Database Users

[Q] Huawei Ideos S7 Hard Reset????

How to hard reset Huawei tablet S7 when turn on it ask for about email nad password
any recovery or flashing method to remove this /////

I tried to upload the file you need, but it wont let me, pm me I will send it to you I had the same problem I will send you the file and instructions on how to get it done

Hi Sapperpipo, can you send me the hard reset procedure too? Pls PM me thanks!

Not sure if this will help:
http://wiki.modaco.com/index.php/Huawei_Firmware_S7
http://www.taskjohann.com/2011/11/factory-reset-for-huawei-s7-tablet.html

I have tried to use the quoted 2nd link, downloaded the dload file and used it. somehow on the middle of the installation process it stops and all the button lights start to blink faster than their initial frequency when the progress bar is going. i don't know what the fix is for this. i have a feeling that this can help me get back my lost 8gb internal SD if i would have been able to flash it successfully on my ideos7.
has anybody tried this already, would be happy to know.

Blinkers
Do not use battery. Use only power connector. First press back and power on and after a few sec leave power button. You should see a white bar. Leave Back button and disconnect charger. Keep stock firmware in external sdcard formatted to FAT32 under dload and make sure you have only unlmt.cfg and along with UPDATA.APP and upg.
Reconnect charger and press power on. If the flashing does not start try again. Fast blinking happened to me, say after 5 bars or may be 6. After rooting device I tried some mod and ended up in a mess. Had to start all over again. But it started and went thru properly after two tries.

After trying this a few times, My S7 keeps rebooting. not stable, need to find another Rom..
---------- Post added at 05:34 PM ---------- Previous post was at 05:15 PM ----------
Link to new berlarus rom S7 slim.
Gonna flash and see now.
http://www.mediafire.com/?r98ck9f0l2d46x2

Nish4 said:
After trying this a few times, My S7 keeps rebooting. not stable, need to find another Rom..
---------- Post added at 05:34 PM ---------- Previous post was at 05:15 PM ----------
Link to new berlarus rom S7 slim.
Gonna flash and see now.
http://www.mediafire.com/?r98ck9f0l2d46x2
Click to expand...
Click to collapse
So have u try dis,stable or what ?? result ??

G2 wont boot to download

Hello as the title says my phone wont boot into download mode. I got the phone and downgraded it and was able to root it. The phone was working perfectly all day, I plugged the phone in at night and went to sleep and i woke up and the phone was booted to recovery (Philz Touch 6) and when i try to reboot the phone it shows the LG screen then goes straight to recovery if i power off and hold the volume up button the phone still goes into recovery and trying "adb reboot download" wont work, it just hangs in terminal and never completes command.

Sounds like it did an ota update without your permission as lg does try wiping caches data system not I ternal storage your going to have to flash a custom ROM through adb sideload
Sent from my LG-VS980 using Tapatalk
---------- Post added at 11:53 AM ---------- Previous post was at 11:50 AM ----------
Actually never mind it might not work wait for someone with more experience hope you get it working
Sent from my LG-VS980 using Tapatalk

LG G2 Dead and stuck in fastboot with no download mode

I had some problems last night when I wiped my baseband so I reverted to stock using the lg flashtool. I decided to update the software before reinstalling paranoid android. I left the device plugged in and when I installed the official software but when it rebooted , it errored and I was stuck in fastboot mode. I couldn't even get into download mode. I started up adb and decided to flash the recovery through fastboot after some brief reading and now when it reboots , following the lg logo , i get the fastboot stuff again for only a brief second before it shuts down. Also , when I connect the device to the computer , I get a message telling me to format drive (F) which I assume is a problem with the phone. PLEASE GIVE ME SUGGESTIONS. I AM DESPERATE AND FREAKING OUT A LITTLE

