connect the cable and go to download screen to flash
if the process didn't start at the bigenning remove the usb cable and insert it again while in download mode and after you click the flash button.
---------- Post added at 01:13 PM ---------- Previous post was at 01:08 PM ----------
http://forum.xda-developers.com/showthread.php?t=2797190
https://www.youtube.com/watch?v=4X_ovKnu-FA
https://www.youtube.com/watch?v=hVLd-HlqveE
https://www.youtube.com/watch?v=wJtcPNklrfw
---------- Post added at 01:16 PM ---------- Previous post was at 01:13 PM ----------
you can also try to go to TWRP again first (before flashing original firmware)
http://forum.xda-developers.com/showthread.php?t=2534981
Awesome. I'll follow that guide + what you said to do and inform you how it goes.
*** THANK YOU! phone is revived. Time to start the process over again and figure out where I went wrong.
I have no idea how this happened since i just did this yesterday and it worked perfectly but i'm in a boot loop now.
1. I got stock
2. updated to 5.0.2
3. rooted
4. installed auto rec
5. rebooted
6 flashed twrp .
7 restarted. and now i'm in a boot loop.
The only thing the phone does is repeatedly go to lg logo. No LED light on.
I can get to factory reset screen.
It doesn't seem like I can get to download mode. I am trying by holding power button until phone goes and stays black. Then I press up vol button and plug into usb, but it just goes to LG boot loop again.
***Okay. NOW I ****ED UP. turned the phone off again to try and get it into download mode. Now the screen is black and it won't even go to LG screen.
So, It looks like I probably want to try and do the factory reset, which will get me to twrp, if I can get back to the factory reset screen but now the phone is just stuck off. (no blacklight on)
***Because the phone wouldn't turn on I decided to try to remove the battery. Somewhere in the process of removing the back cover the phone decided to start the boot loop again.
- I used this to get to factory reset, which got me to twrp.
- What do I do now? I found some posts that sound similar to what I want but really don't want to mess anything up so i'm just going to wait for a reply
- long term goal is to get cloudy g2 2.2 and dorimanx.
Since I didn't get a reply I just kind of said eff it and flashed the cloud g2 2.2 rom and the KK baseband. Device is now functioning. Time to decide if it is worth getting the kernel
what is the situation now is your phone go to twrp or not what is the situation here .
---------- Post added at 09:26 AM ---------- Previous post was at 09:23 AM ----------
if your phone can go to download mode just flash the original firmware . and tell me what kind of original firmware is it KITKAT or JELLYBEAN and don't upgrade to 5 LP
---------- Post added at 09:34 AM ---------- Previous post was at 09:26 AM ----------
and don't do anything
just you can download your phone twrp model exact model from here
http://www.gregtwallace.com/lgg2-projects/twrp/?version=2.8.7.3
and don't use twrp 3 aor up
we just need TWRP 2.8.7.3 this the best one till now ... i am using it
Yesterday, I flashed stock 4.4 YU5510A(Yureka Plus) ROM to my AO5510(Yureka) which was not working in my phone. Display was flashing up. When i flashed my Stock CM12.1 to my phone using fastboot along with erase commands. Now when i boot up my phone it works fine until i switch off screen or proximity sensor puts screen off durning a active call, now when i turn on screen again touch dont work for lower portion of screen. It works on upper portion. If i restart phone it works fine until i again switch off screen.
Same in TWRP 2.8 touch works until i off screen
In twrp 3.0.0 touch not working
previously everything was fine
I tried everything
Flashing up every rom i got
CM11 CM12 CM12.1
got no solution
Help me please
I am living at long distance from my faimly, i need my phone to talk with them
Help !!!!!!!!!!!!!!!!
something like this
https://youtu.be/T1IZqA-verU
Same thing also hapeeing with me bro please help I have flashed the same thing and now my phone is not working if you got any solution give me
---------- Post added at 01:08 PM ---------- Previous post was at 01:07 PM ----------
I think I have to brick yureka and debrick after that
yureka touch screen problm
Same here I am also facing same problem plzzzz help.I think if we can erase each and every partation.then flash a very fresh flash ROM means format bootloader then the problem should solve.