seaweedsam said:
I had some problems last night when I wiped my baseband so I reverted to stock using the lg flashtool. I decided to update the software before reinstalling paranoid android. I left the device plugged in and when I installed the official software but when it rebooted , it errored and I was stuck in fastboot mode. I couldn't even get into download mode. I started up adb and decided to flash the recovery through fastboot after some brief reading and now when it reboots , following the lg logo , i get the fastboot stuff again for only a brief second before it shuts down. Also , when I connect the device to the computer , I get a message telling me to format drive (F) which I assume is a problem with the phone. PLEASE GIVE ME SUGGESTIONS. I AM DESPERATE AND FREAKING OUT A LITTLE
Click to expand...
Click to collapse
a little update - the fastboot text says something about boot certificates when it flashes and apparently it doesn't shut down , the screen stays on but displays black. Also , more than just drive (F) appears. I get nearly 20 drives and only one of them works. (E) has a folder title "image" and lists of files

There is a way. I had to fastboot laf and recovery. For my spicific model ofcourse
Sent from my LG-D803 using XDA Premium 4 mobile app
---------- Post added at 04:45 PM ---------- Previous post was at 04:43 PM ----------
As long as it aint a black screen with green blue light u should be ok. Just search how to fastboot laf and recovery
Sent from my LG-D803 using XDA Premium 4 mobile app

Zuk z1 unstoppable boot loop

Hello, please help me someone my lenovo zuk z1 has bricked. i had flash zui 2.3(chinese) and then i am going to my stock firmware bcoz zui 2.3 has some problems after restoring my firmware i am going to locking oem and rebooting it, then i got unstoppable boot loop it is showing only zuk logo again and again...............

jaysingh9518 said:
Hello, please help me someone my lenovo zuk z1 has bricked. i had flash zui 2.3(chinese) and then i am going to my stock firmware bcoz zui 2.3 has some problems after restoring my firmware i am going to locking oem and rebooting it, then i got unstoppable boot loop it is showing only zuk logo again and again...............
Click to expand...
Click to collapse
Try qfil method, between the reboots there is a chance your device gets recognized. Before that: empty your battery completely(otg) and check if bootloop is gone

i have the same issue someone guide please.

kazimriaz said:
i have the same issue someone guide please.
Click to expand...
Click to collapse
Did you tried what I wrote above? A little bit more information what you did can improve the quality of assistance to you as well

Bootloop
strongst said:
Did you tried what I wrote above? A little bit more information what you did can improve the quality of assistance to you as well
Click to expand...
Click to collapse
Even I have the same problem.
I locked The bootloader after installing cm13, and the phone went to bootloop, now I cannot unlock my phone. Somehow I went to fastboot mode and tried all the commands to unlock the phone. And the phone responded "Access denied".
Tried with qfil also and it didn't work. Some or the other error. My phone is dead, someone please help me..

Try this..
Remove battery belt,
To switch off your phone.
Then attach it again,
Keep pressing UP volume button while your phone is off and attach USB.
As your computer detect Qualcomm Port, click on DOWNLOAD button in QFIL & install stock firmware again.
Try at your own risk.