No I have tried that and bricked my eureka we have to check our device at service center is this hardware or soft ware problem ??? You say have you tried to service center guys
---------- Post added at 06:43 PM ---------- Previous post was at 06:42 PM ----------
I have also unbricked and tried ygdt tool of coolpad
For flashing and SD emmc for booting in fastbootmode
I'm also having same issue.................
Hey there is a problem.. while updating the stock... from updates it was updating and suddenly it went totally black.. its not turning on .. only when i put to charge or connect to PC only that notification lights blinks continuously .. and my volume down button is not working. so i cant see that i can go to boot loader .. so is there any way to get it done???? and i didn't turn on the debug mode on also... please let me know if there is any way to turn on the device... and please let me know why the led lights blinking which is besides finger print sensor.. and also when i connect to PC sounds comes which says its connected.. and when i disconnect sounds comes of disconnection.. and if i hold the power key sounds come of disconnection and connecting ... and while connected to MOTO G4 PLUS i can see in device manger as in other device QHSUB_BULK & Unknown device ... help
There is a guide in the "guides section" for hard bricks
Sent from my Moto G4 using Tapatalk
---------- Post added at 10:46 PM ---------- Previous post was at 10:45 PM ----------
Try this https://r.tapatalk.com/shareLink?ur...share_tid=3657761&share_fid=3793&share_type=t
Sent from my Moto G4 using Tapatalk
Same here after reboot in recovery from stock sept + xposed nougat
---------- Post added at 04:18 PM ---------- Previous post was at 03:41 PM ----------
ccalixtro said:
Same here after reboot in recovery from stock sept + xposed nougat
Click to expand...
Click to collapse
Forget it, already fixed ir with that guide.
Im currently running Xposed Nougat on my phone, I am using Magisk's systemless version though, with ElementalX Kernel. I recommend experimenting with your phone a bit, try flashing elemental X then Xposed. Might work
There is an unbrick guide.. Use it! the bootloader got updated with the patch, therefore, if u downgrade bootloader and update it again, the phone will brick... Use it to unbrick and flash the latest stock!
my redmi note7 bricked again....
this time its not even taking charge...
i was using crdroid rom. then flash the rom (below) after that i also did setup a zip file (i dont think thats cause the issue - link berlow too) then try to boot.... DANG!!!! i am in bootloop for 3rd time.
so, as usual, i was waiting for battery being empty when its empty i will charge for 1 minutes... then go for recovery then wipe the system and boot again with crdroid rom
but when the battery was empty and i try to charge it, my droid wont take charge anymore its just showing - battery bar empty
wipe- dalvik, system,cache (not the data one)
what shall i do? plz help.. i never thought this could happen
one more think, i was using global version
crdroid-https://forum.xda-developers.com/redmi-note-7/development/rom-crdroid-android-6-t3987531 /
miuimix - https://forum.xda-developers.com/redmi-note-7/development/rom-miuimix2-0lavender-t3955854
atlantis concept - https://forum.xda-developers.com/redmi-note-7/development/mod-atlantis-concept-t3964431
i have something... you might want to know
This time, its not stucked... its kinda like - i press power button for bootup THAN logo came for 1 sec and than battery empty bar shows than its shut down...
i tried to go fastboot same thing happen... boot fasboot for 4-5 second than it shutdown itself Sad
nishat islam said:
my redmi note7 bricked again....
this time its not even taking charge...
i was using crdroid rom. then flash the rom (below) after that i also did setup a zip file (i dont think thats cause the issue - link berlow too) then try to boot.... DANG!!!! i am in bootloop for 3rd time.
so, as usual, i was waiting for battery being empty when its empty i will charge for 1 minutes... then go for recovery then wipe the system and boot again with crdroid rom
but when the battery was empty and i try to charge it, my droid wont take charge anymore its just showing - battery bar empty
wipe- dalvik, system,cache (not the data one)
what shall i do? plz help.. i never thought this could happen
one more think, i was using global version
crdroid-https://forum.xda-developers.com/redmi-note-7/development/rom-crdroid-android-6-t3987531 /
miuimix - https://forum.xda-developers.com/redmi-note-7/development/rom-miuimix2-0lavender-t3955854
atlantis concept - https://forum.xda-developers.com/redmi-note-7/development/mod-atlantis-concept-t3964431
Click to expand...
Click to collapse
U come in the recovery!? Which recovery?
Orangenfox have a fastcharge option under settings.
Ur post was 2 am.
Never leave ur phone run empty in a bootloop and look it is full when u play!
joke19 said:
U come in the recovery!? Which recovery?
Orangenfox have a fastcharge option under settings.
Ur post was 2 am.
Never leave ur phone run empty in a bootloop and look it is full when u play!
Click to expand...
Click to collapse
U come in the recovery!? Which recovery? --- orangeFox
Orangenfox have a fastcharge option under settings. --- so? my problemis not on that
Ur post was 2 am. --- what did you mean by that?
look it is full when u play! --- i really dont understand you...
i have something... you might want to know
This time, its not stucked... its kinda like - i press power button for bootup THAN logo came for 1 sec and than battery empty bar shows than its shut down...
i tried to go fastboot same thing happen... boot fasboot for 4-5 second than it shutdown itself Sad
nishat islam said:
U come in the recovery!? Which recovery? --- orangeFox
Orangenfox have a fastcharge option under settings. --- so? my problemis not on that
Ur post was 2 am. --- what did you mean by that?
look it is full when u play! --- i really dont understand you...
i have something... you might want to know
This time, its not stucked... its kinda like - i press power button for bootup THAN logo came for 1 sec and than battery empty bar shows than its shut down...
i tried to go fastboot same thing happen... boot fasboot for 4-5 second than it shutdown itself Sad
Click to expand...
Click to collapse
Sorry I translate simple what I think to English.
U erase the boot.img?
After u flash a rom without error or it shutdown without a boot.img (kernel)?
No kernel no charging!
Maybe edl mode.
I saw somewhere a post, look around.
---------- Post added at 11:53 AM ---------- Previous post was at 11:47 AM ----------
U can enter the recovery mode?
---------- Post added at 12:10 PM ---------- Previous post was at 11:53 AM ----------
https://forum.xda-developers.com/redmi-note-7/how-to/guide-steps-to-unbrick-redmi-note-7-t3922543
---------- Post added at 12:12 PM ---------- Previous post was at 12:10 PM ----------
https://forum.xda-developers.com/redmi-note-7/how-to/how-to-fix-hardbricked-redmi-note-7-t3916512
joke19 said:
Sorry I translate simple what I think to English.
U erase the boot.img?
After u flash a rom without error or it shutdown without a boot.img (kernel)?
No kernel no charging!
Maybe edl mode.
I saw somewhere a post, look around.
---------- Post added at 11:53 AM ---------- Previous post was at 11:47 AM ----------
U can enter the recovery mode?
---------- Post added at 12:10 PM ---------- Previous post was at 11:53 AM ----------
https://forum.xda-developers.com/redmi-note-7/how-to/guide-steps-to-unbrick-redmi-note-7-t3922543
---------- Post added at 12:12 PM ---------- Previous post was at 12:10 PM ----------
https://forum.xda-developers.com/redmi-note-7/how-to/how-to-fix-hardbricked-redmi-note-7-t3916512
Click to expand...
Click to collapse
prog_emmc_firehose_Sdm660_ddr.elf ---- can you get me the file?
after flash the rom, i ran a zip. in that zip, i choose (notkernal) kernal
i dont know, if the boot.img erased... (i dont remember erasing it specifically)
No kernel no charging! --- can we fix that?