Been there.. Had the same issue..
Exactly the same.. Flashed zui, then mokee and boom.
Unstoppable boot loop. Just zuk logo followed by a small vibration and restart.
I am giving you the solution.
1. Let the battery die. It will take 7,8 hours.
---------- Post added at 04:58 PM ---------- Previous post was at 04:53 PM ----------
2. Download these-
a. Tool all in one
b. Fastboot drivers
c. Lenovo/zuk drivers
d. Pc
e. Twrp 3.0.2(flashable img format)
f. Rom and gapps (download them afterwards only if rom isnt present, You will know it after the process.)
---------- Post added at 05:03 PM ---------- Previous post was at 04:58 PM ----------
Steps.
1. Let the phone die.
Press power button when it stops - this will start the whole bootloop process again.
Do this till there is just a 2 min loop mode ie. It loops for just 2 min,then goes off.
*power + any key combination doesnt work. No twrp and no fastboot mode.
*pressing power button for 30 second to switch off the phone doesnt work.
2. Install all softwares.
---------- Post added at 05:16 PM ---------- Previous post was at 05:03 PM ----------
3. Press vol up and down both and connect usb from pc. It goes to fastboot mode.
*dont remember exactly if it was vol up + vol down OR vol up+ vol down + power. Try both please.
4. See if phone shows up in connected fastboot devices. If not, do this-
a. Remove phone. Check driver status of pc.
b. Retry if all seems right.
5. It connects in fastboot mode.
6. Now let me tell you the basic problem - you have a relocked bootloader courtesy zui.
So, you will have to unlock it again.
*full data gets wiped due to this process. Your internal memory is formatted.
7. Check bootloader status. If its locked, unlock it. Then, flash twrp again.
*flashing twrp isn't compulsory, but we are doing it as an added safety check.
8. If it isn't locked, you are lucky, just flash twrp again.
9. Reboot to recovery from tool all in one.
10. If successful, reboot to system from twrp. If your previous rom is present and it boots up, its great.
Otherwise, you would have a zuk logo that doesn't restart, it stays there continously. Press power button for 30 second to switch off the phone. Download rom and gapps and flash them via external usb through twrp.
---------- Post added at 05:20 PM ---------- Previous post was at 05:16 PM ----------
11. If this fails,there is a method called qfil (as stated by @strongst).
There is also a youtube video for qfil method. Channel is dtech terminal, watch it to see how its done. It also has the links to all files for qfil.
*I am in no way related to dtech terminal. Sorry moderators if i am violating any policy by giving link kf ylutube channel.

I'm in the same situation and found solution as below link
https://forum.xda-developers.com/zuk-z1/help/boot-loop-cyanogen-logo-t3666056

My phone doesnt turn on anymore

Hello,
Sorry I came here with such noob things but I really dont have idea of what Ive done, I rooted my Moto G4 plus and all went good, but then I noticed that I wasnt able to download certain apps because of the root so I wanted to unroot my device and I ended up in twrp recovery wiping my system and had no clue of what I did until I noticed I had no OS. So then I started looking how the hell I was going to get back my OS, and when I was in the twrp UI, I pressed the power button+volume key because I wanted to get back to the recovery screen and the device turned off.
Now the phone doesnt even turn on and the white Led light blinks when I plug it in to the charger but thats the only thing the phone does now. I tried the 2+ minutes power+volume pressing with no success, could you guys please help me?

I was going to suggest the two minute volume down and power button thing but I just noticed you tried it already.
---------- Post added at 07:44 PM ---------- Previous post was at 07:41 PM ----------
Did you hold the volume down button and then press and hold the power button, in that order, for two minutes?

You have hard bricked your device. In TWRP, you can wipe the entire system and the internal storage. I have done it and then I connected my device to the computer. Because of adb drivers, I was able to push/copy the zip file of ROM into the device and then just flashed the ROM and it worked.
Connect the device to the computer and it should hopefully recognize as "qhsusb_bulk" or "qualcommloader" or something like that in the device manager's port options (I am referring to Windows).
Similar thing happened to my device and the LED light would glow when connected to charger. My phone was recognized as qhsusb_bulk by the computer and I followed this tutorial: https://forum.xda-developers.com/moto-g4-plus/how-to/moto-g4-plus-hardbrick-solved-guide-t3657761
There is a youtube video too for the following tutorial in which the creator purposely bricks his device and then brings it back to life. Here is the link to his video: https://www.youtube.com/watch?v=m2NqpY6X-X4
However, your case is different than what happened to me so it may or may not work. Anyways you can give it a shot and I would recommend watching the video first as it will give you a brief idea.
Here is what I understood how the process works (I might be wrong). While flashing image on MediaTek devices through the computer, we switch off the device, connect it to the computer and then flash image without loading the bootloader. Here, we are doing a similar sort of thing and flashing some other bootloader to our device while it's switched off. Then we boot into the new bootloader and then flash the bootloader of our device. Once you have access to the bootloader, then you can pretty much do anything.
Good luck!