Maybe edl mode. i already told you, i cant boot to anything.... neither fastboot, recovery:crying:
i am afraid --- testpoint looks very dangerous to me... who knows what might happen again
dont worry about translating... its good, i think i can understand
nishat islam said:
prog_emmc_firehose_Sdm660_ddr.elf ---- can you get me the file?
after flash the rom, i ran a zip. in that zip, i choose (notkernal) kernal
i dont know, if the boot.img erased... (i dont remember erasing it specifically)
No kernel no charging! --- can we fix that?
Maybe edl mode. i already told you, i cant boot to anything.... neither fastboot, recovery:crying:
i am afraid --- testpoint looks very dangerous to me... who knows what might happen again
dont worry about translating... its good, i think i can understand
Click to expand...
Click to collapse
Ur phone show u a batterybar when u plug in the charger? Test to charge over night. More ideas I don't have in the moment. Good luck
joke19 said:
Ur phone show u a batterybar when u plug in the charger? Test to charge over night. More ideas I don't have in the moment. Good luck
Click to expand...
Click to collapse
i understand... can you just tell me,.how to get in recovery in that case?
i think thats logo problem in charging....
i wanna restart my device as new... what can i do?
nishat islam said:
i understand... can you just tell me,.how to get in recovery in that case?
i think thats logo problem in charging....
i wanna restart my device as new... what can i do?
Click to expand...
Click to collapse
I think you should try going to Mi service center or
Try this
https://www.google.com/amp/s/romprovider.com/2019/09/redmi-note-7-hang-on-logo-bootloop-fix/amp/
!!!!!!!Root2!!!!!! said:
I think you should try going to Mi service center or
Try this
https://www.google.com/amp/s/romprovider.com/2019/09/redmi-note-7-hang-on-logo-bootloop-fix/amp/
Click to expand...
Click to collapse
many many thanks for the guide...
as your link say - i have to go the test point. that means, i will have tear down my device. that seems unnecessay/pretty dangerous. while we have a option for deep flash cable option (JUST FOUND ABOUT IT RECENTLY)
now can you give me a link how to use deeep flash cable & flash my redmi via mi tool(NECESSITIY FILES)? i will be grateful.
THANKS AGAIN
nishat islam said:
many many thanks for the guide...
as your link say - i have to go the test point. that means, i will have tear down my device. that seems unnecessay/pretty dangerous. while we have a option for deep flash cable option (JUST FOUND ABOUT IT RECENTLY)
now can you give me a link how to use deeep flash cable & flash my redmi via mi tool(NECESSITIY FILES)? i will be grateful.
THANKS AGAIN
Click to expand...
Click to collapse
I found this guy in Mi community comments. Guessing he doesn't do it for free.
https://www.facebook.com/empty.cadHP
Edit:- Edl mode is only option you're left with or take your phone to the service center.
!!!!!!!Root2!!!!!! said:
I found this guy in Mi community comments. Guessing he doesn't do it for free.
https://www.facebook.com/empty.cadHP
Edit:- Edl mode is only option you're left with or take your phone to the service center.
Click to expand...
Click to collapse
i think i have 2 option.
1.buy a deep flash cable & flash buy mi tool
2. using testpoint
tho i dont understand these much. i got a feeling both method same
Umm, a quick question..I don't understand, why did you wait for the battery to go empty?
Sent from my lavender using XDA Labs
Why not just visit Xiaomi service center?
!!!!!!!Root2!!!!!! said:
I found this guy in Mi community comments. Guessing he doesn't do it for free.
https://www.facebook.com/empty.cadHP
Edit:- Edl mode is only option you're left with or take your phone to the service center.
Click to expand...
Click to collapse
yeah.. right.
GLAD that rn7 still support testpoint.
do you have any idea, how to do testpoint and flash it by mi flash tool? (i am talking about your persional experience)
ssaikia3 said:
Umm, a quick question..I don't understand, why did you wait for the battery to go empty?
Sent from my lavender using XDA Labs
Click to expand...
Click to collapse
first of all, i am a big stupid droid user:silly: THATS WHY (for the first time using snapdragon thats also a reason)
when i am in bootloop, i cant go to the recovery. so, i wait for battery go empty. when its empty. charge it for 1 minutes than go to recovery THEN wipe + flash everything
now, there might be a alternative... but i dont know them as a newbie:silly:
!!!!!!!Root2!!!!!! said:
Why not just visit Xiaomi service center?
Click to expand...
Click to collapse
i already lost warrent service. thats a reason
and as a student, dont have much money to spend (you know)
if deep flash cable demands high price and testpoint fails too:crying: then i will run for the center
nishat islam said:
first of all, i am a big stupid droid user:silly: THATS WHY (for the first time using snapdragon thats also a reason)
when i am in bootloop, i cant go to the recovery. so, i wait for battery go empty. when its empty. charge it for 1 minutes than go to recovery THEN wipe + flash everything
now, there might be a alternative... but i dont know them as a newbie:silly:
Click to expand...
Click to collapse
Okay, I see! Well, that's not how you do it. I have been flashing roms for a while now and often end up in a bootloop, in that case all I do is hold the power button until the device turns off, and before it turns on I quickly press and hold the volume up, to get in to the recovery. And it works every single time. See, pressing and holding the power button will restart the device nomatter what. So next time when you encounter a bootloop, just press and hold power+vol up until it restarts.
And about the "not charging" issue, it often seems to be not charging, but if you keep it plugged in for a while, it comes back to life.
Sent from my lavender using XDA Labs
nishat islam said:
yeah.. right.
GLAD that rn7 still support testpoint.
do you have any idea, how to do testpoint and flash it by mi flash tool? (i am talking about your persional experience)
Click to expand...
Click to collapse
I've once faced such situation with my old Titan. Bootlogo used to flash and automatic reboot. What I did was, whenever the phone turned off I pressed volume up and power button and it booted into fastboot. Then I flashed stock ROM via fastboot. But that's not the case here..
---------- Post added at 05:01 PM ---------- Previous post was at 04:55 PM ----------
Go through this thread. Maybe you'll find something useful.
https://forum.xda-developers.com/showthread.php?t=2426426
ssaikia3 said:
Okay, I see! Well, that's not how you do it. I have been flashing roms for a while now and often end up in a bootloop, in that case all I do is hold the power button until the device turns off, and before it turns on I quickly press and hold the volume up, to get in to the recovery. And it works every single time. See, pressing and holding the power button will restart the device nomatter what. So next time when you encounter a bootloop, just press and hold power+vol up until it restarts.
And about the "not charging" issue, it often seems to be not charging, but if you keep it plugged in for a while, it comes back to life.
Sent from my lavender using XDA Labs
Click to expand...
Click to collapse
oh wow!!! every piece of information looks new and so valueable for me. i will follow it in next bootloop:silly:
hey, got a question tho. --- bootloops means - it will stuck on bootlogo? OR droid will turn off> THEN on> THEN go for bootlogo (and do this continiously?)
@ just press and hold power+vol up until it [email protected] --- explain the proccess with detail please
IN MY CASE --- its usually turned off > pressing 4-5 second for turn on AND when its on, tried button combination for recovery but no results... IT TURNS OFF anyway
@and about the "not charging" issue, it often seems to be not charging, but if you keep it plugged in for a while, it comes back to [email protected] --- yep 100% true
!!!!!!!Root2!!!!!! said:
I've once faced such situation with my old Titan. Bootlogo used to flash and automatic reboot. What I did was, whenever the phone turned off I pressed volume up and power button and it booted into fastboot. Then I flashed stock ROM via fastboot. But that's not the case here..
---------- Post added at 05:01 PM ---------- Previous post was at 04:55 PM ----------
Go through this thread. Maybe you'll find something useful.
https://forum.xda-developers.com/showthread.php?t=2426426
Click to expand...
Click to collapse
OH... i cant even boot into fastboot tho. Even i did, it doesnt stay on fastboot (current problem)
how did you flash the rom via fastboot? i need it for the future trial